Municipal Corporation Tender

• Baby Digital Thermometer - Technical Specification of Baby digital Thermometer • Range 0.1 to 1000 degree centigrade • Measurement mode- Min, Max, Average, differential, dual temperature reading • Measurement unit- degree Centigrade, degree Fahrenheit, Kelvin • Temperature probe with connecting cable • Relative humidity10 to 90% RH non-condensing • IP rating- IP 40 g) Probe response time 2-3 Seconds • It should be WHO & UNICEF Standards

• Delivery Trolley/Patient Stretcher Trolley- Technical Specification of Patient Stretcher Trolley • Overall Size: 1905mm L x 710mm W x 660mm To 910 mm H. • Stretcher dimension 1830 mm L x 555 mm W.  Two section top. Height adjusted by foot operated maintenance free hydraulic pump. • Height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 KN at 270 bars, number of complete pump stroke 22 to 24 for full stroke length • X-ray permeable removable stretcher, Backrest raised on ratchet. Quick Trendelenburg as well as reverse Trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. • S.S. saline rod with 12 mm dia S.S. rod shall telescope in SS socket tube approx. 15.8 mm dia x 18G welded on angular base bracket of 14G SS sheet. • Nylon bracket provided to prevent colour damage. It could be placed at four different locations. Complete with sliding X-ray cassette holder, storage tray Trolley shall be mounted on 125 mm dia non-rusting imported castor wheels two with brakes and two without. Castor housing and wheels made from high grade non floor-staining synthetic materials with integrated thread guards. • Wheel centre having precision ball bearing to run smoothly. Complete with corner buffers, one on each corner. Covered handles. Oxygen cylinder arrangement. • It shall have a pair of Stainless steel tuck down type railings made of 19 mm dia x 18G tube fitted with M.S.brackets. • Effective railing height above main frame is approx. 235 mm & length of the railing is 1175 mm. • All MS parts and 8 tank Pre-treated & powder coated & SS parts finished with Matt polish. • Mattress should be provided with a size 2 inch thickness PU foam which can be fixed to the trolley by Valero similar mechanism. • should be ISO/ CE Certified

• Oxygen Hood - Technical Specification of Oxygen Hood • It should be connected to an O2 source and may be used concurrently with increased humidification and temperature control. • This device should be able to connect with tubing and diffuser (to disperse the flow of incoming O2) • Device should be reusable device • Technical Characteristics:-Transparent polycarbonate unbreakable single moulded silicon rubber neck port adjustment enabled to minimize the wastages of oxygen, silicon rubber neck port adjustment to ensure use un neonate/Infant/paediatric patients ,Oxygen inlet port • Dimensions (Metric )- Small size for infant patients • Weight-extremely light weight • User's care, Cleaning, Disinfection& Sterility issues–Complete unit to be easily washable & sterilisable using both alcohol and chlorine agents. • Standards and safety:- • Certificates - Should be CE / USFDA/ISO -13485/ BIS approved. • Warranty- 3 year

Kidney Tray “8” Technical Specification • material should be ss304 • should be ISI/BIS /CE/ISO Certified

• Small SS Steel Bowl with Lid Technical Specification Small SS Steel Bowl • material should be medical grade • Surgical instrument should be ISI/BIS /CE/ISO Certified

• S.S. Tray Big 12X11 with Lid Technical Specification S.S. Tray • material should be medical grade • should be ISI/BIS /CE/ISO Certified

• Cuscus Speculum Technical Specification • material should be medical grade • Surgical instrument should be ISI/BIS /CE/ISO Certified

• Mayo Scissor Curved Technical Specification • material should be medical grade • Surgical instrument should be ISI/BIS /CE/ISO Certified

• Sponge Holder Technical Specification • material should be medical grade • Surgical instrument should be ISI/BIS /CE/ISO Certified

• ARTERY FORCEP Technical Specification • material should be medical grade • Surgical instrument should be ISI/BIS /CE/ISO Certified