Directorate Of Technical Education Tender

... More
The Directorate Of Technical Education has issued a formal invitation for competitive bids for Renovation Of 43 Restroom Facilities At Vjti Institute. in Mumbai, Maharashtra, with an estimated contract value of Rs. 3,51,06,063. The bid opening date for this tender is 28-05-2025 and the last date for bid submission is 16-06-2025. Interested bidders for Directorate Of Technical Education tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Directorate Of Technical Education Tender

Works
Civil And Construction
Building Construction
Eprocure
Opening Date28 May 2025
Closing Date16 Jun 2025
Tender Amount₹ 3,51,06,063 
Notes
Download

AI Insights

Bid Capacity
... View More
The formula for bid capacity is Assessed Available Bid Capacity = (A * N * 2 – B), where A is the maximum turnover in the last 3 years, N is the period of completion of work, and B is the cost of works in hand during the period of work under consideration.
Technical Capacity
... View More
The required prior work experience for the bidder includes experience in similar civil renovation works, especially toilet blocks or sanitary infrastructure. The experience requirements are as follows: - Minimum 5 years: 3 marks - 6 years: 4 marks - 7 years and above: 5 marks The bidder should have completed a single similar work of value: - ₹3 Cr – ₹4 Cr: 3 marks - ₹4 Cr – ₹5 Cr: 4 marks - Above ₹5 Cr: 5 marks Additionally, the bidder should have satisfactorily executed work of a similar nature, with the following options: - Three similar completed works, each of value not less than 40% of the estimated cost put to tender, i.e., amounting to Rs 119 lacs. - Two similar completed works, each of value not less than 60% of the estimated cost put to tender, i.e., amounting to Rs 178 lacs. - One similar completed work of value equal to or not less than 80% of the estimated cost put to tender, i.e., amounting to Rs 238 lacs. The similar works/experience refers to completed or ongoing projects involving repair/renovation/reconfiguration with fit-out of toilets, restrooms, incorporating cubicles, wooden partitions, electrical connections, and light fittings, and modern plumbing fittings. In case of ongoing works, the bidder must have received payment bills of 80% of the contract sum for the work executed. The value of completed works shall be brought to the current costing level by enhancing the actual value of work at a compound rate of 6% per annum.

Costs

  • EMD

    ₹ 1,48,755
  • Document Cost

    ₹ 2,360
  • Tender Fee

    ₹ 500

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

33

-

-

... More
Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete.

287

-

-

... More
Providing waterproof plaster in W.C. and bath 12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles) (As directed by Engineer in Charge)

1485

-

-

... More
Providing & applying anti corrosive treatment to exposed reinforcement portion of beam/ column with one coat of alkaline Rust converter feovert/ rusticide or equivalent on exposed reinforcement after celaning the surface with wire brush, followed by two coats of anticorrossive epoxy based two component zinc rich primer MasterEmaco P 130 of BASF phenolic IPNET RB/ Polyalk flxoprime or equivalent rebar protection coating on exposed reinforcement and concrete penetrating corrossion inhibitor EPCO KP-100/ POLALK EP 113/ Masterseal 1414 of BASF/ FOSROC or equivalent over adjoining concrete surfaced

115

-

-

... More
Providing & applying of bond coat approved epoxy resin master brace 1414 of BASF/ EPI bond of krishna conchem/ or equivalent before polymer plaster/ concrete to have the perfact bond between old concrete and new concrete/ polymer plaster surface within half and hour of after application of bond coat conforming to ASTM C 881 Type 2, using nylon brushes scaffolding labour etc. complete

115

-

-

... More
Providing & applying Ready mix polymer modified cement mortar of average thickness 15mm using polymer in one or more layers in proportion 1:5:15 of polymer cement quartz sand as manufacturers specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc complete

115

-

-

... More
Providing & applying Ready mix polymer modified cement mortar of average thickness 30mm using polymer in one or more layers in proportion 1:5:15 of polymer cement quartz sand as manufacturers specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc complete

115

-

-

... More
Providing and fixing on walls/ ceiling/ floor Concealed 15 mm dia. UPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

500

-

-

... More
Providing and fixing on walls/ceiling/floor Concealed 20 mm dia. UPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

500

-

-

... More
Providing and fixing on walls/ ceiling/ floor Concealed 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

500

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.