Maharashtra Tenders

CATEGORY: Custom Bid for Services - Towards the repair of the Vacuum contractor used in the starter of SAIT Mine Line Sr No SA 1435 main ventilator at Ballarpur Colliery 3 and 4 pits

Supply, Installation, Commissioning And Wiring For 01 Ton Long Travel Crane Of Alternator Section With 3 Phase, 415v, 01hp Crane Motor Along With Control Panel Components Of Timer/ovr/hooter/power Contactors & 8 Way Push Button Pendent, Brake Magnets And Complete Wiring With Suitable Size Of Copper Wires Confirming To Is 3177-1999 Or Latest.

Set Of High Tensile Hexagonal Head Bolt Fully Threaded And Nuts And Check Nuts, 1. Bolt Size : M 12 X 60 Mm Conforming To Is 1367 - 1 No. 2. Nut Of Property Class 10.9 - 01 Nos. 3. Plain Washer Is 2016- 02 No. 4. Spring Washer Is 3063/2002- 01 No. 5. Check Nut Of Size M12 Is 1364 Part 4 - 01 No. 6. Split Pin To Is 549 Size 3.2 Mm X28 Mm With Pin Hole Of Distance 4 Mm From The Free End For Split Pin As Per Is 549. -1 No. Make:tvs/unbrako/dfl/lps/tuff. Mfg. T.c To Be Provided With Material.

Upgraded High-capacity Draft Gear Arrangement For Freight Stock To Rdso's Drg. No. Wd-81010-s-03, Alt011 Or Latest, Item-19. Material And Specification Confirming To Rdso Specification No. Wd-71-bd-15, Rev-1 Of Nov - 2017. [firm's To Submit Offer With Latest Rdso Drawing & Specification]

Friction Liner Size - 104 X 60 X 8 Mm To Rdso Drg. Wx-21019 Alt. Nil. Matl. & Spec. As Per Is: 3885 (part-1)/1992 Gr.-iv, Amndt. No.1.

33561436 vent Assembly As Per Rcf Drg No.lw56431, Alt.a [ Warranty Period: 30 Months After the Date Of Delivery ] ] consignee Trainset Material Management, Wadibunder, Cr Maharashtra 216.00 Numbers

1. Ms Slotted Countersunk Flat Head Screw S [ms Slotted Countersunk Flat Head Screw Size M8x20mm Grade 4.8 As Per Is 1365-2005] 2.ms Slotted Countersunk Flat Head Screw S [ms Slotted Countersunk Flat Head Screw Size M6x12mm Grade 4.8 As Per Is 1365-2005.] 3.ms Slotted Countersunk Flat Head Screw S [ms Slotted Countersunk Flat Head Screw Size M6x20mm Grade 4.8 As Per Is 1365-2005.]

Special Screw For B.h. Support (high Tensile Steel) Cad. Plated

Heavy Duty Sewing Machine

CATEGORY: ring slugging wrench hammering ring spanner size 1-1 by 6 inch , ring slugging wrench hammering ring spanner size 1- 7 by 16 inch , ring slugging wrench hammering ring spanner size one and half inch , ring slugging wrench hammering ring spanner size 1- 9 by16 inch , ring slugging wrench hammering ring spanner size 1- 5 by 8 inch , ring slugging wrench hammering ring spanner size one and three quater inch , ring slugging wrench hammering ring spanner size 2 inch , ring slugging wrench hammering ring spanner size 2- 1 by 16 inch , ring slugging wrench hammering ring spanner size 2- 3 by 16 inch , ring slugging wrench hammering ring spanner size two and quater inch , ring slugging wrench hammering ring spanner size two and half inch , ring slugging wrench hammering ring spanner size 3- 1 by 8 inch , open end straight slogging wrench hammering spanner size 1 and half inch , open end straight slogging wrench hammering spanner size 1- 13 by 16 inch , open end straight slogging wrench hammering spanner size 2-15 by 16 inch