Jawaharlal Nehru Port Trust Tender
... More
The JNPT has issued a formal invitation for competitive bids for the Jawaharlal Nehru Port Trust project, for Renovation Of Kitchen Area Inside Jnpa Administration Building in Raigarh, Maharashtra, with an estimated contract value of Rs. 1,15,17,722. The bid opening date for this tender is 24-01-2025 and the last date for bid submission is 13-02-2025. Interested bidders for Jawaharlal Nehru Port Trust tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Jawaharlal Nehru Port Trust - JNPT Tender
Civil And Construction
Building Construction
Eprocure
Opening Date24 Jan 2025
Closing Date13 Feb 2025
Tender Amount₹ 1,15,17,722
Costs
EMD
₹ 2,72,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_JNPT_845942_1Bid Award Id
ViewTender No
PPD/DGM-I/Admin Kitchen/T-04/2025Tender Authority
Jawaharlal Nehru Port Trust ViewPurchaser Address
-Website
http://http://www.jnport.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and fixing in position Moisure Resistant Gypsum board ( MR Board of Saint Gobain or USG Make ) false ceiling with 12.5 mm thick Gypsum boards, screwed /fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25x50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The Rate should include necessary additional ceiling sections and er mediate channels. Additional intermediate channels should be fixed to straphangers for additional support to prevent strapping at every 1200 mili metre it emto be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.curved wedge of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 450 mm centers, 12.5 mm dry walls screws at 230 mm centers; fixing screws mechanically either with screw driver or drilling machine with suitable attachment etc. complete.
60
-
135000
... More
S/I/T/C of Addressable Stob Light Hooter
2
-
23174
... More
40 mm nominal outer dia Pipes
30
-
6510
... More
Fresh Air Grill (20 SWG) 300mm x 300mm
9
-
9819
... More
Work Table With 2 U/S-Top Made Of 16 Gauge S.S. Sheets To Be Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required. 2 Nos Of 18 Gauges S.S. Under Shelves. Table Has 6" Height Back Splash. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. To Be Made In Ss 304-48'' X30'' X34''Ht+6"
1
-
30902
... More
Palmate : Providing and fixing 760mm deep & 150-200 mm wide palmate made of 19mm thick plywood and finished with Gypsum Board externally & internally. Intermidiate supports at every 1200mm made up of 19mm thick plywood and finished with 0.8mm laminate. The exposed edges of the shelves to be covered with teak wood lipping finished with melamine polish. All complete including necessary hardwares,etc complete. as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming toI.IS. 303)
10
-
56870
... More
Providing and Fixing of Brass SS Floor Clean out plug 100mm Dia (Chilly)
2
-
6000
... More
sub main Light Point wiring from distribution board to switch board using 2Rx2.5Sq.M.m & 1Rx1.5Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles.
300
-
36600
... More
Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box
14
-
77028
... More
Blower for Exhaust
1
-
154128
... More
1/2" M-Clamp
45
-
3915
... More
Providing & Fixing of Brass Ball Valve For Water Supply and Irrigation System
-
-
-
... More
Supplying & erecting cast iron double flange butterfly valve of size 65 mm dia. complete as per specification no. FF-VL/BFV
1
-
2309
... More
sub main Power Point wiring from distribution board to switch board using 2Rx2.5Sq.M.m & 1Rx2.5Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles.
500
-
132500
... More
Supply, installation, Testing & commissioning 9L K Type Fire extingusher ISI Mark or as per direction by Engineer In Charge
2
-
38400
... More
Blower for Fresh Air
1
-
82908
... More
Providing and fixing stainless steel sink of size 600 x 510 x 200 mm including coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.
2
-
32000
... More
Air conitioner suppply
-
-
-
... More
Work Counter With 2 U/S-Top Made Of 16 Gauge S.S. Sheets To Be Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required. 2 Nos Of 18 Gauges S.S. Under Shelves.Table Has 6" Height Back Splash. )Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. )3" Offsets From Back Side To Be Provided For Provision Of Any Mep Services. To Be Made In Ss 304-52"X32"X 34"Ht+6"
1
-
30476
... More
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days
scaffolding etc.complete.
17
-
10863
... More
Officer's Table (5' x 2'3") Providing and fixing in place, table of size 1550mm x 675mm (worktop size)comprising of 25mm thick table top made of particle board with side credenza of size 900mm x 750mm x 300mm deep having sliding shutters with locks and a drawer pedestal of size 400mm x 500mm consisting of 2nos. drawer of 100mm deep and 300mm deep filing drawer having common lock including modesty apron to be made out of 19mm thick commercial plywood/particle board. The table top to have post.form edge. All complete including key board drawer, CPU trolley and necessary hardwares. all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. as per Architectrual
1
-
21600
... More
Breaking of RCC / PCC / Brickbat / coba etc. as per proposed drawing with manual breaker and stacking the debris at designated area with in work premises. Contractor to use support props for beam and surround area before starting any breaking activities.stacking generated debris at designated place upto 15 meter from the work premises, contractor has to created space to collect the debris for further disposal, area should be covered with green hassian cloth, item completes as per direction engineer in charge.
5
-
5815
... More
Providing and fixing in position uPVC/SWR (Soil/Waste/Rain) pipe of type-B 110 mm dia. in any position including all fittings and accessories, making joints / connections water tight with solvent cement, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. No separate payment shall be made for fittings and accessories).
50
-
23900
... More
Gas Manifold For 6+6 Cylinders
2
-
6932
... More
Idli Boiler Electric-1 Deck Idli Machine, Capacity 90 Idlies. Containing 6 Trays, Per Tray Has 9 Idlies Slots With Deep Trays. Electric Operated, 3Kw Heater, Rubberized Gasket Doors. Whole Body Made Of 18 Gauge S.S. Sheet Duly Matt Finished.-90 Idli'S
1
-
63788
... More
1/2" Flash Back Arestor With Fitting
1
-
4445
... More
S.S.Vented Storage Rac-18 Swg. 4 Nos Perforated Stainless Steel Shelves With With 1.5" Border 3 Sides Up And Front Side Down.) Legs Should Be 1.5” In Square Ss Pipe Legs Fitted With Nylon Adjustable Bullet Feet, All Shelfs Should Have Equal Distance. To Be Made In Ss 304-48" X24"X 72"Ht
3
-
104976
... More
S.S.Vented Storage Rack-18 Swg. 3 Nos Perforated Stainless Steel Shelves With With 1.5" Border 3 Sides Up And Front Side Down. Legs Should Be 1.5” In Square Ss Pipe Legs Fitted With Nylon Adjustable Bullet Feet. All Shelfs Should Have Equal Distance. To Be Made In Ss 304-60" X24" X66"Ht
1
-
39002
... More
Providing & Fixing UPVC SCH-80 40mm Dia
20
-
18600
... More
S.S.Vented Storage Rack-18 Swg. 4 Nos Stainless Steel Shelves With 1.5" Border 3 Sides Up And Front Side Down. Legs Should Be 1.5” In Diameter S.S Pipe Legs Fitted With Nylon Adjustable Bullet Feet.) All Shelves Should Have Equal Distance. To Be Made In Ss 304-48" X18"X 72"Ht
1
-
32429
... More
Handwash Sin-Top Is Made Of 16 Gauge S.S. Sheet Which Is Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required. 1" Square S.S. Pipe For Cross Braising. Table Has 6" Height Of Back Splash. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. 1 Nos S.S. Sink Of Size 12" L X 12" W X 12" Deep With 1.5" Drain. Sink Has 20 Swg Front Side Closed. To Be Made In Ss 304-16" X16"X 34"Ht+6"
1
-
19238
... More
PLUMBING WORK
-
-
-
... More
1" M.S. Elbow
15
-
2820
... More
Pressure Gauge With Valve
2
-
4884
... More
Removing of existing wall plaster and stacking generated debris at designated place upto 15 meter from the work premises, contractor has to created space to collect the debris for further disposal, area should be covered with green hassian cloth, item completes as per direction engineer in charge.
510
-
26520
... More
Supply,installation, laying and commissioning Cat 6 UTP cable with accessories i.e.conduit pipe, clamp etc.Complete
300
-
40800
... More
Dosa Bhatti With Pipe U/S-Top Is Made Of 16 Swg S.S. Sheets Which Are Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Hotplate Has 6" Height Of Back Splash. 2 Nos Of V–950 (70,000 Btu/Hr) For Hot Plate, L.P.G. Operated Burners Are Used With 1 Nos. Pilot, With Ignition Window And Oil Collection Tray. Hot Plate Should Be Made Of M.S 18Mm Thickness Covered With Top. Three Side Up By 10Mm With Ms Angle Covering The Whole Plate. S.S. Front Panel, With Needle Control Valves For Burners And Pilots. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. 3" Offsets From Back Side To Be Provided For Provision Of Any Mep Services. The Groove Should Made On The Top Of The Range With Slope To Collect Oil In Box. 19 Swg. Stainless Steel Perforated Sides.
To Be Made In Ss 304-48'' X30'' X34''Ht+6"
1
-
56986
... More
Exhaust System
-
-
-
... More
Exhaust Blower Stand
1
-
13608
... More
Providing and fixing plywood Laminated panelling, frame work as per requirement to be Fixed on wall/masonry/column with necessary fixing details to attain the reqd level of the surface, stability & rigidity. framework to be covered using 12 mm thick Mariane grade plywood as per design. Finished with 1 mm thick approved laminate from sides & top. Edges of laminate to be made smooth. Rate inclusive of necessary Cutouts for switches /lights & other fixtures Basic Rate of laminte Rs. 450/Sq.M..
20
-
79000
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : -b 20 mm nominal bore
3
-
1560
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the
-
-
-
... More
Computer Table 3 Side Closed, 2 Drawers & 2 U/S With 2 Openable Drawers With Lock-Top Made Of 16 Gauge S.S. Sheets To Be Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required. 2 Nos Of 18 Gauges S.S. Half Under Shelves. )Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. Table Has 20 Swg 3 Side Closed. The Drawers Should Come Withpull Out Facility In The Front. Lock Provision To Be Made. To Be Made In Ss 304-48"X 24" X34"Ht
1
-
36288
... More
2 Burner Gas Range With Pipe U/S-16 Swg. Stainless Steel Top, Supported With 2Mm M.S. Sheet With Heat Insulation Of 3Mm. 19 Swg. Stainless Steel Perforated Sides. 25Mm X 25Mm X 3Mm Thick Ms Angle For Framework. 2 Nos M-50 (1,00,000 Btu/Hr) Lpg Operated 2 Pilots To Be Provided. All Burners Should Be Provided With Needle Control Values And Pilot. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. The Casting Size Should Be 14" X 14", 2 Nos. 3" Offsets From Back Side To Be Provided For Provision Of Any Mep Services. Soil Trays To Be Provided. To Be Made In Ss 304-48"X 32" X34"Ht+6"
1
-
45430
... More
Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete
77
-
154616
... More
S.S. Hood With Filter-Hoods Should Be Island Type Made Of 18 Swg S.S 304. Baffle Filters Should Be Made Of 19 Swg Border & 20Swg Filters. Should Be Fitted In Hoods. The Hood Should Have Light Arrangements. )Exhaust Cut Out And Spot Cooling Cut Outs (If Any) Should Be Made As Per Hvac Vendor Requirement. Proper Partition Should Be Given In Island Hoods)Proper Stifners Should Be Provided For Strengthening The Hoods Having More Than 2 Mtrs Length.
All Hoods Drawings And Cut Out Should Made In Consulataion With Hvac Consulatant / Vendor. To Be Made In Ss 304-50"X26"X21"Ht
1
-
34992
... More
32 mm nominal outer dia Pipes
50
-
26550
... More
BLDC Ceiling fan, 26 watt to 30 watt, 1200 mm sweep, energy efficient Sweep, with regulator and remote control, suitable for single phase, 230V, 50Hz, A.C. supply operation complete with accessories such as 15" long down rod, canopies, & terminating of 25mm FR MMS ISI Mark PVC conduits in floor/ceiling with junction & complte with its all accessories. (Make- Precision or Equivalent )
10
-
25000
... More
SITC of SS Flexible Drop 1500mm/1200mm Length along with fitting materials.
19
-
51870
... More
Providing and Fixing of Brass Y Strainer 32mm Dia (ZOLOTO)
2
-
10452
... More
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.
337
-
29319
... More
CABLES : Supplying and laying in ready built-up trenches / excavated trenches, through hume pipes laid by other agencies / on walls or on walls of lift shafts or on columns or on ceiling using G.I. spacers and G.I. saddles / G.I clamps made from G.I. strips, or on cable trays (cable tray supply & installation covered under item D.3) with nylon cable ties, the following XLPE insulated 1.1 KV grade, armoured and overall sheathed copper / aluminium conductor cables are made to IS:7098 (Part-l) 1988. Note: The quantity given in the quantity column is only indicative. The contractor shall bring to site cables as per actual requirement. Note: A2XFY/A2XWY stands for aluminium conductor armoured XLPE cable, 2XWY stands for Copper Conductor armoured XLPE cable.
-
-
-
... More
SITC of conceled/above false ceiling Insect Catcher Point with 2X1.5 sq. mm + 1X1 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .
6
-
8796
... More
Fitting For Ball Valve
2
-
4750
... More
Vegetable Basket Storage Rack-18 Swg. 4 Nos Stainless Steel Shelves With 1.5" Border 3 Sides Up And Front Side Down. Legs Should Be 1.5" In Diameter S.S. Pipe Legs Fitted With Nylon Adjustable Bullet Feet. All Shelves Should Have Equal Distance. To Be Made In Ss 304-24"X24"X 72"Ht
2
-
42282
... More
Dampers : 20 SWG Aluminium, Angles & Flanged Joints
2
-
10628
... More
Canvas
2
-
5000
... More
Pot Rack With 4 Shelves-Outside 25Mm ∅ X 16 Swg. Thk. S.S. 304 Quality Pipe. Na 2)Indise 20Mm ∅ X 16 Swg. Thk.
S.S. 304 Quality Pipe. All Shelfs Should Have Equal Distance.
Gap Between The Two Pipe 4" Center To Center. Legs Should Be 1.5" ∅ S.S. Pipe Legs Fitted With Nylon Adjustable Bullet Feet.
All Welding Works To Be Done In Argon Arc And Well Finished. Inner Pipes Of Shelf To Be Fitted On Pipe & Socket Hole Type With Cladding No Welding Done. To Be Made In Ss 304-54"X 24"X 66"Ht
1
-
37793
... More
Staff Locker With 12 Compartment-Unit Shall Be Made Of 22 Powder Coated Colour Ms, 22 Swg Lock, Locker Doors Shall Be Flush, Having , Heavy Duty Butt Type Hinges Each Compartment Shall Have Horizontal Louvers The Front Side.
To Be Made In Ms-30"X 16" X72"Ht
2
-
56430
... More
S.S. Onion & Potato Bin-Made Of S.S. 12Mm X 12Mm Wire Mesh From All Sides. Opening On Top For Loading And Opening From Downside For Taking Out The Materials. Heavy Duty Castor Wheels Should Be Provided With Slope In Front Side For Easy Flow Of Materials. S.S. Angles Of 25Mm X 25Mm X 3Mm Thick For Framework.) To Be Made In Ss 304-48"X 24"X 48"Ht
1
-
34668
... More
Supply, installation, testing and commissioning of analogue addressable Manual Break Glass unit-( Push-in Pull-down System) including the mounting box.
2
-
13104
... More
4C X 4 Sqmm. 2XWY Cable
200
-
82000
... More
Providing & Fixing UPVC SCH-80 50mm Dia
5
-
6250
... More
Kitchen Exhaust Blower to be 5 HP 960 Body to be fabricated from 4mm thick heavy duty MS Plates reinforced angles 40x40x5 for sturdy and smooth performance.Impellar to be dynamically balanced.
-
-
-
... More
Providing & Fixing Door Shutters in Both side Laminate finish : with Complete Hardware at require location and having height more than 1:5 meter made by using solid core Mariane type flush door 35 mm thick of the requisite manufacuture viz.Anchor / Century / Kenwood / Duro or equivalent generally confirming to I.S.710 -termite treatment to plywood and wood work with ten years guarantee bond etc. Including all leads & lifts etc. Complete necessary lipping (BTC) mounding, hardware, locks handle’s etc.as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.
9
-
94500
... More
1/2" Ball Valve
2
-
4382
... More
Internal Water Supply System
-
-
-
... More
2 Door Vertical Deep Freezer -600 Ltr-20 Swg. Stainless Steel Front Panel & Doors, 20 Swg. Stainless Steel Sides & Rear, 22 Swg. Stainless Steel Interior, P.U.F. Insulation, -5°C To -15°C Temperature Range, To Be Provided With Adj. Ss Shelves, Two Separate Partition. To Be Made In Ss 304-27"X30"X80"Ht
1
-
110808
... More
Removing Wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etc complete
4
-
308
... More
Providing & Fixing of Brass Float Valve 32mm Dia
1
-
6110
... More
Part B - Low Side Works
-
-
-
... More
Dismentaling & removal of Existing False Ceiling
5
-
805
... More
Providing and fixing 75mm PVC nahani trap with grating etc. complete.
5
-
595
... More
SITC of Supplying and erecting Insect Catcher
6
-
50700
... More
S.S.Vented Storage Rack-18 Swg. 3 Nos Perforated Stainless Steel Shelves With With 1.5" Border 3 Sides Up And Front Side Down. Legs Should Be 1.5” In Square Ss Pipe Legs Fitted With Nylon Adjustable Bullet Feet. All Shelfs Should Have Equal Distance. To Be Made In Ss 304-40"X 18" X66"Ht
2
-
66070
... More
Kitchen Utility Trolley With Heavy Duty Castor Wheel-18 Swg. Stainless Steel Body. 1.5" ∅ 16 Swg Thk S.S. 304 Quality Pipe.4" ∅ X 1.5" Thick Heavy Duty Rubberized Castor Wheels (Pin Type) 4 Nos, (2 Nos. Lock Provision), To Be Made In Ss
304-36" X24"X 36"Ht
3
-
59376
... More
SITC of conceled/above false ceiling Wall Fan Point with 2X1.5 sq. mm + 1X1 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch & 6A Socket in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .
4
-
3788
... More
SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- 'C' Class, with Fittings to suiitable pipe Fabricated IS : 3589 / 6.3mm thick / IS : 1239 / II - Heavy Grade, including MS Plate Fabricated Flanges to IS / DIN / ASA 150 LBS Mtring & Aboveground Pipe Protection (Painting) and all required 'supports etc.
-
-
-
... More
Providing and applying Antimicrobial pearl/ luster / Satin finish paint of approved colour and shade over punned / puuty finish etc. complete.
216
-
54648
... More
Kitchen Exhaust Blower to be 7.5 HP 960 Body to be fabricated from 4mm thick heavy duty MS Plates reinforced angles 40x40x5 for sturdy and smooth performance.Impellar to be dynamically balanced.
-
-
-
... More
Blower Stands
1
-
15840
... More
Tilting Type Masala Grinder - 20 Ltr-Stainless Steel Construction , Capacity: 20 Ltr, The Roller Stone Assembly Is Fitted With Wiper To Ensure 100% Grinding In Quicker Time , Unique Adjustable Load Balancing System Provided For Even Spread Of Load And For Very Efficient Grinding-Std
1
-
80000
... More
SITC ceiling/wall mounted 6W speaker with line matching transformer including necessary accessories Make Honeywell
8
-
10928
... More
Co2 type of Fire extinguisher of 4.5 Kg cap. complete ready for use as per IS 2171 having ISI Mark /Seasfire
3
-
32700
... More
Removing of existing Doors with door frame, windows , mild steel grill, railing, Ventilators, shaft door, false ceiling, partitions , etc as per Direction Engineer incharge and proposed Drawings, item includes lowering down debris at designated marked place which is surrounding covered with green hassian cloth , re usable scrap items to be kept at one place as per instructions engineer in charge.
15
-
1875
... More
Providing and applying plastic emulsion paint of approved colour, shade and quality to old/new surfaces in two coates including scaffolding, preparing the surfaces etc. complete. (including primer coat).(Dulux, Asian or equivalent)
176
-
38720
... More
Crockery Washing 3 Sink Unit-Top Is Made Of 16 Gauge Ss Sheet Which Is Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick
S.S Angle For Frame Work. Sound Dead-End Paint Is Applied On Bottom Of Ss Top If Required. Table Has 6" Height Of Back Splash. Legs Should Be 1.5" In Square 16 Swg S.S Pipe / Legs Fixed With Adjustable Nylon Bullet Feet. 3Nos S.S. Sink Of Size 18" L X 18" W X 12" Deep With 1.5" Drain. Table Has 20 Swg Front Side Closed. 1" Square S.S. Pipe For Cross Braising. To Be Made In Ss 304-66"X 30" X34"Ht+6"
1
-
50558
... More
Providing waterproofing in Toilets including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.
8
-
49560
... More
sub main Power Point wiring from distribution board to switch board using 2Rx1.5Sq.M.m & 1Rx1Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles.
300
-
58500
... More
Neel Kamal P.V.C. Basket-Closed From 4 Sides And Bottom And Open From Top , Size : 400 X 300 X 220, Food Grade Hdpe Material-Std
12
-
13248
... More
KITECHEN EQUIPEMENT
-
-
-
... More
Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M.including cement float ,filling joints with neat cement slurry, curing, polishing and cleaning complete.
180
-
224460
... More
3C X 4 Sqmm. 2XWY Cable
6
-
1404
... More
Wall Mounted Plate Drain Rack-Shelf Have 18 Guage S.S. Body. Bolting Arrangement Provision Should Be Provided For Wall
Hanging. To Be Made In Ss 304-66" X12"
1
-
6237
... More
4C X 4 Sqmm. 2XWY Cable
20
-
5480
... More
Providing and Fixing, testing and commissioning of C.P. brass angle valve with C.P. wall flange, Nut and Washer etc. complete as required.
5
-
8250
... More
Supply, Installation testing and commissioning RJ-45 Cat-6 Information Outlet with face plate with accessories i.e.conduit pipe,clamp etc.
6
-
4188
... More
EndTermination:Supplying and making end terminal joints to the following 1.1 KV grade PVC insulated armoured overall sheathed copper / aluminium conductor XLPE cables, using nickle plated cable glands, copper compression type cable sockets , PVC insulating tapes, etc.e.
-
-
-
... More
Pulverizer 3 Phase - 7 Hp-Inner Frame Is Made Of Ss 304 Grade Stainless Steel. It Reduces The Grinding Time Drastically And Make The Job Very Easy . There Are No Adjustments Or Tightening Required To Control The Grinding. 7Hp Motor Required-Std
1
-
131963
... More
Supply,installation, laying and commissioning Cat 6 UTP cable with accessories i.e.conduit pipe, clamp etc.Complete
450
-
61200
... More
Clean gas Agent ( NAF P IV )
3
-
60375
... More
20 mm nominal outer dia Pipes
20
-
8100
... More
Providing & Fixing UPVC SCH-80 32mm Dia
20
-
16200
... More
Work Counter With 2 U/S-Top Made Of 16 Gauge S.S. Sheets To Be Duly Matt Finished.25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. )Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required.2 Nos Of 18 Gauges S.S. Under Shelves. )Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet.To Be Made In Ss 304-60"X26"X 34"Ht
2
-
70422
... More
Work Counter With 2 U/S-Top Made Of 16 Gauge S.S. Sheets To Be Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. )Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required. 2 Nos Of 18 Gauges S.S. Under Shelves . Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. To Be Made In Ss 304-57"X26"X34"Ht
1
-
33629
... More
S.S.Dinning Table 6 Seater With Folding Stool-Completely Fabricated In S.S 304. , Top Will Be In 18 Swg S.S 304, Pipes Will Be Of 18 Swg And 1.5" Size S.S 304.Will Come With Round Suitable Seat.)Foldable Stools To Be Provided And Same. To Be Made In Ss 304-72"X32"X 30"Ht
1
-
42282
... More
CIVIL WORKS
-
-
-
... More
25 mm NB ‘C’ Class
30
-
28260
... More
Internal Drainage System
-
-
-
... More
Air Testing, Installation & Transportation Charges
1
-
41400
... More
1 Nos of 16A 5-pin sockets and 1 Nos 16A SP switch in suitable backbox along with front plate.
16
-
15440
... More
Supply, Installation, Testing & Commissioning of Bullet Camera
8
-
579600
... More
ELECTRICAL WORK
-
-
-
... More
Supply, Installation testing and commissioning Cat-6 Patch cord 2 meter at user end.
12
-
4632
... More
Providing & Fixing of PVC Multi Floor Trap 110x75x50mm Dia
10
-
36500
... More
G.N.Pan With Lid-6 Nos Of 1/1 Gn Pans Deep Of 6". To Be Made In Ss 304-1/1 Size Gn Pans
10
-
35320
... More
Ncv
12
-
7392
... More
Providing, laying and fixing P.V.C. Pipe of 40 mm. dia. type-B with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
5
-
1085
... More
40 mm NB ‘C’ Class
10
-
16350
... More
Gas Bank Cabinet With Door 6+6 Cylinder
1
-
48180
... More
SITC of Primary Light Point controlled by one 6A SP Switch.(Point Length will be Avg. 6Mtrs for first point from Switch Board .)
16
-
23360
... More
Ducting MS Bracket Support for Exhaust / Fresh Air
1
-
44940
... More
4 Door Vertical Refregerator - 1200 Ltr-20 Swg Stainless Steel Front Panel & Doors , 20 Swg Stainless Steel Side & Rear, 22 Swg Stainless Steeel Interior , P.U.F Insulation , 0°C To +5°C Temperature Range, To Be Provided With Adjustable Ss Shleves Four Separate Partition. To Be Made In Ss 304-48"X30"X80"Ht
2
-
302670
... More
Cylinder Pigital
12
-
9012
... More
Providing and fixing mild steel grill gate as per the detailed drawing including hinges ,locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete. (weight 18 Kilogram. to 20 Kilogram. Per Sq.m.)Spec.Number: As directed by Engineer- in-charge.
15
-
31500
... More
Dish Landing Table With Garbage Chute-Top Made Of 16 Gauge S.S. Sheet To Be Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick
S.S. Angle For Framework. Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required. 1" Square S.S. Pipe For Cross Braising. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. Construction Of S.S. With Raised 2" Border Type Lipping Closed On Three Sides. 8" ∅ Chute Located On The Right Hand Side On The Table. Table Has 6" Height Of Back Splash. To Be Made In Ss 304-54"X 24"X 34"Ht+6"
1
-
27896
... More
0.80 MM (22 Gauge) : Fresh Air Ducting
-
-
-
... More
Supply, Installation, Testing & commissioning of 3-Ph Power Sockets for Kitchen with 32A, 5Pin, Socket & Plug (3P+N+E) - 1no; 32A, FP MCB+ELCB (100mA) - 1no etc complete mounted in IP65 Box. Plug & Socket must be of IP65 Type. (Make- Legrand or equivalent ) or as per Direction by Engineer In Charge.
3
-
73260
... More
Removing Of Existing Plumbing & Draine line etc
1
-
52500
... More
Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)
31
-
234391
... More
SITC of conceled/above false ceiling Ceiling Fan Point with 2X1.5 sq. mm + 1X1 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch & 5 Step Fan Speed Regulator in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .
10
-
9260
... More
M.S. Coupling
15
-
870
... More
External Water Supply System
-
-
-
... More
Soiled Dish Landing Trolley With Heavy Duty Castor Wheel-18 Swg. Stainless Steel Body. 1.5" ∅ 16 Swg Thk S.S. 304 Quality Pipe. 4" ∅ X 1.5" Thick Heavy Duty Rubberized Castor Wheels (Pin Type) 4 Nos, (2 Nos. Lock Provision.) To Be Made
In Ss 304-36"X 24" X34"Ht
2
-
48478
... More
S/I/T/C of Addressable Relay Out Put Module
3
-
50718
... More
Providing and Fixing, testing and commissioning of C.P Copper connection S S Braided Flexible 375 mm long including nuts and washers and making connection to fixtures and fittings complete as required.
5
-
5000
... More
Single Sink Unit-Top Is Made Of 16 Gauge S.S. Sheet Which Is Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. )Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required.1" Square S.S. Pipe For Cross Braising.Table Has 6" Height Of Back Splash. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. 1 Nos S.S. Sink Of Size 18" L X 12" W X 12" Deep With 1.5" Drain. Sink Has 20 Swg Front Side Closed. 3" Offsets From Back Hand Side To Be Provided For Provision Of Any Mep Services. To Be Made In Ss 304-18"X 24"X 34"Ht+6"
1
-
16000
... More
Work Table With 2 U/S-Top Made Of 16 Gauge S.S. Sheets To Be Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required. 2 Nos Of 18 Gauges S.S. Under Shelves. Table Has 6" Height Back Splash.)Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. 3" Offsets From Back Side To Be Provided For Provision Of Any Mep Services. To Be Made In Ss 304-54"X 30"X 34"Ht+6"
2
-
60000
... More
Burner Pigital
12
-
8712
... More
Carting away of debris from work premises to dumping area with tractor trolley as directed by engineer in charge .
25
-
87500
... More
3C X 4 Sqmm. 2XWY Cable
400
-
174400
... More
Supply, installation, testing and commissioning of Response Indicator.
8
-
1744
... More
Supply, Installation testing and commissioning RJ-11 Information Outlet with face plate
3
-
1698
... More
Officer's chair W560xD560xH1000mm Providing & supplying Officer chair finished with Fabric, Mesh fabric, Fixed PP armrest, with Nylon frame, Mesh back,mesh seat filled, with foam, Five star nylon base with nylon casters lift, Adjustable seat height and tilt tension, Swivel type, Powder coating base etc complete as approved by the Engineer in charge etc. all complete. (Wipro, featherlite or equivalent)
6
-
84408
... More
2 Burner Gas Range With Pipe U/S-16 Swg. Stainless Steel Top, Supported With 2Mm M.S. Sheet With Heat Insulation Of 3Mm.)19 Swg. Stainless Steel Perforated Sides. 25Mm X 25Mm X 3Mm Thick Ms Angle For Framework. 2 Nos M-50 (1,00,000 Btu/Hr) Lpg Operated 2 Pilots To Be Provided..)All Burners Should Be Provided With Needle Control Values And Pilot. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. The Casting Size Should Be 14" X 14", 2 Nos. 3" Offsets From Back Side To Be Provided For Provision Of Any Mep Services. Soil Trays To Be Provided. To Be Made In Ss 304-48"X24"X34"Ht+6"
1
-
40399
... More
S.S.Platform Trolley With Heavy Duty Castor Wheel-16 Swg. Ss Body. , 25Mm X 25Mm X 3Mm Thick S.S. Angle For Frame Work, 1.5" Ss Pipe For Handle 4" ∅ X 1.5" Thick Heavy Duty Rubberized Castor Wheels (Pin Type) 4 Nos, (2 Nos. Lock Provision) To Be Made In Ss 304-36" X24"X 36"Ht
2
-
36112
... More
Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete
243
-
10935
... More
NETWORKING SYSTEM
-
-
-
... More
2 Nos of 16A 5-pin sockets and 2 Nos 16A SP switch in suitable backbox along with front plate.
10
-
18900
... More
FIRE ALRAM SYSTEM
-
-
-
... More
65 mm NB ‘C’ Class
20
-
53640
... More
Supply, Installation, Testing & commissioning of 1-Ph Power Sockets for Kitchen with 32A, 5Pin, Socket & Plug (3P+N+E) - 1no; 32A, DP MCB+ELCB (100mA) - 1no etc complete mounted in IP65 Box. Plug & Socket must be of IP65 Type. (Make- Legrand or equivalent ) or as per Direction by Engineer In Charge.
10
-
160000
... More
0.80 MM (22 Gauge) : Exhaust Ducting
2300
-
368000
... More
Brass Ball Valve 40mm Dia
2
-
9256
... More
Staff Locker With 9 Compartment-Unit Shall Be Made Of 22 Powder Coated Colour Ms, 22 Swg Lock, Locker Doors Shall Be Flush, Having , Heavy Duty Butt Type Hinges Each Compartment Shall Have Horizontal Louvers The Front Side.
To Be Made In Ms-36" X16" X72"Ht
1
-
25913
... More
Supply, installation, testing and commissioning of Analogue Addressable Type , ceiling mounted Heat Detector with Mounting base.
16
-
58656
... More
Providing & Fixing UPVC SCH-80 65mm Dia
10
-
23600
... More
C.P.sink mixer Supply of Sink Mixer - Jaquar note:- J shape spout with wall flange of heavy duty Jaquqr make (Wall mounted). (Sink cock with J shape spout Cat. No. FLR-5309N OR consider equivalent make)
2
-
9694
... More
Providing and fixing in position uPVC/SWR (Soil/Waste/Rain) pipe of type-B 75 mm dia. in any position including all fittings and accessories, making joints / connections water tight with solvent cement, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. No separate payment shall be made for fittings and accessories).
40
-
12560
... More
S.S.Grating With Jali & Angle Frame-The Drainage Channel For Grating Should Be Sloped Towards The Middle And In Longitudinal Direction To Secure Best Hygiene.) The Back Of The Frame Is To Be Filled With Epoxy Or Concrete At The Site To Stabilize The Frame And Supplied At Time Of Tile Work , Channel Should Be Made In 2 Mm Ss 304 Welded With A Security Crossbar. The Slope Towards Outlet Is 1%.Round Hygienic Outlet In Side Within The General Frame Of Channel. Channel Height Is 6" Deep Serrated Grating In Ss 304 With 25Mm X 3Mm @ 25Mm Pitch. To Be Made In Ss 304-12"X 12"
5
-
26395
... More
P&F 45-60 cm deep cupboard type storage unit made out of 19mm thick Commercial plywood of the requisite manufacture i.e. Anchor/Century/Kenwood/ Duro/Jet or equivalent generally confirming to I.S. 303 for frames, internal verticles horizontal divisions, shutters and 6mm & 12mm thick Commercial plywood with necessary locks, handles, hardware, lipping & beading patti (BTC) etc. The total shall be finished with formica laminate sheet in approved pattern with grooves etc. and two coats of french polish with antitermite treatment to plywood including all leads & lifts etc. complete. as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.
2
-
34550
... More
Providing & Fixing of UPVC ASTM Pipe SCH -80 For External Water Supply and Irrigation System.
-
-
-
... More
Masala Trolley With 6" Dia 8 Container & 1 U/S With Heavy Duty Castor Wheel-16 Swg Stainless Steel Top . 18 Swg Stainless Steel 1 Under Shelf. Provision For 6" ∅ Size, 8 Round / Square Container Slots. 18 Swg Stainless Steel Tank For Containers. 4" ∅ X 1.5" Thick Heavy Duty Rubberized Castor Wheels 4 Nos. 2 Wheels Of Brakes & 2 Wheels Without Brakes. To Be Made In Ss 304-36" X18"X 34"Ht
1
-
25913
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
... More
Work Counter With 2 U/S-Top Made Of 16 Gauge S.S. Sheets To Be Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Sound Dead-End Paint Is Applied On Bottom Of S.S. Top If Required. 2 Nos Of 18 Gauges S.S. Under Shelves. Table Has 6" Height Back Splash. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. To Be Made In Ss 304-66"X 26" X34"Ht+6"
1
-
38207
... More
S.S.Gunny Pilot-16 Swg 1.5" Square Pipe For Frame Work, 1.5" Ss Sq Pipe With Adjustable Nylon Bullet Feet Inside 1" Ss Sq Pipe 16 Swg. Thk Ss 304 Quality Pipe. Gap Between The Two 1" Pipe Is 5"
Center To Center, ) To Be Made In Ss 304-66"X 48"X 10"Ht
1
-
20790
... More
SITC of Speaker Cable 2 core X 1.5 sqmm shielded Audio cable. Legrabd Make
100
-
12100
... More
Brass Ball Valve 50mm Dia
2
-
10348
... More
Side Table : Providing & fixing 40 -45cm deep side table made out of 19mm thick Commercial plywood for all sides, 12mm & 6mm thick Commercial plywood for drawers of the requisite manufacturer i.e. Anchor/Century/Green ply/Kenwood or equivalent confirming to I.S. 303 with necessary approved fixtures & fastening and lipping patti for edges. The outer surface shall be finished with laminate sheets of approved make in approved pattern with grooves etc melamine poish for beading patti and antitermite treatment to wood work including all leads & lifts as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.
1
-
31952
... More
Providing, laying and fixing P.V.C. pipe of 50 mm. dia. type-B with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
5
-
1825
... More
P&F Flooring 600 x 600 : Providing and fixing MATT FINISH ANTISKID tiles of minimum size 600 x 600 mm of about 10mm thick having water absorption less than 0.055 of approved make, shade and pattern for floor & dado in required position fixed on plaster of cement mortar 1:4 neat cement paste. including filing joints with neat white cement slurry curing cleaning etc. complete
433
-
1871426
... More
Providing & Fixing of 2TR split type A.C. 5 star rating with 100% cooper inside drain system etc complted make Volatas Etc
2
-
150096
... More
S.S.Grating With Jali & Angle Frame-The Drainage Channel For Grating Should Be Sloped Towards The Middle And In Longitudinal Direction To Secure Best Hygiene.)The Back Of The Frame Is To Be Filled With Epoxy Or Concrete At The Site To Stabilize The Frame And Supplied At Time Of Tile Work , Channel Should Be Made In 2 Mm Ss 304 Welded With A Security Crossbar.The Slope Towards Outlet Is 1%.Round Hygienic Outlet In Side Within The General Frame Of Channel. Channel Height Is 6" Deep Serrated Grating In Ss 304 With 25Mm X 3Mm @ 25Mm Pitch. To Be Made In Ss 304-24" X10"
34
-
328202
... More
Dismantling and lowering down the debris generated from breaking of brick masonry / walls of any thickness at ground and first floor, stacking generated debris at designated place upto 15 meter from the work premises, contractor has to created space to collect the debris for further disposal, area should be covered with green hassian cloth, item completes as per direction engineer in charge.
20
-
4180
... More
3 Burner Gas Range With Pipe U/S-16 Swg. Stainless Steel Top, Supported With 2Mm M.S Sheet With Heat Insulation Of 3Mm. 19 Swg. Stainless Steel Perforated Sides. 25Mm X 25Mm X 3Mm Thick Ms Angle For Framework. 3 Nos M-50 (1,00,000 Btu/Hr) Lpg Operated 3 Pilots To Be Provided. All Burners Should Be Provided With Needle Control Values And Pilot. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. The Casting Size Should Be 16" X 16", 3 Nos. 3" Offsets From Back Side To Be Provided For Provision Of Any Mep Services. Soil Trays To Be Provided. To Be Made In Ss 304-76"X30"X 34"Ht+6"
1
-
48319
... More
PA SYSTEM
-
-
-
... More
25 mm nominal outer dia Pipes
40
-
17160
... More
Providing & Fixing of Temporary partition with GI Stud and Gypsum Panting finish
44
-
103576
... More
INTERIOR WORK
-
-
-
... More
Supply Installation Testing & Commissuioning of Air Valve 25 NB at terrace with ball valve as per Site Requiremnt or as per Direction by Engineer In Chargwe.
2
-
6520
... More
Providing & fixing Roller blind made up of APO Grey or approved shade 100% polyester or polymer coated glass fi bre. with White coloured hardware • Bracket covers • Double bead plastic chain, secured with a child safety cord tensioner • Dual brackets • Linked brackets • Headbox • Side channels etc complete as approved by the Engineer in charge etc. all complete. (Hunter Douglas or equivalent)
15
-
24000
... More
Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.
161
-
123165
... More
Click On Adaptor
12
-
7392
... More
FIRE FIGHTING
-
-
-
... More
GAS PIPING
-
-
-
... More
Chappati Hot Plate With Puffer & Pipe Shelf-Top Is Made Of 16 Gauge S.S. Sheets Which Are Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Hotplate Has 6" Height Back Splash. 2 Nos Of V–700 (70,000 Btu/Hr) For Hot Plate And 1 Nos Of V-350 (70,000 Btu/Hr) For Puffer Plate L.P.G. All Operated Burners Are Used With Pilot, With Ignition Window And Oil Collection Tray. Hot Plate Should Be Made Of Ms 18Mm Thickness Covered With Top As Provided With Puffer Plate On Right Hand Side. S.S. Front Panel, With Needle Control Valves For Burners And Pilots. )Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. 3" Offsets From Back Side To Be Provided For Provision Of Any Mep Services. )The Groove Should Made On The Top Of The Range With Slope To Collect Oil In Box. 19 Swg. Stainless Steel Perforated Sides.-48"X 30" X34"Ht+6"
1
-
58671
... More
1/2" Tata Pipe
200
-
51000
... More
15 mm nominal outer dia Pipes
40
-
13840
... More
Providing and applying two coats of synthetic enamel paint for window grills and railing of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.
30
-
2880
... More
Providing double sills, jambs and frames of black/approved colour granite slabs 18 to 20 mm thick of approved quality, vein and colour with machine polished surface on a bed of cement mortar 1:4 including neat cement float, removing existing cills stacking the same and debris disposing off upto a distance of 50 metres, removing, refurbishing & refixing existing alu. grill, filling joints with cement slurry to match the colour of the slabs, curing polishing and rounding edges, cleaning etc. complete. (Basic rate Rs. 165/sft)
59
-
70682
... More
Ducting
-
-
-
... More
Providing and preparing kitchen Platform upto 75 cm width, made up from 30 mm thick and 75 cm high vertical support for kadppa at 1m.c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete.
4
-
39308
... More
Regulator
1
-
4990
... More
DISMANTLING WORKS
-
-
-
... More
Copper Cylinder Pigital
1
-
713
... More
Brass Ball Valve 32mm Dia
2
-
8502
... More
S.S.Vented Storage Rack-18 Swg. 3 Nos Perforated Stainless Steel Shelves With With 1.5" Border 3 Sides Up And Front Side Down. Legs Should Be 1.5” In Square Ss Pipe Legs Fitted With Nylon Adjustable Bullet Feet. All Shelfs Should Have Equal Distance. To Be Made In Ss 304-36" X24"X 66"Ht
1
-
27446
... More
G.I. Sheet Metal Ducting (Rectangular) (Site Fabricated ) for Exhaust/Fresh Air/Plenum
3500
-
577500
... More
Supplying, erecting, testing and commissioning of Upright/ Pendent quartzoid bulb sprinkler, 15 mm (½") dia. NBCM Body chrome finished, 68º C fixed tempeMtrure Mtring with deflector disc of conventional construction complete as per specification no. FF-SPR./UP
38
-
17024
... More
32 mm NB ‘C’ Class
30
-
36450
... More
Providing water proof bedding for flooring of Toilet 25 -35 mm thick in C.M. 1:3 including using approved water proofing compound of Sunanda / Pidilite / Kerakol or equivalent in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering etc. complete.
28
-
12040
... More
Non Return Valve (Nrv)
12
-
8088
... More
S.S.Hood With Filter-Hoods Should Be Island Type Made Of 18 Swg S.S 304. Baffle Filters Should Be Made Of 19 Swg Border & 20Swg Filters. Should Be Fitted In Hoods. The Hood Should Have Light Arrangements. )Exhaust Cut Out And Spot Cooling Cut Outs (If Any) Should Be Made As Per Hvac Vendor Requirement. Proper Partition Should Be Given In Island Hoods. Proper Stifners Should Be Provided For Strengthening The Hoods Having More Than 2 Mtrs Length. All Hoods Drawings And Cut Out Should Made In Consulataion With Hvac Consulatant/Vendor. To Be Made In Ss 304-50" X32" X21"Ht
2
-
70632
... More
Breaking of RCC as per proposed drawing with Diamond precision cutting, hammer breaker and stacking the debris at designated area with in work premises.Contractor to use support props for beam and surround area before starting any breaking activities.stacking generated debris at designated place upto 15 meter from the work premises, contractor has to created space to collect the debris for further disposal, area should be covered with green hassian cloth, item completes as per direction engineer in charge.
5
-
37250
... More
Providing and fixing 10 cm PVC nahani trap with grating etc. complete.
5
-
2480
... More
SITC of Secondary Light Point.(Point Length will be Avg. 3Mtrs for first point to Second point .)
20
-
13200
... More
Hot Baine Marie With 5 Container With 3 Side Closed & 1 U/S-Top Made Of 16 Gauge S.S. Sheets To Be Duly Matt Finished. 25Mm X 25Mm X 3Mm Thick S.S. Angle For Framework. Top Is Provided With Hot Baine Marie With 5 Slots Of 1/1 Size Gn Pans Deep 6" With Lids. 2 Nos 3Kw Single Phase Power Connection. There Should Be Provision For Water Inlet & Outlet. The Inlet & Outlet Arrangement Of Plumbing Should Have A Ball Valve Assembly Fixed With The Bain Marie. Legs Should Be 1.5" In Square 16 Swg S.S Pipe/Legs Fixed With Adjustable Nylon Bullet Feet. To Be Made In Ss 304
1 Nos Of 18 Gauges S.S. Under Shelve.-72"X 26"X 34"Ht
2
-
174078
... More
Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.
510
-
97410
... More
Blower Vibration Pad
1
-
12312
... More
50 mm nominal outer dia Pipes
30
-
10950
... More
Immaculate+ : Recess Mounted 2ft x 2ft LED Luminaire with Diffuser 30 Watt
36
-
90000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements