Rural Development Department Tender

Item No. 3 :- Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means [Bd.A.3 Page No. 259] (S.S.R. I.No. 21.10)

Item No. 4 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd. E. 1 P.No. 287] (S.S.R.I.No. 24.01)

Item No. 5 :- Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd.F.3 P.No. 298 and B.7, P.No.38] (S.S.R.I.No. 25.11)

Item No. 6 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd.F.5 Page No. 300 and B.7, Page.No. 38] (S.S.R.I.No. 25.31)

Item No. 7 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd.F.6 Page No. 300 and B.7, Page No.38] (S.S.R.I.No. 25.50)

Item No. 8 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. [Bd.G.2 Page No. 313] (S.S.R.I.No. 27.01)

Item No. 9 :- Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. [Bd.A.10 Page No. 262] (S.S.R. I.No. 21.36)

Item No. 10 :- Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. [Bd.A.11 P.No.263 ] (S.S.R. I.No. 21.37)

Item No. 11 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.[Spec.No. :Bd.F.17 Page No 306] (S.S.R.I.No. 26.33)

Item No. 12 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete [Spec.No. :Bd.G.5 Page No. 315] (S.S.R.I.No. 27.05)

Item No. 13 :- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. [Bd. L.2 P.No. 368] (S.S.R. I.No. 32.04 P.No. 201)

Item No. 14 :- Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. [Bd.L.1 P.No. 367 ] (C.S.R.I.No. 32.34 P.No. 203)

Item No. 15 :- Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. [Bd.L.8 P.No. 370] (S.S.R. I.No. 32.12)

Item No. 16 :- Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring [Bd.M. 12 Page No.385] (S.S.R. I.No. 33.40)

Item No. 17 :- Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. [As directed by Engineer Inchage] (S.S.R.I.No. 35.21)

Item No. 18 :- Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. [Bd.P.6 P.No. 414 & Pre-approval of Superintending Engineer] (S.S.R. I.No. 36.14)

Item No 19 :- Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease dirt & other materials as required etc complete [As directed by Engineer incharge] (S.S.R.I.No. 35.24)

Item No. 20 :- Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Bd.C.2 Page No. 275 (S.S.R.I.No. 23.01 P.No. 167)

Item No. 21 :- Providing & fixing colour coated Zincalume ( R ) AZ150 (min 150 gms/sq.mt total on each side) profiled sheets for roofing the feed material is manufactured outof nominal 0.45mm base metal thickness (BMT) (0.5mm TCT) Hi-strength steel with min550 MPa yield strength metallic hot dip coated with aluminium -zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with colorbond (R) steel quality super durable polyester paint coat (with inorganic pigment) The paint shall have a total coating thickness of nominal 35 um comprising of nominal 25um exterior coat on top surface & nominal 10um reverse coat on back surface Profile sheet shall have nom 950-1050mm effective cover width & nominal 25-30mm deep ribs with subtle square fluting in the five pan at nominal 180-250mm C/C The end rib shall be designed for anti-capillary groove & return leg The feed material should have coil manufacturers product details marked a regular interval Including fasteners with min fastened with min 25um Zinc-Tin alloy coated Hex head self-drilling screw etc complete (weight of profile 4.52 kg/sqm) (S.S.R.I.No. 38.34 P.No. 227)

Item No. 22 :- Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.) [BD-T-53 P.No. 509] (S.S.R.I.No. 39.20)

Item No. 23 :- Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). [BD-T-57 P.No. 511] (S.S.R. I.No. 39.26 P.No. 238)

Item No 24 :- Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. As directed by Engineer in Charge (S.S.R.I.No. 6.36 )