Mumbai Railway Vikas Corporation Limited Tender
... More
The MRVCL has issued a formal invitation for competitive bids for the Mumbai Railway Vikas Corporation Limited project, for Construction Of Multi-storied Residential Quarters, 48 Nos. (g+28) And Other Allied Works At Nirmal Park Railway Colony, Byculla, Mumbai (green Building) in Mumbai, Maharashtra, with an estimated contract value of Rs. 89,58,55,578. The bid opening date for this tender is 30-04-2025 and the last date for bid submission is 12-06-2025. Interested bidders for Mumbai Railway Vikas Corporation Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Mumbai Railway Vikas Corporation Limited - MRVCL Tender
Civil And Construction
Building Construction
Ireps
Opening Date30 Apr 2025
Closing Soon12 Jun 2025
Tender Amount₹ 89,58,55,578
Costs
EMD
₹ 54,40,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
MRVC-W-394-QRS-NIRMALPARK-MRVC-HQ-CIVIL/MRVCLTender No
MRVC-W-394-QRS-NIRMALPARKTender Authority
Mumbai Railway Vikas Corporation Limited ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
150
570
85560
... More
80A rating, 240/415 V, 16 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB as required.
-
-
17659.4
... More
Drilling with core cutting machine in RCC slabs, walls etc.wherever required in buildings, manholes,ducts, water tanks, pits etc. for laying pipes,sleeves and making good the same 34 to give an even finish . The rate shall include the cost of drilling core, providing EPOXY based water proofing compound for sealing the joints around the pipes, nominal reinforcement wherever required,scaffolding and labour charges for working at all levels ,leads and heights. Maximum thickness of RCC members shall be 300mm) and as directed by Engineer-In-Charge.
-
-
563584
... More
Supply & Installation of stainless steel Earth stud of dimension 70 x 70 mm integrated inside concrete and should be tested for electrical resistivity, salt spray and humidity test & short circuit to meet the requirements of IS/IEC 62305 and IEC 62561-1&2.5.
9
2906
26154.45
... More
Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various 37 sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.
500
213
106950
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
-
-
6999245
... More
Supply & Installation of D-clamp for interconnecting 10 mm Round Conductor with reinforcement rebar at every 2Mtr to meet the requirements of IS/IEC 62305.
53
396
21027.75
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
92534.5
... More
Supplying & fixing SS Curtain rod 25mm dia including labour, tools, plants, machinery etc.complete with all lead & lift.
-
-
2
... More
Supplying and fixing 2way bib cock Complete ORP-10041PM Jaquar or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In- charge etc. complete in all respect.
245
2516
616576.8
... More
Supplying and fixing Liquid Soap dispenser with ss bottle make- Jaquar, model ACN- 1137N or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect.
245
3657
896190.4
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
775250
... More
Supplying and installing cast iron Butterfly valves PN 16 completewith both sides including flanges on receiving pipes with nuts, bolts,1.5mm thick compressed asbestos gasket insertion as required.100 mm dia.
4
6538
26154.24
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
109335
... More
Supplying & Fixing & Testing Pressure reducing Valve of Diaphram type & inbuilt SS strainer type with pressure gauge necessary connectors. e) PROVIDING & FIXING 32MM PRESSURE REDUCING VALVE ON DOWN TAKE WATER SUPPLY (Diaphram type with inbuilt ss strainer)
6
7080
42483.84
... More
Supplying & fixing 40 mm thick DI heavy Rain water grating over storm water channel of heavy duty. a) 600 x 300 MM(300wide)
-
-
65
... More
Providing & Fixing corner guard for columns at parking area size W100 x H800 x 8mm colour: Black with yellow or White Reflective Stickers Body Material: Modified Thermoplastics (Polymer Rubberized) Fixing: Fixed on the wall & corner of columns with six 2" Screws.
186
916
170405.76
... More
Supplying & fixing 600 mm (24") to 750 mm (2'- 6") long screwed G.I. C class pipe with 42 3 mm thick M.S. bar flange (plate) welded on it: Flanges should be of Table E of approved make. (Puddle Flange) d) 150 mm(6")dia pipe 7 mm thick with 300 X 300 (12" X 12") plate, Both ends Flanged
2
5778
11556.16
... More
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete :
-
-
882990
... More
Providing & Supplying & Fixing 100 mm dia. P trap Suspended type floor Drain of standard design As per IS.
260
2624
682281.6
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required :
-
-
35802
... More
Providing and fixing 12 mm thick frameless toughened glass with door shutter of 17 approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary hole, Door handle, lock and stopper etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (D1)
41
11162
457667.83
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth
-
-
640694
... More
Providing sand face cement plaster 20 mm thick over masonry walls/concrete surfaces in all positions in two coats in 1:4 mix of cement mortar with Ready Mix Mortar including finsishing smooth etc complete with all contractors material,labours ,tools,& plants , scaffolding ,water , consumables etc. complete with all lead and lift.The Rate includes cost of Ready Mix mortar, cement , natural sand , Chickenmesh wherever required including All tools, manpower , plants , scaffolding 6 ,curing etc. complete with all lead and lift in all respect. NOTE: 1. Ready mix plaster of approved brand available in market manufactured with well graded & high quality river sand along with approved brand of cement , water soluble additives and fiber shall be used for Plaster. 2. Mechanical mixture shall be used for mixing water in ready mix plaster. 3. In exceptional circumstances with prior approval of Engineer in charge, if site mix cement mortar with natural river sand is used for plaster in place of ready mix material, payment will be made at 75% of accepted rate of this item. i.e. rate will be reduced by 25% 4. Only natural river sand shall be used for plaster.
22600.8
543
12276754.56
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except 30 burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
6781
1139
7723559
... More
Providing and applying a base coat comprising of 1 Kg Polydee-MC and 1 Kg fresh 22 cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A : 1 B) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs.covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete.
805
1529
1231569.5
... More
Supplying & Fixing 3 mm thick lead flashing in single piece of lead sheet all around the rain water outlet mouth on a layer of cold bitmen including heavy duty 5 mm thick C.I. grating, b) 230 x 230 (9" x 9") square or dia outlet for 150 mm (6") pipe
5
789
3948
... More
Supply & Installation of 10 mm copper bonded Solid Steel Round Conductor with 10 minimum coating thickness 70m as earth ring conductor. Material should be tested Tensile strength, Electrical Resistance, salt mist, Bend & Adhesion to meet the requirements of IS/ IEC 62305 and IEC 62561- 1&2.
175
845
147918.75
... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete
330
510
168540.9
... More
Supplying erecting and commissioning of diesel Engine fire fighting pump, horizontal split casing pump model 2850 LPM is 150metre Head coupled with Suitable HP/1500 rpm radiater cooled engine model 4R 1040T , complete with necessary accessories , pipes mounting stand, engine 28 mounted control panel, battery.12V,-180 AH, 200 Litre fuel tank, First fill of engine oil, coolent and diesel etc. complete assembly for fire fighting system.motor rating M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Pumps shall be Factory Acceptance Test. Pump shall be capable of delivering 150% of the rated capacity IE3 MOTOR Suitable cement concrete foundation duly plastered with anti vibration pads.
1
1662443
1662443.34
... More
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.
-
-
262340.43
... More
Providing, installation, testing & commissioning of water curtain nozzle 15mm dia nickel chrome plated brass, BSPT, K- factor as per design consideration complete as required.
40
719
28790.8
... More
Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi -rigid, inorganic, non- ombustible fibre glass wool insulation 50 mm thick, 65 conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non- woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm /sqm, made of andomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete.
2655
1940
5150753.1
... More
Providing and fixing wooden finish with brown base or as approved, UPVC windows, make Fenesta or similar as per manufacturer's specifications made by extrusion and fabrication. Outer frame of high impact modified grade UPVC of 65 x 58 mm (outer frame 2 or 3-track slider type) and 118 x 58 mm (outer frame 3 track slider) and Sash of 45 x 90 mm, wall thickness of profile must be minimum 1.8 + 0.3 mm. Profile must be colour fast and conforming to standard EN-12608, with GI 18 reinforcement of 120 gsm zink coated. Window shall be fit for wind load as per IS: 875-III. UPVC windows shall be fabricated fusion welded corners with all non-SS fittings. Window panes shall be fitted with double layer glass (SAINT GOBAIN/ASAHI) with cavity filled with inert gas and weather seal (EPDM/TPE) and Stainless Steel (S.S) mosquito net. Material shall be with 10 years manufacturer's warranty for profile and 1 year on hard ware from date of installation. Rate also includes all material, labour, transportation, lead and lift, grouting of back side of profile etc. complete in all respect as per the instructions of Site Engineer. (Item to be used for 2/3/4 track windows as per detail design)
1710
15982
27330673.5
... More
Supplying & fixing 600 mm (24") to 750 mm (2'- 6") long screwed G.I. C class pipe with 3 mm thick M.S. bar flange (plate) welded on it: Flanges should be of Table E of approved make. (Puddle Flange) a) 65 mm(2 1/2")dia pipe 5 mm thick with 150X 150(6" X 6") plate, Both ends Flanged
25
3038
75964
... More
Supplying & fixing SS Curtain rod end support more than 25mm dia including labour, tools, plants, machinery etc.complete with all lead & lift.
373
669
249656.36
... More
Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
212
184
39008
... More
Supplying & Fixing 3 mm thick lead flashing in single piece of lead sheet all around the rain water outlet mouth on a layer of cold bitmen including heavy duty 5 mm thick C.I. grating, a) 150 x 150 (6" x 6") square or dia outlet for 100 mm (4") pipe
10
593
5936
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:a. Structural analysis & design and preparation of shop 64 drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum- smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including.b. Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ asonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.c. Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.d. Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.e. Making provision for drainage of oisture/water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental chargesincluding wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in- charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. a l l complete a s required, as per the Architectural drawings, as per item description,as specified, as per the approved shop drawings and as directed by the Engineer- in- Charge.Note : The performance test will be conducted by NABL approved lab mentioned in section V of work requirement.
2655
3153
8372542.5
... More
Supply of Indoor Optical Fibre cable, 6 core, Low Smoke Zero Hazard (LSZH) grade. Systemax or Molex or Beldon or similar.
2000
26
52900
... More
Supplying all materials including wires, multiple loading/ unloading, storing, handling, fixing, laying, wiring and testing of one light, ceiling/ exhaust/ bracket fan/call bell on Angular/vertical holder/PVC blocks in capping casing starting from the switch board to the point terminated in ceiling rose with earth connection as detailed below, flush type MS Boxes of required modules, electronic fan regulator/ bell (Supply cost of fan regulator/ bell is not covered in this item but erection & commissioning on switch board is included), together with wiring accessories such as 6A modular 1 flush type switches in manufacturer's boxes of suitable sizes with wrap around front plates, modular door bell push button near entrance in separate flash type MS boxes including circuit wiring with 2 x 2.5 sq.mm 1100 volts grade PVC insulated unsheathed multi strand copper conductor single core flame retardant (FLRS) class 2 cable along with one run of 2.5 sq.mm PVC insulated (green colour) stranded FLRS class 2 earth wire complete as per IS: 694/ IS 3043 with latest amended with earthing of fixtures, sockets, ceiling roses and boxes PVC bushes for conduits ends, screws, complete in all respects as per standard specifications. The phase & Neutral wires may be terminated in a ceiling rose near the location of fan/ fitting.
-
-
9200345
... More
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 175 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
100
730
73025
... More
Supply and fixing of 32mm x 20mm PVC Casing caping.
-
-
4
... More
Supplying and fixing Exposed part kit of single lever basin mixer wall mounted 9 consisting of operating lever,wall flange,nipple, and spout with flow restrictor 6.0 LPM at 3 bar pressure (suitable for item ALD-233 & ALD-235 make- Jaquar, model ARI-39233NK or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In- charge etc. complete in all respect.
245
4335
1062202.4
... More
Supplying and fixing angular stop cock with wall flange make- Jaquar, model ARI-39053 or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect.
245
1257
308151.2
... More
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and 9 hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate,gasket etc of follwing sizes as required.
-
-
98986.26
... More
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required:
-
-
638718.11
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in 7 height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
2
18732
37465.34
... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
5
1587
7937
... More
Supply & Fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess as required.
-
-
5
... More
Supplying, Drilling / Cleaning hole and injecting chemical.Application to be designed separately for Rebars as Simply Supported,Moment or Splice Connection as per EC2/TR023 or relevant tested and accepted rebar guidelines.The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion.Drilling hole with double flute type drill bits or hollow drill bits to the 27 required depth by rotary hammer drill,cleaning with brush and jet of clean air,filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDEA22 battery dispenser along with piston plug.The installation and the setting instructions should be strictly followed as per the manufacturer's recommendations.The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/design engineer for approval.Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -8mm dia 160mm depth
100
293
29342
... More
Providing and fixing Polyethelene-Aluminium- Polyethelene PE-ALPE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for 6 hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge. INTERNAL WORK - EXPOSED ON WALL.
-
-
3411070.77
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be 28 specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.
1320
1181
1559632.8
... More
Supply & Fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess as required.
-
-
439647.3
... More
Supplying and fixing Aquamax exposed part kit of thermostatic shower mixer plate for 15 2 way diverter suitable for ALD-681 make- Jaquar, model ARI-39681K or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect.
245
3574
875830.9
... More
Supplying & Fixing & Testing Pressure reducing Valve of Diaphram type & inbuilt SS strainer type with necessary connectors.a) 75 mm (3") dia.
1
35151
35151.2
... More
Providing, installation, testing and commissioning of non- return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc. as required:
-
-
277675.66
... More
Excavation work by mechanical means (Hydraulic excavator)/ manual means in 6 foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.
-
-
815973.18
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural 84 drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement :4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :
-
-
1565858.61
... More
Providing Cement plaster 12 mm thick over masonry walls/ concrete surfaces in all position in single coat in 1:4 mix of cement mortar with Ready Mix Mortar including a thin coat of finely ground pure fat lime putty including finishing smooth etc. complete with all contractor's material, labours, tools & plants, scaffolding, water, consumables etc. complete with all lead and lift. The rate includes cost of ready mix mortar, cement, natural sand, Chickenmesh , labour, tools and 5 plants, scaffoldings, curing etc. complete with all lead and lift. NOTE:-1.Ready mix plaster material of approved brand available in market manufactured with well graded & high quality river sand along with approved brand of cement, water soluble additives and fiber shall be used for plaster.2.Mechanical mixture shall be used for mixing water in ready mix plaster. 3.In exceptional circumstances with prior approval of Engineer in charge, if site mix cement mortar with natural river sand is used for plaster in place of ready mix material, payment will be made at 75% of accepted rate of this item. i.e. rate will be reduced by 25% .4. Only natural river sand shall be used for plaster.
27288.9
392
10697248.8
... More
Supplying, installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required.
-
-
118525.98
... More
Supplying & fixing 600 mm (24") to 750 mm (2'- 6") long screwed G.I. C class pipe with 3 mm thick M.S. bar flange (plate) welded on it: Flanges should be of Table E of approved make. (Puddle Flange) b) 75 mm(3")dia pipe 5 mm thick with 200 X 200 (8" X 8") plate, Both ends Flanged
6
3289
19736.64
... More
Supplying & fixing 600 mm (24") to 750 mm (2'- 6") long screwed G.I. C class pipe with 41 3 mm thick M.S. bar flange (plate) welded on it: Flanges should be of Table E of approved make. (Puddle Flange) c) 100 mm (4")dia pipe 5 mm thick with 250 X 250 (10" X 10") plate, Both ends Flanged
6
3978
23869.44
... More
Supply & Installation of ISI Mark 6/16A Switch Socket in Weather Proof Box.
-
-
11
... More
Providing and erecting 2.00 metre high or as required temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 36 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40 x 40 x 6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer- in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during. construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineerin- Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work).
1293
1527
1974798.9
... More
Supply & Installation of Bonding clamp for interconnecting 10 mm Round Conductor with reinforcement rebar at every 3Mtr inside the concrete to meet the requirements of IS/IEC 62305.
275
669
184057.5
... More
6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
500
43
21850
... More
Supply & Installation of 10 mm copper bonded Solid Steel Round Conductor with 1 minimum coating thickness 70m as integrated down conductor. Material should be tested Tensile strength, Electrical Resistance, salt mist, Bend & Adhesion to meet the requirements of IS/ IEC 62305 and IEC 62561-1&2.
825
845
697331.25
... More
Providing, installation, testing & commissioning of electric release trim assembly for deluge wall with two way solelnoid valve, weather proof operation on 24 volts DC supply complete as required.
2
7566
15132.76
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium 69 alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum omposite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
300
4505
1351512
... More
Supply & Fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess as required.
-
-
4023.85
... More
Providing, fixing and testing heavy quality gun metal or brass ball valve with screwed ends 20kgm class on GI or copper pipe lines B(Leader/ZOLOTO make) 25 mm (1") dia
1
1218
1218.56
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
39
1356
52898.82
... More
Supplying & Fixing & Testing Pressure reducing Valve of Diaphram type & inbuilt SS strainer type with pressure gauge necessary connectors. b) 65 mm (2 1/2") dia.
12
23431
281178.24
... More
Supply & Installation of suitable MS cross connector for conductor to meet the requirement for IS/IEC - 62305.
21
338
7100.1
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 470x420 mm bowl depth 178 mm.
-
-
3
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve 12 durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
88448067.44
... More
Supplying and fixing Towel rack 600 mm long with lower hanger make- Jaquar, model ACN- 1181S or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect.
245
3218
788625.6
... More
Supplying & fixing 40 mm thick DI heavy Rain water grating over storm water channel of heavy duty. a) 600 x 600 MM(600wide)
200
16892
3378592
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means 5 in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
1519895
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
-
-
175758.98
... More
Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick 40 from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel of 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with :
-
-
2119430.4
... More
Supplying & erecting solenoid valve with low & high float switches for over head tank domestic and flushing as per drawing with control panel
3
61128
183385.05
... More
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting 79 mechanically by using needle and surface vibrators, levelling to required slope/ camber,finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).
-
-
2731725.2
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type A) with blank Gunmetal/Stainless Steel cap and chain as required:
-
-
253684.16
... More
Supplying and erecting ISI mark modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete.
212
157
33400.6
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge
50
3190
159505
... More
4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
300
129
38985
... More
Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof.
-
-
7523799
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required:
-
-
361577.48
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
-
-
2181171.3
... More
Do with broken China mosaic flooring instead of IPS set in cement mortar (1:4) 40 mm thick.
664
1588
1054538.24
... More
Supplying and fixing Single lever sink mixer with swinging spout on upper side (wall 24 mounted model) with connecting legs, wall flanges and flow restrictor 6.0 LPM at 3.0 bar pressure make- Jaquar, model ARI-39165 or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect.
49
4818
236093.76
... More
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources. Per bag of
100
445
44534
... More
Supplying, Installing, testing and commissioning CI butterfly valves (PN 16) slim seal standared lever operated type confirming to IS 13039with required flanges, nuts, bolts etc. complete.- 150 mm dia.
1
9733
9733.92
... More
Supplying & Fixing & Testing Pressure reducing Valve of Diaphram type & inbuilt SS strainer type with pressure gauge necessary connectors. f) PROVIDING & FIXING 25MM PRESSURE REDUCING VALVE ON DOWN TAKE WATER SUPPLY
1
5498
5498.08
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve 11 durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
5658132.8
... More
Supplying, installing, testing and commissioning push button station complete as per EIC & specification Electric spring return enclosed push button NO,NC, polycobonate Red/Green I/O IP66 with control panel & cabling from push button to control panel.
1
317221
317221.34
... More
Supplying & laying (including excavation) 25 cm Dia half round RCC Hume pipe of 4 standard thickness at required depth up to 90 cms. below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).
50
626
31337.5
... More
Supplying, Drilling / Cleaning hole and injecting chemical.Application to be designed separately for Rebars as Simply Supported,Moment or Splice Connection as per EC2/TR023 or relevant tested and accepted rebar guidelines.The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion.Drilling hole with double flute type drill bits or hollow drill bits to the 29 required depth by rotary hammer drill,cleaning with brush and jet of clean air,filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDEA22 battery dispenser along with piston plug.The installation and the setting instructions should be strictly followed as per the manufacturer's recommendations.The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/design engineer for approval.Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -12mm dia 240mm depth.
100
653
65326
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :
-
-
327180.36
... More
Supply, placing, fixing, erection/ laying of following Sizes heavy duty GI pipe confirming to IS: 1239 or latest amended below/ above the ground.
-
-
557520
... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :
-
-
694384
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
47491
140
6657763.29
... More
Supply, installation, testing and commissioning of LVDB of size 340 X 230 mm X 90 5 mm,Enclosure with Cable Knock outs Place for ONT or Modem with Fiber Splice Tray , Fiber Clamp Fixed ONT Bracket Power Module 5 Port Patch Panel for Internal UTP cable Termination in 16SWG M.S powder coated with hinged door with space provision for mounting of TTB,TV Splitter and internet data port.
48
5885
282513.6
... More
Providing & fixing D.I. Manhole covers with frames / rings for R.C.C., underground water storage tanks/Over Head tank, sizes of covers. (600mm dia.) NOTE:-should be provided with locking arrangement
14
6308
88325.44
... More
Providing and fixing S. S. (304 grade) kitchen trolleys 450 to 750mm deep and height 1 approximately 750mm, made of 3 and 5m wire for baskets, 19 x 19 mm SS frame, soft close sliding channels, 18mm ply facia with 1mm lamination on both side, profile handles with all labour, material, consumables etc. complete in all respect up to satisfaction of site engineer.
181
36496
6605899.08
... More
Providing, fixing and testing heavy quality gun metal or brass ball valve with screwed ends 20kgm class on GI or copper pipe lines (Leader/ZOLOTO make) 50 mm (2") dia.
16
3614
57827.84
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required:
-
-
27
... More
Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.
1370
143
196855.3
... More
Supply and concealed fixing of 25 mm PVC conduit Pipe (ISI marked). The work includes supply and installation of suitable straight joints, elbows/flexible PVC pipes as per site requirement.
3000
83
251850
... More
Providing and applying plastic emulsion paint in interior of building of approved brand, 8 colour and shade to surfaces in minimum two or more coats, if require to give smooth surface inclusive of scaffolding, preparing to surfaces including priming coat with all lead & lift etc. complete. As directed by engineer. The rates includes cost of all materials, labour, T & P, lead, lift etc. complete.
47491
212
10106084.8
... More
Providing and Fixing Processed Stone Cladding on wall surface/plywood surface. RCC 26 pardi/Wall and all type of Interior ,Exterior Compound wall and Gate etc.of cladding processed stone with material of Processed clay,Wooden chips, Silica sand,Cement,GFRC admixtures,Colour pigments,Fiber upto thick of 230mm/25mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge)
100
10382
1038209
... More
Laying of Indoor Optical Fibre cable, 6 core, Low Smoke Zero Hazard (LSZH) grade. Laying of cable through conduit pipe.
2000
21
43700
... More
Supplying & fixing 600 mm (24") to 750 mm (2'- 6") long screwed G.I. C class pipe with 43 3 mm thick M.S. bar flange (plate) welded on it: Flanges should be of Table E of approved make. (Puddle Flange) e) 200 mm (8") dia pipe 7 mm thick with 350 X 350 (14" X 14") plate, Both ends Flanged
1
7758
7758.24
... More
Supplying installing, testing, commissioning of Vertical Inline Centrifugal type pump, of 180 LPM is 150metre Head coupled with Suitable HP Main Fire pump Jockey & Main Sprinkler Jockey 30 Pump.motor rating M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Pumps shall be Factory Acceptance Test. Pump shall be capable of delivering 150% of the rated capacity IE3 MOTOR Suitable cement concrete foundation duly plastered with anti vibration pads.
2
296864
593729.76
... More
Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- 66 Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*)."(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc.The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
2655
2200
5843601.9
... More
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
-
-
148202.78
... More
Supplying, Drilling / Cleaning hole and injecting chemical.Application to be designed separately for Rebars as Simply Supported,Moment or Splice Connection as per EC2/TR023 or relevant tested and accepted rebar guidelines.The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion.Drilling hole with double flute type drill bits or hollow drill bits to the 31 required depth by rotary hammer drill,cleaning with brush and jet of clean air,filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDEA22 battery dispenser along with piston plug.The installation and the setting instructions should be strictly followed as per the manufacturer's recommendations.The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/design engineer for approval.Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -20mm dia 400mm depth.
100
1423
142364
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
-
-
766388.4
... More
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete
-
-
51033.94
... More
Supplying, Drilling / Cleaning hole and injecting chemical.Application to be designed separately for Rebars as Simply Supported,Moment or Splice Connection as per EC2/TR023 or relevant tested and accepted rebar guidelines.The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion.Drilling hole with double flute type drill bits or hollow drill bits to the 33 required depth by rotary hammer drill,cleaning with brush and jet of clean air,filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDEA22 battery dispenser along with piston plug.The installation and the setting instructions should be strictly followed as per the manufacturer's recommendations.The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/design engineer for approval.Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -32mm dia 640mm depth.
50
7534
376740
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: Gun metal Stainless Steel (Grade 304)
-
-
69034.6
... More
Providing & fixing 150 mm SS 304 ACO Kitchen drain chanel including SS 304 grating on top
-
-
59
... More
Providing, fixing and testing heavy quality gun metal or brass ball valve with screwed ends 20kgm class on GI or copper pipe lines (Leader/ZOLOTO make) 32 mm (1 1/4") dia
316
1771
559901.44
... More
Supply & Installation of stainless steel Straight Connector of integrated down conductor and should be tested for electrical resistivity, mechanical load to meet the requirement for IS/IEC - 62305 and IEC 62561-1&2.
6
543
3263.7
... More
Supplying and fixing Opal Prime Bath tub spout with wall flange make- Jaquar, model SPJ- 15429PM or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect..
245
1843
451662.4
... More
Providing and laying autoclaved aerated cement blocks masonry with 21 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in- Charge. (The payment of RCC band and reinforcement shall be made for seperately).
-
-
18452516.48
... More
Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine aggregate (natural sand/crushed sand VSI grade finely washed etc.), compacting and proper embedding/laying of inter 42 locking paver blocks into the fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and complete as per manufacturer psecifications & direction of Engineer- in- Charge. 60mm thick CC paver block of M-35 grade concrete with approved colour and design & pattern.
201
1413
284209.98
... More
Supplying and fixing Concealed Flush Valve Complete with 32mm Size Control Cock & 200mm Long Operating Lever Model FLV-1051 Jaquar or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect.
245
6832
1673840
... More
Supplying and installing, testing, perfect aligning and proper leveling and commissioning of Centrifugal type pump, of2850 LPM is 150metre Head coupled with Suitable HP Main 29 Fire pump & Main Sprinkler split case Pump.motor rating M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Pumps shall be Factory Acceptance Test. Pump shall be capable of delivering 150% of the rated capacity IE3 MOTOR Suitable cement concrete foundation duly plastered with anti vibration pads.
2
1102640
2205281.98
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne 76 capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.
1826
196
359064.64
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in 38 kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete'
100
879
87917
... More
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating 1 the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.
866
129
111887.2
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
298
2115
630341.52
... More
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
200
842
168590
... More
Providing and fixing brass screwed/flanged type mosquito proof grating for under ground suction tank/Over head tank, over flow and vent of the following diameters. 50mm dia a) 50 mm (2") dia.
14
1024
14347.2
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 15 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With Sewer bricks conforming to IS : 4885
5
11419
57095.35
... More
Supplying and fixing Shower arm casted 190 mm Long flat shape for wall mounted showers with flange make- Jaquar, model SHA-483 or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect.
245
1184
290315.2
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming 16 to IS 3589/1S 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required:
-
-
5969879.11
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB 7 complete with connections, testing and commissioning etc. as required.Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
496696.5
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by 31 manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
-
-
1838518.88
... More
Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.
-
-
48
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
-
-
2108894.6
... More
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment 2 by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper.
334
135
45170.16
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :
-
-
9580.14
... More
Melamine polishing on wood work (one or more coat).
-
-
45
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
423148.25
... More
Providing & Laying HINDUSTAN paving Tiles on Road of Vindhya Floor tiles having abrasion/wear resistance & wet Transverse strength, size 355mm x 355mm x 25mm thick fixing on cement mortar 1:4 in any colour & pattern as directed by Architect etc complete.
1855
1645
3051994.4
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 25 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
-
-
2153679.95
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
530805.52
... More
Supplying & Fixing & Testing Pressure reducing Valve of Diaphram type & inbuilt SS strainer type with pressure gauge necessary connectors. d) PROVIDING & FIXING 40MM PRESSURE REDUCING VALVE ON DOWN TAKE WATER SUPPLY PIPES (Diaphram type with inbuilt ss strainer)
22
8529
187658.24
... More
Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts,nuts, rubber insertions etc. (The tail pieces if required will be paid separately) :
-
-
3258.74
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required:
-
-
270830
... More
Supplying, Drilling / Cleaning hole and injecting chemical.Application to be designed separately for Rebars as Simply Supported,Moment or Splice Connection as per EC2/TR023 or relevant tested and accepted rebar guidelines.The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion.Drilling hole with double flute type drill bits or hollow drill bits to the 32 required depth by rotary hammer drill,cleaning with brush and jet of clean air,filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDEA22 battery dispenser along with piston plug.The installation and the setting instructions should be strictly followed as per the manufacturer's recommendations.The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/design engineer for approval.Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -25mm dia 500mm depth
50
3966
198332
... More
Supplying and erecting modular pop up Box 8 module erected with provided AV/ HDMI , RJ 45,6 A electrical sockets and switch on provided table.
1
4305
4305.6
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever 61 required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & Stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (Hand rail in staircase)
4176
693
2897517.6
... More
Providing and fixing of customized Aluminium form work for monolithic construction on RCC members with repetitive usage made up of aluninium sheets/plates of minimum 4mm thickness and grade 6061 (Type-6). The formwork comprises of (a) wall panel, roccker, kickerand internal soffit 17 corner, external soffit corner, external corner, internal corner etc., (b) beam components i.e, beam side panel prop head for soffit beam, beams soffit panel, beam soffit bulk head and (c) deck components i.e. deck panel, deck prop, prop length, deck mid, soffit length, deck beam bar. The panels are held in position by a simple pin and wedge system that passes thorugh holes in the out side rib of each panel. The tolerance of finished panel shall not be less than (-1 mm) and shall conform to IS 14987-1999. Pins and wedges to be made of high grade hot dipped galvansied mild steel. This form work also comprises of M.S. angle iron, "Z" shaped brackets braced diagonally at 0.90 to 1.00 mtr. centre to centre on extrenal wall face just the level below on which to lay M.S. square tube panels (Challis) and guard railing supports to form working platform and 40 mm dia G.I. telescopic adjustable props to support deck formworkand beam soffit panels including de-shuttering the formwork from odd/even level to be shifted/lifted to next alterante odd/even level before which the points and shuttering surface to be thoroughly cleaned, pins greasing and shuttering surface oiling propoerly beforefixing all complete including sealing of gap between kicker plates of wall panel and floors (if any) as per design of formwork as provided by shuttering supplier and as per direction of the Engineer-in-charge including filling and finishing the holes of varied sizes and shapes (left by keys/pins of aluminium form work shuttering while deshuttering) with GP-2 cementeous polymer compound mixed with water in ratio prescribed by manufacturer to form consistent workable dough for pushing it in the holes upto full depth of wall using appropriate tools and finishing smooth all complete as per directions of the Engineer-in-charge.
58500
405
23718825
... More
Providing, fixing and testing heavy quality gun metal or brass ball valve with screwed ends 20kgm class on GI or copper pipe lines (Leader/ZOLOTO make) 40 mm (1 1/2") dia.
10
2736
27361.6
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post 24 office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
-
-
343609.62
... More
Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer- in-Charge.
-
-
18922.4
... More
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) :
-
-
55584.38
... More
Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete
1547
2532
3917205.11
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by 24 the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Antiskid/Glazed)
-
-
19864918.61
... More
Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern 29 wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.
-
-
3152860.79
... More
Supplying and fixing Double coat hook make- Jaquar, model AKP-35761P or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In- charge etc. complete in all respect.
245
878
215129.6
... More
Providing and fixing undercounter rectanguar CNS-WHT-701 wash basin with C.I. 7 brackets, 15 mm dia C P Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.
49
7896
386904
... More
One 6 amps 5 pin universal socket with safety shutter outlet controlled by one 6 amps 2 switch. Wiring shall be with 2x2.5 + 1x2.5 sq.mm. 1100 volts grade PVC insulated unsheathed multi strand copper conductor single core flame retardant (FRLS) class 2 cable as per IS: 694/ IS 3043 with latest amended. If 6 amps 5 pin universal socket with safety shutter is located on same switch board, then it will be considered as half point.
-
-
1737621.25
... More
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge
-
-
979426.08
... More
Supplying and filling in plinth with sand under floors,including watering,ramming,consolidating and dressing complete.
1038
1907
1980275.64
... More
Supply and installation of MS Tray 150X50X2 mm
-
-
3
... More
Supplying and installing cast iron Butterfly valves PN 16 completewith both sides including flanges on receiving pipes with nuts, bolts,1.5mm thick compressed asbestos gasket insertion as required.80 mm dia.
8
5316
42533.12
... More
CONTROL PANELS Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated o f approved shade after 7 tank treatment process, cable alley, interconnection for fault indication, complete as per specificationPanel shall be Factory Acceptance Test. with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : Incomings 400A, 50kA 4 Pole MCCB, Ics=100% Icu Rating Digital Voltmeter 0-500V with selector switch Ammeter (0-400 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 500 Amps Outgoings ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) Main 2 Fire Pump 200 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 100 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation,selector switch for local/remote, auto/manual/OFF operation. -2 setsJockey Pump100 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets DIESEL ENGINE CONTROLControl for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual modeIndicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC AmmeterAll standard relays and accessories for automatic operation of diesel engineSystem ControllerDesigning, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting o f relays, timers. Sensors, annunciation window.
1
591131
591131.82
... More
Supplying and fixing Overhead shower 140mm dia round shape single flow with rubit cleaning sstem and flow restrictor 6.0 LPM at 3 bar pressure make- Jaquar, model EOHS-1757 or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect.
245
3599
881806.45
... More
Supplying and fixing angular stop cock with wall flange make- Jaquar, model ARI-39053 or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect.
245
1257
308151.2
... More
Supply & Fixing of Following way, horizontal Type three pole and neutral, sheet steel, 2 MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
901405.65
... More
Providing and applying plaster with plaster of paris punning in 4 mm to 6 mm thickness to any surface in all position including preparing the surface scaffolding etc. complete. (For ceiling)
11881
165
1967493.6
... More
Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre.
988
39
39193.96
... More
Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineerin- charge
50
1030
51526.5
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test."All above operations to be done in order and as directed and specified by the Engineer- in-Charge :
-
-
917053.74
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (116 cement : 3 coarse sand) finished with floating coat of neat cement and making hannels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With Sewer bricks conforming to IS : 4885
1
29392
29392.09
... More
Providing&fixing Potable SS Grease separator Trap of Aco make model FSS50,Part.No.402614 size 600x520x440 of 2 L/S flow.
1
50003
50003.52
... More
Providing coating of Bitumen Paint & 4mm thick Wrapping as per IS 10221 for underground 150 mm Ring Main of Fire Fighting System.
421
396
167031.75
... More
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the 67 approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in- Charge.
1283
3298
4231500.79
... More
Fire Door 55mm 2HR FRL (120/120)3 Criteria INTEGRITY/INSULATION/STABILITY WOODEN DOOR - Fire Door Tested in accordance to IS: 3614 Part 2. Providing of 120 min Fire rated doors system duly tested for 3 criteria Integrity ,Insulation and Stability Criteria as per the IS :3614 16 Part 2 and BS:476 part 22 at National Test House, Govt of India laborator and/or with Central Building Research Institute,Govt of India undertaking with standard heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20 & 22 1987 to achieve the required integrity,insulation and stability (i.e.to restrict the heat radiation,temperaturer is eonthe non fire side to the maximum of 140°C above the ambient temperature on the exposed surface of the shutter.The fire doors are tested with NCBN technology ("Non Combustible by Nature")
-
-
6448485.83
... More
Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE 38 connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.
3
9486
28459.05
... More
Supplying and fixing Bottle trap (with internal partition) 32mm size with 300 mm and 11 190 mm long wall connection pipes and wall flange make- Jaquar, model ALD-769L 300x190 or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In- charge etc. complete in all respect.
245
2013
493371.2
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
1000
41
41400
... More
Laying, termination, testing and upto commissioning of 4 pair Unshielded twisted pair 23Awg Low Smoke Zero Hazard (LSZH) CAT -6 Cable. Laying through casing caping/ conduit pipe.
8.05
10000
80500
... More
Carting away excavated surplus earth upto approved municipal dumping ground as per the NOC including loading, unloading spreading etc. complete ( Beyond 33 Km)
1749
743
1301203.53
... More
4.00 mm dia copper wire on surface or in recess for loop earthing as required.
-
-
2
... More
Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator 70 machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
500
671
335875
... More
BOOSTER PUMP(A) Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)(B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS: 1520 (C) Suitable HP 1 squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS- 325.(D) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (E) Suitable cement concrete foundation duly plastered and with anti vibration pads.Pumps shall be Factory Acceptance Test. 900 lpm at 35 m Head.
2
104587
209174.72
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.
-
-
117241.59
... More
Supplying and fixing 450 mm long braided hose with two 15mm nuts and rubber 21 washers without nipple (Suitable for Geysers) jaquar make ALD-805B or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect.
245
404
99058.4
... More
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complet
862
896
773058.84
... More
Supplying and fixing ISI grade approved 9/10 Liters capacity galvanised round fire bucket painted Red and lettered 'FIRE' on each bucket. The cost include for bracket/rod to hang the bucket on a wall or pillar or on stand (3 Nos. buckets in each stand) as per IS: 2546 with latest amendment. (Supply)
4
254
1016.6
... More
Supply and fixing hand held fire extinguisher (Co2) gas type 5/6 Kg capacity complete w ith refill, full length back bracket, hose and clip mounted on wall with suitable mounting arrangement as per IS: 2878 with latest amendment at the time of inspection. (Supply)
3
2465
7396.8
... More
Supplying & fixing 40 mm thick DI heavy Rain water grating over storm water channel of heavy duty. a) 600 x 450 MM(450wide)
150
13106
1965936
... More
Payment for ensuring Implementation and monitoring of all provisions in safety,Health and Environmental manual (SHE Manual) of MRVC during execution of works through entire contract period including deployment of required SHE organization as mentioned in SHE Manual with required qualiofication,arranging training to all workers and staff engaged for work, Regular health check ups of labours, arranging SHE meetings. SHE inspections, SHE audit, SHE communication i.e Posters/ Signage/ Video/ Audi, SHE housekeeping, safety training, provision of protective wear, labour welfare measures, environmental management, traffic management of vehicles for construction activities, etc complete as detailed in SHE manual. Notes: 1.Rate for this item is to be quoted as percentage of total 1 cost of civil engineering work,(Schedule A to C). For example, total cost of civil work and schedule a is 100 million and rate quoted by the tender is one person then total payment under this item will be 1 million. payment against this item will be made at quoted percentage of the value of work done and billed in each interm payment certificate/ on account bill. 2.Separate SHE organisation/team shall be deployed. 3.Penalty will be imposed for failure or violations in implementation of SHE manual provisions as mentioned in the part V of SHE manual. 4. Persistent failure or violation of SHE manual provisions may attract termination of contract. 5.Payment will be released with each on account bill as per percentage quoted by the contractor for this item after recovering penalties imposed for violation of provision of manual, if any. 6.During non-progress of work, no payment will be made under this item. 7. No extrta payment will be made for ambient air-quality monitoring, noise level monitoring analysis of drinking water and analysis of soil sample under relevant items.
-
-
8388482.54
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating 14 brick masonry chamber with water tight C.I. cover with frame of 450 x450 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70kg as per standard design:100x100 mm size P type With sewer bricks conforming to IS : 4885
2
2496
4993.96
... More
Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete. (excluding primer coat).
500
107
53735
... More
Supplying & fixing SS Curtain rod mid support more than 25mm dia including labour, tools, plants, machinery etc.complete with all lead & lift.
373
202
75625.75
... More
Supply & Installation of stainless steel Earth stud with corner plate integrated inside 9 concrete and placed in corner edges to avoid side flash and should be tested for electrical resistivity, salt spray and huminity test & short circuit to meet the requirements of IS/IEC 62305 and IEC 62561- 1&2.5.
12
4207
50494.2
... More
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of 15 stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.
-
-
1493484.12
... More
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
-
-
34
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other 39 end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
6441578.88
... More
Sewage Treatment Plant 75kld MBR type for Residential - Design, supplying, installing, testing & commissioning of Sewage Treatment Plant for the following duty: Nature of effluent - 68 Domestic Sewage Daily average flow - 5 Cum / hr. pH - 6.0 - 8.5 BOD at 27 Deg C - 100 - 450 mg/L T.S.S.- 200 - 450 mg/L COD - 300 - 600 mg/L 2 nos. Sewage lift pump 3m3/hr 2 nos. Twin lobe Air blower 60m3/hr Membrane porosities of 0.035 microns: GE/Siemens Plantroom Sump Platform and foundation for tanks and equipment Ladder, Cat work, Inserts, flanges, manhole cover etc. Electrical Panel & Cabling. Common plant room adjacent to STP. Two years DLP including
1
8458842
8458842.11
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
69023.25
... More
Supply & Fixing 5A to 32A rating, 240/415V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB as required.
-
-
1016133.1
... More
Supply and fixing 1600x1500mm size best quality mirror of Modi make of thk. 6mm. With copper backing fixed to 8mm thk. Plywood sheet CP hooks, CP screws etc. complete.
70.2
3221
226122.62
... More
Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
420
1668
700883.4
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm 1 sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
49
6079
297879.82
... More
Installation of Exothermic Welding - Including welding mould and other accessories for welding confirms the requirements of IEEE 837:2014 : T-Joint, X-Joint, L-Joint , Straight joint.
14
7725
108159.8
... More
Providing and fixing sliding wardrobe shutters made of 19 mm pine block board with 6 1mm thick laminate on both side with all labour,accessories, consumables,transport etc. complete in all respect up to satisfaction of site engineer. Rate includes Aluminium Powder coated sliding tracks suitable for shutter and profile handles.
737
6183
4557497.45
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20 mm diameter round bar
20
446
8920.2
... More
Supply & Installation of ISI Mark 25 A Modular switch.
-
-
9
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work External Tapoff to terrace over head tank & Terrace.
-
-
578335
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S.Flat 15x3 mm and nuts & bolts complete.
-
-
173107.6
... More
Extra above NS -29 for providing laminated glass ( 5+1.12+5) instead of 12 mm toughened glass.
1740
2016
3507840
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar 36 locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red
-
-
26948184.11
... More
Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, 33 hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)
39
18268
712487.1
... More
Supplying and fixing bath tub make- Jaquar, model JBT-WHT-FSBT177542X or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In- charge etc. complete in all respect.
1
100047
100047.36
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
8397
15
132840.54
... More
Providing and supplying aluminium extruded tubular and other aluminium sections as 68 per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. Aluminium Fins
22187
372
8257335.79
... More
Supplying, Drilling / Cleaning hole and injecting chemical.Application to be designed separately for Rebars as Simply Supported,Moment or Splice Connection as per EC2/TR023 or relevant tested and accepted rebar guidelines.The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion.Drilling hole with double flute type drill bits or hollow drill bits to the 28 required depth by rotary hammer drill,cleaning with brush and jet of clean air,filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDEA22 battery dispenser along with piston plug.The installation and the setting instructions should be strictly followed as per the manufacturer's recommendations.The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/design engineer for approval.Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -10mm dia 200mm depth.
100
526
52647
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
24220000
... More
Supply & Installation of ISI Mark 3 pin 25 A socket outlet
-
-
10
... More
6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
-
-
1
... More
Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 :
-
-
26805.4
... More
Supplying & Fixing & Testing Pressure reducing Valve of Diaphram type & inbuilt SS strainer type with pressure gauge necessary connectors. c) 50 mm (2") dia.
-
-
49
... More
Supplying and fixing Soap dispenser with glass bottle make- Jaquar, model ACN-1135N or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect.
245
828
203056
... More
Providing & Fixing 100mm diameter Nahani trap Jali in steel finish with necessary fixing required to make the item well functional.
1144
489
559919.36
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, 62 mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
-
-
164084.5
... More
Laying, spreading and compacting stone aggregate of specified sizes to WBM 78 specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density (WBM Grading - I Using Screening - Type A)
274
940
257694.26
... More
Extra for providing and mixing hardening compound of approved quality as per manufacturer's specification in cement concrete.
183
49
9122.55
... More
Making connection of drain or sewer line with existing manhole including breaking into 19 and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
-
-
728.03
... More
Providing and fixing Polyethelene-Aluminium- Polyethelene PE-ALPE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for 5 hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc.
-
-
3515998.2
... More
Supplying and fixing Aquamax internal part kit of thermostatic shower mixer with 2 way diverter make- Jaquar, model ALD-681 or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect.
245
11710
2869123.95
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
500
378
189175
... More
Providing and fixing 600x120x5 mm OR as per design glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete
36
13085
471075.12
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
169740.9
... More
Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF- FFA/PG
9
887
7990.2
... More
Providing Sills/Slab of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete
500
1308
654465
... More
Providing and fixing ball bearing for rolling shutters.
-
-
63
... More
Supplying and fixing Waste coupling 32 mm size full thread with 130 mm height make- Jaquar, model ALD-705 or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect.
245
647
158603.2
... More
Supplying and installing cast iron Butterfly valves PN 16 completewith both sides including flanges on receiving pipes with nuts, bolts,1.5mm thick compressed asbestos gasket insertion as required.65 mm dia
-
-
34
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
4200
176
739494
... More
Providing, fixing and testing heavy quality gun metal or brass ball valve with screwed ends 20kgm class on GI or copper pipe lines (Leader/ZOLOTO make) 15 mm (1/2") dia
2
708
1417.92
... More
Supplying and fixing Toilet Roll Holder AKP 35751P jaquar make or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect.
245
1305
319950.4
... More
Supplying and fixing Rimless, Blind Installation wall hung WC with UF soft close slim 1 seat cover, hinges,accessories set make- Jaquar, model SLS-WHT-6953BIUFSM or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In- charge etc. complete in all respect..
196
13000
2548188.16
... More
Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and 53 fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
-
-
2102990.16
... More
Flushing Water Supply Pumps for residential zone No. o f Pumps: 3 nos. (2 W + 1 S) Capacity: 30m3/hr of Each Pump Head: 110 Meters Air Vessel: 100 Ltr tank Note: 1 set consists o f 3 nos. of pumps (2 Working + 1Standby)
1
2272157
2272157.34
... More
Providing and fixing HDPE pipes complete with HDPE fittings with EN 12056 in 57 conjunction with DIN 1986-100 and EN 752,Linear expansion: 0.17 mm/m*K. Temperature resistance: up to 80 °C, short-term 100 °C. Building material class: DIN 4102-B2, normally inflammable complete in all respect. ( )
-
-
21661908.12
... More
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to 17 IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding. excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.
-
-
1644375.48
... More
Providing & fixing of CI wafer type butterfly valve (suitable for testpressure of 15 kg / sqm) with flanges, nut bolts, gaskets and necessarypad locking arrangement complete required. - 200 mm dia
1
22958
22958.88
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating 13 brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70kg a s p e r standard design:100x100 mm size P type With sewer bricks conforming to IS : 4885
1
2435
2435.93
... More
Supplying & Fixing 3 mm thick lead flashing in single piece of lead sheet all around the rain water outlet mouth on a layer of cold bitmen including heavy duty 5 mm thick C.I. grating, c) 300 x 300 (12" x 12") square or dia outlet for 200 mm (8") pipe
1
754
754.88
... More
CONTROL PANELSElectric power/distribution panel /motor control centre for the complete Plumbing Equipment, as per specifications, as follows and as approved. Motor control centre alongwith automatic level controller in U.G &O.H. tank & sump pump shall comprise the following :a) Probe in water tank with suitable electrical connection for operation with starter and with suitable change over arrangements to motivate either of the two domestic pumps,b) Indicator panel in the 73 pump room for the water level at U.G.tank.c) Control circuit suitable for low voltage drive through control transformer 240 V.d) High and low level probes of approved make for preventing dry running of pumps (SS. Probes).e) Auto manual starter switch to all sets. with solenoid valve for on & off with control cabling etc f) Control wiring 3 x 2.5sq.mm from probes to control and indicator unit to the motor starter at the pump room as required.g) Auxillary contacts for indicator lamps, level switches, pump changeover facility, dry run presenter switch, selector switches for ON/OFF/AUTO operation Note:- Contractor shall submit GS, SLD and Schematic drawings for approval of the consultants before fabricating the panel.panel shall be Factory Acceptance Test.PLUMBING PANEL:Incoming: 1 No.125, TP+N ACB, 1 Set Indicating Lamps, R,Y,B., 1 No.Ammeter with Selector Switch, 3 Nos. CTs of ratio 125 A/5A, CL1, 15 VA.Busbars: 320A TPN Copper (minimum rating)COutgoings: 0Nos 320A TPN MCB, 0Nos 250A TPN MCB, 0Nos 160A TPN MCB, 1Nos100A TPN MCB, 3Nos 80A TPN MCB, 2 Nos 63 ATPN MCB, 1 Nos 40 ATPN MCB
1
279143
279143.44
... More
Supply, multiple loading/ unloading, storing, installation, fixing, testing & 10 commissioning of factory built (OEM) and assembled following capacity 4P C curve 10 kA breaking MCB in SS enclosure including all accessories/ GI nut, bolt, hardware, material/painted MS angle, channel/ bracket, HD PVC/ Flexible pipe, etc. required for fixing/ installation the cost of which is included in the item.
-
-
423117.2
... More
Supplying and fixing Wall to wall shower enclosure model CHR- 120W1216H19X H: 39 1950 W: 1201-1600 mm Wall to wall shower enclosure with one fixed glass and one openable door fixed on wall - 2 parts Glass: 8mm / 10mm Finish: Chrome of Jaquar make or similar reputed brands including all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect.
594
9315
5533335.72
... More
Providing and fixing ISI marked flush door shutters of 35 mm thick conforming to IS : 15 2202 (Part I) non- decorative type, core of block board construction with frame of 1st class hard wood and teakwood ply on both faces including ISI marked Stainless Steel butt hinges with necessary screws.
1353
3199
4329058.8
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
1353
415
561941.49
... More
Supply of CAT -6 Cable, 4 pair Unshielded twisted pair 23Awg, Low Smoke Zero Hazard (LSZH). Systemax or Molex or D-link or similar.
10000
18
184000
... More
Supply and fixing hand held fire extinguishers Dry chemical powder type 5/6 Kg capacity with carbon dioxide cartridges complete with refill, full length back bracket, hose and clip mounted on wall as per IS: 2171 with latest amendment at the time of inspection. (Supply)
33
3484
114988.5
... More
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded 17 stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standarddesign : 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete.(Excavation, foot rests and 12mm thick cement plaster atthe external surface shall be paid for separately) :With Sewer bricks conforming to IS : 4885
1
11319
11319.01
... More
Domestic Water Supply Pumps for residential zone No. of Pumps: 3 nos. (2 W + 1 S) Capacity: 30m3/hr of Each Pump Head: 110 Meters Air Vessel :100 Ltr tank Note: 1 set consists of 3 nos. of pumps (2 Working + 1Standby)
1
2272157
2272157.34
... More
Providing and fixing polycarbonate multiple wall sheet roofing 20mm thick gauge of approved make UV coated of approved make and of approved colour and with aluminium framing for 38 fixing polycarbonate sheet using pressure plates with EPDM gasket (compatible to polycarbonate) breather tape, screws and covering the pressure plates complete and making the entire system water tight by using sealant as per architectural drawings and specification.(Rate does not include cost of structural steel framing which will be paid seperately)
50
6633
331688
... More
Transplantation of trees with in a distance of 2km including excavation around existing tree, pruning of branches, lifting, loading and transportation of existing tree, digging pits for placing tree at new place, adding manure, sand, fertilizer, hormones and bio fertilizer to it. Levelled and 3 neatly dressed and disposal of surplus materials from old existing and new sites to designated place. Each tree should be firmly secured to the stake so as to prevent excessive movement, flooding with water, treatment of roots, rope and gunny bags as per direction of the officer incharge. T&P and all required materials shall be arranged by the contractor and nothing extra shall be paid on this account. (a) Girth of tree shall be measured at a height of 1m above ground level.
-
-
40406.63
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately.
-
-
5008085.16
... More
Supplying and fixing Bib cock with wall flange make- Jaquar, model QQP-7037PM or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect.
52
2380
123760
... More
FIRE SEALANT SYSTEM Supplying and erecting fire resistant mortar (20 kg) with fire 36 resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). The residual openings shall be closed with filler, as per specification no FF- FRM.
100
11000
1100090
... More
Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout 21 mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete)
1033
1615
1668956.12
... More
Supplying ,Providing and Fixing Curtain Rod End Cap with all tools ,materials, consumables, manpower etc all complete.
373
172
64480.51
... More
Providing and fixing undercounter oval wash basin CNS-WHT-705 with C.I. brackets, 15 8 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap
196
5750
1127015.68
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with 2 C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm.
1
6239
6239.27
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
111412000
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 83 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
-
-
402557
... More
Supplying and fixing Hand shower (health faucet) with 8mm dia 1.2 meter long flexible 3 tube and wall hook make- Jaquar, model ALD-573 or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect.
245
1696
415716
... More
Supplying, Drilling / Cleaning hole and injecting chemical.Application to be designed 30 separately for Rebars as Simply Supported,Moment or Splice Connection as per EC2/TR023 or relevant tested and accepted rebar guidelines.The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion.Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill,cleaning with brush and jet of clean air,filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDEA22 battery dispenser along with piston plug.The installation and the setting instructions should be strictly followed as per the manufacturer's recommendations.The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/design engineer for approval.Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -16mm dia 320mm depth.
100
955
95513
... More
Supply & Installation of 10 mm copper bonded Solid Steel Round Conductor with minimum coating thickness 70m as integrated down conductor. Material should be tested Tensile strength, Electrical Resistance, salt mist, Bend & Adhesion to meet the requirements of IS/ IEC 62305 and IEC 62561-1&2.
-
-
5
... More
Providing and painting Nitco Brand or equivalent premium acrylic based textured external application paint system as per manufacturers specifications and paint pattern approved by 9 the Engineer including two or more base coats over external plaster with primer and crackseal etc. The cost of paint is inclusive of scaffolding and any type of location. The process of application is propritory, however manufactures guarantee is required for the durability of textured paint surface. The shade of the paint to be long lasting for prolonged exposure to sun, rain, and wind etc.
22600.8
618
13985375.04
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
-
-
825763.56
... More
Providing and fixing UV resistant selffit UPVC pipes of approved make for Rainwater 64 downtakes confirming to IS 13592:1992 Type A suitable for 4kg/sqcm pressure for following pipe diameters including rain water receiving recess with pvc plug bend necessary fittings such as offsets shoes, fixing the pipes on wall with clips filling the joints with solvent/cement and necessary scafolding etc. complete as directed by Engineer In Charge.
-
-
487356.8
... More
Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.
791
231
182736.82
... More
Supplying and fixing Concealed stop cock with wall flange make- Jaquar, model COP- 083KPM or similar reputed brands with all consumables, fittings, labour, transport etc. as approved by Engineer In-charge etc. complete in all respect
260
9924
2580323.2
... More
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash 47 fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.
-
-
847820.68
... More
Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone 12 black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.
497
5037
2503731.93
... More
Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FMGunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required:
-
-
83492.08
... More
Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. 41 Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self- tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. Multipurpose cement board reinforced with suitable fibre cement screw.
-
-
2509037.1
... More
Supply & Fixing Following way, Single pole and neutral, sheet steel, MCB distribution 1 board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator)
-
-
7924.65
... More
Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all 26 complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge
-
-
1057889.6
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
7232.6
... More
Providing & fixing Safety Net with 2" pipe & clamp to protect the movementat all floors with contractors labour, tools & plants etc. complete as per directions of Engineer in charge. After completion of work it is to be removed for no additional cost.
1000
694
694400
... More
Supply & Installation of 18mm stainless steel Straight Connector of integrated down conductor and should be tested for electrical resistivity, mechanical load to meet the requirement for IS/IEC - 62305 and IEC 62561-1&2.
165
543
89751.75
... More
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.
1730
130
225609.3
... More
Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV
5
862
4312.5
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein
408
618
252323.52
... More
Providing and fixing 36 mm thick Styrene Butadiene Rubber(SBR) with EPDM (Ethylene Propylene Diene Monomer) insitu rubber flooring out of total Thickness of 36 mm the First Layer of 30 mm thick should be of Black SBR Second Layer of 6 mm thick should be with Color EPDM.The above flooring of EPDM should be done with different color grains as per design approved by engineer .and it should be laid Concrete The glue used should be of (1). PU Binder, it's glue which gives bonding to Rubber and should be in Transparent Color, USP of it should have low UV minimal color change EDPM Granules. (2). Butyl Acetate, its again a kind of Glue which gives bond in-between different layers. The quoted should be inclusive of above glue of transportation etc completely required for satisfactory completion of work. Note:- SBR Buffing (Styrene-Butadiene Rubber), it should be in Black Color and should have excellent weather properties (Ethylene Propylene Diene Monomer), should be in Multi Color Options , its should be Synthetic Rubber which should have water resistance, durable, UV stable high & consistent quality product as per the manufacture's specification including necessary Slope,finishing,etc all complete as directed by the Engineer- in-Charge.
-
-
43
... More
63 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB as required.
-
-
286530.55
... More
Clean the Floor slab surface of all loose particles, dust, cement laitance etc. preferably done using machine like device. Inspect for cracks/construction joints. Fill the cracks by Elastoroof PU of approved make & approved by Engineer in charge. Provide and apply a primer coat of Sunprime PU primer of sunanda or equivalent or approved by Engineer in charge on the cleaned RCC slab surface using a soft paint brush. Shake the container well and directly apply the primer by brush. Allow to set for 30 - 45 mins depending on the ambient temperature. After the primer has totally cured and dried, apply Elastoroof PU of approved make & approved by Engineer in charge by brush, roller or airless spray equipment. Apply at a rate of 1 kg/sqm for the first coat evenly over the primer surface and 19 allow to set for 12 hours. After ensuring that the first coat is set and cured, apply the second coat in similar manner at a rate of 0.5 kg/sqm and allow to set. Extend all the three coats continously over side walls upto 90cm heights. While the second coat is has reasonably hardened but still wet and tacky on surface, sprinkle sand over the surface to make it rough so as to provide mechanical key for the protective screed/I.P.S. of 25 MM thick waterproof bedding. Ensure that the sand does not gets embedded in the second coat and remains on the surface. Allow the two coats of Elastoroof PU of approved make & Single Component, Liquid Applied, Polyurethane Membrane should have following minimum properties:(PWD SSR 2021-22 50.05) 1. Specific gravity: 1.30 ± 0.12. Elongation %: >6003. Tack free time: 24-48 hrs4. Tensile strength N/mm2: 2.15. Shore hardness: 40 ± 5 It shall be applied as per manufacturers specification.
1829.52
3885
7107685.2
... More
Drainage and Sewerage Sump Pump Supply, installation, testing and commissioning compact monoblock dry motor sump pumps of suitable rating, with non-clog free flow open impeller, solid handling capacity at least 40 mm suitable for operation on 415 volts +10% , 3 Phase, 50Hz, A.C supply, speed 2900 RPM including oil chamber, guide wire for lifting & lowering of pump, G.I. galvanized lifting chain, complete. The above pump sets must be supplied complete with following accessories. Pumps shall b e Factory Acceptance Test. GI Piping of 80mm dia for individual pump delivery line and 100mm dia for common delivery line, to be terminated outside the sump. 80mm dia Butterfly valve: 2 Nos 80 mm dia reflux valve: 2 Nos No. of Pumps/set: 2 nos. (1 W + 1 S) Discharge: 2 5 0 L P M Each Head: 1 5 Meters Electrical switch panel with DOL starter having all necessary accessories & safety devices of standard specifications. Automatic built-up water level controller with necessary length of cable upto control panel.Pumps shall be Factory Acceptance Test. (Hydropneumatic Pumping System With Variable Frequency Drive) Supply, Installation, Testing and Commissioning of compact packaged type skid mounted, self- contained variable frequency drive hydropneumatic system complete as per the technical specification complete as required: (i) In- line vertical multistage centrifugal water pump set (for clear water) with SS-304 casing, SS-304 impeller 69 with SS-316 shaft ,CI base with coating complete directly coupled with TEFC induction motor of class "F" insulation & efficiency class IE-3, 2900rpm, suitable for operation on 415 Volts ±10%, 3 phase, 50 HzA.C. supply. The entire system shall be mounted on a common base frame i/c common suction and common delivery of G.I heavy class pipe headers with flanges, interconnecting piping with all required Control Valves, Non-return valves, pressure gauge with isolation cock etc. complete as required. (ii) Pressure vessel of non corrosive FRP composite construction lined with NSF and/or FDA listed material, like high density polyethylene with fully replaceable polyurethane. Air cell burst pressure of minimum of 3 times the vessel operating pressure and prototype cycle tested for 80,000 cycles with charging connections to discharge pipe line with necessary flanges, gaskets, isolating valve, nuts/ bolts etc. with suitable foundation bolts etc complete as required. (iii) Microprocessor based multi pump controller/panel with graphical display and variable frequency drive with each pump (VFD) mounted inside a panel complete with pressure sensor transmitter. The graphical display capable to show number of pumps running & also communicate with other controllers following with open protocol through RS485 port. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. The panel should also have provision for manual / automatic alternate (cyclic) operation of pumps, ON/OFF switch complete as required. Pumps shall be Factory Acceptance Test. (v) Necessary foundation bolts, vibration elimination pads etc complete as required.
2
143889
287779.06
... More
Providing, fixing and testing heavy quality gun metal or brass ball valve with screwed ends 20kgm class on GI or copper pipe lines (Leader/ZOLOTO make) 20 mm (3/4") dia.
313
889
278344.64
... More
Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.
1
4050
4050.3
... More
75 mm C.I nahani trap / Multi nahani trap with grating with 75 mm C.I. bend with cleaning caps fixed compleate
520
3558
1850284.8
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%