Rural Development Department Tender

B) 50mm dia

Subwork no-1 Rising main

A) 80mm dia

25 mm dia Air valve1

subwork no-2 RCC GSR

Item No.7:- -Providing and laying in situ cement concrete mortar 1:2:4 of trap metal for foundation and bedding including bailing out water manually formwork compacting & curing etc. complete.

a)Lift 0.00-1.50

A) 50mm dia

Item No.6:-Providing & fixing in position M.S. .Air valve boxes fabricated with 2 mm thick M.S. plate, 30 x 30 x 3 mm size M.S. angle frame, concreting n M - 150 for fixing the box in position, applying two coats of oil paint, painting chainage, locking arrangement etc.complete as directed by Engineer in charge.

Item No.3: Providing and laying in situ cement concrete of trap / granite / quartzite / gneiss metal for R.C.C. work in foundation like raft grillage, strip foundation and footing of RCC columns and steel stanctions including normal dewatering, formwork, compaction finishing and curing ... etc. complete.(excluding M.S. or tor reinforcement)

Item No.5 - Lowering, laying and jointing in position following C.I.D./F. sluice valve & Air valve including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete.

Item No.3: Lowering, laying and jointing G.I. pipes and specials of following class and diameter including conveyance from stores to site of works all labour giving satisfactory hydraulic test etc. complete either underground or in vertical position as directed by Engineer-in-charge

Item No2:- Providng and supplyingflange Air valve confirming for IS 2906/14846 & 14845/2000 including worn gear arrangement as per test pressure stainless steel spindle, caps & including all taxes transportation etc.complete.

80mm dia

Item No.1: Providing and supplying G.I. pipes and special of following class and dia. in proper position grade and alignment as directed including conveyance to site of work cost of jointing material, labour giving satisfactory hydraulic testing including paying EIL inspecting charges ... etc. complete.

A) 80 mm dia

25 mm dia Air valve PN-1

Item No.2 Excavation for foundation / pipe trenches in hard murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding back filling, etc.complete.

Item No.4: Providing Uncoursed rubble masonry of trap stones in in cement mortar 1:6 in foundation and plinth of inner wall including racking out joints where plastering is to done, watering and scaffolding… etc. complete.

50mm dia

Item No.1-Designing (aesthetically), and constructing RCC Ground service reservoirs /RCC sump in m 300 mix of required capacityincluding Excavation in all type of strata fondation concrete, container wall, bottom slab,top RCC roof slab/dome 20 mm tk cement plaster with water proofing compund in cm 1:3 proportion to inside face of container including epoxy paint from in side in cluding refiiling and dispossing of surpluse stuff within lead of 50 meter all labour and material charges including lowering, laying,erecting,joisting and jointing of pipe assembly of inlet,outlet,washout, overflow and bypass arrangements consisting of CI/MSDF pipes specials and vaives of given daimeter providing and fixing accessories such as M.S.ladder, inside and outside C.I.manhole frame and covers B.B.masonry chambers for all valves, ventilating shafts,. and giving satisfactory water tightness test as per I.S.code,and providing three coats of cement paint to all expoose surfaces of structure including roof surface etc complete ss per design data criteria obligatory requitements and detailed

a)Lift 0.00-1.50