Tourism And Cultural Affairs Department Tender

Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 One Square Meterr made out of 2mm aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier..(Item No.15)

Maintainance of Newly Developed lawn Area For First 30 days Only (Instant Lawn).(Item No. 23 )

Disposing off/conveying the dismantled materials of stone masonry/brick masonry/ concrete/ debris/ excavated material/ soil murum/ rubbish material or vegetation/ grass/ shrubs etc from site to 5 kms directed by Engineer In Charge.(Item No.14)

Book Designing, Publishing and Printing: The work involves printing of a book / guidebook on the fort / monuments and its various aspects, which would provide authentic and precise tourism oriented information. This work involves important photographs of the site, art objects, antiquities, inscriptions etc., which would be useful for educating the masses of the rich cultural heritage of the site, region and state. providing 100 pages coloured books as directed by engineer in charge / ADA(Item No. 30 )

Providing sandstone Signages in Temple Premises as per drawings including transportation costs, leads and lifts, labour costs for fitting and installation (Does not include GST charges)(Item No. 25 )

Providing Lime Pointing to stone work in lime mortar 1:1 in plinth, as per detailed specifications and drawings or as directed including all face or visible work shall be pointed, unless otherwise specified and shall be done while the mortar is fresh, the mortar shall consists of lime and fine sand shall not be ground fine but sand should be finer, the joints of the pointed work shall be neatly defined by the pointing, the lines shall be regular and uniform in breadth and the joints shall be raised or flat as may directed, preparing the lime mortar with 640 gram pulp of wood apple (Belfruit) per cubic metre of lime mortar as a bonding material, watering and all work when handed over to be perfectly clean and free from all mortar stains etc. complete . (Item No.10)

Providing and laying cast in situ 1:1:4 Lime Concrete of broken brick metal for coping or waterproofing as per detailed specifications and drawings or as directed including centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required, with fine aggregate, preparing the lime mortar in lime miller and then mixing with coursed aggregate or surkhi in drum mixer, the concrete must be bitten for two days with pouring water as per specifications, scaffolding, watering and all concrete work when handed over to be perfectly clean and free from all mortar stains, etc. complete.(Item No.19)

Providing and fixing cautionary / warning sign board of size 60 cm. having shape of equilateral triangle with apex point upwards. prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white back ground, red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border / arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 2 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size etc.complete. 60 cm. equilateral triangle M.S. sheet with Engineering grade,(Item No.17)

Providing sandstone Dustbins in Temple Premises as per drawings including transportation costs, leads and lifts, labour costs for fitting and installation (Does not include GST charges)(Item No. 26 )

Providing and applying two coats TEOS as preventive and water repellent on brick/stone masonry. Including cleaning for removing dirt, patches etc complete.. (Item No.7)

Providing and fixing Teak Wood Ledged Door (1.20 m. x 2.10 m.) with frame of 100 mm x 125 mm section and Ledged shutters double leaf as per detalled specifications and drawings or as directed including the best quality and well-seasoned Moulmein teak, to be properly framed and mortised together, vertical boards of 38 mm (1%) thick and 17 cm. (3") width connected together by 3 horizontal ledges of 38 mm (1%) thick and 7.5 cm, width screwed across the back of the door, the boards to be planed, tongued and grooved, each leaf hung with 3 iron strap hinges 125 mm, with iron screws, furnished with pair of aldrops 16mm diameter & 300 mm length, pair of patent handles 150 mm., pair of tower bolts 10 mm dia. & 200 mm. length, tower bolt 10 mm dia. & 200 mm length, and pair of hooks & eyes 250 mm. all of irons etc complete(Item No. 28 )

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means(Item No.2)

Chemical treatment of stone surface to clean (as per prescribed process and specification.) from yellowness, blackness, algae growth, dust, dirty oil accretions, lime and gypsum deposits, soot, graffiti, joining of gaps, taking out nails and other additions, removal of multiple layer of enamel pait/other paint/ geru layer, filling oh holes/ voids in marble /stone and application of preservatives coating (pva-lavolin base) to prevent superficial decay, under the strict supervision of archaeological chemist or art conservator. For vertical and flat surfaces. (Item No.8)

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge .(Item No.16)

Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately etc. complete. (Item No.12)

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Item No. 27 )

Excavation for planting lawn/ shrub/ flower bed/ hedges/ edges/canna bed in earth, soil of all types, soft murum, including removing the excavated material up to a distance of 50 mtrs for a depth of 30cms. (Item No.20)

Providing sandstone Benches in Temple Premises as per drawings including transportation costs, leads and lifts, labour costs for fitting and installation (Does not include GST charges)(Item No. 24 )

Preparing and carrying out videography, Documentry & shooting of still photographs of Extra copies 5" x 7" size outdoor and indoor of roads, bridges, other structures and programme, including preliminary survey, still shots moving shooting, necessary board for video, shooting, hiring of vehicle, equipment of video shooting, transportation of all equipments, person, required for shooting, lighting arrangement as may be necessary, editing, mixing, titling, lettering, sounding including cost of coloured cassette of approved quality, etc. complete.(Item No. 29 )

Mixing garden soil/silt & manure thoroughly well, watering previous night Planting reqired plant species, lawn grass as directed etc. complete for required depth 5 to 30 cms. for planting lawn/ shrub/flower bed/ hedges/ edges/ canna bed/ ground cover.(Item No. 22 )

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete(Item No.3)

Providing and fixing Stone Paving, First Sort in Lime mortar 1:1, with size of stone 45 cm. x 45 cm. x 2 cm., as per detailed specifications and drawings or as directed including all stone slabs to of approved quality, hard, even, sound, durable and uniform thickness, the stones to be very finely chisel-dressed on the surface and the course to be of prescribed width, the joints running true, the stones to be laid with joints not exceeding 6 mm. (¼") thick and to be evenly and firmly bedded flush in mortar on the concrete and no hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing the cement mortar, watering and all paving work when handed over to be perfectly clean and free from all mortar stains etc. complete (Item No.13)

Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area .(Item No.1)

Scraping out old white wash/colour wash /fungus with patch repairs, washing and cleaning surfaces to get original fracing including leads, lifts, etc complete Item No. 05

Providing and grouting with lime and fine screened sand slurry in proportition of 1:1 with a proper jet pump pressure including cleaning and washing and packing the existing crack/holes in the brick or stone masonry with lime and finesand paste in proportion of 1:1 properly from down side, filling the slurry in cracks or holes including all necessary actions and required tools and machineries, scaffolding, curing etc complete.. (Item No.11)

Filling fresh garden soil/ silt & manure in excavated area of depth 30 cms.( Item No. 21 )

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.(Item No.4)