Rural Development Department Tender
... More
The RDD has issued a formal invitation for competitive bids for the Rural Development Department project, for Construction Of One Room Z.p.school Building At Khupsangi Tal. Mangalwedha in Solapur, Maharashtra, with an estimated contract value of Rs. 10,76,770. The bid opening date for this tender is 09-11-2026 and the last date for bid submission is 20-11-2026. Interested bidders for Rural Development Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Rural Development Department - RDD Tender - Maha Tender
Opening Date9 Nov 2026
Closing Soon20 Nov 2026
Tender Amount₹ 10,76,770
Costs
EMD
Refer DocumentsDocument Cost
₹ 500Tender Fee
₹ 500
Description
Construction Of One Room Z.p.school Building At Khupsangi Tal. Mangalwedha
Contact
Tender Id
2026_SOLAP_1353384_1Tender No
Construction Of One Room Z.P.School building at Khupsangi Tal. MangalwedhaTender Authority
Rural Development Department ViewPurchaser Address
-Website
https://rdd.maharashtra.gov.in/en
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
7.72
7459
57583
... More
Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed desig ns and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
3.82
14138
54007
... More
Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. Beam and Lintle as per detailed desig ns and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
7.43
12624
93796
... More
Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. Chajja as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be rovided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
0.2
14287
2857
... More
Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
7.18
14287
102581
... More
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.
3.04
7844
23846
... More
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in Superstructure of inner walls/ in external walls including , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.
10.27
8478
87069
... More
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
2.105
89958
189362
... More
Filling in plinth & floors with approved Excavated Material in layers of 15 to 23cm thk. Layer ,watering, compaction etc.
12.15
120
1458
... More
Filling in plinth & floors with Contractors murum laying in layers of 15 to 23cm thk. Layer ,watering, compaction etc.
13.54
599
8110
... More
Providing and fixing frame with/ without ventilator of size as specified with Country nonteak wood for doors and windows including chamfering, rounding, rebating, iron hold fast of size 300mm x 40mm x 5mm with oil painting, etc. complete.
0.05
107112
5356
... More
Providing and fixing solid core flush door shutter commercial in single leaf 32mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complet
1.89
2913
5506
... More
Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete
4.32
2097
9059
... More
Providing and laying telephone black/ amba white/ cadburybrown / Ruby red / Ocean brown granite stone of 18 to 20mm thick for door frame / dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/ moulding the sharp edges wherever necessary, curing, etc. complete
2.16
4412
9530
... More
Providing & fixing in position anodised ( as per I. S.1868 / 1982 ) alluminium Sliding windows of two tracksWith rectangular pipe 63x38.1x1.22 mm at wt.0.650kg/rmt&window frame bottom tracks section 61.85x31.75x1.2mm at weight 0.695kg/rmt top& side trak section 61.85x31.75x1.00mm at wt.0.417kg/rmt.The shutter should beof bearing bottom 40x18x1.25mm at wt.0.417kg/rmt inter locking section 40x18x1.10mm at wt.0.469kg/rmtand hadle section 52x18x1.13mm at wt.0.488kg/rmt& top section 40x18x1.25 mm at wt.0.417 kg as per drawings or as directed by Engineer incharge with all necessary alluminium sections including necessary fixitures and fastening such as, roller bearing in nylon casing and self locking catch fitted in vertical sections of shutter including 5mm thk.plain glass with all required screws& nuts alluminium latch, alluminium stay tower bolts PVC gaskets & rubber lining, alluminium screws, hinges etc. etc.a ) without powder coating Without Box DSR P. NO 84/41 As directed by engineer in-charge
4.32
4864
21012
... More
Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.
80.18
389
31190
... More
Providing internal cement plaster 12 mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.
60.26
283
17054
... More
Providing and laying vitrified matt finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete
48.38
1627
78714
... More
Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete.
105.87
216
22868
... More
Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete
80.18
261
20927
... More
Providing and fixing board displaying information,such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including excavation, refilling, transportation, and labour etc complete Spec. No. As directed by Engineer in Charge
1
9963
9963
... More
Quality Control Charges
1
5000
5000
... More
Add Royalry Charges of Sand
21.56
237
5118
... More
Add Royalry Charges of Murum
13.54
216
2927
... More
GST 18%
0.18
901462
162263

