Dr Babasaheb Ambedkar Marathwada University Tender

Removing Urinal Pans or Wash hand basin with frame including disconnecting the sanitary and water supply connections. removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials out side etc. complete. (Item No. 46.40)

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/including ponding test etc. complete.(Item No. 31.04)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every  third  course,  properly  bent  and  bonded  at  ends scaffolding, racking out joints and watering etc. complete. (Item No. 27.06)

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete (Item No. 32.03)

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.. (Item No. 33.68)

Providing and laying ceramic tiles of RAK/ Kajaria/ Nitco/ Asian or  equivalent  make  having  size  30  cm  x  30  cm  confirming I.S.15622/2006 (group D II­A)and 7 to 8 mm thick for flooring in  required  position  laid  on  a  bed  of  1:4  cement  mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. (Item No. 33.24)

Providing and laying ceramic tiles of RAK/ Kajaria / Nitco /Asian or equivalent make having size 30 cm. x 45 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. (Item No. 33.26)

Providing & Fixing 32 mm thick One piece single moulded puff ABSTRONE BUTADYNE STYRINE (ABS) Door shutter for internal use including toilets made up of outer ABS sheet of 1.2 mm thick having puff insulation of 35 to 40 Kg/Cum.density and 10 mm dia.for steel bars 2 Nos., wooden block to receive fixtures, having M.S. hinges 100 mm length, M.S. handles 150 mm length and 10 mm dia sliding door bolt etc. complete. (I.No. 39.80)

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. (Item No. 39.68)

Providing and applying putty to old plastered surfaces in two coats to receive approved paint in all positions including all materials,labour scaffolding and curing etc. complete (Item No. 36.17)

Providing and applying primer coat for internal wall surface & ceiling including scaffolding  to receive oil bound distemper treatment etc. complete.(Item No. 36.01)

Providing and applying plastic emulsion paint of approved quality, colour and shade to old & new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. (Item No. 36.12)

Providing and fixing coloured glazed earthenware Wash Hand Basin of 45 cm x 30 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. (Item No. 41.67)

Providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. supply pipe including necessary bend and socket complete. (Item No. 41.51)

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. (Item No. 42.33)

Providing  and  fixing  10cm  C.I.  Nahani  Trap  including  C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. (Item No. 41.80)

Providing and fixing precast RCC frames for doors / windows / louvered windows / ventilators of cross section 125mm x 50mm with two bars of 8mm for steel as reinforcement and compressive strength of 300kg/SQ.M. with wood like finish, having 3 Nos./6 No.s of 12 gauge GI pipes, embedded on vertical members for single/double leaf door shutter respectively for fixing hinges with 4 Nos. of 12mm diameter, hole/holes on horizontal top member for fixing tower folts 16mm diameter soils for aldrop and sliding door bolt of the shutter is single leaf, 3 No.s of split end tailed MS hold fast on each of the vertical members fixed in concrete block of 10cm x 10cm x 20cm in half brick wall and 23cm x 10cm x 20cm in one brick thick wall etc. complete. As directed by Engineer in charge.

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends,  tees,  single  junctions,  slotted  vent,  clamps  etc. complete (Item No. 42.52)

Providing and fixing in position unplasticized polyvinyl chloride (UPVC) ultra violet stabilized as show below outer diameter plumbing pipe 2mm thick, confirming to IS 4985 including necessary fitting such as PVC bend, tee, reducer, clamps, plug etc. including necessary excavation, trench filling or necessary drilling holes in walls, slabs & making good etc. complete. (Page no-188, Item no-673)

15mm Dia

25mm Dia

Providing  and  fixing  15  mm  diameter  PVC  Aqua  kraft  type Supreme make or equivalent make super bib tap with flange including all accessories etc complete (Item No. 43.33)

Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. complete. (Item No. 46.09)

Removing white wash or colour wash by steel wire brushing and / or scrapping by sand paper and preparing the wall surface smooth including necessary repairs to scratches etc. complete.As directed by Engineer in charge..DSR I.No.406 P.No.125.

Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc. complete.(Item No. 46.14)

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete. (Item No. 40.01)

Providing  and  fixing  in  position  (as  per  1868  /  1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer­ in­charge  with  all  necessary  Aluminium  sections  fixtures  and fastenings  such  as  roller  bearing  in  nylon  casting  and  self locking catch fitted in vertical section of shutter including 5 mm thick  plain  glass  and  aluminium  mosquito  net  shutter  with stainless  steel  jail  with  all  required  screws  and  nuts  etc, complete. With powder coating with box (Item No. 39.43)

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litre (Item No. 42.54)

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592­1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) (Item No. 42.85)

Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use (Item No. 43.23)

Providing and fixing European type Colour glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 liter enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) (Item No. 43.21)

C.C.Septic tank 1.20m dia.(2.5m long) (Sr No. 131)

Removing Shahabad or Tabdur stones from floor without bed concrete including stacking the materials as directed with all leads, lifts etc. complete. (Item No. 46.20)

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means. (Item No. 21.02)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. (Item No. 27.05)

Providing and laying in situ, cement concrete in M10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, compacting and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer, With natural sand. (Item No. 24.01)

Royalty against extraction of material such as metal, sand , murum, rubble, etc. for construction work.