Maharashtra Engineering Research Institute Tender

Providing and fixing push cock ( self closing tap) symet type of 15mm dia. Including necessary socket, testing etc. complete

Providing and applying pearl / luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc complete

Providing and fixing 15mm dia meter concussion push button type brass/gun metal self - closing tap including necessary

Providing and fixing 450mm x 550mm size superior type belgium mirror with 16mm dia. Nickel plated towel rod etc complete

Providing and laying vitrified matt finish tiles having size 590mm to 605mm x to 605mm o f8 to 10 mm thickness and confirming I.S.15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curring and cleaning etc. complete

Providing and laying 100 mm dia salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junction laying, jointing (including excavation and refilling the trenches) etc complete

Providing and applying primer coat on concrete / masonary / Asbestos Cement plastered surface including scaffolding if necessary preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and sand preparing as required etc complete

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curring etc

Providing and fixing coloured glazed earthenware wash hand basin of 55 cm x 40cm including cold water piller tap / cold and hot water piller tap brackets, rubber plugs and brass chain stop tap and necessary pipe connection including P.V.C. wastepipe and trap up to the outside face of the wall. Making good the damaged surface etc. complete

Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces oras directed, all necessary beads, mouldings and lipping, wrought iron hold gasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handels on both sides, and finishing with french polish etc complete

Removing old paint from steel and other metal surfaces and making the surfaces even with hand scrapping, scaffolding etc. complete

Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating without ventilators including fabricating / glazing with plain / obscured glass panels of approved type of quality iron oxidised fixtures and fastening oil paiting two coats complete

Providing and fixing on walls / ceiling / floors, 25mm dia. Heavy grade having embossed as ISI mark galvanised iron pipe weight of 3.01 K.G./Meter with necessary fittings. Remaking good the demolished portion and applying primer of anti corrosive oil paint two coats including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in P.W.D. chowky or as directed etc. complete

Providing and fixing in position powder coated alluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including alluminium frames 80 x 38 mm x 1.22 mm box type, 5mm thick sheet glass loovers, of approved quality etc. complete

Providing and fixing on walls/ ceiling/floors, 15mm dia. Heavy grade having embossed as ISI mark galvanised iron pipes weight of 1.48 K.G. / Meter with necessary fittings. Remaking good the demolished portion and applying primer of anti corrosive oil paint two coats including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in P.W.D. chowky or as directed etc. complete

Providing and fixing in position ( as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 K.G. / Rmt with window frame button track section 92 x 31.75 x 1.30 mm at weight 1.070 K.G./Rmt. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 K.G. / Rmt. The shutter should be bearing button 40 x 18 x 1.25 mm at weight 0.417 Kg / Rmt. interlocking section 40 x18 x1.10 mm at weight 0.469 Kg / Rmt. and handleand top section 40 x 18 x 1.25 mm at weight 0.417 kg / Rmt. as per detailed drawings and directed by Engineer in Charge with all necessary alluminium sections fixtures and fastening such as roller, bearing in nylon casting and self locking catch fited in vertical section of shutter including 5mm thick plain glass and alluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. with colour anodising with box