Tourism And Cultural Affairs Department Tender

Supplying and installing Dustbin dry and wet seperately made as per approved design by architect.( landscape) (Item No.50)

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc. complete. (Item No.5)

Providing and fixing Stone Paving, First Sort in lime mortar 1:1, with size of stone 0.45 cm. x 0.30 cm. x 0.15 cm., as per detailed specifications and drawings or as directed including all stone slabs to of approved quality, hard, even, sound, durable and uniform thickness, the stones to be very finely chisel-dressed on the surface and the course to be of prescribed width, the joints running true, the stones to be laid with joints not exceeding 6 mm. (¼″) thick and to be evenly and firmly bedded flush in mortar on the concrete and no hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing the lime mortar in lime miller, watering and all paving work when handed over to be perfectly clean and free from all mortar stains etc. complete.(Item No.33)

Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50meters or spreading in the compound and cleaning the side etc (including scaffolding) complete (Item No.8)

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete (Item No.10)

Providing and fixing Granite plate engraving 10cm. height letter, figures including painting the letters/ figures with approved colour and shade complete. (Item No.35)

Providing Lime Pointing to stone work in lime mortar 1:1 in Superstructure, as per detailed specifications and drawings or as directed including all face or visible work shall be pointed, unless otherwise specified and shall be done while the mortar is fresh, the mortar shall consists of lime and fine sand shall not be ground fine but sand should be finer, the joints of the pointed work shall be neatly defined by the pointing, the lines shall be regular and uniform in breadth and the joints shall be raised or flat as may directed, preparing the lime mortar with 640 gram pulp of wood apple (Belfruit) per cubic metre of lime mortar as a bonding material, watering and all work when handed over to be perfectly clean and free from all mortar stains etc. complete.(Item No.28)

Providing 12 mm. thick Rough Cast Lime Plaster in single coat in lime mortar 1:1½ in superstructure, as per detailed specifications and drawings or as directed including all joints in masonry and brick work are to be racked out to a depth of at least 20 mm. and the wall to be washed with fresh water and thoroughly wetted for six hours before plastering, the plaster to be applied in an even and uniform coat well pressed in to the joints and to be well beaten for 1½ days with hand tappers, the plaster should also be well sprinkle during the proses of beating with a mixture of 1.10 kg jaggary and 640 gram pulp of wood apple (Belfruit) in 90 to 135 litre of water, the plaster being wetted occasionally with fresh water while the beating is in progress, all exposed angles and junctions with door frame to be carefully finished, all mouldings shall be worked true to template and drawn neat, clean and level, soffits of arches must true arch of circle, preparing the lime mortar in lime miller with 1.60 kg Gugal (a kind of fragrant gum) and 960 gram chopped hemp (fibre of bhendi or tag ) per cubic metre of lime mortar as a bonding material, of lime as a bonding material, scaffolding, watering and all work when handed over to be perfectly clean and free from all mortar stains etc. complete.(Item No.29)

Providing and laying Cast in situ /Ready Mix cement concrete in M20 of trap/ granite /quartzite/ gneiss metal for steps including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.(Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Item No.20)

Providing railing of mild steel angle post 2.0m center to center of section 75mmx75mmx10mm or equivalentI/C section of height 1.05 above bridge surface with minimum anchor length of 30 cm including hold fast of 25 mm diameter MS bar welded at the bottom and concreting of 1:3 : 6 of size 30cmx30cmx30cm with three rows of 40mm B class GI pipe provided at 30 cm on center to center including scaffolding and one coat of anticorrosive paint with two coats of oil painting, curing of concrete etc. complete.(Item No.24)

Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing. leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately)(Item No.41)

Filling Mixture of earth and sludge or manure in the desired proportion in tresnches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded). (Item No.44)

Providing and fixing Teak Wood Ledged Door (1.20 m. x 2.10 m.) with frame of 100 mm. x 125 mm section and Ledged shutters double leaf as per detailed specifications and drawings or as directed including the best quality and well-seasoned Moulmein teak, to be properly framed and mortised together, vertical boards of 38 mm (1½″) thick and 17 cm. (3″) width connected together by 3 horizontal ledges of 38 mm (1½″) thick and 7.5 cm. width screwed across the back of the door, the boards to be planed, tongued and grooved, each leaf hung with 3 iron strap hinges 125 mm. with iron screws, furnished with pair of aldrops 16mm. diameter & 300 mm. length, pair of patent handles 150 mm., pair of tower bolts 10 mm. dia. & 200 mm. length, tower bolt 10 mm. dia. & 200 mm. length, and pair of hooks & eyes 250 mm. all of irons etc. complete.(Item No.36)

Removing iron pipe raling having wooden R.C.C.or C.C. or iron post and stacking the materials as directed etc. complete. (Item No.7)

Providing Ashlar Rough-tooled Masonry of trap / granite stones in lime mortar 1:1½ with size of stone 0.85cm. x0.45cm. x 0.23 cm. in superstructure as per detailed specifications and drawings or as including the stones be of approved quality, colour, hard and free from defect of any kind, the faces exposed to view shall have fine dressed chisel draft, 25 mm. (1″) wide all around the edges and rough tooled between the drafts, and on all beds or joints, which shall not exceed 6 mm. (¼″), the stones shall be set in mortar, the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.(Item No.38)

Lowering down the debris obtained from breaking and removing the cement plaster/burnt brick masonry of the first floor by any means without causing dust nuisance and damage to structure,stacking the same as and where directed including cleaning the site complete.(Item No.14)

Providing coursed rubble masonry first sort of trap/granite/quartzite/gneiss stones in cement mortar 1:6 in super structure including racking out joints on the inside when plastering is to be done, watering and scaffolding etc. complete.(Item No.22)

Removal of plants/ficus grown by pulling out root system embedded in masnory, cutting stem and application of high/gur/lime formulation as specified by the Architect or other patented chemical biocide treatment such as biocide 'Glycel' (isoproplamine salt of glyphosate) or other chemical as specified by the Engineer in charge etc. complete. (Item No.2)

Excavation for foundation in earth,soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means (Item No.17)

Book designing, Publishing and printing. The work involves printing of book/guidebook on fort/monument and its various aspects which would provide authentic and precise tourism-oriented information. This work involves important photographs of the site, art objects, Antiqquites, inscription etc. which would be useful for educating the masses of the rich cultural heritage of the site, region and state, providing 100 pages coloured book as directed by Engineer in Charge/ADA (Item No.51)

Dismantling Brick masonry in lime mortar or cement mortar and stacking the materials as directed with all leads, lifts (including scaffolding) etc. Additional spec. as directed by engineer in charge (Item No.3)

Providing and fixingin position TMT-FE- 500 bar reinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintel spardis, copings, fins, arches etc. as per detailed designs, drawing sand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Item No.25)

Providing and stacking of Ficus benjamina (green) of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-incharge. (Item No.43)

Removal of enamal/ oil paint from plain as well as carved surfaces in interior and extrior of Mandapa, Garbhagriha, and Stamba. (Item No.6)

Providing coursed rubble masonry first sort for pillars of trap coping/ granite/ quartzite/gneiss stones in cement mortar 1:6 including pointing with cement mortar 1:3 scaffolding andwatering etc.complete.(Item No.23)

Providing and fixing Stone Paving, First Sort in lime mortar 1:1, with size of stone 0.30cm. x 0.30 cm. x 0.15 cm., as per detailed specifications and drawings or as directed including all stone slabs to of approved quality, hard, even, sound, durable and uniform thickness, the stones to be very finely chisel-dressed on the surface and the course to be of prescribed width, the joints running true, the stones to be laid with joints not exceeding 6 mm. (¼″) thick and to be evenly and firmly bedded flush in mortar on the concrete and no hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing the lime mortar in lime miller, watering and all paving work when handed over to be perfectly clean and free from all mortar stains etc. complete.(Item No.32)

Providing grouting with lime and fine screened sand slurry in proportion of (1:1) with a proper jet pump pressure including cleaning and washing and packing the existing cracks/holes in stone masonary with lime and fine sand paste in proportion of 1:1 property from down side, filling the slurry in cracks of hole including all necessary material as per requirement to reduce porosity of concrete masonary structure and to increase strength of structure using grouting pipes, groutng m/c, mixer etc. and all relevant safety with all leads and lifts, material, machinery, labour, etc. Complete as per specification and as directed by Engineer in Charge. (Item No.27)

Providing and laying cast in situ 1:1:4 Lime Concrete of broken brick metal for coping or waterproofing as per detailed specifications and drawings or as directed including centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required, with fine aggregate, preparing the lime mortar in lime miller and then mixing with coursed aggregate or surkhi in drum mixer, the concrete must be bitten for two days with pouring water as per specifications, scaffolding, watering and all concrete work when handed over to be perfectly clean and free from all mortar stains, etc. complete.(Item No.26)

Raking out joints of stone masonry surface to the required width and depth, with due care and precaution, by mechanical/manual means, including preparing and cleaning the surface for repointing/ refilling of joints, including disposal of rubbish to the dumping ground with 50 metre lead.(Item No.12)

Providing and laying 100mm dia salt glazed stoneware pipe including fitting such as bends, tees, single junction, double junction slaying, jointing (including excavation and refilling the trenches) complete.(Item No.16)

Providing Fine Coat Of Lime over rough cast plaster in superstructure, as per detailed specifications and drawings or as directed including the finishing coat is to be applied over rough cast plaster and well-polished with trowel, preparing the lime mortar, scaffolding and watering complete. (Item No.30)

Excavation for catch/sidewater gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils..(Item No.15)

Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.(Item No.42)

Carving ornamental work on stone surfaces, including moulding, grooving, chiselling the same part with fine finishing as per existing /similar type of work on wooden surface of any type & size or as directed by engineer in charge etc. including labour charges for carving on wood work. etc.(Item No.39)

Excavation for foundation in earth,soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means (Item No.18)

Preparing and carrying out videography, Documentary and shooting of still photography of extra copies 5"x7" size outdoor and indoor of roads bridges other structures and programme including preliminary survey still shots moving shooting, necessary boards for video shooting hiring of vehicle, equipments for video shooting transportation of all equipments, persons, required for shooting, lightening arrangements as necessary, editing, mixing, tilting, lettering, sounding including cost of coloured casette of approved quality etc complete. (Item No.52)

Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete (Item No.4)

Providing and laying cast in situ 1:2:4 Lime Concrete of trap/ granite/ quartzite/ gneiss metal for coping or slab as per detailed specifications and drawings or as directed including centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required with fine aggregate, preparing the lime mortar in lime miller and then mixing with coursed aggregate in drum mixer, the concrete must be bitten for two days with pouring water, scaffolding, watering and all concrete work when handed over to be perfectly clean and free from all mortar stains, etc. complete.(Item No.31)

Providing and fixing Sand stone DHOLPUR BENCHES , Size L : 59", H : 18", W : 3" in CAMEL BROWN STONE etc. Complete. (Item No.49)

Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area .(Item No.1)

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. (Item No.13)

Providing antitermite treatment to the sides of flooring of the existing building as per I.S.6313 (Part-III) by punching holes 6mm dia. drilled at a distance of 30cm. centre to centre and injecting one percent of chlorodane emulsion concentrate at the rate of 50 ml per hole and sealing by filling putty etc.complete covering 2 years guarantee on bond paper. (Item No.34)

Providing soling using 80 mm size trap metal in 15cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. (Item No.19)

Providing and fixing of retro - reflectorized informatory sign board rectangular/square in shape having area less than 0.9 sq meter made out of 2mm aluminium sheet bonded with white retro reflective sheeting of Class B (type IV High-intensity micro prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retroreflective specified background, border and back side retroreflective symbols, letters numerals, arrows as per IRC- 67-2012 Table No 8.3 supported with back support frame 25mmx25mmx3mm duly painted on back side with two coats of grey stove enamel paint and supported on one number mild steel angle iron post 75mmx75mmx6mm, 3.5 mt long firmly fixed to ground by means of [rperly designed foundation with M25 grade cement concrete 45cm x 45 cm x 60 cm. 60 cm below ground level as per approved drawing. the angle iron post shall be duly painted with one coat of epoxy primer and two coats of painted with one coat of epoxy primer and two coats of paints having alternate black and white bands of 25 cm width including GI fixtures and transportation etc. complete. The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically wielded. Class B (Type IV high intensity micro prismatic grade sheeting - HIP) Sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transperant overlay film and this warranty certificate in orignal should be submitted to enigneer in charge by contractor/supplier a) 600 mm made out of 1.5 mm Aluminium sheet (Item No.48)

Lettering for informatory sign boards etc. complete. (Item No.47)

Providing and applying anti termite treatment of infected trees i/c all branches/leaves by spraying chemical emulsion 0.5% (Chlorpyriphos 20% EC) concentration through power spray machine (@ 100 ml Chlorpyriphos per tree i/c cost of chemical) and as per direction of officer-in-charge.and as per direction of officer-in-charge. (Item No.46)

Providing uncoursed rubble masonry of trap/ granite/ quartzite/ gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external wall including bailing out water manually, striking joints on unexposed faces and watering etc. complete. (Item No.21)

Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Note: The work to be executed on prior approval of Superintending Engineer will be necessary.(Item No.37)

Disposing off / conveying the dismantled material of stone masonry/brick masonry/concrete debris/excavated material/soil murum /rubbish material or vegetation/ grass/ shrubs etc from site to 10 Km, as directed by engineer in charge. (Item No.40)