Rural Development Department Tender

Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. - - 224 / Plastering and Pointing / 32.08 / BDL 4 B

Royalty

Structural steel Angle

Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.). - - 291 / 38.04 / BDR 5

C ) HR

Providing and laying Cast in situ / Ready Mix cement concrete M - 20 of trap / granite / quartzite / gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,( Excluding reinforcement and structural steel ).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant ( Pan mixer ) etc. complete. With natural sand / V.S.I. quality Artificial Sand - - 190 / Reinforced Cement Concrete / 25.70 / BDF 8

Providing and laying in situ / ready mix M - 20 CC of trap / granite / quartzite / gneiss metal for wearing course 8 cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with Natural / VSI standard Artificial Sand) - - 107 / Bridge Super Structure / 14.39 / BR

Providing & Fixing 32 mm thick One piece single moulded puff ABSTRONE BUTADYNE STYRINE (ABS) Door shutter for internal use including toilets made up of outer ABS sheet of 1.2 mm thick having puff insulation of 35 to 40 Kg / Cum.density and 10 mm dia.for steel bars 2 Nos., wooden block to receive fixtures, having M. S. hinges 100 mm length, M. S. handles 150 mm length and 10 mm dia sliding door bolt etc. complete - - 278 / Doors and Windows / 39.80 / BDT

Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% eflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade. Spec :MORTH-801 IRC-67-1977 and as directed by Engineer in charge. DSR I NO 25 /28 P.NO 238

Providing and fixing mild steel grill gate with angle iron frame 65 mm x 65 mm x 10 mm with iron bars at 150mm.C/C and diagonal flats as per the detailed drawing including hinges, pivot blocks locking arrangement, welding riveting and oil painting of three coats of approved shade. Weight of gate 35 Kg/smt. - - 313 / Building Miscellaneous items / 44.10 / BDW 6

Providing and laying concrete pipes of I.S.NP. class of 225 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. - - 293 / Water Supply and Sanitary Fitting / 42.08 / BDV 11

Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. - - 224 / Plastering and Pointing / 32.05 / BDL 2 B

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. - - 199 / Reinforced Cement Concrete / 26.33 / BDF 17

Providing and fixing aluminium grill diamond mesh type DG202 of 7.5 mm thick including fixing in position anodised aluminium frame section of 80 x 38 mm x 1.22 mm size box, cutting to the required size with all wastage , labour, lead lift etc. complete.

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.- - 214 / 23.02 / BDC 2

Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg / sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 milli meter thick including striking joints and cleaning etc. complete. ( using 100% crushed sand ) - - 235 / Paving Flooring and dado / 33.53 / BDM 12

Providing and laying for 150 mm dia salt glazed stoneware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. - - 293 / Water Supply and Sanitary Fitting / 42.04 / BDV 39

Testing of C.C.Cube :- M20 :- Compressive Strength [ Set of 3 Cubes ]

Providing and laying Cast in situ/Ready Mix cement concrete in M - 10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, formwork, laying /pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant ( Pan mixer ) etc. complete. With natural sand / V.S.I. quality Artificial Sand - - 177 / Plain Cement Concrete / 24.01 / BDE 1

Providing and constructing Brick Masonry Inspection Chamber 60 cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. - - 294 / Water Supply and Sanitary Fitting / 42.12 / BDV 43

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) - - 150 / Excavation / 21.02 / BDA 1 A ) Soil

Testing charges for Bricks :- Water Absorbtion, Compressive Strength,Water Absorption, Efflorescence ] [ Set of 5 Bricks each. ]

Providing dry / trap / granite / quartzite / gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. - - 154 / Excavation / 21.38 / BDA 12

Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. - - 212 / Brick Masonry / 27.01 / BDG 1 with Crush Sand

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. - - 261 / 32.11 / BDL 7

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. - - 237 / Paving Flooring and dado / 33.67 / BDM

Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete. - - 225 / Plastering and Pointing / 32.21 / BDL