Water Resources Department Tender

xi)Baparde KLS

iii)Wada KLS

x)Phansewadi KLS

vii)Manche KLS

iv)Puralgavbandh KLS

Dewatering on BHP basis by using water pump including diversion of stream, providing coffer dams, earthern bunds etc. as may be necessary for foundation and parts of the the works and pumping out water during and after excavation as may be required by using 10.00 to 19.00 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

v)Damalemala KLS

vii)Manche KLS

i)Kelaye KLS

viii)Elaye Bhaskarwadi no.1 KLS

viii)Elaye Bhaskarwadi no.1 KLS

viii)Elaye Bhaskarwadi no.1 KLS

ix)Bagmala KLS

Providing Hearting embankment using selected impervious material from approved borrow areas (Private land­ contractor's own material) in layers including cost of all materials, machinery,labour, all other.

v)Damalemala KLS

ii)Pural Kothar KLS

vi)Naringre KLS

i)Kelaye KLS

i)Baparde KLS

ii)Pural Kothar KLS

iii)Wada KLS

iv)Puralgavbandh KLS

vi)Naringre KLS

i)Kelaye KLS

iv)Puralgavbandh KLS

vi)Naringre KLS

v)Damalemala KLS

Providing and fixing Polypropylene Glass Lined gate consisting of 4 mm thick M.S. sheet of high quality material welded properly on frame consisting of M.S.channel ISMC 150 x 75 to have zero leakage to which M.S.angles of size ISA 50 x 50 x 6 mm, 2 in nos.to be welded vertically and horizontaly ensuring further welding of hinges which will be hinged with M.S.Channel frame sized properly in size 100 X 50 mm, material of all above members should confirm IS 226 & iS 2062 and embedding whole assembly in the concrete by fasteners with skilled workmanship to facilitate the gate operation as per drawing provided. The entire fabrication surface should be smooth ened by sand blasting and then coated first by resin, followed by chopped strand mat to the entire assembly, applying resin on chopped strand PPGL mat, fixing chopped strand mat to the entire assembly for second time, applying resin on the chopped strand mat for second time, applying glass fiber tissue sheet on top surface covered with final coat of resin, curing the same for 2-3 days excluding transportation, etc., complete The gate shall withstand hydrostatic pressure of 4.5 m with adequate factor of safety.

ii)Pural Kothar KLS

ix)Bagmala KLS

vii)Manche KLS

x)Phansewadi KLS

iii)Wada KLS

x)Phansewadi KLS