National Environmental Engineering Research Institute Tender
... More
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
National Environmental Engineering Research Institute - NEERI Tender
Civil And Construction
Building Construction
Eprocure
Opening Date23 Apr 2025
Closing Date2 May 2025
Tender Amount₹ 97,24,272
Costs
EMD
₹ 1,95,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Miscellaneous Civil Works In Neeri Colony Premises At Csir-neeri, Nagpur
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CSIR_233495_1Tender No
50(67)/2024-25/WTender Authority
National Environmental Engineering Research Institute ViewPurchaser Address
-Website
http://csir.res.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and fixing glass strips in joints of terrazo/ cement concrete floors. steps, landing, pavements etc. 40 mm wide and 40 mm thick
50
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
30
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil : Pipes, cables etc. exceeding 80mm dia. but not exceeding 300 mm dia.
200
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
20
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
15
-
-
... More
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, , bed plates/covers, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).
5
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
300
-
-
... More
Providing and fixing in position factory made precast RCC M-40 doors and windows frames having excellent smooth finish as per IS: 6523 with reinforcement of 3 Nos, 6 mm dia main bars tied with 3 mm M.S stirrups placed @ 200 mm C/C and 6 numbers high strength polymer blocks of required size for fixing hinges including providing 6 no specially designed M.S. galvanised sleeves for accomodating 6 mm dia fully threaded bolts for fixing hold fast on vertical members, providing suitable arrangement for recieving sliding door bolts and tower bolt etc all complete, as per the direction of Engineer in charge. (The cost of hold fast and cc block of 1:3:6 mix is also included in the item.) The frame shall be measured in running meter correct to two places of decimal. Door frame 100 mmx 60 mm
40
-
-
... More
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 coarse sand)
5
-
-
... More
Half brick masonry with non modular fly ash bricks of class designation 10, conforming to IS : 12894, in super structure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand)
20
-
-
... More
Taking out existing wooden door shutter, repair by cutting,painting etc. and refixing of repaired door shutters to existing door frames,including replacement of hinges with screws,etc. as required, all complete as per the direction of engineer in charge.
274
-
-
... More
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer’s specifications. This ncludes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
20
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
30
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws
15
-
-
... More
Extra for providing lipping with 2nd class teak wood battens 25mm minimum depth on edges of flush door shutters (Over all area of door shutter to be measured)
45
-
-
... More
Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
120
-
-
... More
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :
-
-
-
... More
100 x 60 x 2.50 mm
120
-
-
... More
75 x 50 x 2.50 mm
10
-
-
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper
20
-
-
... More
Providing and fixing aluminium sliding door bolts, latch ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
-
-
-
... More
300x16 mm
50
-
-
... More
250x16 mm
50
-
-
... More
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 250x10 mm
30
-
-
... More
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
... More
125 mm
50
-
-
... More
100 mm
50
-
-
... More
Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150mm
5
-
-
... More
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails
-
-
-
... More
shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. 30 mm thick plain PVC door shutters
30
-
-
... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.
1700
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
225
-
-
... More
Providing and laying rectified glazed ceramic floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.
110
-
-
... More
Providing and fixing on wall face un plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes. 75mm diameter
50
-
-
... More
Providing and fixing on wall face un plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Single socketed pipes. 110 mm diameter
200
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.50 75 mm bend
15
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.50 110 mm bend
30
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75mm
25
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm
120
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
5
-
-
... More
12 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)
250
-
-
... More
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement : 4 coarse sand)
150
-
-
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape,raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar,including disposal of rubbish, all complete as per the direction of Engineer-in-charge
25
-
-
... More
Removing dry or oil bound distemper by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
3000
-
-
... More
Providing and applying white cement based putty of average thickness 1mm , of approved brand and manufacturer, over the plastered wall surface even and smooth complete.
1500
-
-
... More
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and m anufacture, including applying additional coats wherever required, to achieve even shade and colour. Two or more coat
2000
-
-
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats
1000
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work
300
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and
manufacture
350
-
-
... More
Renewing glass panes, with putty and nails wherever necessaryincluding racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
20
-
-
... More
Renewal of old putty of glass panes (length)
20
-
-
... More
Cleaning and desilting of gully trap chamber, including removal of rebbish mixed with earth etc. and disposal of same all as per direction of engineer-in-charge.
200
-
-
... More
Demolishing cement concrete including disposal of material within 50 metres lead as per direction of engineer in charge. 1:3:6 or richer mix
25
-
-
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
15
-
-
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area 3 sq. metres and below
65
-
-
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below
200
-
-
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
300
-
-
... More
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall
300
-
-
... More
Dismantling of flushing cistern / washbasin / sink etc. of any size including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
120
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x460 mm bowl depth 200 mm
20
-
-
... More
Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-incharge. : Orissa pattern W.C. pan of size 580x440 mm
15
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
20
-
-
... More
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White
45
-
-
... More
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid
30
-
-
... More
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:
-
-
-
... More
Flat back wash basin of size 550x400mm.
25
-
-
... More
Flat back wash basin of size 450x300mm.
3
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32mm dia.
50
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
30
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc. (internal work). pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. 15 mm dia nominal bore
200
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall.
-
-
-
... More
15 mm dia. nominal bore
250
-
-
... More
20 mm dia. nominal bore
20
-
-
... More
25 mm dia. nominal bore
20
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
... More
25 mm nominal bore
20
-
-
... More
20 mm nominal bore
5
-
-
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm dia nominal bore
150
-
-
... More
Providing and fixing ISI ball valve (brass) of approved quality, High or low pressure, with plastic floats complete: 15mm nominal bore.
150
-
-
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work).
-
-
-
... More
15 mm nominal bore
75
-
-
... More
20mm nominal bore
10
-
-
... More
25 mm nominal bore
25
-
-
... More
Providing & fixing CP brass bib cock of approved quality conforming to IS: 8931. 15mm nominal bore
100
-
-
... More
Providing and fixing C.P. brass stop cock ( Concealed)of standard design and of approved make conforming to IS:8931 15 mm nominal bore
20
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931. 15 mm nominal bore
70
-
-
... More
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I./A.C Pipes :
-
-
-
... More
75 mm dia pipe
20
-
-
... More
100 mm dia pipe
20
-
-
... More
Disconnecting damaged overhead/ terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per the direction of Engineer-In- Charge.
20
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
12000
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including
-
-
-
... More
C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
-
-
... More
Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
7
-
-
... More
Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) :Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5
10
-
-
... More
Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm and down )
20
-
-
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase
200
-
-
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured.
250
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing polymer compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing polymer compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
140
-
-
... More
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres sucion capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial disilting og manholes of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth.
1000
-
-
... More
Providing and fixing on wall face plasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
Single tee with door 110x110x110 mm
20
-
-
... More
Single tee without door 75x75x75 mm
10
-
-
... More
Shoe (Plain) 110 mm Shoe
20
-
-
... More
Making connection of G.I. /C.P.V.C distribution branch with G.I./C.P.V.C main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 15 to 40 mm nominal bore
35
-
-
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :For pipes 100 to 250 mm diameter
35
-
-
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :
-
-
-
... More
15 mm nominal bore
5
-
-
... More
25 mm nominal bore
1
-
-
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
200
-
-
... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
60
-
-
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
15
-
-
... More
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab upto 0.50 sqm.
40
-
-
... More
Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS: 733 and IS: 1285, anodised transparent of dyed to required shade according to IS: 1868. (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing and panelling to be paid for separately.)
-
-
-
... More
For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)
350
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
400
-
-
... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia. 0.50 mm all complete.
-
-
-
... More
With 2nd class teak wood beading 62X19 mm.
100
-
-
... More
With 12 mm mild steel U beading.
50
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not
less than 10 kg/ sqm)
150
-
-
... More
Cleaning of terrace/ loft water storage tank (inside surface area) upto 2000 litre capacity at all height with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Enginerr-in-charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.1 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)
125000
-
-
... More
Painting with aluminium paint of approved brand and manufacture to give an even shade .Two or more coats on new work
150
-
-
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area beyond 3 sq. metres
50
-
-
... More
Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.: Hot finished welded type tubes
1000
-
-
... More
Provided & fixing precoated galvanised iron tile profile sheets ( size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge.
-
-
-
... More
The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required .
100
-
-
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 gm per sqm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : North light curves.
20
-
-
... More
Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms.
20
-
-
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
220
-
-
... More
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :75 to 80 mm dia pipe
200
-
-
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm
50
-
-
... More
Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps :100 mm diameter
250
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
4.5
-
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work
200
-
-
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 MM depth and 5 mm width
300
-
-
... More
Chipping/dismanteling of unsound/ weak concrete material from slabs, beams,columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges,making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 25 mm average thickness
250
-
-
... More
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer
400
-
-
... More
Providing & Applying weather proof sealant on outer joints of approved make confirming to IS & directed by Engineer-in-charge. Sealant 25mmx10mm at joints
150
-
-
... More
Supplying and fixing 10 Gauge weld mesh of size 100mm x100 mm for floor/roof slab concrete screed over the micro beams as reinforcement. The weld mesh shall be fixed as per drawing.
250
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall:
-
-
-
... More
20 mm nominal dia Pipes
200
-
-
... More
25 mm nominal dia Pipes
50
-
-
... More
Removing,repairing of two leaf M.S. gate after changing the position of gassen pin( If required) with necessary welding work ,providing level adjusting washers for uplifting of the gates upto required height above floor level etc. complete as per the direction of engineering -in-charge.
5
-
-
... More
Supplying & laying murum below floor and plinth including watering compacting & consolidating in layer not more than 200mm thick etc. complete.as per the instruction of Engineer in charge.
10
-
-
... More
Making the free movement of existing steel window shutters , replacement of faulty hinges/pivots ( Heavy type)with new one, providing& fixing steel window handles,pegstays and repairing of shutters if required.etc. Complete as per the direction of Engineer-in-charge.Rate inclusive of removing & refixing the steel window shutter,chipping of sills & jambs for the shutters to be freely openable/ functionable properly , repairing of the sills & jambs etc.
20
-
-
... More
Dismantiling of kadappa stone provided above plinth maually upto three floor level and staking the useful materials in department's store and disposal of unserviceable materials within 1KM lead as per direction of Engineer-in-chrage.
30
-
-
... More
Providing and fixing kadappa stone 20-30mm thick for kitchen platforms, shelf and similar locations of required size of approved shade and colour laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement,making chases for encasing stones , mixed with matching pigment, epoxy touch ups, curing etc. complete upto three floor levels.
30
-
-
... More
Providing and fixing on wall face unplasticised - PVC (SWR type 'A',working pressure 4 Kg per sqcm ) pipes accessories conforming to IS: 14735 including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion as approved by the Engineer in charge. Cowl 110mm
20
-
-
... More
Providing & Fixing PVC rigid pipe (for pressure 4 kg/sqcm) approved make and quality for drainage including cutting , jointing & fixing with tread coupling,bend ,Tee ,elbow ,coupling, clamps etc complete.
-
-
-
... More
50 mm Diameter
15
-
-
... More
40 mm Diameter
400
-
-
... More
Removing of exisitng flushing cistern outlet pipe and refixing the same to newly installed Orrisa pattern WC pan or White vitreous china pedestal type (European type/wash down type) water closet pan including sealing of joint etc. complete as per the direction of Engineer-in-charge.
20
-
-
... More
Reparing and installing P.V.C. low level flushing cistern of 10Litre capacity by replacing float/washer/Siphon/Handle or all etc. complete as per the direction of engineer-in-charge.
50
-
-
... More
Providing & fixing Health Faucet model no ALE- ESS-583 (Heavy Duty) for EWC / WC along with 1.2m long PVC tube & wall hook and other fittings of approved quality as per the directions of Engineer-in-charge.
40
-
-
... More
Providing and fixing gun metal gate valve ( ISI)with C.I. wheel of approved quality as per the instruction of Engineer-In-charge. 15 mm nominal bore
50
-
-
... More
Removing, repairing and refixing of float valve (brass) by replacing plastic ball /brass road (min 250mm)stick of approved quality etc. complete as per the direction of engineer-in-cahrge: 15 mm nominal bore
100
-
-
... More
Providing and fixing 4" C.P Waste Coupling and 1 1/4"/ 1 1/2" flexible PVC waste pipe for S S Kitchen Sink (Premium Quality) of approved quality etc. complete as per the direction of engineer-in-charge.
40
-
-
... More
Providing and fixing C.P Sink Cock APR-101337Nwith swinging spout wall mounted with wall flange, C.P extension nipple for required length (Heavy duty) of approved quality etc. complete as per the direction of engineer-in-charge. 15 mm nominal bore
30
-
-
... More
Providing and fixing C.P overhead shower 125mm EOS 542A with shower arm 240mm ALE 536A , wall flange of approved quality etc. complete as per the direction of engineer-in-charge. 15 mm nominal bore
50
-
-
... More
Removing, Repairing and refixing of bib cock/pillar cock / stop cock/ angle valve by replacing the spindle, washer of good quality etc. complete as per the direction of engineer-in-charge. 15 mm nominal bore
200
-
-
... More
Providing & Fixing 100 mm to 110mm Heavy Stainless Steel Jali (with or without hole for fixing drainage pipe) approved make /quality by Engineer Incharge for any type of traps etc complete.
50
-
-
... More
Providing & fixing P.V.C water tank cover suitable for existing 500 litre capacity tank and suitable locking arrangement of approved quality as per the directions of Engineer-in-charge.
15
-
-
... More
Providing and fixing C.P two way bib Cock (TQT 512AN) with wall flange, of approved quality etc. complete as per the direction of engineer-in-charge. 15 mm nominal bore
30
-
-
... More
Providing and fixing C.P Pillar Cock (TQT 508) with super delux with aerator of approved quality etc. complete as per the direction of engineer-in-charge. 15 mm nominal bore
75
-
-
... More
Refixing of the dismantled wash basin / europian WC with all fittings like flushing cystern /pillar cock/ Health Faucet/water connection /pillar cock / stop cock/ angle valve/ wastepipe/ P or S trap etc. complete as per the direction of engineer-in-charge. Rate includes replacement of necessary hanging bolts for wash basin/ EWC and if any repairing work requires.
20
-
-
... More
Cleaning the existing sewer line connecting the manholes by using chokage removing MS rods/bamboo etc. complete as per the direction of Engineer-in-charge.
1000
-
-
... More
Cleaning of Manhole chamber by taking out sludge/waste material blocked in the manhole of the building and disposal of the same with a lead of 500 mtrs as per the direction of Engineer-in-charge.
150
-
-
... More
Providing and fixing C.P waste coupling 32 ALE 544 NFT / 40mm ALE 543 HT dia, half thread with 80 mm height of approved quality etc. complet as per the direction of engineer-in-charge.
40
-
-
... More
Trimming of the tree branches (above ground level and up to the height of two stroy building) by mechanical /manual means which are causing damage to the adjacent structure and the branches which are about to fall including stacking of the cut branches in the premises with a lead and lift up to 100 m etc. complete as per the direction of the Engineer in charge.
-
-
-
... More
Branch of diameter up to 100 mm having length up to 5 Mtr
230
-
-
... More
Branch of diameter above 100 mm up to 200 mm having length up to 5 Mtr
200
-
-
... More
Providing and fixing consealed lock (Alboss Item No. 81 ) for aluminium window including necessary cutting and making good etc. complete.
150
-
-
... More
Dismantling Precast concrete jali in walls,partition walls etc. including stacking within 50 metres lead: Thickness up to 50 mm
200
-
-
... More
Providing and fixing Stainless steel decorative curtain Knobs in Round/ oval shape for 25mm dia Curtain rod wiith necessary screws etc. complete approved by Engineer In Charge.
300
-
-
... More
Providing and fixing Stainless steel Consealed bracket for 25mm dia Curtain Rod wiith necessary screws etc. complete.
300
-
-
... More
Providing and fixing Stainless steel Side supports for 25mm dia Curtain Rod wiith necessary screws etc. complete.
350
-
-
... More
Providing and fixing 25mm dia. Stainless steel Curtain Rod thickness 0.5 to 0.8 mm in reqired sizes according to the opening & curtain brackets etc. complete.
350
-
-
... More
Removing, applying and refixing the existing drainage jalli as per the methods given below :- A) Removing existing drainage jalli ( one or two)properly , cleaning& rubbing periferial vertical surface from the floor edge to bottom of trap with cloth & steel spring wires(for using cleaning steel utensils)
-
-
-
... More
B) Applyingthe bonding agent directly to vertical surface from the floor edge to bottom of trap properly with the help of brush.C)Filling the mixture of cement and bonding agent ( 1: 1 by volume) to vertical surface from the floor edge to bottom of trap properly as per the direction of Engineer InchargeD ) Refix the existing jally in proper postion with the help of cement slury and bonding agent as per the direction of Engineer Incharge
10
-
-
... More
Providing and fixing M.S.Steel Window Handles (Approved heavy type) as per the direction of Engineer-In-charge.
10
-
-
... More
Providing and fixing 300 mm long M.S.Steel Window Peg stays (Approved heavy type) as per the direction of Engineer-In-charge.
10
-
-
... More
Repairing,welding,replacing the springs greasing of existing rolling shutter not more than 15 Sqm. and making it operational etc. complete as per the direction of engineering -in-charge.
5
-
-
... More
Providing, laying and fixing 160mm OD eco drain pipe conforming to IS: 15328 including jointing with required glue/ sealent of premium approved quality for drainage, sewer lines as approved by the Engineer in charge.
200
-
-
... More
Dismantling existing rain waterpipe opening, making opening for bigger dia pipe upto 160mm dia , fixing the new pipe and repairing both the surface by applying bonding agent & finishing with polimer plaster including stacking, depositing the pipe within 1 Km lead etc.complete as per the direction of Engineer Incharge. (Pipe will be paid seperately)
60
-
-
... More
Dismantling, removing& cleaning of old existing filling,concrete laid below floor,sunken portion upto base slab( Upto 1m Depth) top including stacking of serviceable material and disposal of unserviceable material with all lead within 1 KM lead as per the direction of Engineer-in-charge
150
-
-
... More
Providing and fixing C.P. towel rail 600mm long (Hooks on both sides) not less than 180 gms fixed with necessary screws/ plugs etc. complete as per the instruction of Engineer-In-charge. (As per the Sample available at Department)
20
-
-
... More
Reparing of consealed flushing Cystern including replacement of faulty parts like washer,Siphon,net washer, push rods or any required parts etc. complete as per the direction of engineer-in-charge.
4
-
-
... More
Providing and fixing on floor 110x75mm PVC(SWR) Nanhi trap with necessary concrete, making necessary holes etc complete conforming to IS of make as approved by the Engineer in charge.
25
-
-
... More
Removing the existing PVC water storage tank upto 1000 liter carefully including all fittings, connections,fixing the same temporarily for the water usage and removing the temporary arrangement & refixing the same after repairing (If required) with necessary tank nipple, etc. complete as per the direction of engineering -in-charge. One time Payment will be paid for full activity.
10
-
-
... More
Extra for providing and mixing polymer water proofing material(1 polymer : 2 cement) in Water Proofing treatment on roof of slabs instead of waterproofing cement compound, etc. complete as per the direction of engineering -in-charge.
350
-
-
... More
Removing existing mosquito net carefuly (without spoiling the beading) from T W beading , bundled the same and submitted/ deposited the net bundle at CSIR- NEERI store etc. complete as per the direction of Engineer-in-charge.
100
-
-
... More
Making the free movement of existing aluminium sliding window shutters , replacement of faulty S S bearings/rollers ( Heavy type) with new one if required , and repairing of shutters if required.etc. Complete as per the direction of Engineer-in-charge.Rate inclusive of removing & refixing the aluminium window shutters to be freely openable/ functionable properly etc.complete.
10
-
-
... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
50
-
-
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
... More
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1%concentration
450
-
-
... More
Treatment of existing masonry using chemical emulsion @one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement: 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/ Lindane E.C. 20% with 1%concentration and spraying the same above the wall surfaces also.
640
-
-
... More
Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.
565
-
-
... More
Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge.
5
-
-
... More
Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-In-Charge.
25
-
-
... More
Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Epoxy injection grout in concrete/RCC work of approved make
10
-
-
... More
Providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing arrangement to ensure that it remains in position for the work duration as required by the Engineer-in-charge. Wooven PVC cloth
150
-
-
... More
Providing and fixing 1.2 mm thick perforated G.I sheets after removing the existing worn out sheets including cutting , welding, grinding and fixing in sliding & openable gates etc. complete.
10
-
-
... More
Replacement of existing worn out 30mm X 75mm dia.M.S. Heavy roller wheels for sliding gate after removing the existing worn out rollers , with required nutt& bolts,washers, necessary repairs,miscellanious items, welding ,grinding , etc. Complete.
12
-
-
... More
Removing&repairing of two leaf sliding gates properly so that the gates will be operated smoothly with necessary welding work , level adjusting / uplifting the rod below both the gates etc. complete as per the direction of engineering -in-charge.
2
-
-
... More
Excavation, cleaning removal of the building rubbish / malba, soil,wooden logs, dried fallen trees,bushes etc., including loading by mechnical means using hydraulic excavator, (3D) with driver and fuel charges,etc. complete as per the direction of Engineer-in-charge. (Payment will be made for deployment of Hydraulic excavator on per day basis for eight hours work done per day).
10
-
-
... More
Carriage and unloading of building rubbish /malba, soil,wooden logs, dried trees etc. material with in the NEERI premises as per the direction of engineer-in-charge by mechnical means, using hydraulic operated truck of capacity 200-250 cuft with driver and fuel charges etc. complete as per the direction of Engineer-in-charge. (Payment will be made for deployment of truck on per day basis for eight hours work done per day).
20
-
-
... More
Cuting dried, fallen tree wooden logs with the help of petrol operated chain saw with operator and fuel etc. complete. (Payment will be made for deployment of chain saw along with operator and required fuel, engine oil, on per day basis for eight hours work done per day).
5
-
-
... More
Supply of unskilled labours for work mentioned below on daily wages as per the wages not less than the latest wages for the employee in construction or maintenance work in building operation as per notification No.92(1)/2017-MWA dated 05/10/2018 published by office or the regional labour commissioner (Central) including all taxes and contractor profit etc. Complete.(A) A.Clearing of material which is spread around the hydraulic operator machine after loading of material in to the truck(B)Cleaning of small surface wherehydraulic operator machine unable to reach, stacking the material. (C) Cutting & lifting the wooden logs of fallen trees of identified areas by axe,saw, machine in small pieces with shifting and stacking as per the instructions. (DCleaning the area by coconut brooming. Note:- Manpower deployed on per day basis for eight hours a day. Contractor have to supply all the machinary equipments like brooms, spades,axe etc. along with safety Gadgets for the labours.Payment will be made per day basis for eight hours work done per day.
50
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements