Rural Development Department Tender

Item No.3:- Excavation in soft rock without blasting including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated soft rock neatly in dump area or for formation of service road including cost of all materials, machinery,labour, dressing bed & sides to required level and profile etc.complete with leads as below and all lifts as directed.A) For 15 m Lead

Item No.4 :- Excavation in hard rock of all toughness by blasting including boulders above 0.60 m dia.(0.113Cum) minimizing damage to side slopes of excavation in water prism area by adopting any one or combination of line drilling /pre-splitting /smooth blasting techniques and placing the excavated rock neatly in approved dump area including cost of all materials,achinery,labour leveling bed etc., complete with leads as below and all lifts as directed.A) For 15 m Lead

ITEM NO. 48:- Providing, fabricating and placing in position reinforcement steel for RCC works including cutting, bending, hooking, laying in position and tying M.S./ HYSD / TMT bars for reinforcement of R.C.C. work as per detailed drawing etc. complete as directed.

ITEM NO. 31 :- Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement / RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face,energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer with shuttering and scaffolding, placing, compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed.(A) M-15 (20 MSA) (Cement 5.64 bags/Cum)

Item No.207 :- Provding and Fixing M. S. Channel 150 X75 mm. 14.4 Kg/m as per design & drawing including all labours etc. completed - JPC Market Price Retail for 2nd May 2023

Item No.182A :- Straight Needle K.T. Weir Gate - Manufacturing- Manufacturing with QAP & fabrication of KT weir needle gates -straight type size 2.15 x 0.5M - 94 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, machinery charges, km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177.

Item No. 92 :- Providing and fixing canal information board of 1.20 x 0.75 m prepared on 16 gauge M.S sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green / white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border/letters/arrows coated with non-peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50 x 50 x 5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30cm with four numbers high strength of G.I.bolts and nuts of size 10mm dia.and 20mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60x60x75 cm as directed.