South Central Railway Tender
... More
The SCR has issued a formal invitation for competitive bids for the South Central Railway project, for Indoor & Outdoor Signalling Works At Akola Jn. In Connection With Provision Of Distributed
Electronic Interlocking At Akola Station For Gauge Conversion In Akola - Akot Section Of
Nanded Division Of S.c.railway. in Akola, Maharashtra, with an estimated contract value of Rs. 6,54,95,166. The bid opening date for this tender is 25-03-2019 and the last date for bid submission is 22-04-2019. Interested bidders for South Central Railway tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
South Central Railway - SCR Tender
Opening Date25 Mar 2019
Closing Date22 Apr 2019
Tender Amount₹ 6,54,95,166
Costs
EMD
₹ 4,77,500Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Indoor & Outdoor Signalling Works At Akola Jn. In Connection With Provision Of Distributed Electronic Interlocking At Akola Station For Gauge Conversion In Akola - Akot Section Of Nanded Division Of S.c.railway.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2700949Tender No
C_SG_C_36_5_142_2019Tender Authority
South Central Railway ViewPurchaser Address
-Website
http://www.scr.indianrailways.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Fixing relay bases on the relay frames erected in Relay Room, Wiring of all types of relays by drawing various sizes of wires/multicore cable, fixing fuses, condensers, resistances, LEDs etc and wiring duly soldering the same as per approved circuit diagram, testing point to point before soldering and after soldering, bunching and lacing as per detailed technical specification. Different colour codes and sizes of wire to be used as per standard practice. This also includes, provision of all PVC sleeves required to be provided. Copper lugs to suit 43 to 16/02 wire and neat bunching, lacing with Modi Nylon / Twine thread and using PVC dotted tape with buttons were required. This also includes soldering all the wires in the relay room with Rosine core of IS Spec. 1921 @40<37@ Tin and 40% Led). Soldering should be done as per standard practice. This also includes inserting the clips, point to point testing as per the circuit diagram and plugging relays to Relay bases (except Inter-cables, relays other materials such as Rosine core, flux, nylon thread. PVC dotted tape should be supplied by the contractor). Point to point testing should be done in the presence of Engineer-in-charge as instructed in two stages, one before soldering and the other after soldering.
200
174
34800
... More
Supply of VF Transformer 1120 : 470 as per RDSO Specification No. IRS.TC.22-76 or latest. (Inspection by consignee)
50
486
24300
... More
Drilling of holes 7.2mm on web of the rail , providing bond wires with PVC coated wire rope. (Bond pins single groove, drilling machine and drill bits has to be supplied by contractor - Wire rope for bonding is covered under supply portion ). (Per Unit=Per Rail Joint)
750
16
12000
... More
Supply of CLS post 140mm dia. 3.5M long to specification IRS.S.6.81.(Inspection by RITES)
8
3039
24312
... More
Fabrication, supply, and designing of situation requiring disconnection noticw/consent/ no consent board of size 36"x24". (details of board required to be collected from site incharge)(Inspection by consignee)
1
3400
3400
... More
Supply of Electronic Interlocking (Hot Standby) for stations with Signaling functions up to 125 1 units as per Function table enclosed along with 15% spares, tools, manuals and Instruments. Distributed E.I to be provided as per EI SPN _195_2005 or latest .Note: Description of various modules, sub assembly and other accessories required as detailed in explanatory note for the above work with unit rate to be furnished by EI manufacturer/contractor as annexure. (Inspection by RDSO) (Distributed EI)
1
5671124
5671124.6
... More
(SOR-601)Supply of Relay rack universal type as per drg.no.S&T/MFT/291 with scaffolding, 39 POWDER COATED with stainless steel nuts and bolts for fixing the racks. Supporting angles, frame mounting triangle base with 'J' bolts and insulation of required numbers complete to suit QN1 / K-50 pre wired tag blocks with suitable inner frames. (Inspection by consignee)
-
-
35889
... More
Earthing and soldering of cable armour.(Per Unit=Per cable)
1000
21
21000
... More
(SOR-2615)Fixing of the following on pre-erected relay racks.
-
-
1118
... More
Supply and fixing of Fire Extinguisher CO2 type (Capacity 5 KG) (Inspection by consignee)
4
8840
35360
... More
Spare cards for HA-SSDAC Axle Counter supplied as above(Inspection by RDSO)
-
-
295747
... More
Supply of 1inch PVC conduct pipe 10feet length(Inspection by consignee)
4
34
136
... More
Fabrication, fixing of required configuration of key in point machine for grouping of crank handle of point machines.
25
82
2050
... More
Laying of 50x6mm G.I. tape for interconnecting of earth electrodes.( This includes excavating of trench to a suitable depth as per site requirement and refilling of the same after laying of GI tape as per requirement
500
148
74000
... More
Excavation of pit, casting concrete foundation and erection of apparatus case full size as per Drg. No. SK/CN/1/89/A/1 and fixing of 1 No.of 'E' type lock for the front door, fixing of one hylam sheet of 1000mm 2 X 940mm X 10mm thickness and painting the apparatus case inside and outside with one coat of redoxide and two coats of aluminium paints (foundation bolts and nuts,' E' type lock, cement, river sand, stone jelly of size 20/20mm, hylam sheet of size 1000mm X 940mm X 10mm, paints, varnish, fixing bolts and nuts and all other miscellaneous material required for the work shall be supplied by the contractor).
100
9875
987530
... More
Excavation of pit and casting concrete foundation as per Drg. No. SG/CN/02/10 using metallic templates, for erection of ground type colour light Shunt signal. (Foundation bolts and nuts, cement, river sand, stone jelly of size 20/25mm and all other miscellaneous materials for the work shall be supplied by the contractor).
4
2518
10074.2
... More
(SOR-1923)Provision and laying in position cement concrete of 1 cement:3 sand:6 graded stone aggregate of 20mm normal size excluding cost of cement, centering and shuttering ( including transportation of all the material) .
-
-
323521
... More
Installation wiring and commissioning of Automatic changeover CLS Panel outdoor type, 60A/ capacity with all necessary materials required for complete installation and including termination of power cables including lead and lift upto site.
3
17700
53100
... More
Training on application software for designing, change in the logics and converting it suitable for system and loading the programme into the working system for alteration of SIP/TOC. The training should be comprehensive with complete document (Per Unit = 60 Man days)
1
75000
75000
... More
Supply of Track lead junction boxes fiber glass as per Drg.No.CWM-00597of F.R.P material to 22 IRS.S.23 specification along with fixtures i.e., on MS angle 50x50x5mm, 0.9 Meters long two numbers of G.I. pipes of 25mm dia. along with nuts and bolts and 500mm long (this includes gromite bushes, 60mm PBT terminal).(Inspection by RITES)
600
1057
634200
... More
Supply of terminal block 1 way PBT 60mm as per RDSO Drg.No. SA.23745/Alt.5 & IRS S.75/91 & IRS.S.23 with latest amendment.(Inspection by RDSO)
800
61
48800
... More
Testing and Commissioning charges of fire alarm system
3
600
1800
... More
Test lamp arrangement in LBs/RE cuttings.(Auto mobile handle type) (Per Unit=Per location)
50
119
5950
... More
Manufacture and supply of Laiminated boards of size 45 cm X 60 cm X 12mm thick for the following: 1. Relay room maintenance board - 1 No. 2 Gaspel truth for signalmen board (1 no. in Telgu and 1 no. in English) (Per Unit=Per board)(Inspection by consignee)
2
1350
2700
... More
Supply of Fibre boards of 'Alter the points immediately on arrival of the train as per GR:3.38 (2)' in bilingual i.e., in Hindi and English of size 4.5" X 12" (Inspection by consignee)
1
1627
1627.5
... More
Excavation of pit, casting concrete foundation as per Drg. No. SC/N/CN@47>47@A/1 using 4 metallic templates, for erection of Colour light Signals upto 4 aspects (foundation bolts, cement, river sand, stone jelly of size 20/20mm dia and all other miscellaneous materials required for the work shall be supplied by the contractor).
16
5008
80131.2
... More
Track bonding diagram on non-transparent acrylic sheet of thickness 4mm with alumunium beading and hanging support with screen printing, lettering and bonding diagram.(Per Unit =per yard per station) (Inspection by consignee)
1
6500
6500
... More
Supply of Alcosign felt notice board of size 4' X 3' with glassy fibre doors having locking arrangements.(Inspection by consignee)
1
6450
6450
... More
Supp ly o f P V C insulated wire multi-strand copper conductor 10 Sq.mm flexible Specn.IRS.S76/89.Amendment No.2 or latest. Each coil of 100 mts length. To be procured from RDSO approved firms (size 140/0.3mm)(Per Unit =Coil)(Inspection by RDSO)
40
9390
375600
... More
Providing crank handle box, wiring, testing as per technical specification including concealed wiring in the wall .
16
3848
61568
... More
Supply of Calling On signal unit complete and 'U' bolts to drawing No. SA.24381 /Adv. (Inspection by RITES)
12
3242
38904
... More
Manufacture and supply of Laiminated boards of size 45 cm X 60 cm X 12mm thick for the following: 1. Battery care board - 1 No. 2. Guide lines for power supply arrangements - 1 No. (Per Unit=Per board)
2
2025
4050
... More
Fabrication and supply of GI termination box for point machine of size 45cm x 23cm x 12 cm, the termination box to be fabricated out of GI sheet 10SWG. The termination box to be provided with 2 nos of M.S. 31 angle of size 50x50x6mm of length 1000mm each and GI pipe of 40 mm dia and length of 450mm. The termination box is also provided with teak wood plank of size 25 mm thicknesses for fixing of terminals. Necessary bolts, nuts and screws are to be provided for fabrication of termination box. The termination box is to be painted double coat with approved quality of paint black enamel on to the outside and to be painted with white enamel in to inside of the box (All materials are to be procured by the contractor).
30
2579
77370
... More
Supply of hylam sheet, resin bonded, 6mm thick, grade P3, to IS specification IS: 2036 of 1974 or latest and size 2400mm X 1200mm of colour approved by the site in-charge (Inspection by consignee)
6
4821
28926
... More
Supply and installation wiring and commissioning of NI panel made out of MS sheet 16 guage 52 of size 1200mm height x length 1200mm x depth 600mm with powder coated and also two relay frames fixed inside the panel for fixing of relays and wiring and all the internal wiring between signals, track circuits upto termination point with 200 wagos duly wired.
1
51200
51200
... More
Cutting of rock to a depth of 300 mm and width of 300 mm where rock is visible from surface concreting 200mmx200mm after laying of cable with 1 cement: 2 sand : 4 graded stone aggregate 20mm nominal 4 size and curing of concrete to the required number of days, except in bridges, culverts, level crossings, track crossings, cable pits, rocky soil including marking of cable alignment, clearing of debris etc., complete to the finished item of work as directed by site in-charge. Drg No.SK/CN/NEW/1. All the material is to be arranged by contractor(Per Unit=RMT)
2500
460
1150000
... More
Supply of PVC wire coils of size 28/03 multi strand (flexible). Specn.IRS.S76/89.Amendment No.2 or latest. Each coil of 100 mts length. To be procured from RDSO approved firms.(Per Unit=Coil)(Inspection by RDSO)
60
1635
98100
... More
Supply of CLS ladder set complete with staging, supports, signal number plate, cast iron ladder base to suit 4.5 Metre post as per drg.no.SA.23153.S.2033.(Inspection by RITES)
8
4422
35376
... More
Fabrication, Supply and fixing of CALLING ON instruction boards, STOP boards with 37 engineering grade reflective sticker of size 600X900X1200 mm GI sheet, with MS angle of 75X75X6 mm with 6 me-ter length including paint, excavation of pit and concrete foundation etc..as per the instructions of sight in- charge. All necessary materials to be arranged by the contractor).
2
3549
7098
... More
Erection of Ground type shunt signal complete including surface base, signal pole, LED aspects/Lenses, bulbs with holders (whichever is applicable), fixing of lens guards, number plate, termination of 7 tail cables, wiring of signal unit, provision of EWS locks and painting of one coat of redoxide and two coats of Aluminium /.enamel paint, (Supply of Ground type shunt signal complete including surface base, signal pole, LED aspects, holder, bulbs and lenses is not covered in this schedule). [Wire PVC 3/0.75mm copper, lens guards, EWS locks, enamelled number plates, bolts and nuts, lead wool, paints and all other miscellaneous materials shall be supplied by the contractor).
4
2097
8388
... More
(SOR-1905-02)When rock is visible for more than 0.5 metre and up to 0.8 metre from the ground level, excavating the trench minimum 0.5 metre and maximum 0.8 mettre, laying of cable and concreting 200 mm x 200 mm over the rocky surface after levelling with soil/sand.(Per Unit=RMT)
500
200
100000
... More
Supply and laying of 50 Sq.mm. insulated copper cable in suitable PVC pipe. (Inspection by Consignee) All other materials required for installation to be arranged by contractor.
200
700
140000
... More
Supply and fixing of Teak Wood planks of of sizes as instructed by the site in-charge with 20 smooth finishing surface to be provided where ever required such as in location boxes relay room, equipment room and battery room, Fine wood polish of approved quality to be applied for two times after thorough application of emery paper. Fixing bolts and wood polish supplied by the contractor painting (Hardwood, paints, fixing bolts are to be arranged by contractor).
3
43600
130800
... More
Supply and fixing of cross on the signals (signal not in use) made of hard wood of size 1000mm X 100mm X 20mm (painted white as per Signal Engineering Manual) and suitable clamp made of MS flat.
25
328
8200
... More
Fixing relay bases, wiring in location boxes, bunching, fixing of relays as per circuit diagram. This includes fixing of condensers, resistance, 6 way / 1 way terminals/ WAGO, ND type fuses, LED indicators for fuses as per type fuses, LED indicators for fuses.
200
156
31200
... More
Releasing of location boxes Full/Half/sheet iron
40
148
5920
... More
Supply of double key lock.(Inspection by consignee)
3
303
909
... More
(SOR-607)Supply of Non-deteriorating type of fuse holders & fuse links - electric fuse for 43 Railway signalling Rate (in Rupees)d voltage 240 AC/DC to Specn. No. IRS S.78/92 (IRS-S-78/97 Tentative) IS:13703 (part 2/sec2):1993 suitable for E1 fuse 20Amps SC-20 Holder Safe Clip / knife edge type size E1 (R-SS) amp. (Inspection by RDSO)
-
-
241300
... More
Fencing for Location Box duly providing foundation ( A pit of size 400mmX 400mm X 1000mm 26 is to be dig and cement concrete foundation in the pit in the ratio 1:3:6 to be casted) and fixing the frames/doors and E type lock to the fencing with supplied material. THe rail post / angular is to erected up right in the foundation. All the materials are to be arranged and used by the contractor ( Rail post/ angular / frames / E type locks will be supplied by the Railways). Cutting of rail post / angular to the required lenght, transportation to the site by the contractor.(Per Unit=Set(4 Nos))
100
3856
385600
... More
Trenching under Rails for crossing the track(Track crossing) and refilling of trenches as per 8 RDSO drawing No.SDO/CABLE LAYING /009. The track crossing shall be done at right angles. The depth of cable trench shall be 1.2 Mtr. below the rail flange. The depth between top cable and the level of rail flange of the rail shall never be less than 1.0 Mtr.. The ballast shall be Stored separately while making the trench and the earth soil shall be stored separately. while re-filling the trench, the earth soil has to be filled first to the ground level and the ballast has to be properly put in the track. this work has to be done under supervision of S&T Representative and Representative of P.Way.(Per Unit=RMT)
1000
141
141000
... More
Fabrication and supply of MS frames to suit 'Q' series relays to accommodate 6 No. in each set as per Drg.No. B.SG.CN. MISC.9.98 duly drilling required holes for relay bases (All materials such as frames, bolts, nuts and washers to be supplied by the contractor) (Only Relay bases will be supplied by the Railways).
100
294
29400
... More
Supply of key chains with ring with plastic name plate of 60mmx20mmx3mm duly engraving station name on one side and key particulars on one side as specified by the site incharge.(Inspection by consignee)
50
23
1150
... More
Supply of Hand pump for taking HSD oil from 200 Lts Drum(Inspection by consignee)
1
455
455
... More
Supply of Surface base 140mm dia.post to suit item no. 1 & 2 as per drg.S.2011/M.(Inspection by RITES)
16
2370
37920
... More
Jungle cutting along with the cable route(Per Unit=RMT)
3000
4
12000
... More
Supply of Office table with plywood plank with thickness of 18mm, teakwood beading with three draws of size 4' X 2' with heavy duty 'S' type chair with hand rest. The above is of Godrej or similar make. (Inspection by consignee)
3
7035
21105
... More
Supply of 35 Sq.mm Multi-strand single core PVC insulated copper cable as per IS:694 for connecting Main earth electrode to MEEB in the equipment room in duplicate.(Inspection by RITES)
3000
303
909000
... More
Supply of Appropriate OFC patch cords (1.5 meters) for connecting FABIO or TANSY or similar with FDMS (Inspection by Consignee)
2
1770
3540
... More
Supply of Alarm hooter with strobe(Inspection by consignee)
3
2546
7638
... More
Earth Leakage detector 12 channels as per RDSO Specn. No. RDSO/SPN/256/2002 with 3 latest amendment including - 1) Mounting stand for ELD and 2 fuse board to isolate from distribution board, for the following requirement of channels:.24V/60V DC - 1 to 4 channels , 110V DC - 5 to 8 channels ,110V AC - 9 to 12 channels. (Inspection by RDSO)
3
133187
399561
... More
Supply and installation of UPS 1000va , 30 min backup, nemuric , as per instructions of engineer in charge . (Inspection by consignee)
3
9534
28602
... More
Supply of Relay Non-AC immune, plug-in-type Style 'QN1, DC neutral line, 24V, 8F.8B 34 contacts, front and back contacts metal to carbon with plug board retaining clip and connectors confirming to BRS 930, IRS-S34, IRS-S23 (as applicable). The interlocking code for this unit shall be ABCDF.(with ATC clips) (Inspection by RDSO)
100
2992
299200
... More
Fixing of PVC pipes & bends, drawing of required wires through the same up to functions like 40 control telephone, Dy.control telephone, magneto phones inside SM's office as per circuit diagram. This includes supply and fixing of required DPDT and rotary switches, PVC pipes and bends 25mm dia with 2mm wall thickness, Lightening dischargers and painting of particulars.
3
3628
10884
... More
Supply of Relay, Non-AC immune plug in type, style QN1, DC neutral line, 24V, 12F.4B 35 contacts, front and back contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS:930, IRS: S 34 & IRS:S 23 (as applicable). The interlocking code for this unit shall be ABCDE.(with ATC clips) (Inspection by RDSO)
50
2930
146500
... More
Implementation and testing per station of point reversal alarm.
1
5000
5000
... More
Supply of Relay, plug-in type, Style 'AC-LED' All aspects, AC lamp proving relay unit with in- 31 built current transformer type, slow release neutral line relay, 4F.4B contacts, front and back contacts metal to carbon, shall be suitable for working in series with the 110V AC, LED signal lamp Rate (in Rupees)d at 15W confirming to RDSO spec. STS/E/Relays/AC lit LED signal/09-2002, BRS 941A,IRS:s34 & IRS:S23 (as applicable). The interlocking code for this unit shall be ABDHK(with ATC clips).(Inspection by RDSO)
75
4831
362325
... More
Supply of Relay AC immune, plug-in-type Style 'QNA1, DC neutral line, 24V, 12F.4B contacts, 37 front and back contacts metal to carbon with plug board retaining clip and connectors confirming to BRS 931A, IRS-S60, IRS-S34 and IRS-S23 (as applicable). The interlocking code for this unit shall be ABDFH.(Inspection by RDSO)
200
3143
628600
... More
Fixing of junction type route indicator - 1 way to 6 way - complete / fixing of additional limb to 9 the existing route indicators, termination of tail cables, wiring as per approved circuits diagram, provision of required number of EWS locks, wire mesh and painting. (Supply of junction type Route Indicators - complete and additional limb is not covered in this schedule). [fixing bolts and nuts, EWS locks, wire mesh, PVC/Nylon sleeves, paints and all other miscellaneous materials shall be supplied by the contractor]
-
-
23025
... More
Supply of CLS post 140mm dia. 4.5M long to specification IRS.S.6.81.(Inspection by RITES)
8
3238
25904
... More
Erection of surface base, signal pole, mounting of Colour Light Signal upto 4 aspects complete on signal pole / offset bracket, (for LED / filament bulbs) with lenses, triple lamp holder, filament switching units, CLS transformers, current regulators (whichever is applicable), fixing of ladder with platform complete and concreting of ladder shoe, fixing of number plates, marker board, lenses guard, fixing of speed Limit board, whichever is necessary, termination tail cables, wiring of signal unit, provision of EWS locks, and 5 painting of one coat of redoxide and two coats of aluminium/enamel paints. When the aspect is fixed on offset bracket using 'U' bolts and nuts, a through bolt shall be provided by drilling of hole in the signal pole to prevent the offset bracket from sliding down.Item 5 Contd., (Supply of surface base, offset bracket, CLS pole, CLS aspect complete, ladder with shoes and platform, Speed limit board, LED aspects, current regulators, lamp holders, lamps, filament switching unit and CLS transformer is not covered in this schedule). ['U' bolts and nuts, through bolts and nuts, cement, stone jelly 20/25mm dia, river sand, Signal Colour Rings, all fixing bolts and nuts, lead wood, paints PVC/Nylon sleeves, enamelled number plates, enamelled marker boards, EWS locks, and all other miscellaneous materials for the work shall be supplied by the contractor).
16
5501
88019.2
... More
Automatic Change Over Control and Distributed panel for CLS to work on 10KVA AT, 240 V 18 AC, 50Hz, capacity 60A as per latest RDSO Specification No. TI/SPC/PSI/CLS/0020 with A & C Slip 1 to 4. ( Additional 1 more Rotary switch and Meter) CORE APPROVED drawing No.ASCOS/CORE/2005/01 Rev.02 Make:SUNTRON (Inspection by consignee)
2
56235
112470
... More
Supply of track feed regulating resistance disk type 0 to 30 Ohms as per Drg. No. SA. 20161/66/M or latest. To be procured from RDSO approved firms.(Inspection by RDSO)
75
243
18225
... More
Supply of Hydro meter.(Inspection by consignee)
6
191
1146
... More
Supply and fixing of Netlon wire mesh of all windows and ventilators as per instructions of Engineer-in-charge including labour charges.
400
291
116400
... More
Supply and installation of SC to SC or PC-SC or FC-SC 3 meter long patch cords as directed by site incharge. (Inspection by Consignee)
20
680
13600
... More
Excavation of pit, casting concrete foundation and erection of apparatus case half size as per Drg. No.SK/CN/1/89/B/1, fixing one 'E' type lock for the front door and latching arrangements for the back door 3 and fixing of one hard wood shelf plank 37mm thick and painting the apparatus case inside and outside with one coat of redoxide and two coats of aluminium paints (foundation bolts and nuts, E type locks, cement, river sand, stone jelly of size 20/20mm, hardwood plank of 37mm thick, paints, varnish, fixing bolts and nuts and all other miscellaneous material required for the work shall be supplied by the contractor).
25
6966
174165
... More
(SOR-1915-01)Cable laying at culverts/bridges -Low flood level-to take the cables under ground across the drain bed at a depth of 1.2 Mtr. for crossing small culverts with low flood level. After making the trench, the cable trench shall be further dug at an interval of 4 Mtr. to a depth of 0.5 Mtr. and at such intervals concrete supports of 300mm X 500mm to an height of 0.7 Mtr. shall be constructed using 1:3:6 concrete. the pipe 12 shall pass through this concrete at proper height so that the pipe with cables inside it rests in the cable trench at 1.2 Mtr. depth. The concrete supports so cast shall be cured for a period of 5 days before filling the trench. During the curing period of 5 days, the culvert portion of cable laying shall be protected by keeping a watchman day and night. (a) Trenching across the drain bed to a depth of 1.2 Mtr.,30cm width in all types of soil, laying of DWC/GI/RCC pipes ( to be supplied by Railways) and refilling with excavated soil, ramming and consolidation after 5 days .i.e on completion of the work of SOR No.1915-02(Per Unit=RMT)
500
74
37000
... More
Painting of S&T gadgets.
2500
78
195000
... More
Supply ,transportation and installation of Cable termination rack similar to Medha Servo 34 Drives or similar with all fixtures ,Supporting Angles,Triangle Bases,Insulators,Din Rails duly fixed on rack with powder coated and color of rack to be matched with the relay rack supplied by Medha Servo Drives and as directed by engineer incharge at site.
4
27280
109120
... More
Supply of smoke cum Heat Sensor(Inspection by consignee)
50
2194
109700
... More
Supply and fixing of Safety slogans in three languauge (Telugu, Hindi and English) with minimum of size of the Slogans 200mm X 1000mm or suitable to the slogans proportionate payment for each sheet.
15
650
9750
... More
Supply of Battery charger of 230Volts AC / 110V DC 30 Amps single phase, signalling / telecom. Instrument as per RDSO Specn. IRS S.86/2000 Amd.1 or latest.(Inspection by RDSO)
3
74911
224733
... More
Fixing of Solar panels on roof top etc, concreting the base and their wiring as per the details 51 given by Engineer at site and also extending the solar panel output to 6 way PB terminal/change over switch as per (C) below located inside the room/ gate lodge using 10 sq mm wire through PVC pipes. All materials excluding PVC wire coil shall be supplied by Contractor. includes installation of charge controller, AJB, foundation related items on roof top including cement and any other material supplied with system. (Per Unit=Per panel)
150
363
54450
... More
Supply of GKP type Location Boxes Full size as per drg. No. S&T/MFT/2378 (Single). (Inspection by RITES)
100
8960
896000
... More
Supply of Dot Matrix Printer EPSON LQ 300/LX300, 18 column, with serial port.(Inspection by consignee)
1
9000
9000
... More
Supply & Laying of G.I Pipes 50mm dia. medium quality to specification IS.1239 (part-I) 1990 14 and galvanised to specification IS.4736-1986 On bridges , culverts, trench with channel ramps on either end of the culvert/bridges. Clamping arrangement with MS brackets for fixing of GI pipes on bridges/culverts, small holes of 5mm are to be drilled on the pipe before laying of the pipes. (Inspection by Consignee)(Per Unit=RMT)
600
254
152400
... More
Supply of Junction type/Directional type route indicator 2 way to drawing no.SA.23402 with IRS - S 66/84 with amendment-1 or latest (Inspection by RITES)
8
19110
152880
... More
(SOR-115)Supply of Colour light signal unit:(Inspection by RITES)
-
-
162110
... More
Complete Indoor work of installation, wiring and commissioning - for PHASE WORKING.
1
38851
38851
... More
Supply of basic material to construct unit maintenance free earth consisting as per RDSO spec no.RDSO/SPN/197/2008 consisting of : a) copper bonded steel electrode of 3.0m long, 17.0 mm dia with 64 copper bonding thickness mini 250 micron and UL listed and marked--1 no. b)Earth enhancement compound of RDSO approved brand supplied in sealed bags of min 10 Kgs-03 No. c) Copper strip of 150X25x6mm to terminate earth rod-1 No. d) Copper strip of 300X25x6mm (MEEB)-1 No. e) Copper strip of 150X25x6mm to (SEEB)-1 No. (Inspection by RDSO)
150
16837
2525550
... More
Supply of following items for stations(Inspection by consignee)
-
-
126742
... More
Labour assistance for SE/JE in day to day works i.e checking the curves/straight alignment of formation, levels etc. Carrying the tools & equipment etc. during the course of execution of work as per the instructions of concerned SE/JE.
450
250
112500
... More
Training of Railway Personnel in installation, commissioning, testing, trouble shooting and in diagnosing faults using diagnostic tools/flow charts including supply of necessary documents(Per Unit = 60 Man days)
1
50000
50000
... More
Supply and providing of Polymeric Positive Temperature Co-Efficient Device self reseting type (PPTC) suitable for Railway Applications
100
59
5980
... More
Supply & Laying of G.I Pipes 100mm dia. medium quality to specification IS.1239 (part-I) 1990 15 and galvanised to specification IS.4736-1986 On bridges , culverts, trench with channel ramps on either end of the culvert/bridges. Clamping arrangement with MS brackets for fixing of GI pipes on bridges/culverts, small holes of 5mm are to be drilled on the pipe before laying of the pipes. (Inspection by Consignee)(Per Unit=RMT)
1200
341
409200
... More
Supply ,transportation and installation o f Cable ladder rack with all fixtures ,Triangle Bases,Insulators duly fixed on rack with powder coated and color of cable ladder to be matched with the relay rack supplied by Medha Servo Drives and as directed by engineer incharge at site.
8
8600
68800
... More
Track crossing by horizontal boring method based on the drawing no.DRM/J/6735 dated 7-8- 7 03 as advised by the engineer at site. This includes the supply and insertion(pushing) of GI pipe (80mm) confirming to IS.1239 heavy class in the bore drilled with the coupler between two pipes. All the joints of casing pipes should be tight and leak proof.(Per Unit=RMT)
1600
1403
2244800
... More
Transparent plastic cover superior quality for keeping circuit diagram sheets with provision for hanging size "C"(To be supplied before prior approval of engineer incharge).(Inspection by consignee)
2800
40
112000
... More
Supply of DWC pipe of 180 mm outer dia/ 153 mm inner dia in lengts of 6 Mtr with coupler. to IS specification No.14930 Part-II.The IS spec shall be marked on the pipe.(Inspection by consignee)
100
2640
264000
... More
Fabrication,supply and erection of conventional Earth to signalling equipments -Excavation of earth and providing earth pipe of size 50mm dia, 3.5mm thick 2.0 m. long G.I. pipe with masonry tub constructed 14 around at earth locations as specified by site Engineer. Alternate layers of 30kgs-chrcoal and 30kgs-common salt to be filled in the pit while closing. The pipe perforation etc., to be carried out as per drawing No. SK 10/10.. The earth pipe to be connected to the function with cable as supplied by Railways. The reading should be painted on the masonry tub. The masonry tub of 400X400X450mm should be covered with cement slab. ( All materials to be transported and supplied by the contractor except cable.)
20
5100
102000
... More
Supply of thick Kodak photo paper with lamination of various sizes with different lettering and 37 lauguages in required size as per the instructions of site incharge. Proportionate payment to the size of boards. (inspection by Consignee)
10
3850
38500
... More
Numbering location box as per standard practice and writing all termination particulars inside the location box as per details. This includes all main and tail cable particulars, writing of cable numbering of cables, polishing teak wood boards in two coats and painting hard wood shelves in two coats of black enamel.
100
280
28000
... More
Supply of B type chokes to specification no. IRS-S.65/83 to amendment no.1 or latest. (Inspection by RDSO)
150
1604
240600
... More
Supply of Microcontroller based fire Alarm monitoring & control unit(Inspection by consignee)
3
7346
22038
... More
Printing, Binding & supply of the following registers with latest proforma given by in-charge officer each registr of 100 pages. a) Station Asset Register b) Deficiencies c) Officer Inspection book d) Work site orientation classes note book. e) Station Message book f) Infringement measure book for signal gears g) Route 57 cancellation register. h) Relay room Key register i) Selection circuit testing j) Cable testing summary k)Signal maintenance record. l) Power Supply systems(Battery maintenance ) m) Block instrument Maintenance Register. n) Track circuit maintenance Register. o) Electrically operated point maintenance Register. p) Location box maintenance Register. q) Earth Testing record Register. r) Joint Inspection of Points and Crossings register. s) Diesel generator /Solar panel Register. t) Location box maintenace Register. u) Earth Testing record Register. v) Cabin/Relay room register. w) Joint Inspection of Points and Crossings register. x) Block Proving Axle Counter Register. y) Diesel generator /Solar panel Register. (Per Unit = per register)(Inspection by consignee)
75
70
5250
... More
Erection of Relay rack 1way / 2way / 4way with scaffolding suitably concreting tri-pod bases 41 using J-bolts, fixing rack supporting of size 50x50x6 mm on to the wall. Reel insulators are to be provided for insulating the rack from the scaffolding & tri-pod bases. ( payment based on number of equivalent 1 way relay racks).(Per Unit=Per one way rack)
6
341
2046
... More
Supply of PVC insulated wire copper conductor 16/02mm to ATC IS:694 to RDSO specification no.IRS.S76/89. Each coil of 100 mts length. To be procured from RDSO approved firms.(Per Unit=coil) (Inspection by RDSO)
500
797
398500
... More
Supply, installation and commissioning of hand held work station complete as per the spec. or 44 better with necessary cables, programmes, software for programming and trouble shooting and commissioning of EI. Intel core i5 processors with 2.6 GHZ speed, 1TB HDD SATA hard disc, windown8 OS, 15" HD LED display, 2GB dedicated graphics memory, web cam, wireless LAN IEEE 802.11 b/g/n, usb ports, 3 years branded antivirus license, make : DELL/SONY/HP.(Inspection by Consignee)
1
47990
47990
... More
Supply of High Availability Single Section Digital Axle Counter System complete with dual sensor as per RDSO specification No. RDSO/SPN/177/2012 version 3.0 or latest consisting of:- (i) Track side high 4 availability Digital Axle Counter unit - 2 Nos. (ii) High frequency Tx coil and Rx coil (each set consists of web mounting type 2 Nos. Tx Coil and 2 Nos Rx coil). (iii) Vital Relay Box - 2 Nos. duly wired with following relays: (a) Vital Relays QNA1K, 24V, 6F.6B - 2 Nos. (b) Reset Relay QNN1, 24V, 6F-6B - 1 No. (c) PR Relay QNN1, 24V, 6F-2B (Dual) - 1 No. (iv) Clamp with deflector plates and hardware - 4 Nos. (v) Reset Box - 2 Nos. (vi) Surge Voltage Protection Device Mounted on DIN Rail - 2 Nos. (Inspection by RDSO)
2
704160
1408320
... More
Provision of Security Guards round the clock beat from Up Home Signal to Down Home Signal to avoid theft of signalling amenities in 12 hour shift.(Per Unit= Per 12 hrs)
960
434
416640
... More
Supply of solar panel system each set consisting of (all items should be supplied from the same manufacturer) a) Solar modules - 12V 80Wp as per RDSO specification IRS S84/92 amend 2 or latest - 50 No. b). Solar charge controller - 110V, 40 amp- 1 no to RDSO/SPN/187/2004 or latest suitable for LMLA batteries 62 wall mountable. Should be supplied with spares as mentioned in the IRS specification 187/2004 or latest. (Inspection by Consignee) c). 10 module mounting structures - 5 nos as per drawing. Structures to be powder coated with facility to change the angle of inclination. d). Array junction box ( 5..1) - 1 no e). Copper cable- 2cX2.5sq.mm-150mtr,2cX10sq.mm-60mtr,1cX25sq.mm-20 Mtr.. f) Super earthing kit - 06 nos g) Installation kit - 1 no. Note: All nuts and bolts to be galvanised. Should be supplied with required manuals. (Inspection by RDSO)
3
1091792
3275376
... More
Supply of steel stools 18" height neatly finished and painted.(Inspection by consignee)
6
334
2004
... More
Modification of Data Logger embedded Software when a Station Master fails to set the point 36 against occupied within stipulated time after arrival of the train for the specified station (this includes LED indication system with 6 indications, buzzer and acknowledgement button with interface face facility to existing Data Lagger.
1
35000
35000
... More
Supply and installation of rack mounted 24F FMS fiber of Bestnet Make or similar to suit connectivity for switches and FMS. (Inspection by Consignee ).
3
15600
46800
... More
Releasing of complete equipments and materials in battery, equipment rooms, relay rooms and SM's office.
1
2577
2577
... More
Supply of CLS ladder set complete with staging, supports, signal number plate, cast iron ladder base to suit 3.5 Metre post as per drg.no.SA.23150.S.2033.(Inspection by RITES)
8
3574
28592
... More
Manufacturing, Supply, painting and fixing of markers of G/P/C/A/IB Markers/Number plates with engineering grade reflective sticker on MS sheet with clamps as per drawings/as per site incharge. including all fixing materials.
65
308
20020
... More
Supply, fabrication, installation and fixing of panel operator consol with arrangement to fix 55" 43 VDU's - 2Nos. Reset boxes, and other S&T gadgets. This shall be made of not less than 18mm thick playwood/novopan or better materials with storage facility of approved colors with contractors' materials, lead, lift and manpower as per the instructions of engineer in charge and as per the enclosed drawing. (Inspection by Consignee)
1
244641
244641
... More
Releasing of block instrument
2
307
614
... More
Supply and fixing of H. Wood planks of 40mm thick and not less than 200 mm width with smooth surface, painting (Hardwood, paints, fixing bolts are to be arranged by contractor). Per
2
18673
37346
... More
Supply, painting and fixing of cable Gland Plate for full GKP box as per site requirement.
200
533
106600
... More
Supply of Electric Key Transmitters single complete to drg.no.SA.22601/Alt-4& IRS S.21/2001 to ward no. specified.(Inspection by RDSO)
20
4767
95340
... More
Supply and fixing of 20 mm thick teak wood planks for keeping equipments in full box after applying two coats of wood primer. The approximate size of pank is 940mmx20mmx300mm(Per Unit=per plank)
25
490
12250
... More
Supply of E 1 convertor (Ethernet Port to G-703) as per specification four Ethernet to one E 1 converter dual AC / DC power supply. (Inspection by consignee)
2
31500
63000
... More
Supply of point contactor relay QBCA-1 AC immunized miniature plug in type DC biased 33 contractor, attractive armature 24Voits DC with 2HF/4B contacts, Heavy duty front contact, contacts metal to carbon complete with plug board, retaining clips and connectors to specification. BRS 943,IRS.S@46"44@IRS.S.23 as applicable(Inspection by RDSO)
30
6859
205770
... More
Supply of terminal block 6 way PBT 25mm as per RDSO Drg.No. SA.23756/Alt.3 & IRS S.75/91 & IRS.S.23 with amendment no.2 or latest. (Inspection by RDSO)
3000
285
855000
... More
Supply of Rubber Mat of size 2000mm X 500 mm and 12 mm thickness(Inspection by consignee)
12
819
9828
... More
Supply of any SOR Items from Chapter -19 to Chapter- 27
1
300000
300000
... More
Installing of Earth Leakage detector 12 channels.
3
8000
24000
... More
Commissioning of Electronic Interlocking system
1
16318
16318
... More
Releasing of shunt signals ground type complete.
4
141
564
... More
Supply of fan less embedded industrial grade computers ( Similar to Moxa V2406 or better ) with all accessories such as key board, mouse,antivirus etc. of industrial grade as per approved Specification as recommended by RDSO (TAN No. STS/TAN/3007 Version 1.0 or latest) (Inspection by Consignee)
2
257250
514500
... More
Electrical point equipment complete.
10
213
2130
... More
Supply of Ground Connections for the universal type point machines as per drg.no. RDSO.S.3362.or latest.(Inspection by RITES)
25
5767
144175
... More
Breaking of RCC concrete in Relay Room/ Panel Room for drawing cables to ground floor and 1 st floor
3
3700
11100
... More
Supply and Installation of Fault analysis terminal for analysis of fault and generating reports for Datalogger installed at stations with minimum 19 inch display terminal with i5 processor 4GB RAM, HDD 1 TB, Windows 10 Licenced .(Inspection by Consignee)
1
47080
47080
... More
Supply of position light shunt signal post type with hoods, number plates,lamp holders, wire mesh, terminal block and offset bracket to suit 90 mm sockets (CLS) with 2 nos. of U bolts and nuts complete to fix calling on signal/shunt signal below main stop signal as per to Drg no. S23840.(Inspection by RITES)
10
2416
24160
... More
Excavation of trench to a depth of 1200mm and width of 300m at bottom in all types of 2 soil(Normal soil/soft soil/sandy soil except in hard morum / rocky soils /bridges/ level crossings/ track crossings/ coil pits, ) as per RDSO Sketch no SDO/CABLE LAYING /003 including marking of cable alignment, clearing of jungle, bushes, trial pits if required, refilling with excavated soil, ramming and consolidation after laying of cables complete to the finished item of work as directed by supervisor in-charge.(Per Unit =RKM)
10
51912
519120
... More
Supply of Fail safe Electronic flasher 24V DC input, 3 amps, as per RDSO Specn. No. RDSO/SPN/173/2002 or latest.(Inspection by RDSO)
6
2984
17904
... More
Transporting and supply and installation of Concrete (RCC) route indicators at intervals of 50 27 meters as per technical specification. They should be of standard RCC with letters one side "SCR" and the other side "S&T" cable" as per drawing SK12/10 of RVNL/SC . In case of telecom quad cable joint locations it shall be painted with red colour. 4 Nos. of MS bars 8mm dia including curvature and 6mm dia Stirrups. (6 Nos.) to be provided by the contractor. (Inspection by consignee)
600
807
484200
... More
Manufacturing and fixing of glass fronted box ( key box) made out of teak wood of size 10 inches x 16 inches.
10
255
2550
... More
Supply of aluminum lugs 25 Sqmm of reputed make(Inspection by consignee)
1000
17
17000
... More
Supply of distilled water for topping of secondary cells.( to be supplied at site.) IS 1106(Inspection by consignee)
1000
7
7000
... More
Fixing of point machines on PSC/Wooden sleepers as per standard drawing. Wiring as per circuitry includes fixing & wiring of point contactor unit frames and controlling relays . Includes fixing of crank handle ward plate.
30
4308
129240
... More
Fixing of Offset brackets using 'U' bolts and nuts, erecting of Calling On Signals/'A' marker lights, termination of tail cables and wiring, provision of EWS lock, number plates/ markers boards and painting. 10 The work also includes drilling suitable holes on the CLS post and provision of a through bolt with nut to prevent the Off-set bracket from slipping down. (Supply of Calling On Signal / 'A' marker light, LED aspect / holders and bulbs and off set brackets is not covered in this schedule). ['U' bolts and nuts, through bolts with nut, EWS lock, Enamelled number plates, wire mesh, PVC/Nylon sleeves, paints and all other miscellaneous materials shall be supplied by the contractor.
12
1427
17127
... More
Supply of Relay AC immune, plug-in-type Style 'QNA1, DC neutral line, 24V, 8F.8B contacts, 36 front and back contacts metal to carbon with plug board retaining clip and connectors confirming to BRS 931A, IRS-S60, IRS-S34 and IRS-S23 (as applicable). The interlocking code for this unit shall be ABDGH.(with ATC clips)(Inspection by RDSO)
200
3173
634600
... More
Releasing of Warning Boards/stop boards
6
252
1512
... More
(SOR-2701-02)Transportation of materials from any Stores to Site and vice-versa including loading and unloading. (A) Lead above 50 Kms (Per Unit=PTPK)
450000
4
2160000
... More
Supply of tool kit as under: (1)Standard Tool Bag (CANAVAS) - 1 No. (2) Soldering Iron (Make "Soldron / Philips) - 75W/230V (to be kept at equipment room) - 1 No (3)Multi meter (Digital PHILIPS/FLUKE/18S Rish B) Upto 20M.ohms 10A, 5KHZ, 2mV to 750V AC, 200V DC -1 No.TRUE RMS METER (4) Screw Driver set of 6 pieces (Taparia Make) - 1 No (5) Cutting plier 6" (Taparia ) - 1 No. (6) Side Cutter (wire cutter) 6" (Taparia ) - 1 No. (7) Nose plier 6" (Taparia) - 1 No. (8) Wire stripper (Taparia ) - 1 No. (9) Fiber tape 3 meters - 1 No (10) Scale 6" (for tongue rail opening) -1 No (S.S.material) (11) Spanner wrench 6mm to 22mm (auto adjustable spanner) Taparia make -1 No (12) Spanner wrench 10 mm to 30 mm (auto adjustable spanner) Taparia make -1 58 No (13) Spanner wrench 15mm to 41mm (auto adjustable spanner) Taparia make -1 No (14) Hacksaw frame with blade 6", 4" width (for cutting cable) - 1 No. (15) Hammer 3.0 lbs 1 No. (16) Chisel 6" (for cutting bond wire) - 1 No. (17) Poker 8" (for removing bond wire, bond pin )- 1 No. (18) Screw Driver Heavy duty 12" with plastic handle (for opening of detector contacts (Taparia ) - 1No. (19) Test piece (Pt wedge piece) - 2 No. (20) Torch light ( preferable LED rechargeable type) - 1 No. (21) Universal key - 1 No. (22) Box spanner for 6 way terminals (13mm) (for opening ARA terminals) - 1 No. (23) Nylon brush (for cleaning purpose) - 1 No. (24) sealing Plier - 1 No. (25) Crimping Tool (1.5 to 16 Sq.mm) - 1 No. (26) Feeler gauge - 1 Set (27) TSR Meter (for testing condition of track circuit) - 1 No. (28) Wooden Block (60mm x 60mm) (for providing between Tongue rail & Stock rail during maintenance) - 1 No. (29) Track shorting clips - 1 No. (30) Tester - 1 No. (31) Flat file 12" length x 1" width - 1 No. (Inspection by consignee)
1
31434
31434
... More
Fabrication,Transportation and fixing of aluminium ladder at site made of Aluminium angle of 17 size 38mmx5mm width 280mm ,Flat size with powder coated colour as desired by engineer incharge at site and fixing of 25mmx5mm, Drilling of suitable holes for fixing of Hylam sheet 3mm thickness on ladder and 2 Nos of PVC trough 100 mm with cover fixed on hylam sheet along the ladder with all fixtures necessary ancillary materials required for fixing to be supplied and as directed by engineer incharge at site.(Per Unit=RMT)
200
2865
573000
... More
Printer for Maintenance terminal at Station. HP 1020 Laserjet or similar (Inspection by Consignee)
3
10797
32391
... More
Station working order diagram on non-transparent acrylic sheet of thickness 4mm with aluminium beading and hanging support with screen printing, lettering and yard diagram.(Per Unit =per yard per station)
1
6500
6500
... More
Fixing of offset bracket using 'U' bolts and nuts erection of posts type shunt signal termination 8 of tail cables, pvovision of EWS lock and painting of one coat of redoxide and two coats of aluminium / enameled paint. The work also includes drilling suitable holes ont he CLS post and provision of a through bolt with nut to prevent the offset bracket from slipping down.
20
1613
32265
... More
Supply and application of CYPRUS silane Althatic, Urethane Resin Blend Solvent Based high 22 technology Membrane radiant heat reflecting insulating Thermal berriar coating industrial grey colour with a genuine products sticker when remove display void on each container 20 Ltrs (appx) apply for two coats as per RDSO guide lines.
100
3860
386000
... More
Supply of copper lugs10 Sqmm of reputed make(Inspection by consignee)
500
8
4000
... More
Design, Installation, Wiring, testing, Soldering of all EI equipments, earthing of EI Equipment, Relay Racks and Power Equipment etc. including supply power cable and Documents/Manuals etc.(Per Unit=EI)
1
420098
420098
... More
(SOR-407-02)Supply of low maintenace secondary lead acid cells as per RDSO specification IRS-S-88/2004 with topping up to frequency up to 6 month. This includes supply of inter cell connector, bolts nuts, acid level indicating floats and vent plugs-2 Volts 80 AH (Inspection by RDSO)
225
2190
492750
... More
Supply of position light shunt signal ground type complete with base , Pipe, hoods, wire mesh, Number plate lamp holders, terminal block to Drg.No.SA.23840/Adv./Alt.1 - S.23202 (Adv.) Specn. IRS: S.6/81. (Inspection by RITES)
4
4160
16640
... More
Manufacture, supply and fixing of Sighting Board (size 535mm X 1800mm) with higher 36 intensity grade, retro-reflective sheet on 2mm Alu-minium alloy , sheet 14 gauge (0.6 Sq.mm / LC ) as per Drg no.SK/13/89 with MS angle of 75X75X6 mm with 6 meter length including paint, excavation of pit and concrete foundation etc..as per the instructions of sight in charge. All necessary materials to be arranged by the contractor).
2
7707
15414
... More
(SOR-2804-03)1st service of the DG set as per the manufacture's instructions(Per Unit=Per Service)
2
1654
3308
... More
Supply and installation of FRANKLIN ROD as per NFPA-780 STANDARDS each set consists 46 of 1) Fixing of Air terminal solid diameter 9.5 mm (2) Fixing of GI Mast-12 Mtrs ( 50mm GI pipe 4mm wall thickness with flanges welded with Base plates of 16mm thickness and stay supports with necessary wire rope as required at site. (3) Erection of Mast (4) All other materials for erection of mast & Air terminal. (5) Required cement, sand,stone(1:3:6) (6) All other materials for erection of mast & Air terminal. (Inspection by Consignee)
3
48500
145500
... More
Supply of Jerry can 20 Ltrs capacity white as per the requirement of SI at site.(Inspection by consignee)
10
105
1050
... More
Supply of hylam sheet, resin bonded, 6mm thick ,grade P3, to IS specification IS: 2036 of 1974 or latest and size 2400mm X 600mm of colour approved by the site in-charge. (Inspection by consignee)
3
2356
7068
... More
(SOR-1917)Supply and laying of split DWC pipe.
-
-
2747000
... More
Supply of 16 Sq mm Multi-stand single core PVC Insulated copper cable as per IS:694 for connecting MEEB to SEEB and SPDs and SPDs to MEEB.(Inspection by RITES)
300
144
43200
... More
EMI/ Earthing arrangements for EI including end Goompties for object controllers as per 45 RDSO specification as required for the EI system as per Rly. Br. letter No.2010/Sig/SGF/EI (Ansaldo) dated 22.06.2011 shall be followed. All materials shall be supplied by the contractor. Maintnance free earthing material shall be inspected by RITES. Balance material shall be inspected by consignee(Per Unit =Per station per location)
3
200000
600000
... More
Supply of offset bracket to suit 140 mm dia CLS post with two nos.of U bolts and nuts complete as per Drg no. S. 23080.(Inspection by RITES)
24
3377
81048
... More
Installation of Smoke cum Heat detector.
50
350
17500
... More
Releasing of mechanical point equipment complete/HP layout/Point & trap indicator/Electrical point machines.
2
224
448
... More
Supply of Universal locks with one key for every ten locks.(Inspection by Consignee)
200
60
12000
... More
Execution (Supply , transportation,installation and commissioning) of pin brazing /exothermic 34 out weld connection for TLJB/boot leg as per RDSO Spec. No.IRS S-103/2004 or latest. This includes good quality insulated cable for TLJB for the above purpose. one end on rails web in track circuit area and terminating the other end of wire on the terminals in the TLJBs, (all the equipments and materials required for welding will be arranged by the contractor.(Inspection by consignee)(Per Unit=per bond)
600
365
219000
... More
(SOR-2802)Initial Charging of Secondary Cells:-
-
-
49930
... More
Execution (Supply , transportation, installation and commissioning) of pin brazing /exothermic 33 out weld connection for continuity bond across fish plates in DC track circuit area as per RDSO Spec. No.IRS S- 103/2004 or latest. (all equipments & material required for brazing /welding of railhead continuity will be arranged by the contractor (Inspection by consignee)(Per Unit=Per bond)
900
725
652500
... More
Supply of 50 X 6mm GI tape for interconnecting earth electrodes. (Inspection by consignee)
500
369
184500
... More
Supply and laying of DWC pipe made of polythene 103.5 mm inner dia and 120 mm outer dia in 6 mtrs length as per IS 14930 Part-II along with 1 coupler per pipe asper specification IP 67 grade for every 6 mtrs. (Inspection by consignee)-Proof of purchase to be submitted along with supply of the item
2000
196
392000
... More
Excavation of square coil pit up to a depth of 1 Mtr. X 1.5 Mtr. For providing coil at location box, point, signals etc., This includes back filling and ramming of trench / pit after laying the cable and consolidation of soil.
150
181
27150
... More
Execution (Supply , transportation, installation and commissioning) of pin brazing /exothermic 12 out weld connection as per IEEE 837 for earth connection 38mm x 6mm GI flat with either location box or conventional earth or MFE electrode (all equipment's & material required for brazing /welding of railhead continuity will be arranged by the contractor.(Per Unit=Per bond)
500
1050
525000
... More
Strengthening of foundations of signals, Full/Half location boxes, by carrying out the earth work around the foundation, ramming of the earth, caring out masonry work from bottom of earth work using country stones and cement masonry to prevent the earth from slipping down the bank.
100
2813
281300
... More
Laying different type cables in the trench. Termination covered elsewhere. (Per Unit=RMT)
185000
5
925000
... More
Releasing of block counter
2
306
612
... More
Design and development of indoor drawings for PHASE Working.
1
64752
64752
... More
Supply of hylam , resin bonded, 3 mm thick, grade P3, to IS Specification IS: 2036 of 1974 or latest and size 2400mmX600mm of colour approved by site in-charge.(Inspection by consignee)
3
1289
3867
... More
1.Installation of single earth(maintenance free) including the following:- welding and fixing of copper tape (used as bus bar) welding of cadmium bronze cable to copper plate using material supplied vide item no. 1,2 of SPD of Sch-A . All the material supplied for mounting of copper tape, exothermic weld materials, tools and fixtures for welding copper tapes shall be arranged by contractor. a. Digging /Auguring/Boring of single earth pit of 100mm to 125 mm dia to the depth of approx. 2.8 meter. b. Insertion of 3.0 meter electrode and penetrating it at least .2 meter by pushing gently with sledge hammer where the natural soil is assumed. c. Filling of earth pit with earth enhancement compound (EEC) in slurry from and backfilling. d. Carrying out exothermic weld 26 connection on single earth electrode to a copper tape of 150X25X6mm. e. Carrying out exothermic weld connection on the copper tape of 150X25X6mm on earth electrode for connecting two 35 Sq mm cables for redundancy. f. The exothermic welding material for bonding the earth system shall be procured from RDSO approved firms, which includes graphite moulds, clamps, weld metal powders. g. Digging a trench to a depth of at least 0 .5 Mtr. and run the two 35 Sq mm earth conductor ( procured against supply item) from earth pit to MEEB. h. Routing and termination of two 35 sq mm earth conductors in trench from earth pit to 300X25X6mm MEEB, which is to be fixed inside the equipment room with two insulation studs. i. 300X300X300 mm (inside dimension) concrete earth pit with a concrete lid, approx 50mm thick with pulling hooks, shall be provided to cover the pit. Back side of the cover will be painted in black and dare of the testing and average resistance value shall be written.
150
4276
641400
... More
Installation of MAPLE 4C and fibre multiplexer system at station
2
12921
25842
... More
Supply of insulations for 'D' clamp switch extension bracket to suit to universal point machine as per drawing supplied by the Railways. (One set consists of 'D' clamp insulation - 2 No. Nylon insulation bushes 4 No., Nylon insulation washers - 8 No.). (To be procured from RDSO approved firm).(Inspection by Consignee)
25
496
12400
... More
Installation, testing and commissioning charges of BPAC with dual sensor.
2
56180
112360
... More
Supply of rodometer(Inspection by consignee)
1
2940
2940
... More
Supply of commercial grade operator VDU of size 55" Full HD , Model no.55SM5KD LG make or Similar. (Inspection by Consignee)
2
226320
452640
... More
Supply of OFC integrated access device 1U height or 1.5U height/ 19" rack mountable for LVCD/Digital axle Counter purpose: Optical module integrated in the unit supporting dual core OFC and one 100Mbps Ethernet port for survillance / smoke detector; optical distance support to be 20Kms; unit to support one 8 E&M module supporting four 2W/4W (each pport configurable ) to support Axle Counter/ UFSBI / Control Phone / EC / RTU; and one TELNET/SNMP port; unit to support DC/AC power supply; unit to support change over mechanism between quad and optical fiber for E&M interface option ; one number cable to be provided along with unit for E&M ; FABIO /2CX/ OFC /DC & mOFULE 2W/4W four port: Make : TEAM ENGG / FABIO / WAVES or similar / TANSY (Inspection by RITES).
2
165200
330400
... More
Supply of Automatic Changeover CLS Panel outdoor type, 150A suitable for 3 supply, 20 230Volts, single phase, 50Hz AC power supply confirming to RDSO's Specn No.TI/SPC/PSI/CLS/0020. (suitable for 25KVA AT) or latest. Latest RDSO Specification no.TI/SPC/PSI/CLS/0020 with A & C slip 1 to 4. ASCOS/25KVA/CORE/2007/01Rev.01 Inspection by Consignee
1
154875
154875
... More
Supply of drive lug insulation for universal point machine to be procured from RDSO approved firms. (One set consists of one number central insulation plate, bushes - 2 No. and washers - 4 No.).(Inspection by consignee)
25
109
2725
... More
Supply, installation and commissining of universal fail safe block interface for single line. Each consisting of the following: Inspection by RDSO (1) Universal fail safe block interface for single line complete with 30 all accessories as per RDSO Specn. No. RDSO/SPN/188/2004 Ver.1.0 / latest Amdt. -- 2 Nos. (2) Relay rack with due locking and sealing arrangements including relays (QN1 - 22 Nos., QNA1 - 6 Nos.; QL1 - 02 Nos.; Timer - 01 No. and wiring as wiring diagram RDSO Drg. No. RDSO/S/32020 (Latest Amdt.) -- 2 Nos. (3) Block panel complete with accessories as RDSO Drg. No. RDSO/S/32019 or latest Amdt. -- 2 Nos. (4) Block Telephone with accessories as per RDSO Specn. No. RDSO/SPN/191/2006 -- 2 Nos. Per Block
1
846000
846000
... More
Installation, testing and commissioning of Data Logger which includes the software 53 configuration needed, validation, taking test print, for networking for transferring the data to nominated location for monitoring and changing of EPROMS if any as per the instructions of the site in-charge, including alterations data base in Hq/SSE offices where ever required.
3
24280
72840
... More
Supply of Relay AC immunized, plug in type, style QNA1K, DC neutral line, 24V 1000 ohms, 38 6F.6B contacts, front contacts metal to carbon and back contacts metal to metal / carbon, complete with plug board, retaining clip and connectors conforming to BRS 931A, IRS S@45<44@ IRS S@45"44@ IRS S23 and RDSO specification STS/E/Relays/UEA (PI), dated 30-6-97 (Annexure - II) (as applicable). The interlocking code for this unit shall be CDEKY.(with ATC clips)(Inspection by RDSO)
50
3178
158900
... More
Supply of Junction type/Directional type route indicator 1 way to drawing no.SA.23402 with IRS - S 66/84 with amendment-1 or latest(Inspection by RITES)
5
10591
52955
... More
Supply of Data Logger with 512 Digital inputs and 32 Analog inputs for remote monitoring with 70 net work facility of signalling parameters and power supply arrangements to confirming to Specn. No. IRS. S.99/2006 with 64 input digital cord as a spare and fuse monitoring PCBs for monitoring at least 50 No. of 2 Amps Fuses, with inbuilt modem cards for networking(Inspection by RDSO)
3
383224
1149672
... More
Installation of Microcontroller based Fire Alarm monitoring & control unit & Alarm Hooter.
3
750
2250
... More
Supply of tool kit for Axle counter counter equipment supplied as per manufacturer's specification(Inspection by consignee)
1
93080
93080
... More
Excavation of trench to a depth of 1200mm and width of 300m at bottom in hard morum soil as 3 per RDSO Sketch no SDO/CABLE LAYING /003 including marking of cable alignment, clearing of jungle, bushes, trial pits if required, refilling with excavated soil, ramming and consolidation after laying of cables complete to the finished item of work as directed by supervisor in-charge.(Per Unit=RKM)
8
67092
536736
... More
Supply of Kirloskar make or similar 20 KVA air cooled single phase silent DG set coupled with 19 engine model no.HA394,32 BHP diesel engine complete with standard control panel fuel tank, battery, battery leads, acoustic enclosure, complete dg set as per CPCB norms along with battery for self start of standard/AMCO/Exide or similar make. (Inspection by RITES)
2
453600
907200
... More
Wago Connector UFTB set (Un-fused terminal block) Inspection by Consignee(Per Unit=Per location)
8
1800
14400
... More
Supply of WAGO Terminal as per RDSO Specification No. 189/2004 which consists as per 42 following: a) 2 Conductor disconnect type terminal block as per Model No. 280-870 -- Qty: 6 No. b) End plate type 280-374 suitable for disconnect terminal of Model No.280-870 -- Qty: 1 No. c) End stop terminal block type 249- 117 -- Qty: 2 No. d) Shorting links (16A) as per model 280-402.(Inspection by RDSO)
750
486
364500
... More
Installation and wiring of token/token-less block Instrument in ASM's room with suitable foundation including fixing of LD's, terminals, fuses &earth connections. All ancillary works included. (Per Unit=Per Instrument)
1
2789
2789
... More
Supply of Track feed battery charger to work on 110V AC for charging 1 or 2 or 3 or 4 lead acid cell of 80AH (10 Amps) used in track circuit as per RDSO Specn. No. IRS.S.89/2013 Ver. 1.0 latest. (Inspection by RDSO)
75
5775
433125
... More
Supply of 19" - 42U Rack complete with fittings for housing SDH equipment , FDMS, DDF and 38 other equipment like cable managers completely wired as per the technical specification mentioned below. It should be able to lock all the equipment with only order wire Telephone outside the rack. the rack should be of APW President/ Rittal make etc., The components of the rack are specified below. It includes transportration and installation of rack in prefab / building at specified stations. (Inspection by Consignee)
1
41600
41600
... More
Incremental rate for signaling functions in EI SYSTEM over and above 125 functions under item No 1 (Inspection by RDSO)(Per Unit=Per function)
228
51590
11762545.08
... More
Breaking of metal/ tar road and refilling after laying the cables as per drawing no.SDO/CABLE LAYING/010. The surface of the road shall be concreted to match with the old surface.(Per Unit=RMT)
200
142
28400
... More
(SOR-2205-04)Supply and fixing of wire mesh for the following signals, duly painted with black enamel in two coats. (A) Box type mesh for ground type shunt signal
6
484
2904
... More
Supply of AC immune, plug-in-type, Style 'QTA2' DC Neutral track, 9 ohm, 2F.1B contacts, 30 front and back contacts metal to carbon, complete with plug-board, retaining clip and connectors conforming to BRS: 939A, BRS: 966 (Appendix F2), IRS:S 34 & IRS:S 23 (as applicable). The interlocking code for this unit shall be FGHKX.(with ATC clips)(Inspection by RDSO)
75
3271
245325
... More
Supply of Wire rope 6/19 steel 6mm dia with fiber core as per specn IS 3459/2004 or latest with PVC sheathing of 2 mm thick type 6 compound IS 5831/1979 or latest(outer dia 10mm.)(Inspection by consignee)
200
76
15200
... More
Provision of one skilled and 2 unskilled staff round the clock to attend to teething trouble of the installation along with SI/CSI after the installation has been brought into commissioning. The work includes routine maintenance, failure restoration as per the direction of the SI/CSI.
6
43437
260622
... More
Supply of Navtal Locks godrej make 50mm.(Inspection by consignee)
20
384
7680
... More
Supply of GKP type Location Boxes Half size drg. No. S&T/MFT/2378 (Half).(Inspection by RITES)
25
5529
138225
... More
Design and preparation of computer aided (Auto CAD) diagrams. Note: Details Design and drawing of above drawings and submission of two draft copies for approval. One copy is returned either duly 32 approved for making a fiar copy or for resubmission for approval after incorporating the changes as required by railways. After preliminary approval required number of prints are submitted for Administarative approval. After the Administarative approval negatives of the above drawings , a soft copy on a CD along with required number of final prints are submitted. After completion of work 6 sets of asmade documents are to be submitted in bound booklets.
-
-
116500
... More
Supply of relay fixing frame for Full location box, the frame should be made out MS angle of 25mm X 25mm X 3mm and approximate size of 940mm X 150mm with suitable holes to fix the same in the box. (Inspection by Consignee)
50
591
29550
... More
(SOR-2804-01)(A) Foundation, Erecting & Wiring, changeover arrangements in Generator room, commissioning as per Technical Specification, for Installation of two generators of capacity upto 10/15/20 KVA.
1
30531
30531
... More
Supply of indoor cable 60 core X 0.6mm as per IRS S.76/89 amend no.2 or latest. (Inspection by RDSO)
1
128938
128938
... More
Wago Connector FTB set (Fused terminal block) Inspection by Consignee (Per Unit=Per location)
8
2000
16000
... More
Final location survey of cable route and final preparation of cable route plan as per technical specification.(Per Unit =RKM)
18
994
17892
... More
Supply of Junction type/Directional type route indicator 3 way with mounting socket to drawing no.SA.23401 with IRS - S 66/84 with amendment-1 or latest(Inspection by RITES)
7
17732
124124
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Nanded, Maharashtra