Directorate Of Municipal Administration Tender
... More
The DMA has issued a formal invitation for competitive bids for the Directorate Of Municipal Administration project, for Augmentation Of Existing Barshi Water Supply Scheme From Ujjani Dam - Phase Ii,dist Solapur Under Amrut 2.0 in Solapur, Maharashtra, with an estimated contract value of Rs. 2,47,43,98,934. The bid opening date for this tender is 03-02-2024 and the last date for bid submission is 04-03-2024. Interested bidders for Directorate Of Municipal Administration tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Directorate Of Municipal Administration - DMA Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date3 Feb 2024
Closing Date4 Mar 2024
Tender Amount₹ 2,47,43,98,934
Costs
EMD
₹ 1,23,71,995Document Cost
₹ 1,25,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_DMA_995854_1Bid Award Id
ViewTender No
202324_BNP_Water_Notice_08Tender Authority
Directorate Of Municipal Administration ViewPurchaser Address
-Website
http://https://mahadma.maharashtra.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Parishishta A and Affidavite on separate Rs 500/- stamps
BOQ Items
... More
17) UPS system Supplying, erecting, testing and commissioning of 2kVA capacity online pure sine wave, with backup time of 30 hrs. PWM & IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS
3
154296
51432.15
... More
ii) PCC O/G Feeder to Proposed PMCC-2 Incoming Panel ( 1 run)
240
225036
937.65
... More
Item No.12 :- LIFTING EQUIPMENTS
a) Chain Pulley Block
Providing, erecting triple spur gear type Chain Pulley Block suitable for capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as
per IS 3832 carrying ISI mark 2 T Capacity
1
21478
21478
... More
2) PH analyser
Design, Supply, Installation, Testing of pH analyser as per IUPAC( International Union for Pure & Applied Chemistry)at A.F. and Interfacing with PLC panel including mounting arrangement.
Range : 0 ‐ 14 ,
pH Accuracy : Better than 0.1% of full scale , Supply Voltage : 24V dc, Output : 4 ‐ 20 mA /HART
As per IEC 61000-6-2 & IEC 61000-6-3
4
418644
104661
... More
Item No 11
Providing double flange sluice valve
confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.
a) Sluice valves - PN -1.6 (Without by pass)
200 MM dia for isolation of Air Valve
11
255541
23231
... More
Item No 18
Providing and fixing steel ventilator fully glazed partly fixedas per detailed drawing with hot dip zinc coating including fabricating glazing with plain/ obscured glass pans and approved type quality and iron oxidised fixtures and fastening with guard bars 12mm square 10 cm c/c and oil painting 2 coats etc. complete. Spec. No.: Bd-T-53 Page No. 509 and As directed by Engineer-in-charge.
14.4
69509
4827
... More
5) Power Cable
Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU
300
34965
116.55
... More
During Second year (3% of total cost)
1
890505
890505.78
... More
During Sixth year (7% of total cost)
1
134899
134899
... More
Item No. 19:
Lowering, laying and fixing in proper alignment and position all types of C.I. Air Valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves).
Air Valve Double Ball Flanged Type - PN -1
a) 65 mm dia
3
1209
403.2
... More
Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edi-tion/revision with amendments for Rubber Gaskets. (IS:8329-2000 Latest Version)
b)400 mm dia
520
3339960
6423
... More
Item No 21
Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
45885.68
4047116
88.2
... More
Item No. 21: Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor.
a) 200 mm dia
0.96
12748
13279.35
... More
c) 300 mm dia, PN-1 For Paranda Road ESR Common Header Pump serving to Proposed MBR Pump serving to Subhash nagar ESR Pump serving to Subhash nagar ESR
Pump serving to Proposed Paranda Road ESR 1 & 2
8
356144
44518
... More
Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor.
b) 200 mm dia
0.74
9853
13279.35
... More
Item No 16
Lowering, laying and jointing in position
following C.I.D/F Reflex valves, Butterfly
valves and Sluice valves including cost of
all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc.complete. (Rate for all class of valves.)
c)Sluice valve 200 MM
46
179386
3899.7
... More
Subwork No 4 Approach Bridge Length - 130 m
Iotem No 1
Excavation in general in soft material comprising of soft soil, soft murum, sand, hard murum with boulders in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, Supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricating, gurading, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in- charge, etc. complete excluding refilling. For Head Works on river or dam submergence for initial lift of 0 to 1.5 M lift 0 to 1.5 m for footing of columns for bridge
529.2
245548
464
... More
ii) From MCC to 75 HP ATS Starter -2 & Starter to Pump
30
10206
340.2
... More
Item No 21
Valve Chamber
Providing Constucting the RCC Valve Chamber with Precast RCC Covers 1:3:6 proportion PCC bedding, excluding excavationn precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.
Note : Wall thickness : 0.20 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M.
As above of 3 x 2 M internal size and depth upto 2.5 M with precast R.C.C slab
cover.
11
2487936
226176
... More
b) Supplying and erecting 100 kVAr, 3 phase, 50 Hz., Power contactors Derated for microprocessor APFC controller with MPP / APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps of MPP / APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC For Existing WTP 19MLD
1
400547
400547
... More
Subwork No 9
RWGM DI Shedshinge Phata to Barshi WTP Item No 1
Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum,hard murum,soft rock and old cement and lime masonry foundation asphalt road,W.B.M. road,hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed removing the excavated material upto a distance of 50 metres , stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
147428.24
50701014
343.9
... More
Item No 10
Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M. S. angles as verticals at 1.5 M c/c, and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc. complete.
For parapet wall
260
238160
916
... More
Item No 6
Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete.
1000.1
870540
870.45
... More
b) Providing and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT
4
55121
13780.2
... More
Item No 9
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, inishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
Slab
16.87
168322
9977.63
... More
b) 350 mm dia, PN-1
1
27718
27718
... More
Item No 20
Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box.
Windows & ventilator
22.68
124263
5479
... More
34) Removing Existing Valves @ existing 19.5 & 8.5 MLD STP Sluice Valve 500 mm
6
23168
3861.48
... More
Subwork No 5
Raw Water Pumping Machinery
Automation Work of Jackwell Automation Work of WTP
Item No 1
Pump
Design, supply, erection, testing & commissioning of water lubricated type V.T. pump having following discharge, Head & total suspended length with CF8M /Bronze impeller, 1450 RPM complete with strainer, bowl assembly, column assy etc. motor stool / discharge head, sole plate with suitable ISMC frame etc. complete as per specifications. Raw Water Pumps
Discharge : 297 LPS Duty Head : 126 Mtr, 683 HP (2W+1S)
Total Suspended Length including bowl assembly : 24 Mtr
3
20908092
6969364
... More
lift 1.5 to 3 m for footing of columns for bridge
529.2
259837
491
... More
vi) Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system
lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI70, CCT upto 6500K,THD10%, p.f. 0.95, operating range of 140-270V, inbuilt
surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.
4
24969
6242.25
... More
Item No. 12:
Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum)
31.24
205627
6582.59
... More
Excavation in general in soft material comprising of soft soil, soft murum, sand, hard murum with boulders in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, Supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricating, gurading, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in- charge, etc. complete excluding refilling. lift 3 to 4.5 m from RL 483.00 to RL 481.500
858.83
444876
518
... More
c ) Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/
pipe as per specification no. CB-LT/AL
LDB Panel to EOT
30
5702
190.05
... More
Dismantling Joint
Providing, erecting and commissioning M.S.Dismantling joint as per requirement and Department's approved drawing andspecifications, including machining and rubberrings and suitable for 16 kg/cm2 working pressurewith required flanges of suitable size with nut boltset complete.The joint should have through longbolts so that during normal working pressure thereshould be no sliding movement of sliding flanges.L.O.F.(length over flange ) should not be less than75% of dia.
ii) 500 mm dia for Pump discharge Pipe
3
162078
54026
... More
c) 350 mm dia
8
14624
1828
... More
Item No. 15:
Providing sand face plaster externally in two coats using approved screened sand in all positions, including providing base coat of 15mm thick in cement mortar 1:4 mixing approved water proofing compound at the rate of 1 kg./ 50 kg. of cement and curing the same for not less than two days and keeping the surface of base coat rough to receive the sand faced treatment 8mm thick in cement mortar 1:4 and finishing the surface by taking out grains and curing for 14 days including preparing the surface, watering and scaffolding etc. complete.
161.4
109821
680.43
... More
iii) 300 mm x 100 mm
200
179340
896.7
... More
vi) 3.3 KV transformer Outgoing Panel To 3.3 KV Panel Incomer 1& 2 ( 2 Run)
250
637088
2548.35
... More
Item No 07 ;
Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M 150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attched)
200 to 400mm
4
27447
6861.75
... More
b) Actuator Panel Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil and over load element reverse & forwarding motor with necessary material and connected to supply, etc complete. Starter with original sheet steel enclosure.
1
63183
63183
... More
Item No 15
Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundation, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Tor Steel
4.89
475045
97206
... More
Item No 19
Providing internal cement plaster 20 mm. thick in two coats in ------------------------without neeru finish, to concrete brick surface, in all positions including scaffolding and curing complete. Spec. No.: Bd.L.4 Page No. 368 b) cement mortar 1:4
For pump house from inside
839.37
326868
389.42
... More
ii) Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete.
55.5
5944
107.1
... More
Item No. 19 : L.T. Panel (PMCC ) Designing, providing , fabricating, erecting commissioning and testing L.T. Panel board cubical type with equipment’s as per detailed specifications
1
321200
321200
... More
iv) 8 Pair X 1 Sqmm
300
199500
665
... More
Item No.21 : FCMA Soft STARTER inbuilt PF Capacitor Panel
Providing erecting and giving test and trial of FCMA fully Automatic, Starter with DOL Soft Starter complete with main Contactor, VAF meter , PLC and HMI , push buttons and indications,FCMA module with bypass contactor and its control circuitry with inbuilt PF Panel etc complete.
3
3108681
1036227
... More
Item No. 20 : Lighting Distribution Board
Designing, providing , fabricating, erecting commissioning and testing Lighting Panel board cubical type with equipment’s as per detailed specifications
2
67932
33966
... More
2) From Proposed 18.5 MLD WTP to Existing Mhada Colony ESR - 6 Lakh lit.
Discharge : 25 LPS Head : 35 MtrOperating Head Range :- 26-39 mtrMotor rating : 20 HP
2
128910
64455
... More
b) 450 mm dia
12
33408
2784
... More
300 mm dia D.I K 9.pipe- ( Outlet)
1
36471
36471
... More
Item No. 18:
Providing and laying polished shahabad Stone Flooring 25 mm to 30mm thick and required width in plain /diamond patter with black caddappa stone slab for border or any other design on a bed of 1:6 C.M or 1:1.5 lime mortor including cement float, filling joints,with neat cement slurry,curing,polishing and cleaning etc complete.
42
36683
873.42
... More
Item No 17
Providing and applying two coats of textured synthetic paint of approved shade and
quality and one coat of primer before applying textured paint including scaffolding
if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials
as required, etc. complete.
As per inside plaster
555.5
90546
163
... More
d) Girder Providinging structural steel work in rolled sections like joists, channels, angles, tees, etc.as per detailed designs and drawingsincluding fixing in position without connectingplates, braces, etc. and one coat of anticorrosivepaint and over it two coats of oil painting ofapproved quality and shade, etc. complete.(Bd-C2/275
9.82
732450
74618
... More
c) 50 mm dia i) On Common Header (Existing MBR) ii) On Common Header (Mhada Colony ESR) iii) On Common Header (Proposed Paranda Road ESR)
3
1203
401.1
... More
Item No 5
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, plywood form work,bully/steel prop ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted ) For RCC M-300 grade - all types of columns. Below GL
lift 0 to 5 m for columns
160
1554980
9718.63
... More
250 mm
1
2032
2032.38
... More
Lowering laying and jointing with SBR rubber gaskets C.I. S.S./D.I. Pipes of various classes with CI/MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-Charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour, giving hydraulic testing etc. complete.
Note : only SBR Rubber gaskets to be used
MS for DI K9 pipe
c) 450 mm dia
180
45549
253.05
... More
Item No. 18 :- CABLE TRAY
a) Providing & erecting Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet i) 150 mm x 75 mm
75
48353
644.7
... More
3) For Filter bed wash water inlet (For Existing 19 MLD WTP & 8.5 MLD WTP)
300 mm
12
437652
36471
... More
ii) External Electrification
i) Providing & erecting 6 m high (clear height) galvanised ctagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL
16
253126
15820.35
... More
7) Secondary work station PC
Windows based PC with latest configuration & OS complete with necessory office & antivirus softwares.
PC configuration shall not be less than Intel i5 10th Gen CPU, 16 GB Ram, 128 GB SDD, 500 GB HDD, DVD RW, Rs232 & Rs485 port, 2 RJ45 ports, Keyboard, Optical Mouse, 32 inch color TFT Monitor, Latest Windows Pro OS, Microsoft Office & Antivirus & Internet Sequrity software for 3 years license.
1
75000
75000
... More
Item No 12
Providing Second class Burnt Brick masonry with conventional / IS type bricks in cement mortar 1:6 in superstructure, including bailing out water manually, striking joints on unexposed faces, racking out joints, scaffolding etc. complete.
23.06
186531
8088.97
... More
Item No 13
Welding in all positions with required number of runs, for M.S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification.
Butt Joints Plate thickness18 mm
281.66
635251
2255.4
... More
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or asdirected by Engineer-in-charge including normal dewatering, centering,form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and
even surface wherever necessary or roughening if special finish is to beprovided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
lift 5 m to 10 m from RL 491.01 to RL 496.01
131.41
1480138
11263.6
... More
Item No 3
Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for PCC work below foundation and footing including normal dewatering,plywood form work, compaction, finishing and curing, etc, complete. PCC M 150 for lift 0 to 5 m
38.88
243870
6272.39
... More
Item No 2
Excavation in general in soft material comprising of soft soil, soft murum, sand, hard murum with boulders in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, Supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricating, gurading, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in- charge, etc. complete excluding refilling.Soft Strata
Lift 0.00 to 1.5 m
743.58
362272
487.2
... More
Item No 25
Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.
Jack Well Roof Top slab
301.72
354753
1175.77
... More
4) Scada system for Raw water pump House
Design, manufacture, supply, installation, testing and commissioning of SCADA System for pump house.
Windows based PC with latest configuration & OS complete with necessory office & antivirus softwares. PC configuration shall not be less than Intel i5 10th Gen CPU, 16 GB Ram, 128 GB SDD, 500 GB HDD, DVD RW, Rs232 & Rs485 port, 2 RJ45 ports, Keyboard, Optical Mouse, 32 inch color TFT Monitor, Latest Windows Pro OS, Microsoft Office & Antivirus & Internet Sequrity software for 3 years license.
SCADA Software of reputed company with developer & runtime license with minimum 256 number of Tags with following features & functions 1. Supervise real-time data in the form of graphical presentation
2. Control pumping processes locally or through Remote locations
3. Dynamic process Graphic, It should resemble the process mimic. SCADA should have good library of symbols so that develop the mimic as per required. When operator sees the screen he should know what’s going in plant.
4. Alarm summery & Alarm history, SCADA system must be able to detect, display, and log alarms and events. When there are problems the SCADA system must notify the operators to take corrective action.
5. Acquire real-time data as well as logs data with Real time trend & Historical time trend.
6. Web Connectivity, Real-time displays can be accessed on remotely attached PCs and notebooks using internet.
SCADA Programming shall be done so as operator can visualize and control complete pump house operation from operator desk. All important alarms & events shall be logged. All the data from field instruments & equipments shall be logged. There shall be provision to take reports in required formats of real time & historical data, events & alarms. There shall be provision of broadcasting messages, emails of reporting information.
There shall be provision of access security.
An Industrial grade Din rail mounting ethernet switch with 5 ports shall be provided. An Industrial grade modem with 4G/5G GSM connectivity shall be provided.
1
273000
273000
... More
External Lighting at Panel room & Transformer
350
66518
190.05
... More
Item No 2 Providing erecting Cast Steel/ Spheroidal Graphite (S.G) Iron D/F Sluice Valves / Butterfly Valves with jointing to pipe work (including all hardware and packing) water works quality, having non-rising spindle with hand wheel and without bypass arrangement, spindle of stainless steel as per requirement, inspection charges, transportation upto departmental store, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. excluding C. C. foundation / structural steel support.
For Rating Class 150 (Working Pressure 20 kg/cm2 and Test Pressure 30 kg/cm2) Sluice Valves. 500 mm Dia. CS-150 for Pump discharge Pipe
3
976889
325629.7
... More
30) Actuator Panel Supplying and erecting DOL starter Reverse & Forward to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil and over load element reverse & forwarding motor with necessary material and connected to supply, etc complete. Starter with original sheet steel enclosure.
i) for Filter Bed Panel for 20.5 & 19 MLD WTP
2
256886
128443
... More
From HT Panel to OLTC For Annuncition Window
40
24040
601
... More
60 HP
For Existing 8.5 MLD WTP
2
230532
115266
... More
b) 350 mm dia, PN-1 For Proposed MBR Common Header
1
78989
78989
... More
Murum bedding with available excavated stuff.
4325.27
381488
88.2
... More
Item No. 25 :- EARTHING
i) Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP
36
228879
6357.75
... More
Excavation in general in hard material comprising of soft rock, hard rock, Manjara rock, etc, by blasting / controlled blasting, chiselling as required in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in-charge, excluding refilling. lift 7.5 m to 9 m from RL 478.50 to RL 477.00
678.59
784445
1156
... More
5) For Filter bed Drain (For proposed 18.5 MLD & Existing 19 MLD WTP & 8.5 MLD WTP)
500 mm
6
692700
115450
... More
Item No 13
Providing M.S. bar mesh prepared out of 16 mm dia M.S. bar at 15 cm. c/c both ways, welded to flanged ring including tack welding of bars and fixing the same with nuts and bolts on open faces of outlet/inlet pipes in the sump or reservoir, etc. complete as directed by Engineer-in-charge.
M.S. Bar mesh around Air valve
26.4
50714
1921
... More
12) Surveillance System
Desiging, supplying, installing, commissioning & testing of CCTV IR water proof camera suitable for upto 100ft. with control key board, DVR, Hard Disk,cables, UPT transreceivers etc. complete with not less than following specifications 1. Four numbers of IP Camera with night vision functionality with range up to 30 meters. Camera construction shall be suitable for weather proof outdoor installation. 2. Eight Channe DVR withmetal body consturction, having software features of motion detect recording. 3. 3.5 inch 2 GB HDD 4. 8 port POE Switch 5. 32 inch LED Screen, Keyboard & mouse.
2
112000
56000
... More
Item No 3
RCC FOOTING
Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
Foundation M-250
10.13
80985
7994.63
... More
5. Plain round mild steel bars grade - I confirming to I.S,432 Part-I or high yield strengh deformed bars confirming to I.S. 1786 or I.S. 1139 shall be used, grade-II mild steel bars will not be allowed.
6. Irrespective of the type of foundation proposed in the design, one set of bracing be provided at the gound level.
7. These rates include providing, M.S. ladder for E.S.R's upto 2 lakhs liters capacity and providing sprial staircase for E.S.R. above 2 lakhs liters capacity.
8. Stagging shall have to be designed with stresses of M-250 for ESR. However all RCC construction should be done in M-300
9. These rates are including the cost of uplift pressure if any and entire dewatering during execution. In case of water logging area where water is struck at shallow depth extra provision of dewatering shall be made as per site condition.
-
-
-
... More
13) Air Conditioners Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as
per specification no. APAC/ WAC
1
58357
58356.9
... More
Item No. 10 :- DISMANTLING JOINT
Providing, erecting and commissioning M.S. Dismantling joint as per requirement and Department's approved drawing and specifications, including machining and rubber rings and suitable for 16 kg/cm2 working pressure with required flanges of suitable size with nut bolts etc complete. The joint should have through long bolts so that during normal working pressure there should be no sliding movement of sliding flanges. L.O.F. ( length over flange ) should not be less than 75% of dia.
a) 450 mm dia, PN-1
1
44784
44784
... More
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or asdirected by Engineer-in-charge including normal dewatering, centering,form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and
even surface wherever necessary or roughening if special finish is to beprovided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
Panel floor slab RL 501.50 m
15-20 m lift
50.64
674070
13311.55
... More
c) 300 mm dia, PN-1 For Paranda Road ESR Common Header Pump serving to Proposed MBR Pump serving to Subhash nagar ESR Pump serving to Proposed Paranda Road ESR 1 & 2 Pump serving to Proposed MBR Pump serving to Subhash nagar ESR Pump serving to Proposed Paranda ESR 1 & 2
15
79049
5269.95
... More
e) 3 Core, 50 Sq.mm XLPE AL armoured cable
i) From MCC to 75 HP ATS Starter -1 & Starter to Pump
30
10206
340.2
... More
9) PLC with HMI for sand filter ( with 2 Filter beds )
Design, manufacture, supply, installation, testing and commissioning of indoor type PLC panel of size approx. 1200 mm X 700 mm X 1500mm (LBH), fabricated out of min. 2 mm thick CRCA sheet powder coated to Siemens gray color.
The Panel shall be provided with reputed make PLC with following accessories as well as input output configuration. The PLC shall be programmed with IEC 61131 standards for control, monitoring and communication of equipments & instruments at WTP Plant (sand filter bed wasing & operation).
PLC shall have Ethernet port & protocal for Modbus TCP communication with following IO DI –40 num DO – 40 num AI –16 num AO – 12 num 10 inch color TFT HMI complete with programming shall be provided to interact with PLC The panel shall include all the accessories (not limited to following) to achieve purpose of smooth & trouble free operation of sand filters (sand filter bed wasing & operation). MCB 10A DP – 1 num MCB 4A DP – 4 num 24 VDC Power Supply 10A – 1 num Push Buttons – 30 num Selector Switch -15 num Control Contactor – 15 num Annunciator with 12 Windows NO to NC Type Electronic Hooter – 1 num Control Transformer – 1 num Emergency PB – 1 num Panel Cooling Fan – 1 num Panel Light with Door Switch – 1 num Control Indication Lamp – 15 num Wiring + TB etc – 1 lot Hardware – 1 lot
1
277700
277700
... More
29) Other Accessories
Operator work station with Furniture Desk, Storage cupboards, Chairs etc complete.
1
328960
328960
... More
e) 350 mm dia
1210
5402650
4465
... More
Item No. 24: Providing and laying in situ Ready Mix Cement Concrete grade of trap / granite / quartzite / gneiss metal for RCC works in foundation like raft, grillage, strip foundation and footing of RCC column and steel stanchions including normal dewatering, form work, compaction, finishing and curing including transporting from mixing plant upto distance of 25 km., pouring the concrete at work site for 1.5 M lift above G.L. and 5.0 M lift below G.L., etc. complete.
(Excluding reinforcement and structural steel)
In RCC M-300
139.93
1213232
8670.28
... More
Item No 26
Providing, Erecting and Commissioning Multifunction Smart Valve External body is liner tubular in nature fabricated out of M.S. IS 2062. The main control flap in dishend form made of M.S. ( IS – 2062 or equivalent ) provided with O ring sealing. Hydraulic control unit connected to disc with a shaft ( En 8 or equivalent ) shaft with bearings or bush type in Gunmetal or Brass only. MAIN CONTROL FLAP & CONTROL UNIT. Main control unit consisting of a hydraulic unit connected by a shaft to the main flap. The control unit generate variable closure rates in different closing angles. MATERIAL OF CONSTRUCTION. a)Body, Disc :- M.S. I.S. 2062 b) Seal Ring :- Nitrile or Neoprene c) Shafts and hinge Pins :- En 8 or Equivalent d) Bushes & Bearings :- Brass or Gunmetal Valve is provided with suitable Zinc rich Epoxy primer Coat and Epoxy paint coat for weather protection.
For 800 mm Dia
10
24591166
2459116.6
... More
d) 200 mm dia, PN-1
4
49160
12290
... More
ii) Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x 95 sq. mm. with necessary material as per specification no. CB-JT/HT
4
36368
9091.95
... More
Item No. 2 :- SUBMERSIBLE MONOBLOCK PUMP Designing, providing erecting, testing & commissioning of submersible monoblock pump set of Pump discharging water against a total head as below with all accessaries, base frame, foundation bolts and required c.c. foundation etc. complete as directed by engineer incharge etc. complete.
1) From Proposed 18.5 MLD to Existing MBR - 4 Lakh lit.
Discharge : 34 LPS Head : 27 Mtr
Operating Head Range :- 20-30 mtr
Motor rating : 20 HP
2
128910
64455
... More
iii)Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
750
73238
97.65
... More
Making transformer plinth (1.5 x 1.5 x 1.5) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly plastered by 12 mm thick including watering etc complete.
2
30034
15017.1
... More
v) Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI80, CCT of 6500K and THD=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.
32
37430
1169.7
... More
Item No 14
Providing internal cement plaster 12mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete or brick surface in all positions including racking out joints, scaffolding and curing complete.
555.5
156900
282.45
... More
Item No 17
Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
13363.9
1122567
84
... More
Excavation in general in soft material comprising of soft soil, soft murum, sand, hard murum with boulders in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, Supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricating, gurading, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in- charge, etc. complete excluding refilling. lift 1.5 to 3 m from RL 484.50 to RL 483.000
923.63
453503
491
... More
Item No.15 : D. G. SET 1500/3.3 KVA
Supplying, erecting and commissioning ofdiesel generating set with alternator of 1500kVA output continuous rating, 3 phase,3300 V,50c/s 0.8 p. f. A.C a totally enclosed air cooled/ liquid cooled multi-cylinder diesel enginedeveloping suitable BHP at 1500 rpm with10% overload for 1 hour in 12 hours, alongwith standard accessories, self-excited,self-regulated, screen protected alternator withstatic excitation system running at 1500 RPMas per IS 4722- 2001 with voltage regulation+/- 5 %. Both the engine and alternator directcoupled on a common fabricated steel baseframe and mounted on anti-vibrating pads withstandard control panel comprising of meters,switchgears, indicators connected withsuitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWGCRCA Sheet, sound absorbing material torestrict sound level upto 75 dB at 1.0 m,provided with first filling of oil, diesel etc. and obtaining necessary approval from Electrical Inspector as per specification .including NGR+ NIS Panel,Control Panel ,Metering & protection panels + AMF Panel + Exhaust Pipe for DG Set as per MPCB norms etc
1
21301128
21301128
... More
Vibration Transmitter cable for 3 pump
200
34600
173
... More
Item No. 21 : Metering Cubical
a) Supplying, erecting, testing, commissioning 11 KV HT metering cubical (compact type) approved by MSEDCL/licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle and channel, painted with powder coating / epoxy paint of required shade copper bus bar size 25x6 mm electronic security lock and heavy duty mechanical lock, with counter meter for measuring no of times the opening of doors, top side cover (CT,PT cover) interlock with meter doors, epoxy coated 3 nos CT having required ratio between 75/5 A to 100/5 A, VA10,class0.2S, 11000/V3/110/V3 VA 50, class 0.2 epoxy terminal block suitable for provided trivector meter, and provision for incoming and outgoing cables etc. complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation
1
178892
178891.95
... More
Item No. 22 :- EARTHING
i) Providing & fixing Galvanised G.I. plate earthing complete with excavation, layers of charcoal and salt, earth lead, earthing chamber with funnel,corner etc. as per IE rules.
36
206993
5749.8
... More
Item No. 21:
Disposal of surplus excavated materials upto specified lead and all lifts including loading, unloading, stacking and spreading as directed by Engineer-in-Charge etc. complete Lead beyond 2.0 km but Upto 5.0 Km
709.23
255358
360.05
... More
vi) For Paranda Road Rising Main 400mm
1
348030
348030
... More
During Fourth year (7% of total cost)
1
2077846
2077846.82
... More
h) 3 Core, 1.5 Sq.mm CU PVC/ XLPE armoured Cable
250
32500
130
... More
b) 250 mm dia.
2
858590
429295
... More
Item No 30
Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
100078.33
8826908
88.2
... More
iii) From MCC to 75 HP ATS Starter -3 & Starter to Pump
30
10206
340.2
... More
15) Cable Tray Cover
Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary
800
295200
369
... More
Item No 6
Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263)
86.4
7257
84
... More
Item No 15
Providing double flange sluice valve
confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc.
complete. a) Sluice valves - PN -1.6 (Without by pass)
200 MM for isolation of Air Valve
46
1068626
23231
... More
Item No 20
Lowering, laying, jointing in position following CIDF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves )
Scour Valve
200 mm
11
42896
3899.7
... More
Item No. 11a :-M.S. PIPES & SPECIALS
Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.
18517
1759115
95
... More
Excavation in general in hard material comprising of soft rock, hard rock, Manjara rock, etc, by blasting / controlled blasting, chiselling as required in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in-charge, excluding refilling. lift 10.5 m to 12 m from RL 475.50to RL 474.00
570.2
691085
1212
... More
Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edi-tion/revision with amendments for Rubber Gaskets. (IS:8329-2000 Latest Version)
c) 450 mm dia
180
1407060
7817
... More
Item No 17
Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For
Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary
131.9
38910
295
... More
Item No 8
Providing and casting in situ Cement Concrete of trap/ granite / quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineerin charge ncluding normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement
Columns
21.26
204855
9635.7
... More
Item No 28
Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundation, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Tor Steel
25.37
2589524
102066.3
... More
Notes:
1. The design of the structure be in accordance with relevent (I.S.3370 - 1965 or revised)
2. The design shall satisfy the stipulation as per IS 1893-1984 and I.S. 13920/1993 for seismic focrce and I.S.- 11682/1985 for R.C.C. staging of overhead tanks.
3. For design having more than 6 columns, Providing of internal bracing is obligatory,. External bracking is also obligatory.
4.The entire structure shall be in M 300 mix only.
5. Plain round mild steel bars grade - I confirming to I.S,432 Part-I or high yield strengh deformed bars confirming to I.S. 1786 or I.S. 1139 shall be used, grade-II mild steel bars will not be allowed.
6. Irrespective of the type of foundation proposed in the design, one set of bracing be provided at the gound level.
7. These rates include providing, M.S. ladder for E.S.R's upto 2 lakhs liters capacity and providing sprial staircase for E.S.R. above 2 lakhs liters capacity.
-
-
-
... More
Item No 5
Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263)
12
1008
84
... More
During Third year (5% of total cost)
1
96357
96357
... More
e) 150 mm dia, PN-1
5
60625
12125
... More
d) 300 mm dia
40
142840
3571
... More
Lowering, laying and jointing in position following C.I.D.F Reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. (Rate for all class of valves.) Note: Only 75% rate is payable till satisfactory hydraulic testing is given.
i) Sluice Valves
e) 350 mm dia
1
6494
6494.25
... More
g) 4 Core, 4 Sq.mm PVC/ XLPE AL armoured Cable
200
28350
141.75
... More
Item No 3
Providing and supplying ISI standard DI specials and fitting with seal rubber gasket of SBR complete with cast iron follower gland and MS nut bolt coated or otherwise protected from rusting and suitable for DI pipes including cost of labour materials and transportation to store/site,loading unlaoding exluding GST levied by GOI and GOM in all respect,complete as per IS -9523 .For all type of specials, bends and tees etc. For all types of specials ,bends tees etc .
300 mm to 500mm dia
300
55800
186
... More
Item No 10
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, inishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
Slab
98.03
978106
9977.63
... More
c) 150 mm dia, PN-1 Pump serving to Existing MBR Pump serving to Mhada Colony ESR
4
41004
10251
... More
From DG to .415 Kv LT Panel DG MCCB I/C
80
63336
791.7
... More
2) For Filter bed water outlet (For proposed 18.5 MLD & Existing 19 MLD WTP & 8.5 MLD WTP)
300 mm
24
2657880
110745
... More
200 MM for isolation of Air Valve
2
46462
23231
... More
Item No 11
Dewatering charges for estimation purpose for head works in river basin or dam
Approach Bridge
130
108420
834
... More
c) Supplying and erecting 40 kVAr, 3 phase, 50 Hz., Power contactors Derated for microprocessor APFC controller with MPP / APP type capacitor with 525
V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps
of MPP / APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC
For Existing WTP 8.5 MLD
1
283552
283552
... More
From LT Panel to DG Battery Charger Supply
40
6920
173
... More
Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.
a) Sluice Valves PN 1.0 (Without by-pass arrangement)
b) 200 mm dia
1
18581
18581
... More
Item No. 3: Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by echanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a
distance of 50 metres beyond the area and
lifts as below, stacking as directed by
Engineer-in-charge, normal dewatering,
excluding backfilling, etc. complete by all
means. (Bd-A-6/259)
For Lift 0 to 1.5 m
17.64
19299
1094.1
... More
Item No 11
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing theformed surfaces with C.M. 1:3 of sufficient minimum hickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
Chajjas
4.01
40046
9986.63
... More
Item No 5 a
Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete.
23.42
19411
829
... More
Item No 7
Providing and casting in situ C. C. of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, plywood form work,bully/steel prop ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finssh is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use fo L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted .)
Excluding M.S. or Tor reinforcement. For RCC M-300 grade Slabs / Landings / Vertical Walls / Waist Slabs / Steps for StaircaseMain slab for bridge and parapet wall for lift 10 to 15 m
266.5
3274645
12287.6
... More
v)Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per
specification no. EA-EP
16
25200
1575
... More
Item No 5
Providing and casting in situ Cement Concrete of trap/ granite / quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineerin charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
Column pump house
41.59
485039
11662.4
... More
c)Sluice valve 200 MM
2
7428
3714
... More
b) 350 mm and above dia
1277
237522
186
... More
Gates shall be provided with electric actuators of suitable rating. The electric Valve actuators totallyenclosed, weather-proof and dust proofconstruction with IP-67, protection class suitablefor installation in any position without lubrication,leakage or other operational difficulty with specialgrease filled gear box and hand wheel foremergency manual operation which willautomatically dis-engage on restoration of powerto motor and with 10 watt single phase spaceheater and contineous local mechanical positionindicator and individually replaceable counter gearassembly and with two torque and four limitswitches with S.S. flap and operated with geardriven cams and of rating 250 Volt, 5 Amp, AC/DC, torque switch dial and with TEFC squirellcage induction motor working on 440 Volts +/-10%, 3 phase, 50 Hz AC of intermittent duty ratingS-2, insulation class "F" and temp rise restrictedto class "B" with IP - 67 protection class suitablefor DOL starting and with three thermostat and 30% over load margin. The torque rating of reductiongear box shall be atleast 1.5 times max. torque required for opening and closing of valve with integral starter for ON & OFF.
1.5 Mtr (W) x 1.20 Mtr. For Inlet of Jackwell
1
739902
739902.4
... More
4. Alarm summery & Alarm history, SCADA system must be able to detect, display, and log alarms and events. When there are problems the SCADA system must notify the operators to take corrective action. 5. Acquire real-time data as well as logs data with Real time trend & Historical time trend. 6. Web Connectivity, Real-time displays can be accessed on remotely attached PCs and notebooks using internet. SCADA Programming shall be done so as operator can visualize and control complete pump house operation from operator desk. All important alarms & events shall be logged. All the data from field instruments & equipments shall be logged. There shall be provision of broadcasting messages, emails of reporting information. There shall be provision of access sequrity An Industrial grade Din rail mounting ethernet switch with 5 ports shall be provided. An Industrial grade modem with 4G/5G GSM connectivity shall be provided.
-
-
-
... More
x)Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF
2
11393
5696.25
... More
NRV Valve
800 mm
5
72486
14497.35
... More
e) Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
For Internal lighting
100
14175
141.75
... More
Item No 2
Excavation in general in hard material comprising of soft rock, hard rock, Manjara rock, etc, by blasting / controlled blasting, chiselling as required in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in-charge, excluding refilling. For Head Works on river or dam sub mergence for initial lift of 0 to 1.5 M lift 6 m to 7.5 m from RL 480.00 to RL 478.500
736.31
830561
1128
... More
Subwork no 7 RWRM Jackwell to Shedshinge Phata 800 mm Item No 1
Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum,hard murum,soft rock and old cement and lime masonry foundation asphalt road,W.B.M. road,hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed foundation and excluding backfilling, etc. complete
65520
21117620
322.31
... More
Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor.
b)400 mm dia
0.52
14577
28033.95
... More
g) 1000 mm dia for FM at Gravity main Near WTP :
1
163960
163960
... More
providing and fixing accessories such as Stainless steel ladder inside and M.S. ladder with G.I. railing outside, C. I. manhole frame and covers water level indicatiors, lightening conductor, G. I. pipe railing around walk way and top slab, providing spiral staire case from ground level to roof level, M.S.Grill gate of 2 Mtrs height with locking arrangement, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of acrylic emulsion with silicon additives paint to the structure including roof slab and epoxy paint to internal surface & anti-termite treatment for underground parts of the structures and giving satisfactory water tightness test as per I.S. code, The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-charge.
Notes:
1. The design of the structure be in accordance with relevent (I.S.3370 - 1965 or revised)
2. The design shall satisfy the stipulation as per IS 1893-1984 and I.S. 13920/1993 for seismic focrce and I.S.- 11682/1985 for R.C.C. staging of overhead tanks.
3. For design having more than 6 columns, Providing of internal bracing is obligatory,. External bracking is also obligatory.
4.The entire structure shall be in M 300 mix only.
-
-
-
... More
Providing and making flanged joints to flanged C.I./M.S. pipes of all classes/specials etc. including cost of all jointing materials (rubber packing, nut bolts, etc.), labour, hydraulic testing etc. complete.
b) 750 mm dia
16
76672
4792
... More
22) Ultrasonic level transmitter
Designing, Supplying, Installing, commissioning & testing of Ultrasonic level transmitter CE marked with following technical parameters at pure Water Pump House and Interfacing with PLC panel including Mounting accesories. Range- 0 - 5 mtrs Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4" LED Accuracy - +/- 0.25% of Full Scale or better Temp.- With Inbuilt temp compensation Enclosure- IP 68 weatherproof Mounting - Top/above FSL of Tank
3
156993
52331
... More
vii) Supplying and erecting street light Wall bracket made from 40 mm. dia ‗B‘ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB
4
3452
863.1
... More
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or asdirected by Engineer-in-charge including normal dewatering, centering,form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and
even surface wherever necessary or roughening if special finish is to beprovided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
lift 0 m to 5 m from RL 485.00 to RL 486.010
38.34
392610
10239.63
... More
20) Level Transmitter Designing, Supplying, installing, commissioning & testing of Ultrasonic level transmitter CE marked at each filter bed with following technical parameters Interfacing with PLC panel including mounting arrangement. Range- 0 - 5 mtrs Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4" LED
Accuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68
10
523310
52331
... More
c) 3.5 Core, 150 Sq.mm XLPE AL armoured cable
i) PCC O/G Feeder to Proposed PMCC-1 Incoming Panel ( 3 run)
360
337554
937.65
... More
Scour Valve
500 mm
1
9194
9194
... More
4) For Filter bed Air inlet (For Existing 19 MLD WTP & 8.5 MLD WTP)
150 mm
12
123012
10251
... More
Item No 16
Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete.
101.32
16515
163
... More
Item no 2
Providing and laying in situ following grades of Plain Cement concrete of trap/ granite/ quartzite/gneiss metal for foundation and bedding including normal dewatering, form work, compaction and curing, etc, complete. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)
PCC M150
6.18
38763
6272.39
... More
13) Signal Cable
Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing of as per IS 694 copper shielded, twisted, multi stranded armoured cable on wall in GI tray or on ground.
i) 2 Pair X 1 Sqmm
300
59700
199
... More
18) Full-Bore Electromagnetic Flow Meter Supply, install and commission Electromagnetic Flow Meter (EMF) As Per ISO 4064, for Raw/Pure water with accuracy +/-0.5% of measured value & protection as per given specifications for size 100 mm-1000mm including sensor, transmitter surge arrestor, cable GI duct if suitable size for 25 mtrs built in GSM ( with Simcard and its charges,valid for 36 months) including the pipe cutting, leveling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee etc complete, as may be required at site & based on technical specifications.
Mandatory Accessories:
1) The sensor should be as per IP-68 protection & with flanges of PN 10 rating from CS-1 No.
2) The sensor coil housing shall be IP-68.This protected against external magnetic field.
3) The transmitter shall have one current 4 m A-20 mA output.
4) The current output shall be galvanically / optically isolated. transients without damage. It shall be fitted with switched mode power supply capability 85-260 V & 45-65 Hz to cope up with power transient without damage
5) Signal & power cables shall be of 50 Mtrs length/each.
6) Conduit pipe ( PVC Plumbing schedule 4 ) 25 mm diameter with suitable rating of cable with digging, laying & concealed the duct - 25 mtrs/each
7) UPS working on 230 V AC, 50 Hz power supply suitable for 12 hrs continuous operation-1 No.
8) Data storage capacity with built in or separate for date time, actual flow rate, totaliser & error messages if any with storage capacity of 120 days -1 No.
9) Proper earthing shall be provided for protection against high voltage surge.
10) Suitable over voltage protection unit for protection of instrument from higher voltage (upto 275 V-300 V AC)
11) Fixing flow meter transmitter to internal walls of buildings in a suitably designed panel cabinet with proper locking arrangement with glass window on front door for seeing the readings of flow transmitter and data logger without opening of the panel cabinet. electrical power supply from near by apparatus. The panel cabinet shall be It should house complete ancillaries and including the provision for connection of prewired and with suitable gland entries.
iii) Subhash Nagar ESR Rising Main 500 mm
1
432332
432332
... More
b) 75 HP Motor For Subhash Nagar ESR (2W+1S)
3
1141638
380546
... More
Subwork No 15 - Pumping Machunery at Pure Water Sump
Item No. 1 :- V.T PUMP Providing, installation, commissioning & testing of Vertical Turbine self water lubricated Pump capable of below mentioned discharge at the suitable duty point head of including Seamless Steel column pipe manufactured from ERW pipes 10 mm thick each of length provided as per manufacturer std. with suitable dia. MS base plate connecting stool & stainer etc. all line shaft of stainless steel ASI410, Impeller of CF 8M, Pressure gauge including all consumable materials with necessary tubing and pump assembly from discharge head to strainer shall have to be connected with MS nut & bolts of TVS/Fit Tight complete as per detailed specifications and as directed by Engineer in charge
Pure Water Pumps
1) From Proposed 18.5 MLD WTP to Proposed MBR - 8.1 Lakh lit.
Discharge : 118 LPS Duty Head : 34 Mtr
Operating Head Range :- 26-38 mtr
Motor rating : 100 HP (1W+1St.by)
2
2995762
1497881
... More
vii)Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
16
2906
181.65
... More
HT Substation
Item No 1
Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc.
complete.
For Foundation depth 1.5 m
For Lift 0 to 1.5 m
216
32400
150
... More
5. Clarifier
Horizontal flow circular tank, detention period 2-5
hours, overflow rate 30 cubic metre per square
metre per day (to be specified), Weir loading not
more than 300 cubic metre per metre per day, with mechanical sludge scraper conforming to I.S. No. 10313 -1982 with necessary inlet arrangements.
6. Rapid Sand Filters and Filter House
Filter designed for filteration rate of 5,000 liters
per square metre per hour, minimum 2 beds for
plant upto 10 MLD, for larger plants as specified,
filters to be located in filter house with roof slab, pipe gallery and platform minimum 5.5 metre in width with constant rate filtration or declining rate
filtration. All valve shall be glandless.
7. Chemical House in Two Storeys
a)Ground floor to accommodate 7 days alum requirement and sundry storage (Minimum 4 m height)
b)First floor to accommodate alum and lime tanks. chain pulley block etc. (min. 5 m height)
c) Solution tanks Minimum 3 tanks (one for preparation. second for dosing and third as standby), each tank capable of giving 8 hours maximum dose without interruption, minimum free board 0.30 M, trays for dissolving, level indicator, mechanical agitation devices, solution feed and drain lines, solution feed device (constant head device,strength of solution upto 10% only) conforming to I.S. 9222 part-I/1979.
-
-
-
... More
c) H.T. Panel 3.3 KV Designing, providing, fabricating, erecting commissioning and testing H.T. Panel board cubical type ,Vacuum Circuit Breaker panel Indoor type including CT of required ratio for metering and protection including 3 O/C and E/F relay and high speed trip relay. with equipment’s, multifunction meter RS 485 Port ,Electromagnetic relay ,auxiliary relay & Automatic semaphore indicator relay and base frame made of ISMC 100x75 mm as per detailed specifications 11 KV system, 630 Amp, 25 kA Vacuum Circuit Breaker panel
3.3 KV system, 630 Amp, 25 kA Vacuum Circuit Breaker panel & Vacuum Contactor Panel
1
3380656
3380656
... More
Dia of pipe : 800.00 mm DI K9
1115
20936355
18777
... More
Item No 15
Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete
a) MS specials of 18mm thick
(5% of the total length assumed i.e. 207 rmt x 5% = 20.7 RMT)
5969.74
567125
95
... More
Item No. 4:
Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.
a) Sluice Valves PN 1.0 (Without by-pass arrangement)
a) 200 mm dia
1
18581
18581
... More
Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 40 kVA up to 50 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc
1
91062
91062.3
... More
b) Supplying and erecting HT CT multifunction DLMS compliance of accuracy of class 0.5 , 3x63.5V,50 Hz with optical & RS 232 port, backlit LCD, measures kWh, kVAh, V, I, kW, 6 months history of energy , load survey,
& displays trivector energy, load survey, TOD, tamper detection & logging, power ON /OFF events, stantaneous parameters of rating 1/5 A with display in
absence of power complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box.
1
13567
13567.05
... More
c) Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT
5
54989
10997.7
... More
Lowering, laying and jointing in position following C.I.D.F Reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. (Rate for all class of valves.) Note: Only 75% rate is payable till satisfactory hydraulic testing is given.
i) Sluice Valves
b)400 mm dia
1
7835
7835.1
... More
Sluice valve
800mm
1
418068
418068
... More
Item No 22
Providing sills & jambs of polished Kota stone 25mm to 30mm thick, on a bed of C.M. 1:4 including neat cement float, filling joints with cement slurry, curing, polishing, rounding edges, cleaning complete.
43.13
55594
1289
... More
Item No 21
Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box.
Windows & ventilator
45.9
251486
5479
... More
Item No 27
Providing and fixing in position copper lightening conductor including copper rod of 20 mm dia as per upper terminal 1.5 M long with a knob at end and with conical spike at top, copper tape conductor 20 x 3 mm size, copper earth plate of 3 mm thick and 0.81 sqm. in area, clamps at 1 M centre to centre including, necessary excavation, laying and fixing the conductor, providing and fixing 40 mm G.I pipe upto 3 M height from ground and 0.5 M below ground including making all connections, filling the earthing pit with charcoal, salt, etc. and refilling and watering, etc. complete as per specifications laid down in relevent I.S. codes.
i) For Tape of 10 M length
2
27086
13543
... More
Item No 9
Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundation, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete.
21.85
2230046
102066.3
... More
c) 150 mm dia.
1
254289
254289
... More
Item No. 10: Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263)
203.72
17967
88.2
... More
Item No. 3: Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.
c) Double flanged specials of all diameters.
e) Plain ended specials or plain ended branch flanged specials of all diameters.
319
30305
95
... More
Item No. 20: Lowering, laying and fixing in proper alignment and position all types of C.I. Air Valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves).Air Valve Double Ball Flanged Type - PN -1
b) 80 mm Dia
2
961
480.9
... More
Item No. 8:
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum hickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
9.72
94727
9745.62
... More
During Fifth year (7% of total cost)
1
134899
134899
... More
Lowering laying and jointing with SBR rubber gaskets C.I. S.S./D.I. Pipes of various classes with CI/MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-Charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour, giving hydraulic testing etc. complete.
Note : only SBR Rubber gaskets to be usedAbstract for DI K7 pipe
e) 350 mm dia
1210
254100
210
... More
From LT Panel to PLC Panel Supply
30
5190
173
... More
Labour Part
Item No. 8:
Excavation for Pipe trenches/ all types of foundation in earth, soils of all types such as sand, gravel, soft murum, hard rock and concrete road by chiselling, wedging, line drilling, by mechanical means or by all means other than blasting including trimming and levelling the bed including removing the excavted material up to distance of 50m beyond the construction area, stacking and spreading as directed, including all lifts preparing the bed for bed concrete / foundations etc. complete including heavy dewatering either manully or mechanically by all means up to any extent including shoring and strutting etc. complete.
2068.5
1079881
522.06
... More
iii) 4.5 Pair X 1 Sqmm
200
74400
372
... More
Item No 13
Providing and fixing in position C.I. /M.S. rose pieces in intake wells including cost of all materials and labour, painting with three coats of anti-corrosive oil paint, etc.complete as directed by Engineer-in-charge.
172.54
17254
100
... More
Item No. 10: Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263)
41.54
36161
870.45
... More
Item No 3
Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for PCC work below foundation and footing including normal dewatering,plywood form work, compaction, finishing and curing, etc, complete. PCC M 150
For lift 10 to 15 m RL 473.50to RL 474.00
173.18
1303514
7526.9
... More
Excavation in general in hard material comprising of soft rock, hard rock, Manjara rock, etc, by blasting / controlled blasting, chiselling as required in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in-charge, excluding refilling. lift 9 m to 10.5 m from 477.00 to RL 475.50
623.21
737886
1184
... More
Tor Steel
3.17
307754
97206
... More
Item No 17
Providing and fixing in position anodised (as per TI.S.1868/1982) aluminium sliding window of three tracks with rectangular pipe having overall dimension 95 x 38 x 0.90 mm at weight 0.637 Kg/Rmt. and window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.07 Kg/Rmt. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 1 Kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kg/Rmt. And handle section 40 x 18 x 2 mm at weight 0.417 Kg/ Rmt and top section 40 x 18 x 1.25 mm at weight 0.417 Kg/Rmt.as per detailed drawing and as directed by Engineer-In-Charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and alluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc. complete. Spec. : As directed by Engineer-in-charge. iii) With colour anodising with box
30
164370
5479
... More
Subwork 11 -PROVIDING CONSTRUCTING 18.50 MLD WATER TREATMENT PLANT Item No.1 -Designing (aesthetically), providing and constructing and commissioning Conventional Water Treatment Plant consisting of all Civil, works including cost of Providing and applying Epoxy paint to inside surface of water retaining structures in contact with chlorine and providing anti - termite treatment to entire structure below Ground level, ceramic tiles for floring, Acrylic emulsion with silicon additives paint from outside. stainless steel railing, Mechanical and Electrical components of variours sub-works as given below : including necessary hydraculic testing, structural testing equipment testing, trial run for a period of 3 months, etc. complete as directed by Engineer-in-charge (turn-key job).
1. Aeration Fountain
Plan area not less than 0.625 square metre per
MLD2. Ventury Flume
With necessary devices, consisting of simple
mechanical indicator. ( Pedestal type gauge)
3. Flash Mixer
Rapid mixing device, detention time 60 seconds to give velocity gradient 300 to 400 sec-1 vane mixer type confirming to I.S. 7090 of 1985
4. Flocculator
Confirming to I.S. 7208 of 1974 (Type-C) with
detention period of 30 minutes.
-
-
-
... More
2) For Filter bed water outlet (For Existing 19 MLD WTP & 8.5 MLD WTP)
300 mm
12
437652
36471
... More
Item No 7
Providing and casting in situ Cement Concrete of trap/ granite / quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineerin charge ncluding normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement
Columns
7.65
72457
9471.63
... More
Providing and casting in situ C. C. of trap / granite / quartzite/ gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-incharge including normal dewatering, ,plywood form work,bully/steel prop ups compaction, finishing the formed surfaces with C. M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever nesessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and
M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)
Brace beam - Lift 5-10 Mtr
20.4
225027
11030.75
... More
Item No. 20: Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor.
a) 150 mm dia
0.04
347
9925.65
... More
Providing and supplying ISI standard welded DI double flanged pipe including all taxes (central & local) railway freight, insurance, unloading from railway wagon, loading into truck transport to store / site, unloading, stacking etc. complete as directed by Engineer -in- cahrge. (for 2.75 m bare pipe)
500 mm dia D.I K 9.pipe- ( Outlet)
25
444850
17794
... More
Item No 5
Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for PCC work below foundation and footing including normal dewatering,plywood form work, compaction, finishing and curing, etc, complete.
For P.C.C. (M-15) grade
71.94
473578
6582.59
... More
Item No. 5:
Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263)
12.6
1111
88.2
... More
From 3.3/0.433 KV Transformer 2 to .415 Kv LT Panel I/C 2
80
63336
791.7
... More
Item No 22
Providing and applying white-wash in two coat on old/new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing & brooming down complete. Spec.No.: Bd.P. 1 Page No. 411
839.37
10072
12
... More
f) 150 mm dia.
40
36400
910
... More
Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.
a) Sluice Valves PN 1.0 (Without by-pass arrangement)
e) 350 mm dia
1
53651
53651
... More
Item No. 9 Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263)
373.89
32976
88.2
... More
Item No 9
Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundation, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Tor Steel
150.04
14584574
97206
... More
viii)Supplying & erecting water tight terminal box of 1.6 mm (16 gauge) CRCA sheet of size 150 x 100 x 100 mm complete on pole as per specification no. CB-SB
12
4095
341.25
... More
Item No 12
Providing and fixing M.S. chequerred plate flooring of following thickness supported on M.S.angles (25 x 25 x 5 mm size) including welding, cutting and fabricating the plate to the required square or rounding shape, making holes in the plate, including providing and applying 3 coats of anticorrosive paint, etc. complete as directed by Engineer-in-charge.
b) 8 mm thick
31.2
159463
5111
... More
10) Copper Plate Earthing
Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP
2
13621
6810.3
... More
Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor.
e) 350 mm dia
1.21
28240
23339.4
... More
v)Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI80, CCT of 6500K and THD=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.
10
11697
1169.7
... More
Item No.2: Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523.
For all types of specials, bends tees etc
a) 80 mm to 300 mm dia
852
130356
153
... More
Lowering, laying and fixing in proper alignment and position all types of C.I. Air Valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves).Air Valve Double Ball Flanged Type - PN -1
c) 100 mm Dia
2
1016
508.2
... More
Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.
a) Sluice Valves PN 1.0 (Without by-pass arrangement)
b)400 mm dia
1
70635
70635
... More
c) 3.5 Core, 70 Sq.mm XLPE AL armoured cable
i) PMCC-1 to Proposed 18.5 MLD WTP Incoming Panel ( 1 run)
100
51870
518.7
... More
Item No. 13:
Providing internal cement plaster 12mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete or brick surface in all positions including racking out joints, scaffolding and curing complete.
151.45
44862
296.22
... More
Item No 32
Pipe Encasing
Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum)M-15For pipe length crossing the village
1545.13
10170930
6582.59
... More
From LT Panel to Trafo 2,3.3/0.433 (Marshalling box )
30
5190
173
... More
c) 60 HP Motor For Paranda Road ESR (1W+1S)
2
600350
300175
... More
Item No 7 (D)
Pressure gauge
Providing erecting jointoing Glyscerine filled Pressure gauge of required capacity complete with syphon tube isolated cock suitable for 100 mm dia G I pipe glyscerine filled Pressure gauge as per IS 3624:1987 shall be installed as directed with tapping on rising main.etc complete. as per detailed specification attached .
Pressure gauge 150 mm Dia.
4
8020
2005
... More
vi)Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI70, CCT upto 6500K,THD10%, p.f. 0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.
12
74907
6242.25
... More
c) 50 mm dia i) On Common Header (Existing MBR) ii) On Common Header (Mhada Colony ESR) iii) On Common Header (Proposed Paranda Road ESR)
3
30738
10246
... More
L.T. Panel to Lighting D.B. at Pump House
180
45738
254.1
... More
Item No. 15: Providing and laying in situ Cement concrete of trap/granite/ quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, 'plywood form work, bully/ steel propups, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (excluding M.S. or Tor reinforcement)
RCC M-200
9.76
75678
7751.53
... More
Item No 4
Providing and supplying double flange sluice valves confirming for IS 14846 including warn gear arrangement as per test pressure stainless steel spindle caps including inspection charges transportation upto departmental store,loading unloading,stacking excluding GST levied by GOI and GOM in all respect etc complete.
A) Sluice Valves P.N.-1.0 (Without by pass)
800 mm dia D.I K9.pipe- (Inlet, )
1
417551
417551
... More
Item No. 16:
Providing and applying washable oil bound distemper of approved colour shade and quality to old/new surface in three coats, including scaffolding, preparing surface (excluding priming coat) complete.
151.45
7629
50.38
... More
Item No 8
a) Electric Operated Circular or Rectangular Travelling Crane (Double Girder)
Providing, erecting and commissioning double girder Electrically Operated Rectangular Over head Travelling Crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendant control block.
10 Tonne Capacity - upto 12 m span
1
1402522
1402522
... More
Item No 34
Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A 9/261)
18810
1520788
80.85
... More
INR No 24
Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A 9/261)
14400
1164240
80.85
... More
19) Pressure Transmitter Designing, Supplying, Installing, commissioning & testing of pressure transmitter CE markd with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including Mounting arrangement. Output 4-20 mA / HART
Power supply - 24V DC ext.
Display - 4" LED Accuracy - +/- 0.1 % of full scale or better
Enclosure- IP 68
12
439608
36634
... More
Item No. 27 :- FLOW CONTROL VALVE
Designing, Supplying, Installing, Commissioning & testing of Flow Control Valve / Pressure reducing valve for inlet with flow measuring , flow controlling , pressure monitering & web based with cable , PLC etc. complete. Hydraulically operated self-actuated Flow & Level Control Valve (either with float or altitude pilot ) with downstream orifice having Ductile Iron valve body , Y-Pattern, Double chamber unitized actuator , Fusion bonded Epoxy coating , Copper control tubing , with Latching Solenoid & Pilot operated as per design , additional Speed control feature , drip tight sealing , Iֹn-line serviceable, Internals Stainless steel & protected diaphragm suitable for drinking water WRAS/NSF/DVGW approved.
-
-
-
... More
1000 mm dia D.I K 9.pipe- ( Outlet)
11
617760
56160
... More
Item No. 4: Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.
a) Sluice Valves PN 1.0 (Without by-pass arrangement)
a) 150 mm dia
1
10251
10251
... More
Item No. 8 :- LOWERING & LAYING KINETIC AIR VALVE
Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves).
a) 100 mm dia i) On Common Header (Subhash Nagar)
1
529
529.2
... More
Item No. 13 : Metering Cubical
a) Supplying, erecting, testing and commissioning 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, opper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 50/5A to 200/5A, VA 10 or 15, Class 0.2S, epoxy casted 3 nos. PT having ratio 11000/V3/110/V3 VA 50, Class 0.2 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation.
2
357784
178892
... More
ix)Supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. FG-FN/CF
1
2197
2196.6
... More
9) Cable Tray Cover
Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary
500
184500
369
... More
Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.
a) Sluice Valves PN 1.0 (Without by-pass arrangement)
c) 450 mm dia
1
75940
75940
... More
b) 200 mm dia
687
1536132
2236
... More
Item No10
Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-incharge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete. DI pipe 1000 MM dia
41671
39904149
957.6
... More
For Temperature Scanner panel 2 run cable
200
120200
601
... More
Item No.2:
Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523.
For all types of specials, bends tees etc.
a) 80 mm to 300 mm dia
677.71
103689
153
... More
v) From MCC to 60 HP ATS Starter -4 & Starter to Pump
30
10206
340.2
... More
Item No 12
Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.) Air valve - 200 mm dia
Foundation in B. C. Soil or Any Other Soil
1000 to 1200 mm dia
11
209418
19038
... More
b) Transformer 11 / 0.415 KV, 100 KVA
Supplying, installing, testing & commissioning of 3 phase, 11/0.433 kV, 50 Hz., 100 kVA, Mineral oil immersed and naturally cooled indoor type, aluminium wound Non-sealed transformer delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 40℃ by thermometer in oil and 45℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with standard accessories complete with test certificate with losses below 340 Watts at 50% load, 1140 Watts at 100% load as per IS:1180 (part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR-NSL.
2
524475
262237.35
... More
iv) Supplying & erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW
200
18690
93.45
... More
From HT Panel to OLTC For Annuncition Window
40
24040
601
... More
ITEM No.2 Providing and supplying ISI standard welded DI double flanged pipe including all taxes (central & local) railway freight, insurance, unloading from railway wagon, loading into truck transport to store / site, unloading, stacking etc. complete as directed by Engineer -in- cahrge. (for 2.75 m bare pipe)
450 mm dia D.I K9.pipe- (Inlet, )
30
459240
15308
... More
d) 300 mm dia.
20
28080
1404
... More
ii) L.T. Panel ( Proposed PCC ) for Proposed Pure water & WTP +Ex . WTP &
1
1431212
1431212
... More
Item No 24
Providing and fixing M.S. chequerred plate flooring of following thickness supported on M.S. angles (25 x 25 x 5 mm size) including welding, cutting and fabricating the plates to the required square or rounding shape, making holes in the plate, including providing and applying 3 coats of anticorrosive paint, etc. complete as directed by Engineer-in-charge.
over cable trench 8 mm thick
10
51110
5111
... More
Item No 12
Providing and applying 3 LPE (3 layer polyethylene) coating of min. 3000 microns composite coating and internal Fusion Bonded Epoxy Lining as per IS 3589 Annex. C of 400 micron thickness for underground laying of MS pipe, similarly due layer polyster coating of 400 micron externally and internal fusion bonded lining as per IS 3531 for above ground laying of MS pipe. Rate shall include cost of material coating and wrapping over the pipes, handling charges, preperation of pipe surface, all labour, material, including transportation of pipes from site of works to factory and back to site of works after coating excluding GST levied by GoI and GoM in all respect etc. complete. (The rate is for inside plus outside area both included)
844.97
1276713
1510.95
... More
iii) RMU To 11 KV Panel Incomer ( 1 Run)
80
203868
2548.35
... More
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or asdirected by Engineer-in-charge including normal dewatering, centering,form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and
even surface wherever necessary or roughening if special finish is to beprovided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
Landing For MS Ladder
Avg. Lift
1.8
20274
11263.6
... More
Item No 23 :- APFC Panel i) Supplying and erecting 35 kVAr, 3 phase, 50 Hz., Power contactors Derated for microprocessor APFC controller with MPP /APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps of MPP / APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection as per specification no
1
210276
210276.15
... More
Item No 8
Providing and casting in situ C. C. of trap / granite / quartzite/ gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-incharge including normal dewatering, ,plywood form work,bully/steel prop ups compaction, finishing the formed surfaces with C. M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever nesessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and
M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)
c) Beam
Base Beam - Lift 0-5 Mtr
20.4
204569
10027.93
... More
8. Stagging shall have to be designed with stresses of M-250 for ESR. However all RCC construction should be done in M-300
9. These rates are including the cost of uplift pressure if any and entire dewatering during execution. In case of water logging area where water is struck at shallow depth extra provision of dewatering shall be made as per site condition.
10. All condition given in the Member Secretary"s Circular No.MJP/TS-I/350/1668 dt. 2.8.97 and MJP/S-I/350/2127 dt. 13.7.99 shall be strictly followed and additional cost, if any due to these conditions is included in the rates mentioned below.
11.. 75% part rate shall be payable for reinforced cocnrete and plastering items of containers of E.S.R. till satisfactory hydraulic testing for water tightness is given ; and till that work shall be treated as incomplete.
-
-
-
... More
vii) 11 KV Outgoing Panel To LT Trafo Incomer 1, 11 Kv side
80
203868
2548.35
... More
8) Cable Tray
Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
500
322350
644.7
... More
Providing and casting in situ C. C. of trap / granite / quartzite/ gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-incharge including normal dewatering, ,plywood form work,bully/steel prop ups compaction, finishing the formed surfaces with C. M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever nesessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and
M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)
Roof beam - Lift 10-15 Mtr
27.2
327312
12033.55
... More
Lap Joint with Convex fillet welds.
18mm
14.08
22417
1591.8
... More
Item No 5
Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete.
133.42
110601
829
... More
Item No 24
Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.) Air valve - 200 mm dia
Foundation in B. C. Soil or Any Other Soil1000 to 1200 mm dia
83
1659161
19989.9
... More
ii) From MCC to 100 HP ATS Starter -2 & Starter to Pump
30
19751
658.35
... More
Subwork No 10
Seena River Crossing Bridge
Item No 1
Providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling the middle portion with B. C. soil (in gunny bags if required). Providing impervious /
semipervious materials on both side of B.C. soil (in gunny bags if required) including ramming, compacting to the satisfaction of Engneer-in-charge, till the completion of work including dismantling coffer dam after completion of works and disposing off the material as directed by the Engineer-in-charge.
Note: Pay line maximum - Top width payble shall be 2 mtr. and maximum payble side slopes shall be 1.5 Horizontal to 1 Vertical, if the constructed top width of the side slopes are less, then the measurements at actual are payble. Extra top width or flatter slopes are not payble. Contractor is free to use ballies, plastic sheets, piles, pipes, C.G.I. sheets for supporting hearting materials instead of impervious/ semipervious hearting materials for which no extra payments shall be payble. 30% payment shall be withheld for dismentaling of coffer dam. this foot note shall appear in tender condition. ( Type section is shown on last page of type design section of CSR)
Coffer Dam
500
358050
716.1
... More
Item No.27 :- Fire System
i) Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.
4
41588
10397.1
... More
4) For Filter bed Air inlet (For proposed 18.5 MLD & Existing 19 MLD WTP & 8.5 MLD WTP)
150 mm
24
2277816
94909
... More
2) From Existing 19 MLD WTP to Mangalwarpeth ESR, Subhash nagar ESR 1 & 2, Ghodke Plot, S.No. 1690 ESR & BIT ESR
Discharge : 115 LPS Duty Head : 32 Mtr
Operating Head Range :- 24-35 mtr
Motor rating : 75 HP (2W+1St.by)
3
3227697
1075899
... More
M. road
1
45613
45613
... More
Sluice Valve
800 mm
5
72486
14497.35
... More
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or asdirected by Engineer-in-charge including normal dewatering, centering,form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and
even surface wherever necessary or roughening if special finish is to beprovided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
lift 10 m to 15 m from RL 496.010 to RL 501.010
131.41
1614701
12287.6
... More
Excavation in general in hard material comprising of soft rock, hard rock, Manjara rock, etc, by blasting / controlled blasting, chiselling as required in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in-charge, excluding refilling. For Head Works on river or dam sub mergence for
lift 3 m to 4.5 m RL 483.0 to RL 481.5
187.5
201000
1072
... More
Item No.16 : H. T. Panel
a) H.T. Panel 11 KV Designing, providing, fabricating, erecting commissioning and testing H.T. Panel board cubical type ,Vacuum Circuit Breaker panel Indoor type including CT of required ratio,single core PT for required ratio for metering and protection including 3 O/C and E/F relay and high speed trip relay RS -485 Port. with equipment’s, multifunction meter RS 485 Port,Reverse power realy ,Electromagnetic relay ,auxiliary relay & Automatic semaphore indicator relay and base frame made of ISMC 100x75 mm as per detailed specifications 11 KV system, 630 Amp, 25 kA Vacuum Circuit Breaker panel & Load break Switch
1
1618918
1618918
... More
Item No. 15: Providing & fixing in position Steel bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete. TMT Steel - Fe-500/Fe-415
Spec. No.: Bd.F.17, Page No. 98
Tor Steel
0.79
80632
102066.3
... More
iii) 4.5 Pair X 1 Sqmm
300
111600
372
... More
Item No 12
Providing and fixing G.I. pipe railing having 1.0 M height 2017-2018 consisting 50 x 50 x 6 mm thick M. S. angles as verticals at 1.5 M c/c, and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc. complete.
340
327012
961.8
... More
IV these rates shall be increased by 5% and for Zone-II, these rates shall be decreased by 5% concerned Executive Engineer shall confirm the seismic zone for the scheme from seismic zones plan before estimation and adopt appropriate rates as per actual seismic zones( Seismic maps attached in this C.S.R.) A)Near WTP MBR - Capacity -8,10,000 lit,Stg ht.20 mtrs
1
9473642
9473642.64
... More
Murum bedding with available excavated stuff.
210.74
17701
84
... More
Item No. 20:
Providing sills of polished Kota stone 25 mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing,moulding edges, polishing and cleaning etc.
complete.
3.22
4356
1352.81
... More
ii) Supply, erection, testing & commissioning of
L.T. cable as below
a) Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe
From 3.3/0.433 KV Transformer 1 to .415 Kv LT Panel I/C 1
80
63336
791.7
... More
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or asdirected by Engineer-in-charge including normal dewatering, centering,form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and
even surface wherever necessary or roughening if special finish is to beprovided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
Roof Top slab at RL 509.00 lift 20 to 25 m for flat portion
60.34
865059
14335.5
... More
5) PLC Panel for WTP Automation
Design, manufacture, supply, installation, testing and commissioning of indoor type PLC panel of size approx. 1200 mm X 700 mm X 1500mm (LBH), fabricated out of min. 2 mm thick CRCA sheet powder coated to Siemens gray color.
The Panel shall be provided with reputed make PLC with following accessories as well as input output configuration. The PLC shall be programmed with IEC 61131 standards for control, monitoring and communication of equipments & instruments at WTP Plant (raw water monitoring, alum dosing control,clariffaculator operation & control, recirculation & mud pump operation).
PLC shall have Ethernet port & protocal for Modbus TCP communication with following IO DI –72 num DO – 40 num AI –12 num AO – 4 num 10 inch color TFT HMI complete with programming shall be provided to interact with PLC The panel shall include all the accessories (not limited to following) to achieve purpose of smooth & trouble free operation of WTP plant. MCB 16A DP – 3 num MCB 10A DP – 1 num MCB 4A DP – 4 num 24 VDC Power Supply 10A – 1 num Push Buttons – 30 num Selector Switch -16 num Control Contactor – 16 num Annunciator with 12 Windows NO to NC Type Electronic Hooter – 1 num Control Transformer – 1 num Emergency PB – 1 num Panel Cooling Fan – 1 num Panel Light with Door Switch – 1 num Control Indication Lamp – 16 num Wiring + TB etc – 1 lot Hardware – 1 lot 2 HP VFD Drive - 2 num
3
1030200
343400
... More
Item No 8
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as
directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum hickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
Beams
11.92
110946
9307.63
... More
Lowering, laying and fixing in proper alignment and position all types of C.I. Air Valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves).
Air Valve Double Ball Flanged Type - PN -1
b) 80 mm Dia
3
1442
480.9
... More
Solar at Pure Water
a) Scope of work covers Design, Supply, Installation, Testing, Commissioning and five years comprehensive warranty Maintenance and Operation of Grid Connected SPV Rooftop Plant under Net Metering without battery or with the battery backup for 1 hour of the connected load as per the technical specification given in this bid. b) Wiring upto Distribution Board from the SPV Rooftop system will be in the scope of the successful bidder(s). The maximum cable length of 25m for every solar power plant installed shall be in the scope of the bidder and supply of excess cable length if required shall be provided by consumer/beneficiary.
d) The empanelled installer will collect firm work order from the MSEDCL. A copy of Work Order, Invoice, Commissioning report Statement of Expenditure, Joint Inspection Report, Net Metering Work Completion & Synchronization reports, installed system photographs, beneficiary photo, aadhar card, mobile no & Electricity bill and bill of material has to be submitted to MSEDCL for release of CFA of MNRE.
399.86
14349232
35886
... More
From LT Panel to DG Panel Supply( Control Circuit)
30
5190
173
... More
ii) Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE
i) Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT
25
274943
10997.7
... More
ii) Wiring for plug on board with modular Switch socket, copper wiring and earthing as per specification No: WG-PW/SW
16
1949
121.8
... More
Item No 10
Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates, etc. as per detailed design and drawing or as directed by Engineer-incharge including cutting, fabricating, hoisting, erecting and fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. (Bd-C-8/278)
500
50045625
100091.25
... More
Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.
a) Sluice Valves PN 1.0 (Without by-pass arrangement)
d) 300 mm dia
2
72942
36471
... More
Item No 2
Excavation in general in hard material comprising of soft rock, hard rock, Manjara rock, etc, by blasting / controlled blasting, chiselling as required in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in-charge, excluding refilling. For Head Works on river or dam sub mergence for initial lift of 0 to 1.5 M lift 1.5 m to 3 m RL 484.5 to 483.0
262.5
274050
1044
... More
2) DG SET 50/0.415 KVA/KV
Supplying, erecting, testing and commissioning of diesel generating set with alternator of 50 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 9.98 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 150 Ltr etc. on provided M20 Grade CC Foundation as per specification no. GEN-DG
1
648421
648421.2
... More
ix) 3.3KV Panel to FCMA Starter - 3 nos (3 nos x 180Mtr =540 Mtr x 1 Run)
540
1376109
2548.35
... More
b) Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe
L.T. Panel to Lighting D.B. at Panel Room
30
7623
254.1
... More
ix) For Pro. Paranda Road ESR Rising Main 200mm
1
177824
177824
... More
Item No. 3:
Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.
c) Double flanged specials of all diameters.
e) Plain ended specials or plain ended branch flanged specials of all diameters.
189
17955
95
... More
Providing and supplying Air Valves as per IS- 14845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on ulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied
by GOI & GOM in all respect etc. complete.Air Valve Double Ball Flanged Type - PN -1
b) 80 mm Dia
3
23388
7796
... More
Item No 19
Providing and laying machine cut machine Polished Kota stone flooring 25 mm to 30 mm thick and required width in plain/diamond pattern on bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.
Flooring
30
37410
1247
... More
vii) For Ex. MBR Rising Main 300mm
1
223710
223710
... More
Item No 23
Providing and Consturcting the RCC chairs at various location like above ground line ,Nall crossing and others
28
1349236
48187
... More
iv) For 8.5 MLD Existing WTP (FM & FCV)
400 mm
2
73842
36921
... More
Providing and supplying double flange sluice valves confirming for IS 14846 including warn gear arrangement as per test pressure stainless steel spindle caps including inspection charges transportation upto departmental store,loading unloading,stacking excluding GST levied by GOI and GOM in all respect etc complete.
A) Sluice Valves P.N.-1.0 (Without by pass)
200 mm DI K9 (Over Flow Pipe)
1
18581
18581
... More
Item No 13
Providing internal cement plaster 12mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete or brick surface in all positions including racking out joints, scaffolding and curing complete.
101.32
28617
282.45
... More
Item No 22
Providing and supplying at site ductile iron /Spheroidal Graphite (S.G.) iron single /Double chamber tamper proof air valve without isolating sluice valve. Valves in accordance with BSEN 1074-4 of PN 10/16 rated, with body and bonnet of ductile iron confirming to EN 1563/IS 1865 Gr. 500/7 or Gr.400/15 floats, float guide, seat ring of stainless steel 1.4436/1.4306, seat ring gasket of WRAS approved EPDM rubber (suitable for drinking water), internal fasteners of stainless steel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Flange connections as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14845. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16)
Kinetic Air Valve Flanged
Type PN-1.6 ne @ every Km of pipeline Plus additional 4 Nos for 2 Railway crossings
200 mm
83
3757410
45270
... More
Item No 8
Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck,
Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and
IS 12820/1989 or latest edi-tion/revision with amendments for Rubber Gaskets Dia of pipe K-7 : 1000.00 mm
41671
1052651131
25261
... More
Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523.
For all types of specials, bends tees etc.
b) 350 mm and above dia
580.93
108052
186
... More
10) PLC with HMI for sand filter ( with 4 Filter beds )
Design, manufacture, supply, installation, testing and commissioning of indoor type PLC panel of size approx. 1200 mm X 700 mm X 1500mm (LBH), fabricated out of min. 2 mm thick CRCA sheet powder coated to Siemens gray color.
The Panel shall be provided with reputed make PLC with following accessories as well as input output configuration. The PLC shall be programmed with IEC 61131 standards for control, monitoring and communication of equipments & instruments at WTP Plant (sand filter bed wasing & operation).
PLC shall have Ethernet port & protocal for Modbus TCP communication with following IO DI –72 num DO – 40 num AI –24 num AO – 16 num 10 inch color TFT HMI complete with programming shall be provided to interact with PLC The panel shall include all the accessories (not limited to following) to achieve purpose of smooth & trouble free operation of sand filters (sand filter bed wasing & operation). MCB 10A DP – 1 num MCB 4A DP – 4 num 24 VDC Power Supply 10A – 1 num Push Buttons – 30 num Selector Switch -15 num Control Contactor – 15 num Annunciator with 12 Windows NO to NC Type Electronic Hooter – 1 num Control Transformer – 1 num Emergency PB – 1 num Panel Cooling Fan – 1 num Panel Light with Door Switch – 1 num Control Indication Lamp – 15 num Wiring + TB etc – 1 lot Hardware – 1 lot
2
675000
337500
... More
300 mm
12
25295
2107.98
... More
Sluice valve
800mm
1
13807
13807
... More
Item No. 18: Lowering, laying and jointing in position following C.I.D.F Reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. (Rate for all class of valves.) Note: Only 75% rate is payable till satisfactory hydraulic testing is given.
i) Sluice Valves
a) 150 mm dia
1
3748
3748.5
... More
iv) Supplying and erecting integrated LED Highbay Fitting 70W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics, having system lumens output of Min.10000 Lumens, min. efficacy of 145 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.90, operating range of 140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification No FG-ODF/FLS2.
8
91560
11445
... More
Item No 4
Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
Raft (RL 474.00 m to 474.50m)
215.43
2135475
9912.8
... More
26) Sluice Valve
Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete
1) For Filter Bed water inlet (Fo Existing 19 MLD WTP & 8.5 MLD WTP)
500 mm
6
692700
115450
... More
Excavation in general in hard material comprising of soft rock, hard rock, Manjara rock, etc, by blasting / controlled blasting, chiselling as required in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in-charge, excluding refilling. For Head Works on river or dam sub mergence for
lift 4.5 m to 6 m RL 481.5 to 480.0
112.5
123750
1100
... More
Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.
a) Sluice Valves PN 1.0 (Without by-pass arrangement)
c) 250 mm dia
2
57454
28727
... More
Providing and supplying at site of ductile iron /spheroidal graphite (S.G.) iron D/F double eccentric resilient seated short body butterfly valves with gear box & handwheel, without bypass arrangement. Valves in accordance with BS EN 593 of PN 10/16 rated, with body & disc of ductile iron confirming to EN 1563/IS 1865 Gr.500/7 or Gr.400/15, Body seat of intergral SG Iron/S.S. AISI 316, seal retaining ring of steel C45/S.S. 1.4436, Shaft of S.S. 1.4021, Periferial disc seal and “O” rings of WRAS approved EPDM rubber (suitable for drinking water), Internal fasteners of stainless steel A2. Body & disc coated inside & outside with electrostatically applied epoxy powder coated blue colour. (suitable for drinking water.) as per DIN 30677- 2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be 100% tight shutoff. Face to face is per IS 13095 short body. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 13095. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete.
ii) 500 mm dia , PN - 1.6 for Pump discharge Pipe
3
1108865
369621.7
... More
Item No 4
Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering,plywood form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M.S. or Tor reinforcement. In M-300
For lift 0 to 5 m
90
743456
8260.63
... More
6) For Calriffaculator drain (For Existing 19 MLD WTP)
250 mm
1
28727
28727
... More
3) From Existing 8.5 MLD WTP to Paranda Road ESR 1 & 2
Discharge : 100 LPS Head : 27 Mtr
Operating Head Range :- 20-30 mtr
Motor rating : 60 HP
2
2446578
1223289
... More
Item No 18
Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and
watering the surface for two days etc complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessaryAs per outside plaster
292.86
86393
295
... More
Item No 25
Providing, Erecting and Commissioning MS Fabricated Vacuum Breaker Cum Air Release Valve. Valve should be with separate two number inlet port for VACUUM BREAKING and one number outlet port for AIR RELEASE, with tamperproof construction. Total area of two Inlet Port equal to 100 % area of nominal size of valve. One number OUTLET PORT AREA should be 75% of the nominal size of valve (Orifice size equal to nominal size of the valve). Each vacuum breaking port should have independent isolation mechanism. All sliding parts and sealing discs should be made up of SS. Outlet port should be closed by float made up of stainless steel ball. All valve parts should be provided with suitable corrosion protection quote like hot dip galvanizing and epoxy quoting during manufacturing. For isolation Wafer type DI Butterfly Valve with MS double flanged strainer assembly with S.S. Strainer to be provided. Wafer type Butterfly valve should be as per IS 13095 with Body & disc as per SG 400/12, Seat ‐ Nitrile / EPDM. Operation by Handlever upto 150 mm & with Gear box for higher sizes." PN 1.6 - 250 mm dia
4
2855220
713805
... More
Subwork 16 - MBR 4,60,000 Liter
Item No 1
Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 meters centre to centre for E.S.R. having capacity 500 m3 & not more than 6 m c/c for E.S.R.having capacity above 500 m3 including excavation in all types of strata, foundation concret, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 meters, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design.
-
-
-
... More
Item No. 7 :- KINETIC AIR VALVE
Providing and supplying Kinetic Double Orifice type Air Valves confirming to IS 14845 as per MJP’s standard specifications combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete.
a) 100 mm dia i) On Common Header (Subhash Nagar)
1
13102
13102
... More
Item No 9
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum hickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)Beams
50.94
474130
9307.63
... More
Item No. 20 :- Ring Main Unit Supplying , erecting, testing & commissioning 11kV, 630A, 21kA/3sec, 3 way outdoor, extensible motorised SCADA compatible RMU as per electric supply company specification consisting of 1 no. feeder with load break switch and 2 nos. feeder with VCB as per specification no. SW-HTS / RMU SCADA (1LBS +2VCB )
1
628215
628215
... More
Item no 21
Providing sills & jambs of polished Kota stone 25mm to 30mm thick, on a bed of C.M. 1:4 including neat cement float, filling joints with cement slurry, curing, polishing, rounding edges, cleaning complete.
18.29
23575
1289
... More
Item No 17
Transporting within 500 meters,laying in position to correct line and level M. S. pipes with / without any outcoating, on prepared bedding in trenches including marginal cutting wherever required, assembling tack welding the same. The rate to include loading, unloading, hoisting, etc. complete as specified.
Casing pipe 1300 mm dia, 18mm
207
380145
1836.45
... More
Subwork no 12 MBR Estimate
Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 meters centre to centre for E.S.R. having capacity 500 m3 & not more than 6 m c/c for E.S.R.having capacity above 500 m3 including excavation in all types of strata, foundation concret, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 meters, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design. providing and fixing accessories such as Stainless steel ladder inside and M.S. ladder with G.I. railing outside, C. I. manhole frame and covers water level indicatiors, lightening conductor, G. I. pipe railing around walk way and top slab, providing spiral staire case from ground level to roof level, M.S.Grill gate of 2 Mtrs height with locking arrangement, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of acrylic emulsion with silicon additives paint to the structure including roof slab and epoxy paint to internal surface & anti-termite treatment for underground parts of the structures and giving satisfactory water tightness test as per I.S. code, The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-charge.
-
-
-
... More
300 mm dia D.I K 9.pipe- ( Outlet)
15
121875
8125
... More
During Second year (3% of total cost)
1
57814
57814
... More
A)Near WTP MBR - Capacity -4,60,000 lit,Stg ht.10 mtrs
1
5212374
5212374.05
... More
Dia of pipe : 800.00 mm DI K9
1115
720290
646
... More
viii) Mhada ESR Rising Main 250 mm
1
195862
195862
... More
75 HP For Existing 19 MLD WTP
3
413979
137993
... More
Item No 3
Excavation in general in hard material comprising of soft rock, hard rock, Manjara rock, etc, by blasting / controlled blasting, chiselling as required in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in-charge, excluding refilling.
Lift 1.50 to 3.0 m
743.58
815112
1096.2
... More
From HT Panel to OLTC Tap Rise & Lower
40
24040
601
... More
Item No 21 a
Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
2204.4
185169
84
... More
4) Residual chlorine analyser Design, Supply, Installation,Testing of Residual chlorine analyser / meter must have automatic sensor cleaning facility at pure water sump and Interfacing with PLC panel. Residual Chlorine meter shall comprises of 3 components i.e. sensors,flow through assembly and transmitter with indicator and gives 2 outputs one to Local display & other to PLC including Mounting arrangement. Overall Range : 0 - 8 mg/l (ppm)
Accuracy : 2% of full scale
Supply Voltage : 230 V ac Output : 4-20 mA
Membrane free sensor of 2 gold plated electrodes
for long term stability and reference electrode
(ag/Agcl) must be provided to avoid maintenance.
IP 65 Nema 4 housing protection class required.
3
819972
273324
... More
b) 200 mm dia, PN-1 Pump serving to Existing MBR
2
37162
18581
... More
iii) RMU to Transfromer 1 & 2
100
161280
1612.8
... More
O & M COST FOR VALVES AND PLC GPRS MODEM CONTROLLER
Operation and Maintenance Charges of the whole
water supply scheme on SCADA and generation of
daily report of water quality parameters and
electrical parameters with specific consumption in
kWh/ml . The report shall be mailed daily to the
head quarters for monitoring purpose.
During First year - Free
-
-
-
... More
5) For Filter bed Drain (For proposed 18.5 MLD & Existing 19 MLD WTP & 8.5 MLD WTP)
500 mm
12
1571844
130987
... More
Item No 5
Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264)
4320
5599584
1296.2
... More
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or asdirected by Engineer-in-charge including normal dewatering, centering,form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and
even surface wherever necessary or roughening if special finish is to beprovided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
lift 15 m to 20 m from RL 501.010 to RL 501.50
12.88
171427
13311.55
... More
Item No 25
Providing M.S. bar mesh prepared out of 16 mm dia M.S. bar at 15 cm. c/c both ways, welded to flanged ring including tack welding of bars and fixing the same with nuts and bolts on open faces of outlet/inlet pipes in the sump or reservoir, etc. complete as directed by Engineer-in-charge.
M.S. Bar mesh around Air valve
199.2
401796
2017.05
... More
Subwork No 2 - Coffer Dam
Item No 1
Providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling the middle portion with B.C. soil (in gunny bags if required). Providing impervious / semipervious materials on both sides of B.C. soil (in gunny bags if required) including ramming, compacting to the satisfaction of Engineer-in-charge till the completion of work including dismantling coffer dam after completion of works and disposing off the material as directed by the Engineer-in-charge.
Note : Pay line maximum. Top width payable shall be 2 Mtr. and maximum payable side slopes shall be 1.5 horizontal to 1 vertical, if the constructed top width of the side slopes are less, then the measurements at actual are payable. Extra top width or flat slopes are not payable. Contractor is free to use ballies, plastic sheets, piles, pipes, CGI sheets for supporting hearting materials instead of impervious/ semi-pervious hearting materials for which no extra payments shall be payable. 30% payment shall be withheld for dismantling of coffer dam. This foot note shall appear in tender condition. (Type section is shown on last page of type design section of CSR).
Coffer Dam is considered for Approach channel , Jack well & Approach bridge
12336.25
8413322
682
... More
Item No.10 :- MOTOR
Providing, erecting and giving test and trial of Vertical flange Mounted TEFC motor 1500 RPM,squirrel cage induction motor, conforming to IS12615:2011 having continuous rating suitable foroperation at 3300 Volts +/10%, 3 Phase, 50 Hz+/-3% with "F" class insulati on temperature riselimited to class "B" insulation. Motor shall be fittedwith suitable space heater and six nos. RTD. 683 HP VSS Motor, 1500 RPM
3
3970395
1323465
... More
Item No 14
Providing and supplying at site ductile iron /Spheroidal Graphite (S.G.) iron single /Double chamber tamper proof air valve without isolating sluice valve. Valves in accordance with BSEN 1074-4 of PN 10/16 rated, with body and bonnet of ductile iron confirming to EN 1563/IS 1865 Gr. 500/7 or Gr.400/15 floats, float guide, seat ring of stainless steel 1.4436/1.4306, seat ring gasket of WRAS approved EPDM rubber (suitable for drinking water), internal fasteners of stainless steel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Flange connections as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14845. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16)
Kinetic Air Valve Flanged
Type PN-1.6
150mm
46
2001966
43521
... More
ii) Supplying and erecting G.I. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP).
360
83916
233.1
... More
Subwork 14 - PURE WATER GRAVITY MAINS FROM WTP TO VARIOUS ESR
Item No. 1: Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edi-tion/revision with amendments for Rubber Gaskets. (IS:8329-2000 Latest Version) DI K7
a) 150 mm dia
35
59010
1686
... More
Item No 6
Providing and casting in situ C. C. of trap / granite / quartzite/ gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, ,plywood form work,bully/steel prop ups compaction, finishing the formed surfaces with C. M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever nesessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) For RCC M-300 grade Beams/Braces/Lintels
Below GL
lift 0 to 5 m for Beams
79.5
759513
9553.63
... More
Item No. 14 :-Vertical Hollow Shaft Motor
Providing, erecting and testing vertical hollow shaft motor 1500 RPM, squirrel cage induction motor,conforming to IS 12615, class IE3 premium, having continuous rating suitable for operation at 415 Volts +/-10%, 3 Phase, 50 Hz +/- 5% with "F" class insulation temperature rise limited to class liB" insulation a) 100 HP Motor For Proposed MBR (1W+1S)
2
1029318
514659
... More
RCC Valve chamber 2.5*2.5*2.0 m
1
182667
182667
... More
d ) Supplying, erecting & terminating XLPE armoured cable 3 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Form Actuator Panel to Actuator
600
76860
128.1
... More
Item No 25
Providing and fixing M.S. chequerred plate flooring of following thickness supported on M.S. angles (25 x 25 x 5 mm size) including welding, cutting and fabricating the plates to the required square or rounding shape, making holes in the plate, including providing and applying 3 coats of anticorrosive paint, etc. complete as directed by Engineer-in-charge.
over cable trench 8 mm thick
25
127775
5111
... More
200 mm DI K9 (Over Flow Pipe)
20
95140
4757
... More
14) Cable Tray
Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
800
491200
614
... More
Providing and supplying double flange sluice valves confirming for IS 14846 including warn gear arrangement as per test pressure stainless steel spindle caps including inspection charges transportation upto departmental store,loading unloading,stacking excluding GST levied by GOI and GOM in all respect etc complete.
A) Sluice Valves P.N.-1.0 (Without by pass)
500 mm dia D.I K 9.pipe- ( Outlet)
1
109450
109450
... More
Item No 23
Refilling the trenches with available
excavated stuff with soft material first over
pipeline and then hard material in 15 cm
layers with all leads and lifts including
consolidation, surcharging, etc. complete.
52.08
4374
84
... More
10. All condition given in the Member Secretary"s Circular No.MJP/TS-I/350/1668 dt. 2.8.97 and MJP/S-I/350/2127 dt. 13.7.99 shall be strictly followed and additional cost, if any due to these conditions is included in the rates mentioned below.
11.. 75% part rate shall be payable for reinforced cocnrete and plastering items of containers of E.S.R. till satisfactory hydraulic testing for water tightness is given ; and till that work shall be treated as incomplete.
-
-
-
... More
c) 250 mm dia
1186
3446516
2906
... More
iii) Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP.
13
88534
6810.3
... More
g) Supplying and erecting armoured control cable with ISI mark stranded / solid copper conductor 1.1 kV grade complete erected on wall / panel or in provided trench in an approved manner.3 Core,2.5 Sq mm CU XLPE armoured cable
From LT Panel to HT Panel i/c 1 (Control 3.3KV )
30
5190
173
... More
Item No 35
Providing, erecting and commissioning M.S. Dismantling joint as per requirement and Department's approved drawing and specifications, including machining and rubber rings and suitable for 16 kg/cm2 working pressure with required flanges of suitable size with nut bolts etc complete. The joint should have through long bolts so that during normal working pressure there should be no sliding movement of sliding flanges. L.O.F. ( length over flange ) should not be less than 75% of dia
.1000 mm
11
1770560
160960
... More
Item No. 19: Lowering, laying and jointing in position following C.I.D.F Reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. (Rate for all class of valves.) Note: Only 75% rate is payable till satisfactory hydraulic testing is given.
i) Sluice Valves
a) 200 mm dia
1
3899
3899.7
... More
d) 200 mm dia, PN-1 Pump serving to Existing MBR For Existing MBR Common Header For Proposed Paranda ESR 1 & 2 Common Header
6
23398
3899.7
... More
Item No.12 : Ring Main Unit
Supplying, installing, testing and commissioning 11 kV 630A, indoor type ring main unit with 1 VCB & 2 LBS with internal arc compliance complete erected on provided CC foundation/MS channels/trench, etc., as per specification no SW-HTS / RMU
1
367396
367396
... More
Item No 19
Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear)
Rolling Shutter
16
84928
5308
... More
Subwork No 1 Approach Channel Length - 50 Meter
Item No 1 Excavation in general in soft material comprising of soft soil, soft murum, sand, hard murum with boulders in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, Supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricating, gurading, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in- charge, etc. complete excluding refilling. For Head Works on river or dam submergence for initial lift of 0 to 1.5 M RL 486.00 to RL 484.5
337.5
156600
464
... More
6) Communication Cable Supplying and fixing cat-6A LSZH cable suitable for LAN / WAN as per specification complete.
200
16170
80.85
... More
27) M.S. Pipe & specials
Manufacturing, providing and supplying double flanged M. S. pipes (Commercial Quality) including procurements of plates,
gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). 8mm thickness
2000
190000
95
... More
Item No 23
Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak proofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.
317.98
373871
1175.77
... More
Item No. 23: Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264)
139.93
181377
1296.2
... More
Item No. 6: Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
9
75518
8390.98
... More
Item No 10
Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.
Scour Valve PN1.6
500 mm
6
821652
136942
... More
Thrust Block /Anchor Blocks
45.23
334029
7385.63
... More
Item No 19
Providing, double flanged short body pattern type manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS-210 Gr.CF 200 generally confirming to IS-13095-1991, Synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearing including inspection charges, transportation up to departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. excluding C.C. foundation /structural steel support.
Butterfly Valves - PN 1.6
1000 mm dia pipeline 2 + 2 Valves on either side of Railway crossing + 1 at Every road crossing
11
3744059
340369
... More
Excavation in general in soft material comprising of soft soil, soft murum, sand, hard murum with boulders in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, Supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricating, gurading, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in- charge, etc. complete excluding refilling. lift 4.5 m to 6 m from RL 481.50 to RL 480.00
796.4
434036
545
... More
24) Air Conditioners Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC
i) For 18.5 MLD Proposed WTP SCADA PC - 1 No
ii) For 19 MLD Existing WTP Workstation PC - 1 No
iii) For 8.5 MLD Existing WTP Workstation PC - 1 No
3
138140
46046.7
... More
Item No 2
Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264)
59.62
73771
1237.45
... More
Air valve - 200 mm dia
Foundation in B. C. Soil or Any Other Soil
450 to 900mm dia
2
30362
15181
... More
1) Oil conservator with filling hole with cap and plain oil level gauge.
2) Silica gel dehydrating breather charged with Silica Gel.
3) Oil drain valve.
4) Oil filter valve.
5) Lifting eyes / hooks.
6) Two earthing terminals.
7) Diagram and rating plate.
8) Air Vent.
9) Explosion Vent.
10) 100 mm dia thermometer with thermometer pocket
11) Four bi directional plain roller.
12) Bucholtz relay.
13) Resistance Temp. detector.
14) Marshalling box.
15) Automatic Voltage Regulator (AVR). 16) Remote Tap Changing Controller (RTCC).With On Load Tap Changer -15% to +5% in steps of 1.25% with RTCC, AVR and marshalling box, and other specification as per TR-4
-
-
-
... More
Providing and casting in situ C. C. of trap / granite / quartzite/ gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, ,plywood form work,bully/steel prop ups compaction, finishing the formed surfaces with C. M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever nesessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) For RCC M-300 grade Beams/Braces/Lintels
lift 5 to 10 m for Beams
75
788175
10509
... More
b) Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(UE), 3 x 95 sq. mm. aluminium conductor laid in provided trench / pipe
Transformer 1 Outgoing Feeder 11 KV to 3.3 Kv HT Panel I/C 1 (2 Run)
80
143136
1789.2
... More
FCV 400 mm
1
841282
841282
... More
Item No.9 :- Electromagnetic Flow meter
Supply, install and commissionElectromagnetic Flow Meter (EMF) As Per ISO4064, for Raw/Pure water with accuracy+/-0.5% of measured value & protection as pergiven specifications for size 100 mm-1000mmincluding sensor, transmitter surge arrestor, cableGI duct if suitable size for 25 mtrs built in GSM (with Simcard and its charges,valid for 36 months)including the pipe cutting, leveling and installationof flow meter in the pipelines with necessary tooltackles, cranes including 36 months guarantee etc complete, as may be required at site & basedon technical specifications.
750 mm dia. For Common Header
1
571271
571271
... More
During Sixth year (7% of total cost)
1
2077846
2077846.82
... More
ItemNo 7 (B)
Making Flanged Joint
Providing and making flanged joints to flanged C.I./M.S. pipes of all classes/specials etc. including cost of all jointing materials (rubber packing, nut bolts, etc.), labour, hydraulic testing etc. complete.
a) 500 mm dia
10
28820
2882
... More
Dia of pipe : 800.00 mm DI K9
22885
429711645
18777
... More
Item No 14
Providing and erecting Cast Iron Sluice Gate manufactured and tested as per IS:3042-1965,designed to sustain 2 kg/cm2 pressure, Gates to be provided with brass seats, and spindle of MS bright bar of required height to enable to operate the gate from operating slab of intake structure including GM nut bolts SS-304 hardware, necessary wedges to be provided to achieve leak tightness, including operation wheel, head stock, foundation material, labour etc. complete including taxes and duties but excluding GST.
1
259888
259888
... More
Item No 18
Providing and laying in situ cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering,plywood form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) M-200
Thrust Block /Anchor Blocks
287.1
2225440
7751.53
... More
Item No 16 :-
L.T. PANEL
a) Designing, providing, fabricating, erecting commissioning and testing L.T. cubical Panel board with equipment’s as per detailed specifications
i) L.T. Panel (PMCC-1 ) for Proposed Pure Water Sump
1
386132
386132
... More
viii) 11 KV Outgoing Panel To LT Trafo Incomer 2, 11 KV side
80
203868
2548.35
... More
O & M COST FOR VALVES AND PLC GPRS MODEM CONTROLLER
Operation and Maintenance Charges of the whole
water supply scheme on SCADA and generation of
daily report of water quality parameters and
electrical parameters with specific consumption in
kWh/ml . The report shall be mailed daily to the
head quarters for monitoring purpose.
During First year - Free
-
-
-
... More
Item No 24
Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary cleaning and preparing the surfaces, watering for two days complete. Spec.No.: Bd.O. 8 Page No. 406
1677.04
132486
79
... More
Item No 8
Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete.Dia of pipe : 800.00 mm DI K9
22885
15522895
678.3
... More
Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor.
c) 250 mm dia
1.19
20521
17302.95
... More
iv) Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no. EA-EP
195
180794
927.15
... More
iii) Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW
4
487
121.8
... More
Supply, erection, testing & commissioning of ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984)
With by pass arrangement
ii) 500 mm dia, PN - 1.6 for Pump discharge Pipe
3
688694
229564.7
... More
Item No 7
Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing
materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edi-tion/revision with amendments for Rubber Gaskets
Dia of pipe K-7 : 1000.00 mm
5559
140425899
25261
... More
Item No 4
Dewatering charges for estimation purpose
for head works in river basin or dam :
Approach Bridge
170
148869
875.7
... More
b) D.S.L. (Down Shop Lead)
Add for D.S.L. (Down Shop Lead) system for above crane Add per m length of longitudinal travel.
60
150120
2502
... More
Motor RTD Cable
200
34600
173
... More
Item No 31
Railway Crossing and Road Crossing
Pushing of M.S. pipes of following dia for road crossing and railway crossing by push through method in all types of strata
by using hydraulic jack and drilling machine of required diameter of below M.S. casing pipes, lowering, laying , jointing of material, required welding machinery, tripod, shain -pulley block
crain, blower, compressor, loading and unloading of machinery into the trench, etc. transportation and dewatering, etc complete, as directed by engineer-in charge but excluding the cost of M.S. pipes In Rock - 1300 mm dia casing pipe
207
8185618
39544.05
... More
Item No 6 ;
Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications double orifice type combined with isolating sluice valve, mounted in horizontal position and operated by wheel gearing, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental store, excluding GST levied by GOI & GOM in all respect etc. complete
Air Valve Double Ball Flanged Type - PN -1
c) 100 mm Dia
2
19718
9859
... More
Item No. 5: Providing and supplying Air Valves as per IS- 14845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on ulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied
by GOI & GOM in all respect etc. complete.Air Valve Double Ball Flanged Type - PN -1
a) 65 mm dia
3
20478
6826
... More
Item No26
Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.
410.34
514372
1253.53
... More
Kinetic Air Valve Flanged
Type PN-1.6150mm
2
87042
43521
... More
3) For Filter bed wash water inlet (For proposed 18.5 MLD & Existing 19 MLD WTP & 8.5 MLD WTP).
300 mm
24
2657880
110745
... More
25) Valve Actuator Providing, erecting Electric Valve Actuator for non rising spindle type sluice valve of PN 1 & PN 1.6 rating, totally enclosed, weather-proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp, AC/DC, torque switch dial and with TEFC squirrel cage induction.
1) For Filter Bed water inlet (For proposed 18.5 MLD & Existing 19 MLD WTP & 8.5 MLD WTP)
500 mm
12
1571844
130987
... More
Item No 27
Providing and consrtucting the RCC chairs at Nall /River Crossing or laying Pipe line above ground or as per instruction of Engineer in Charge
40
1927480
48187
... More
Automation Work of WTP
Part B : Water Treatment Plant
1) Open channel type ultrasonic flowmeter with FIT
Design, Supply, Installation, Testing & calibration of open chanel type ultrasonic flow Transmitter CE marked with following technical parameters at Raw Water channel and Interfacing with PLC panel including mounting arrangement. Range- 0 - 5 mtrs Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4" LED
Accuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68
3
163992
54664
... More
Item No 20
Providing and laying machine cut machine Polished Kota stone flooring 25 mm to 30 mm thick and required width in plain/diamond pattern on bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.
Flooring
263
327961
1247
... More
iv) 8 Pair X 1 Sqmm
200
133000
665
... More
viii) Mhada ESR Rising Main (FM)
200 mm
1
16949
16949
... More
Item No 2
Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (BdA-3/259)
PCC M150
72
14832
206
... More
Item No. 11:
Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies,staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire). (Bd-F 17/306) Tor steel
2.41
245979
102066.3
... More
d) 3 Core, 95 Sq.mm XLPE AL armoured cable
i) From MCC to 100 HP ATS Starter -1 & ATS to Pump
30
19751
658.35
... More
During Fourth year (7% of total cost)
1
134899
134899
... More
From LT Panel to DG Battery Charger Supply
40
6920
173
... More
ii) Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification
540
125874
233.1
... More
31) Flow Control Valve Designing, Supplying, Installing, Commissioning & testing of Flow Control Valve / Pressure reducing valve for inlet with flow measuring , flow controlling , pressure monitering & web based with cable , PLC etc. complete. Hydraulically operated self -actuated Flow & Level Control Valve (either with float or altitude pilot ) with downstream orifice having Ductile Iron valve body , Y-Pattern, Double chamber unitized actuator , Fusion bonded Epoxy coating , Copper control tubing , with Latching Solenoid & Pilot operated as per design , additional Speed control feature , drip tight sealing , Iֹn-line serviceable, Internals Stainless steel & protected diaphragm suitable for drinking water WRAS/NSF/DVGW approved.
FCV 600 mm
2
3375702
1687851
... More
Item No 26
Providing and laying in situ cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering,plywood form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) M-200
Thrust Block /Anchor Blocks
317.14
2458319
7751.53
... More
Item No. 17: Valve chamber with Precast SFRC frame and covers.
Providing and Constructing B.B. Masonry valve chamber with 15 m thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 proportion 12 mm thick cement plaster in C.M. 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-Charge. (Note : Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2M).
As above of 1.2 x 1.2 m internal size and depth upto 1.5 M with SFRC frame and cover of size 540 mm dia fixed in RCC slab
7
178399
25485.6
... More
From HT Panel to OLTC LED indicators
40
24040
601
... More
Item No. 7:
Providing and casting in situ Cement Concrete of trap/ granite / quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineerin charge ncluding normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor
reinforcement
4.97
49410
9941.83
... More
Item No. 16: Providing & fixing in position Steel bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. completeTOR STEEL
Spec. No.: Bd.F.17, Page No. 98
Tor Steel
0.59
60219
102066.3
... More
ITEM No.4
Providing and supplying double flange sluice valves confirming for IS 14846 including warn gear arrangement as per test pressure stainless steel spindle caps including inspection charges transportation upto departmental store,loading unloading,stacking excluding GST levied by GOI and GOM in all respect etc complete.
A) Sluice Valves P.N.-1.0 (Without by pass)
450 mm dia D.I K9.pipe- (Inlet, )
1
75940
75940
... More
vii) For Ex. MBR Rising Main (FM)
350 mm
1
27718
27718
... More
Item No. 19 :- POWER TRANSFORMER
a)Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 630 kVA, Mineral oil immersed and naturally cooled outdoor type, Copper wound Non-sealed transformer delta/star connected additional neutral brought out onload side, temperature rise should not exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, having 7 number of tap positions , with standard accessories complete with test certificate with losses below 1860 Watts at 50% load, 5300 Watts at 100% load as per IS:1180 (part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR NSL 11/0.433 kV, 50 Hz., 630kVA,.
2
28381644
14190821.78
... More
Item No. 17: Lowering laying and jointing with SBR rubber gaskets C.I. S.S./D.I. Pipes of various classes with CI/MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-Charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour, giving hydraulic testing etc. complete.
Note : only SBR Rubber gaskets to be used
MS for DI K9 pipe
a) 200 mm dia
1000
118650
118.65
... More
Item No 11
Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
2404.96
202017
84
... More
vi) For Paranda Road Rising Main (FM)
400 mm
1
36921
36921
... More
Item No 19
Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundation, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Tor Steel
20.1
2051226
102066.3
... More
iii) Load Break Switch for HT Capacitor
Supplying, installation, testing and commissioning xtendable/non-extendable indoor type 11 kV, 630A, load break switch, compliant to IEC 62271 -100, 200 and 102, on provided MS channels/trench/foundations per specification no SW HTS / LBS
2
275730
137865
... More
Item No7
Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete, pavement including all materials and labour complete.
288
8640
30
... More
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or asdirected by Engineer-in-charge including normal dewatering, centering,form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and
even surface wherever necessary or roughening if special finish is to beprovided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
Pump Floor slab + walkway gallery RL 499.0 m
10-15 m lift
115.53
1419632
12287.6
... More
Item No 6
Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete, pavement including all materials and labour complete.
40
1200
30
... More
Item No 3
Providing and supplying at site of ductile iron /spheroidal graphite (S.G.) iron D/F double eccentric resilient seated short body butterfly valves with gear box & handwheel, without bypass arrangement. Valves in accordance with BS EN 593 of PN 10/16 rated, with body & disc of ductile iron confirming to EN 1563/IS 1865 Gr.500/7 or Gr.400/15, Body seat of intergral SG Iron/S.S. AISI 316, seal retaining ring of steel C45/S.S. 1.4436, Shaft of S.S. 1.4021, Periferial disc seal and “O” rings of WRAS approved EPDM rubber (suitable for drinking water), Internal fasteners of stainless steel A2. Body & disc coated inside & outside with electrostatically applied epoxy powder coated blue colour. (suitable for drinking water.) as per DIN 30677- 2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be 100% tight shutoff. Face to face is per IS 13095 short body. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 13095. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete.
i) 750 mm dia , PN - 1.6 for Common header Pipe
1
929441
929441.35
... More
Subwork 13 PW Rising Main From WTP To Various ESR
Item No. 1: Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edi-tion/revision with amendments for Rubber Gaskets. (IS:8329-2000 Latest Version)
a) 200 mm dia
1000
2607000
2607
... More
iii) L.T. Panel ( Proposed PMCC -2 ) for Existing 8.5 MLD WTP
1
252187
252187
... More
LT Cable :-Supplying and erecting, XLPE insulated,armoured cable 1100 V grade with ISI mark Three and half core, stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I.Earth wire 6 sq mm , complete erected on wall /on pole with 25 X 3 mm M.S. clamps or in provided trench in an approved manner.XLPE cable as below
a) Single core, 300 Sq mm XLPE AL armoured cable
700
437902
617
... More
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, plywood form work,bully/steel prop ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted ) For RCC M-300 grade - all types of columns. Below GL
lift 10 to 15 m for columns
12
139948
11662.4
... More
During Third year (5% of total cost)
1
1484176
1484176.3
... More
Providing & Fixing Step -up Transformer of 0.440 KV to 11 KV of 1250 kVA Capacity Providing, erecting and commissioning out door type copper wound transformer a5 per IS 1180 (Part I) : 2014 Level II continuously rated for 3 Ph, 50 Hz, at full load and temp. rise not exceeding 45° C by thermometer in oil and 5()OC by the resistance in winding after continuous run resistance in winding after continuous mn at full load rating, the transformer should have oil immersed winding having vector group DY 11, HT side connected in Delta and LT side connected in Star with neutral brought out connected to provided separate earthing. The transformer shall have power terminal arrangement, bushings / cable end box on HT side and cable end box on L T side. 2 Nos. channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. The transformer should have following standard fittings. Transformer shall be of lato::st manufacturing standards as per amended IS specifications and the Load & No Load losses
shall be as per IS.
1
2411775
2411775
... More
ii) For 19 MLD Existing WTP (FM & FCV)
600 mm
2
132772
66386
... More
Temprature Scanner Cable for Pump for 3 pumps
200
34600
173
... More
ii) for Filter Bed Panel @ 8.5 MLD WTP
1
82569
82569
... More
viii) Supplying & erecting water tight terminal box of 1.6 mm (16 gauge) CRCA sheet of size 150 x 100 x 100 mm complete on pole as per specification no. CB-SB
4
1365
341.25
... More
From LT Panel to DG Battery Charger Supply
40
6920
173
... More
Item No 5
Supply, erection, testing & commissioning of ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984)
With by pass arrangement
i) 750 mm dia, PN - 1.6 for Common header Pipe
1
451038
451038.35
... More
ITEM No.2 Providing and supplying ISI standard welded DI double flanged pipe including all taxes (central & local) railway freight, insurance, unloading from railway wagon, loading into truck transport to store / site, unloading, stacking etc. complete as directed by Engineer -in- cahrge. (for 2.75 m bare pipe)
200 mm dia D.I K9.pipe- (Inlet, )
20
95140
4757
... More
c) Providing structural steel work in single stanchions composed of RSJ, channel, etc. with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineerincharge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. (Bd-C-6/277)
0.38
26606
70017
... More
Item No 7
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, plywood form work,bully/steel prop ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement
Column (M-30)
Lift 0-5 Mtr
85
867100
10201.18
... More
v) 11 KV Outgoing Panel To Trafo Incomer 2,11 KV side( 1 Run)
80
203868
2548.35
... More
Two Pole structure for HT Transformer
1
158259
158259.15
... More
xi) Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB
1
2474
2473.8
... More
Lowering laying and jointing with SBR rubber gaskets C.I. S.S./D.I. Pipes of various classes with CI/MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-Charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour, giving hydraulic testing etc. complete.
Note : only SBR Rubber gaskets to be usedAbstract for DI K7 pipe
d) 300 mm dia
40
6762
169.05
... More
iii) Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete as per specification
1
20614
20613.6
... More
Item No 22
Pipe Encasing
Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum)M-15
For pipe length crossing the village
787.58
5184345
6582.59
... More
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, plywood form work,bully/steel prop ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement
Lift 10-15 Mtr
17.58
215253
12241.45
... More
ii) Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT
16
45662
2853.9
... More
Item No. 4 :- SLUICE VALVE
Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Without bypass arrangement
a) 300 mm dia, PN-1 Pump serving to Proposed MBR Pump serving to Subhash nagar ESR Pump serving to Proposed Paranda ESR 1 & 2
7
255297
36471
... More
Item No 4
Providing, erecting electric Valve actuators totallyenclosed, weather-proof and dust proofconstruction with IP-67, protection class suitablefor installation in any position without lubrication,leakage or other operational difficulty with specialgrease filled gear box and hand wheel foremergency manual operation which willautomatically dis-engage on restoration of powerto motor and with 10 watt single phase spaceheater and contineous local mechanical positionindicator and individually replaceable counter gearassembly and with two torque and four limitswitches with S.S. flap and operated with geardriven cams and of rating 250 Volt, 5 Amp, AC/DC, torque switch dial and with TEFC squirellcage induction motor working on 440 Volts +/-10%, 3 phase, 50 Hz AC of intermittent duty ratingS-2, insulation class "F" and temp rise restrictedto class "B" with IP - 67 protection class suitablefor DOL starting and with three thermostat and 30% over load margin. The torque rating of reductiongear box shall be atleast 1.5 times max. torque required for opening and closing of valve.Electric Valve Actuator with non rising spindletype sluice valve, PN 1.6 rating
i) 750 mm dia, PN - 1.6 for Common header Pipe
1
154608
154608
... More
Item No.17 :- Battery and Battery Charger System
Providing, supplying, installation, testing & commissioning of Battery and Battery Charger System for H.T panel Control Supply voltage and as per detailed specifications.
1
409143
409143
... More
Item No. 26 :- INTERNAL & EXTERNAL ELECTRIFICATION
Pump House ,Transformer room ,Panel room , Office Room ,Toilet block etc providing, installing and Testing of Internal & External Lighting electrification etc.complete as per detailed specifications.
i) Internal Electrification
i) Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WGPW/ SW
52
19929
383.25
... More
Item No 15
Providing sand face plaster externally in two coats using approved screened sand in all positions, including providing base coat of 15mm thick in cement mortar 1:4 mixing approved water proofing compound at the rate of 1 kg./ 50 kg. of cement and curing the same for not less than two days and keeping the surface of base coat rough to receive the sand faced treatment 8mm thick in cement mortar 1:4 and finishing the surface by taking out grains and curing for 14 days including preparing the surface, watering and scaffolding etc. complete.
131.9
85575
648.79
... More
2) Pressure Transmitter
Designing, Supplying, Installing, commissioning & testing of pressure transmitter CE marked with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including Mounting arrangement. Output 4-20 mA / HART
Power supply - 24V DC ext.
Display - 4" LED Accuracy - +/- 0.1 % of full scale or better
Enclosure- IP 68
4
145456
36364
... More
Item No 3
PCC BELOW FOOTING
Providing and laying in situ following grades of Plain Cement concrete of trap/ granite/ quartzite/gneiss metal for foundation and bedding including normal dewatering, form work, compaction and curing, etc, complete. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)PCC M150
16.9
107690
6372.2
... More
For Jack well Walk Way lighting
200
38010
190.05
... More
Butterfly valve 1000 mm
11
199480
18134.55
... More
Item No 18
Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A 9/261)
2520
194040
77
... More
Subwork No 8
MBR @ CH24000
Item No 1
Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 meters centre to centre for E.S.R. having capacity 500 m3 & not more than 6 m c/c for E.S.R.having capacity above 500 m3 including excavation in all types of strata, foundation concret, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 meters, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design. providing and fixing accessories such as Stainless steel ladder inside and M.S. ladder with G.I. railing outside, C. I. manhole frame and covers water level indicatiors, lightening conductor, G. I. pipe railing around walk way and top slab, providing spiral staire case from ground level to roof level, M.S.Grill gate of 2 Mtrs height with locking arrangement, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of acrylic emulsion with silicon additives paint to the structure including roof slab and epoxy paint to internal surface & anti-termite treatment for underground parts of the structures and giving satisfactory water tightness test as per I.S. code, The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-charge.
Notes
1. The design of the structure be in accordance with relevent (I.S.3370 - 1965 or revised)
2. The design shall satisfy the stipulation as per IS 1893-1984 and I.S. 13920/1993 for seismic focrce and I.S.- 11682/1985 for R.C.C. staging of overhead tanks.
3. For design having more than 6 columns, Providing of internal bracing is obligatory,. External bracking is also obligatory.
4. The entire structure shall be in M 300 mix only.
5. Plain round mild steel bars grade - I confirming to I.S,432 Part-I or high yield strengh deformed bars confirming to I.S. 1786 or I.S. 1139 shall be used, grade-II mild steel bars will not be allowed.
6. Irrespective of the type of foundation proposed in the design, one set of bracing be provided at the gound level.
7. These rates include providing, M.S. ladder for E.S.R's upto 2 lakhs liters capacity and providing sprial staircase for E.S.R. above 2 lakhs liters capacity.
8. Stagging shall have to be designed with stresses of M-250 for ESR. However all RCC construction should be done in M-300
9. These rates are including the cost of uplift pressure if any and entire dewatering during execution. In case of water logging area where water is struck at shallow depth extra provision of dewatering shall be made as per site condition.
10. All condition given in the Member Secretary"s Circular No.MJP/TS-I/350/1668 dt. 2.8.97 and MJP/S-I/350/2127 dt. 13.7.99 shall be strictly followed and additional cost, if any due to these conditions is included in the rates mentioned below.
11.. 75% part rate shall be payable for reinforced cocnrete and plastering items of containers of E.S.R. till satisfactory hydraulic testing for water tightness is given ; and till that work shall be treated as incomplete.
1
3838159
3838159.25
... More
Item No 7
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or asdirected by Engineer-in-charge including normal dewatering, centering,form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and
even surface wherever necessary or roughening if special finish is to beprovided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
Slabs / Landings / Vertical Walls / Waist Slabs / Steps for Staircase
Beams/Braces for average total beams in long side are 8 Nos and for short side 6 Nos
Below GL
lift 10 m to 15 m from RL 475.00 to RL 480.00
262.82
3229402
12287.6
... More
Item No 14
Providing neeru finish to plaster surface in all positions including scaffolding and curing complete.
101.32
6585
65
... More
Item No. 14: Providing and laying in situ Cement concrete of trap/granite/ quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, 'plywood form work, bully/ steel propups, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (excluding M.S. or Tor reinforcement)
RCC M-200
13.1
101552
7751.53
... More
Item No. 12: Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
3254.65
287060
88.2
... More
ItemNo 10
Dewatering charges for estimation purpose for head works in river basin or dam
d) Jack well dia for 6 m dia for 6.0 m dia of jackwell, area is 28.27 sqm area of proposed jack well = 15 x 15 = 225 Sqm
24000
1848000
77
... More
Providing and casting in situ C. C. of trap / granite / quartzite/ gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, ,plywood form work,bully/steel prop ups compaction, finishing the formed surfaces with C. M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever nesessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) For RCC M-300 grade Beams/Braces/LintelsAbove GL
lift 0 to 5 m for Beams
88.5
845496
9553.63
... More
iii) for Wash Water & Blower Panel for Three WTP
6
216948
36158
... More
32) RTU (Remote terminal control & communication unit at each GSE/ESR)
Design, manufacture, supply, installation, testing and commissioning of indoor type PLC panel of size approx. 800 mm X 700 mm X 800mm (LBH) , fabricated out of min. 2 mm thick CRCA sheet powder coated to Siemens gray color. The Panel shall be provided with reputed make PLC with following accessories as well as input output configuration. The PLC shall be programmed with IEC 61131 standards for control, monitoring and communication of equipments & instruments at GSR/ESR Tank.PLC shall have Ethernet port & protocal for
Modbus TCP communication with following IO DI –16 num DO – 16 num AI –2 num AO – 1 num.
The panel shall include all the accessories (not
limited to following) to achieve purpose of
smooth & trouble free operation at GSR/ESR
functionality. Digital Flow Indicator-1 num Digital TDS Indicator – 1 num Led Level Indicator – 5 levels MCB 4A DP – 4 num 24 VDC Power Supply 10A – 1 num Push Buttons – 4 num Selector Switch - 1 num Control Relay –2 num Electronic Hooter – 1 num Control Transformer – 1 num Emergency PB – 1 num Panel Cooling Fan – 1 num
Panel Light with Door Switch – 1 num Wiring +
TB etc – 1 lot Hardware – 1 lot
For FCV 600 mm
For FCV 400 mm
3
251100
83700
... More
Item No 6
Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering,plywood form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla
Gold, Manikgad, Rajashree, etc. cement is permitted.)
For R.C.C. (M-30) grade
89.96
780012
8670.28
... More
Subwork No 18 - Solar Installation at Jackwell
Solar for Raw Water a) Scope of work covers Design, Supply, Installation, Testing, Commissioning and five years comprehensive warranty Maintenance and Operation of Grid Connected SPV Rooftop Plant under Net Metering without battery or with the battery backup for 1 hour of the connected load as per the technical specification given in this bid. b) Wiring upto Distribution Board from the SPV Rooftop system will be in the scope of the successful bidder(s). The maximum cable length of 25m for every solar power plant installed shall be in the scope of the bidder and supply of excess cable length if required shall be provided by consumer/beneficiary.
d) The empanelled installer will collect firm work order from the MSEDCL. A copy of Work Order, Invoice, Commissioning report Statement of Expenditure, Joint Inspection Report, Net Metering Work Completion & Synchronization reports, installed system photographs, beneficiary photo, aadhar card, mobile no & Electricity bill and bill of material has to be submitted to MSEDCL for release of CFA of MNRE.
999
35850114
35886
... More
Item No 14
Providing and laying in situ cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering,plywood form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) M-200
Thrust Block /Anchor Blocks
61.09
451188
7385.63
... More
iii) Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CBJT/ HT
2
38991
19495.35
... More
vii)Supplying and erecting street light Wall bracket made from 40 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB
12
10357
863.1
... More
Item No 15
Providing neeru finish to plaster surface in all positions including scaffolding and curing complete.Same as per internal plaster
555.5
36107
65
... More
14) Other Accessories
Operator work station with Furniture Desk, Storage cupboards, Chairs etc complete.
1
82243
82243
... More
Item No 16 Hydraulic testing of C.I./D.I. pipe line to
specified pressure including cost of all
materials and labour and water for testing
for specified length including cutting,
placing end cap making arrangement for
filling safe water using reciprocating type
pumps which should be able to provide
specified test pressure gauges and other
necessary equipments, labour, operation
charges, etc. required for testing. The
rate under this item shall also include cost
of retesting, if necessary and reinstating
to original position using water supplied
by the contractor
1000 MM dia DI pipe
5.56
764812
137581
... More
Item No. 10:
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing theformed surfaces with C.M. 1:3 of sufficient minimum hickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
1.08
11321
10482.58
... More
iv) From MCC to 60 HP ATS Starter -4 & Starter to Pump
30
10206
340.2
... More
Item No 16
Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9mm with lock plate of 3.15 mm thickness reinforced with 35x35x5mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar suspension shaft of minimum 32mm diametre, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248 - 1979) Spec. No.: Bd T-55 Page No. 510 b) with mechanical gear
13.5
71658
5308
... More
Item No 22
Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak proofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.
51.92
61045
1175.77
... More
1000 mm dia D.I K 9.pipe- ( Outlet)
1
844584
844584
... More
Item No. 5 :- NON RETURN VALVE
Supply, erection, testing & commissioning of ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.
Reflux valves as per I.S.5312 Part I (1984) With by pass arrangement
a) 450 mm dia, PN-1 For Subhash Nagar ESR Common Header
1
120595
120595
... More
From LT Panel to Trafo 1 3.3/.433 (Marshalling box )
30
5190
173
... More
xii) Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
12
2180
181.65
... More
Item No. 12: Providing Second class Burnt Brick masonry with conventional / IS type bricks in cement mortar 1:6 in superstructure, including bailing out water manually, striking joints on unexposed faces, racking out joints, scaffolding etc. complete.
45.66
387410
8484.68
... More
500 mm
6
57922
9653.7
... More
8) Multifuction Meter
Supplying and erecting LT CT multifunction DLMS compliance energy meter of accuracy of class 0.5 , 3x240V,50 Hz with optical & RS 232 port, backlit LCD, measure & display trivector energy, load survey, TOD, tamper detection & logging, power ON /OFF events, instantaneous parameters of rating 1/5 A with display in absence of power complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box and connected to CTs.
13
146478
11267.55
... More
Lowering laying and jointing with SBR rubber gaskets C.I. S.S./D.I. Pipes of various classes with CI/MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-Charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour, giving hydraulic testing etc. complete.
Note : only SBR Rubber gaskets to be usedAbstract for DI K7 pipe
b) 200 mm dia
687
81512
118.65
... More
v) For Proposed MBR Rising main 400 mm
1
348030
348030
... More
Item No 8
Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundation, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Tor steel Fe-500
84.65
8228487
97206
... More
Item No 9
Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523. For all types of specials, bends tees etc.
46205.55
8594232
186
... More
Item No.30 :- Air Vessel
Designing, Providing, Laying and commissioning of Air Vessel on Raw Water Rising Main of Dia. 900mm
1
8835808
8835808
... More
Item No.18 :- Temparature Scanner Panel Providing, erecting and commissioning Temperature Scanner for VT Pump including panel size 800mm X 800 mm x 300 mm complete
1
138426
138426
... More
Item No 10
Providing and supplying at site ductile iron /Spheroidal Graphite (S.G.) iron single /Double chamber tamper proof air valve without isolating sluice valve. Valves in accordance with BSEN 1074-4 of PN 10/16 rated, with body and bonnet of ductile iron confirming to EN 1563/IS 1865 Gr. 500/7 or Gr.400/15 floats, float guide, seat ring of stainless steel 1.4436/1.4306, seat ring gasket of WRAS approved EPDM rubber (suitable for drinking water), internal fasteners of stainless steel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Flange connections as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14845. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16)
Kinetic Air Valve Flanged
Type PN-1.6 ne @ every Km of pipeline Plus additional 4 Nos for 2 Railway crossings
200 mm
11
497970
45270
... More
Item No 12
Providing & fixing in position Steel bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete.
16.13
1567738
97206
... More
During Fifth year (7% of total cost)
1
2077846
2077846.82
... More
Excavation in general in hard material comprising of soft rock, hard rock, Manjara rock, etc, by blasting / controlled blasting, chiselling as required in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in-charge, excluding refilling. lift 12 to 12.5 m from RL 474.00 to RL 473.50
173.18
214744
1240
... More
b) Relay Metering Panel at Jackwell Designing, providing, erecting, commissioning, relay metering panel,from 11 KV outdoor VCBs and scanner arrangement for Transformer as per detailed specification
1
628674
628674
... More
10) Thermostat with 1 NO + 1 NC for Oil temperature.
11) Door interlock switch with 1 NO + 1 NC. 12) Control fuse.Starter for Motor HP / Contactor Rating "Starter for Motor HP / Contactor Rating "Main/ Start/ Run". 100 HP For Proposed 18.5 MLD WTP
2
351938
175969
... More
Item No 9
Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and
alignment as directed by Engineer-incharge including conveyance of material from stores to site of work, including cost of jointing materials and rubber
rings labour etc. complete.
DI pipe 1000 MM dia
5559
5069808
912
... More
Subwork No 19 - Running The Scheme On Trial Basis Commisioning running and maintaining the scheme to quantites, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and 3 months for regional scheme, together with training of personnel spared by MJP/ Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge.
For regional scheme upto 3 villages trial period shall be one year with raw water pumping, one treatment plant with pumps, raw water pumping main, leading main, ESR, BPT and distribution system, etc. (For one year)
12
693428
57785.7
... More
Item No 16
Providing sand face plaster externally in two coats using approved screened sand in all positions, including providing base coat of 15mm thick in cement mortar 1:4 mixing approved water proofing compound at the rate of 1 kg./ 50 kg. of cement and curing the same for not less than two days and keeping the surface of base coat rough to receive the sand faced treatment 8mm thick in cement mortar 1:4 and finishing the surface by taking out grains and curing for 14 days including preparing the surface, watering and scaffolding etc. complete.
292.86
190004
648.79
... More
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, plywood form work,bully/steel prop ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement
Lift 5-10 Mtr
12.56
140939
11221.3
... More
Item No.28 :- M.S Chequered Plate
Providing and fixing M.S. chequerred plate flooring of following thickness supported on M.S. angles (25 x 25 x 5 mm size) including welding, cutting and fabricating the plates to the required square or rounding shape, making holes in the plate, including providing and applying 3 coats of anticorrosive paint, etc. complete as directed by Engineer-in-charge.
50
216563
4331.25
... More
7 Signal Cable
Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing of as per IS 694 copper shielded, twisted, multi stranded armoured cable on wall in GI tray or on ground.
i) 2 Pair X 1 Sqmm
200
39800
199
... More
From HT Panel to X'mer 1,22/3.3 (Protection )
30
18030
601
... More
ii) 3 Pair X 1 Sqmm
300
75900
253
... More
Item No. 11 b :- MAKING FLANGES
Providing and making flanged joints to flanged C.I./M.S. pipes of all classes/specials etc. including cost of all jointing materials (rubber packing, nut bolts, etc.), labour, hydraulic testing etc. complete.
a) 1000 mm dia
2
14230
7115
... More
Item No 11
Providing and supplying ISI mark CI D/F
reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway agon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984)Without by pass arrangement - PN -1.6
800mm
6
2901276
483546
... More
Item No 11
Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible).
ii) Casing pipe = 1300 mm dia 18mm thick
207
12407269
59938.5
... More
Item No 6
Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete.
-
-
-
... More
From HT Panel to X'mer 2, 22/3.3 (Protection)
30
18030
601
... More
Item No. 14:
Providing neeru finish to plaster surface in all positions including scaffolding and curing complete.
151.45
10331
68.22
... More
3) Turbidity Analyser
Design, Supply, Installation, commissioning, testing of Turbidity Anayser as per ISO 7027 scattering light method at A.F. and Interfacing with PLC panel. Turbidity analyser shall comprises of 3 components i.e. sensors,signal distributor and transmitter with indicator. with 2 Outputs, 1 to PLC & anather to Local Display with mounting arrangement.
Overall Range : 0 ‐ 2000 NTU Accuracy : +/ ‐ 0.02 NTU Supply Voltage : 230 V ac Output : 4 ‐ 20 mA /HART
4
1018068
254517
... More
3) From Proposed 18.5 MLD WTP to Proposed Paranda Road ESR 3 - 4.60 Lakh lit.
Discharge : 28 LPS Head : 27 Mtr
Operating Head Range :- 20-30 mtr
Motor rating : 20 HP
2
128910
64455
... More
c) Square Bar Rail
Providing, erectung and fixing square bar on EN 8 as rail for over head crane on provided track, girder / continuous corbel beam, including supporting plate and "J" bolts.
50 x 50 mm (EN 8)
60
132060
2201
... More
Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operationcharges, etc. required for testing. The rate under this item shall also include cost of retesting, ifnecessary and reinstating to original position using water supplied by the contractor.
Dia of pipe : 800.00 mm DI K9
1.12
80049
71793
... More
b) 80 mm dia i) On Common Header (Proposed MBR )
ii) On Common Header (Existing Paranda Road ESR)
2
962
480.9
... More
Item No. 13: Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
1675.73
147799
88.2
... More
Item No 29
Providing and applying epoxy paint of approved make (Shalimar, Ciba or Mahindra & Mahindra) to concrete surface for RCC ESR or GSR or any other structure including cleaning the surface by scrapping and air blowers to the satisfaction of Engineer-in-charge, necessary scaffolding, etc. complete with all leads and lifts and giving satisfactory hydraulic test for water tightness as per I.S. codes.
For New surfaces - Two Coat
Upto Full Reservoir Level
1386.62
1019169
735
... More
From HT Panel to X'mer 2,3.3/0.415 (Protection )
30
18030
601
... More
Subwork 3 Jack Well & Pump House
Item No 1
Excavation in general in soft material comprising of soft soil, soft murum, sand, hard murum with boulders in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, Supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricating, gurading, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in- charge, etc. complete excluding refilling. For Head Works on river or dam submergence for initial lift of 0 to 1.5 M lift 0 to 1.5 m from RL 486.01 to RL 484.500
990.78
459723
464
... More
1000 mm DI K9 (Over Flow Pipe)
15
842400
56160
... More
Item No 16
Pipe Casing HDPE Spacer
207
449604
2172
... More
a) 300 mm dia.
3
1519137
506379
... More
iii) PMCC-3 to Ex.19 MLD WTP Incoming Panel ( 1 run)
100
51870
518.7
... More
Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor.
d) 300 mm dia
0.04
751
18779.25
... More
i) L.T. Panel (PMCC-3 ) for Ex. 19 MLD WTP & Pure Water
1
301965
301965
... More
Item No 9
Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523.
For all types of specials, bends tees
etc.
113188.29
21053022
186
... More
3) PLC panel for Raw water pump House with four Pumps
Design, manufacture, supply, installation, testing and commissioning of indoor type PLC panel of size approx. 1000 mm X 700 mm X 1500mm (LBH), fabricated out of min. 2 mm thick CRCA sheet powder coated to Siemens gray color. The Panel shall be provided with reputed make PLC with following accessories as well as input output configuration. The PLC shall be programmed with IEC 61131 standards for control, monitoring and communication of equipments & instruments at Raw water Pumphouse.
PLC shall have Ethernet port & protocal for Modbus TCP communication with following IO
DI –16 num
DO – 16 num
AI –16 num
AO – 8 num
7 inch color TFT HMI complete with programming shall be provided to interact with PLC.
The panel shall include all the accessories (not limited to following) to achieve purpose of smooth & trouble free operation of pump house.
MCB 10A DP – 1 num
MCB 4A DP – 4 num
24 VDC Power Supply 10A – 1 num
Push Buttons – 7 num
Selector Switch - 2 num
Control Contactor – 4 num
Annunciator with 6 Windows NO to NC Type
Electronic Hooter – 1 num Control Transformer – 1 num
Emergency PB – 1 num
Panel Cooling Fan – 1 num
Panel Light with Door Switch – 1 num Control
Indication Lamp – 5 num
Wiring + TB etc – 1 lot Hardware – 1 lot
1
214900
214900
... More
Item No. 22 :- CABLES
a) 3 Core,185 Sq mm XLPE armoured cable
i) Supply, erection, testing & commissioning of
H.T. cable as below
a) Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(UE), 3 x 185 sq. mm. aluminium conductor laid in provided trench / pipe
i) 11 KV DP Pole Structure to Metering Cubical Panel (2 Run)
100
254835
2548.35
... More
Item No 12
Lowering, laying, jointing in position following CIDF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves )
Scour Valve
-
-
-
... More
Subwork No 9
Raw Water Gravity Main 1000mm Dia DI K7 PipeLine Item No 1
Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum,hard murum and boulders, W.B.M. road,soft rock and old cement and lime masonry foundation asphalt road ,hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, including removing the excavated material upto a distance of 50 metres , stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
19122.96
6616276
345.99
... More
Item No. 3 :- PRESSURE GAUGE
Providing erecting jointoing Glyscerine filled Pressure gauge of required capacity complete with syphon tube isolated cock suitable for 100 mm dia G I pipe glyscerine filled Pressure gauge as per IS 3624:1987 shall be installed as directed with tapping on rising main.etc complete. as per detailed specification attached .
Glyscerine Filled Pressure Gauge Bourden Type (100 mm dia)
16
22112
1382
... More
ii) Fixed Type HT Capacitor for Correction Transformer PF
Supplying and erecting bank of All Polypropylene capacitors with the standard capacities of 75,84,1 16,133 and 167 KVAR lInits of power factor correction for operation on 3 phase, 50 Hz, 3300 V+/- 6% with externally discharging resistances, earthing terminals and built on angle iron on channel iron frame work and provided with terminal cover box, J-H. bushing bus bar and HRC fuses etc complete erected and tested
80 KVAR each on Both side of Transformer
160
109680
648
... More
12) Communication Cable
Supplying and fixing cat-6A LSZH cable suitable for LAN / WAN as per specification complete.
500
40425
80.85
... More
iii) Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole
16
61891
3868.2
... More
ii) Metering kisok to RMU I/C
50
80640
1612.8
... More
Providing, erecting electric Valve actuators totallyenclosed, weather-proof and dust proofconstruction with IP-67, protection class suitablefor installation in any position without lubrication,leakage or other operational difficulty with specialgrease filled gear box and hand wheel foremergency manual operation which willautomatically dis-engage on restoration of powerto motor and with 10 watt single phase spaceheater and contineous local mechanical positionindicator and individually replaceable counter gearassembly and with two torque and four limitswitches with S.S. flap and operated with geardriven cams and of rating 250 Volt, 5 Amp, AC/DC, torque switch dial and with TEFC squirellcage induction motor working on 440 Volts +/-10%, 3 phase, 50 Hz AC of intermittent duty ratingS-2, insulation class "F" and temp rise restrictedto class "B" with IP - 67 protection class suitablefor DOL starting and with three thermostat and 30% over load margin. The torque rating of reductiongear box shall be atleast 1.5 times max. torque required for opening and closing of valve.Electric Valve Actuator with non rising spindletype sluice valve, PN 1.6 ratingii) 500 mm dia, PN - 1.6 for Pump discharge Pipe
3
392961
130987
... More
Lowering, laying and jointing in position following C.I.D.F Reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. (Rate for all class of valves.) Note: Only 75% rate is payable till satisfactory hydraulic testing is given.
i) Sluice Valves
c) 450 mm dia
1
9322
9322.95
... More
Item No. 11: Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum)
81.13
534019
6582.59
... More
Item No. 16:
Lowering laying and jointing with SBR rubber gaskets C.I. S.S./D.I. Pipes of various classes with CI/MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-Charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour, giving hydraulic testing etc. complete.
Note : only SBR Rubber gaskets to be usedAbstract for DI K7 pipe
a) 150 mm dia
35
3160
90.3
... More
Lowering, laying and jointing in position following C.I.D.F Reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. (Rate for all class of valves.) Note: Only 75% rate is payable till satisfactory hydraulic testing is given.
i) Sluice Valves
b) 200 mm dia
1
3899
3899.7
... More
Item No 11
Providing & fixing in position Steel bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete.
3.85
374631
97206
... More
Item No 9
Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary cleaning and preparing the surfaces, watering for two days complete. Spec.No.: Bd.O. 8 Page No. 406
36880
2913520
79
... More
Item No. 14 :
Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A-9/261)
a) By using 3 H.P. Pumps
432
34927
80.85
... More
From HT Panel to OLTC For Motor ,Tc Suply ,Oltc Local, remote etc.
40
24040
601
... More
Item No. 22:
Asphalt Road restoration: Reinstatement of road by excavating the potholes in rectangular shape and filling of potholes by one layers of one layer of 80 mm trap metal of 200 mm thick, one layer of 40 mm trap metal of 100 mm thick including supplying and spreading of stone dust/murrum of 100 mm thick, watering compaction and 75 mm thick bituminous bound macadam with cold emulsion 60/70 grade and bituminous macadam of 50 mm thick with bitumen of S-65 grade and 20 mm thick asphalt concrete with S-35 grade of bitumen including compaction by vibratory roller of all layers and providing and applying tack coat of 50 Kg / 100 m2 on black top surface and seal coat of 1kg/sqm. B.B.M. surface and disposal of surplus soil etc., complete. for pipeline trenches of various diameter etc., complete as per specifications and or as directed by engineer- in-charge.
4197.83
4302775
1025
... More
11) Power Cable
Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU
500
58275
116.55
... More
Item No. 4:
Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite /gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete.
(Cement 5.90 bags / cum)
5.29
34835
6582.59
... More
Item No 7 (A)
M.S. Pipes & Specials Manufacturing, providing and supplying double flanged M. S. pipes (Commercial Quality) including procurements of plates,
gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). 8mm thickness
19809
1881855
95
... More
Item No. 22: Disposal of surplus excavated materials upto specified lead and all lifts including loading, unloading, stacking and spreading as directed by Engineer-in-Charge etc. complete Lead beyond 2.0 km but Upto 5.0 Km
392.67
141380
360.05
... More
c) 300 mm dia, PN-1
8
162824
20353
... More
6) For Calriffaculator drain (For proposed 18.5 MLD & Existing 19 MLD WTP)
250 mm
2
208458
104229
... More
From LT Panel to HT Panel i/c 2 (Control Circuit 3.3KV)
30
5190
173
... More
ii) 200 mm x 75 mm
75
55046
733.95
... More
Item No. 15 :- STARTER
a) Auto transformer Starter with air break contactor Providing erecting and giving test and trial of Fully Automatic, Auto Transformer Starter with Air Break Contactor, assembled locally with contactors of approved make in 14 SWG sheet steel fabricated, floor mounted type cubical panel, suitable for operatioperation on 380 - 440 Volts, 3 Phase, 50 Hz, fitted with accessories as below. The incoming and outgoing cable end bo including first fill of oil.xes shall be on either sides of main panel. The cable entries from auto transformer shall be totally enclosed in sheet metal The starter shall have screened louvers on both sides Oil immersed copper wound auto transformer with 50%,65%, and 80% tapping
1) Oil immersed copper wound auto transformer with 50%,65%, and 80% tapping including first fill of oil 2) All Air Break Contactors of AC 3 duty of suitable rating as mentioned.
3) Bimetallic overload relay
4) Timer ON and OFF delay.
5) Master timer.
6) Ammeter with CTs and selector switch.
7) No Volt release 8) Motor 'ON", "OFF" and "TRIP"indication lamp. 9) Motor Protection Relay, solid state with protection CTs.
-
-
-
... More
a)Star Delta Starter
From Proposed 18.5 MLD to Existing MBR ( 1W+1 Stby)
From Proposed 18.5 MLD WTP to Existing Mhada Colony ESR ( 1W+1 Stby)
From Proposed 18.5 MLD WTP to Proposed Paranda Road ESR 3 ( 1W+1 Stby)
20 HP
6
66126
11021
... More
Lowering laying and jointing with SBR rubber gaskets C.I. S.S./D.I. Pipes of various classes with CI/MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-Charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour, giving hydraulic testing etc. complete.
Note : only SBR Rubber gaskets to be used
MS for DI K9 pipe
b)400 mm dia
520
131586
253.05
... More
ii) Metering Cubical 1 & 2 Panel to RMU (1 run)
100
254835
2548.35
... More
Item No 7
Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edi tion/revision with amendments for Rubber Gaskets DI K9
-
-
-
... More
Sluice valve
800mm
5
2090340
418068
... More
11) UPS system Supplying, erecting, testing and commissioning of 2kVA capacity online pure sine wave, with backup time of 30 hrs. PWM & IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS
2
102864
51432.15
... More
Item No.9:
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, inishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
5.41
56659
10473.13
... More
ii) PMCC-2 to EX.8.5 MLD WTP Incoming Panel ( 1 run)
100
51870
518.7
... More
b) Travelling Trolley
Providing, erecting Travelling Trolley of capacity as below with 6 m lift, tested to 50% over load
1
15095
15095
... More
iii) Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification
31
211119
6810.3
... More
Subwork No 6 - Panel Room
Item No 1
Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc.
complete.
For Foundation depth 1.5 m
For Lift 0 to 1.5 m
77.76
11664
150
... More
16) Copper Plate Earthing
Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP
10
61656
6165.6
... More
Item No 4
Dewatering charges for estimation purpose for head works in river basin or dam
a) Approach channel
50
310950
6219
... More
Transformer 2 Outgoing Feeder 11 KV to 3.3 Kv HT Panel I/C 2 (2 Run)
80
143136
1789.2
... More
b) 80 mm dia i) On Common Header (Proposed MBR ) ii) On Common Header (Existing Paranda Road ESR)
2
24038
12019
... More
Item No 20
Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operationcharges, etc. required for testing. The rate under this item shall also include cost of retesting, ifnecessary and reinstating to original position using water supplied by the contractor.Dia of pipe : 800.00 mm DI K9
22.89
1725131
75382.65
... More
From LT Panel to Trafo 2, 22/3.3 (Marshalling box )
30
5190
173
... More
From HT Panel to X'mer 1, 3.3/0.415 (Protection )
30
18030
601
... More
Scour Valve PN1.6
500 mm
1
136942
136942
... More
Subwork - 20 Road Reinstatement
Asphalt Road restoration: Reinstatement of road by excavating the potholes in rectangular shape and filling of potholes by one layers of one layer of 80 mm trap metal of 200 mm thick, one layer of 40 mm trap metal of 100 mm thick including supplying and spreading of stone dust/murrum of 100 mm thick, watering compaction and 75 mm thick bituminous bound macadam with cold emulsion 60/70 grade and bituminous macadam of 50 mm thick with bitumen of S-65 grade and 20 mm thick asphalt concrete with S-35 grade of bitumen including compaction by vibratory roller of all layers and providing and applying tack coat of 50 Kg / 100 m2 on black top surface and seal coat of 1kg/sqm. B.B.M. surface and disposal of surplus soil etc., complete. for pipeline trenches of various diameter etc., complete as per specifications and or as directed by engineer- in-charge. MS Pipe
From CH. 2023 to CH. 2283 m
900mm dia From CH. 69182 to CH. 71230 m
1000 mm dia
5051.6
5177890
1025
... More
Item No 6
Providing, supplying and erecting Kinetic Double Orifice type Air Valves confirming to IS 14845 as per MJP’s standard specifications combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, thirdparty inspection charges, loading, unloading,transportation upto departmental stores, excludingGST levied by GOI & GOM in all respect etc.complete. 150 mm dia, PN -1.6 for Common Header
2
59463
29731.4
... More
ITEM No.3
Providing and supplying ISI standard DI specials and fitting with seal rubber gasket of SBR complete with cast iron follower gland and MS nut bolt coated or otherwise protected from rusting and suitable for DI pipes including cost of labour materials and transportation to store/site,loading unlaoding exluding GST levied by GOI and GOM in all respect,complete as per IS -9523 .For all type of specials, bends and tees etc. For all types of specials ,bends tees etc .
300 mm to 500mm dia
300
55800
186
... More
Item No. 26 :- ELECTRIFICATION
i) Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WGPW/ SW
14
5366
383.25
... More
Item No.2:
Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts asbelow, stacking as directed by Engineer-in charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259)
For Lift 0 to 1.5 m
17.64
10594
600.6
... More
Item No. 11: Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and
compaction, etc. complete. (Bd-A-11/263)
22.64
19702
870.45
... More
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or asdirected by Engineer-in-charge including normal dewatering, centering,form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and
even surface wherever necessary or roughening if special finish is to beprovided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
lift 5 m to 10 m from RL 480.00 to RL 485.00
226.32
2549127
11263.6
... More
Item No. 11 : C.I. Sluice Gate with Actuator
Providing, erecting, testing & commissioning ofCast iron wall thimble mounted sluice gates with Actuator of size 2300 (w) mm x 2500 (h) mm as per IS 13349-1992standard, electric actuator operated with positionindicator, suitable for 20 m seating as well asunseating type operating water head, 20 m CL-PLdistance, rising spindle, upward opening, flushbottom closure arrangement, non-self-containedtype open top flange back frame gates. (DesignHead: 20 m). complete including taxes and dutiesbut excluding GST.
-
-
-
... More
Item No 4
Providing and laying dry trap metal soling 15 cm. to 20 cm. thick including hand packing with metal, rubble chips, application of required murum/stone dust blindage and compaction including watering etc. complete with all leads, including necessary heavy dewatering either mechanically or manually etc. complete
Below Footing
For Plinth beam
Soling below cable trench
17.87
22113
1237.45
... More
Item No. 24 :-APFC Panel for Proposed WTP & Existing 8.5 MLD & Ex 19 MLD WTP
a)Supplying and erecting 100 kVAr, 3 phase, 50 Hz., Power contactors Derated for microprocessor APFC controller with MPP / APP type capacitor with 525
V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps
of MPP /APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC
1
400547
400547
... More
e) 150 mm dia, PN-1 For Existing Mhada Colony ESR Common Header Pump serving to Existing MBR . Pump serving to Mhada Colony ESR
5
54415
10883
... More
vi)Supplying & erecting FRP box of size 150 x 125 x 100 mm, 2.7 mm thick complete on pole/wall as per specification no. CBSB
16
8333
520.8
... More
INR No 24 a
Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A 9/261)
2400
184800
77
... More
d) 200 mm dia, PN-1 Pump serving to Existing MBR For Existing MBR Common Header For Proposed Paranda ESR 1 & 2 Common Header
4
81160
20290
... More
28) cable for WTP
14 core 1.5 sq mm Copper conductor PVC insulated, armoured control cable
600
293400
489
... More
Item No. 18: Valve chamber with Precast SFRC frame and covers.
Providing and Constructing B.B. Masonry valve chamber with 15 m thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 proportion 12 mm thick cement plaster in C.M. 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-Charge. (Note : Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2M).
As above of 1.2 x 1.2 m internal size and depth upto 1.5 M with SFRC frame and cover of size 540 mm dia fixed in RCC slab
3
76456
25485.6
... More
33) Dismantling joint
Providing, erecting and commissioning M.S. Dismantling joint as per requirement and Department's approved drawing and specifications, including machining and rubber rings and suitable for 16 kg/cm2 working pressure
i) For 18.5 MLD Proposed WTP (FM & FCV)
600 mm
2
132772
66386
... More
Item No 21
Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonary surfaces in all positions with base coat of 12 to 15 mm thick in CM 1:4 and rough cast treatment 12 mm thick in Cm 1:1.5:3 including centering, scaffolding and curing for 14 days etc complete.
1677.04
1088045
648.79
... More
iv) Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification
no. EA-EP
465
431125
927.15
... More
b) Supplying and erecting HT CT multifunctionDLMS compliance of accuracy of class 0.5 ,3x63.5V,50 Hz with optical & RS 232 port,backlit LCD, measures kWh, kVAh, V, I, kW, 6months history of energy , load survey, &displays trivector energy, load survey, TOD,tamper detection & logging, power ON /OFFevents, instantaneous parameters of rating 1/5A with display in absence of power completewith zero adjustment & test certificate frommanufacturer erected on provided M.S. box.displays trivector energy, load survey, TOD,
2
27134
13567.05
... More
Item No 28
Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M.S. angles as verticals at 1.5 M c/c and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc. complete.
Around the Jackwell
128
117248
916
... More
150 mm
12
17992
1499.4
... More
Providing and supplying ISI standard welded DI double flanged pipe including all taxes (central & local) railway freight, insurance, unloading from railway wagon, loading into truck transport to store / site, unloading, stacking etc. complete as directed by Engineer -in- cahrge. (for 2.75 m bare pipe)
500 mm DI K9 (Over Flow Pipe)
30
533820
17794
... More
Item No 31
Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as ringers and 16 mm dia M.S. bars in double ows as steps placed at 25 cm c/c including cost of material and labour involved, welding, anchoring and applying 3 coats of anticorrosive paint, etc. complete as directed by Engineer-in-charge.
45
67185
1493
... More
b) 350 mm dia, PN-1 For Proposed MBR Common Header
1
6494
6494.25
... More
f ) Supplying and erecting armoured control cable with ISI mark stranded / solid copper conductor 1.1 kV grade complete erected on wall / panel or in provided trench in an approved manner.3 Core,1.5 Sq mm CU XLPE armoured cable
For Ultrasonic level sensor
150
19500
130
... More
200 mm DI K9 (Over Flow Pipe)
1
18581
18581
... More
v) For Proposed MBR Rising main (FM)
400mm
1
36921
36921
... More
Item No 06 :
Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M 150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attched)
200 to 400mm
6
41170
6861.75
... More
Automation Work of Jackwell
1) Ultrasonic level Transmitter
Ultrasonic level transmitter raddar type level transmeter for raw water pumping station Designing, Supplying, Installing, commissioning & testing of Ultrasonic Raddar type Ultrasonic level transmitter CE marked with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including mounting arrangement. Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4" LED Range- 0 to …30... mtrs Accuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 Mounting - On PLC panel
1
68908
68908
... More
Item No 29 Hydraulic testing of C.I./D.I. pipe line to
specified pressure including cost of all
materials and labour and water for testing
for specified length including cutting,
placing end cap making arrangement for
filling safe water using reciprocating type
pumps which should be able to provide
specified test pressure gauges and other
necessary equipments, labour, operation
charges, etc. required for testing. The
rate under this item shall also include cost
of retesting, if necessary and reinstating
to original position using water supplied
by the contractor
1000 MM dia DI pipe
41.67
6019794
144460.05
... More
Lowering, laying and jointing in position following C.I.D.F Reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. (Rate for all class of valves.) Note: Only 75% rate is payable till satisfactory hydraulic testing is given.
i) Sluice Valves
c) 250 mm dia
2
10161
5080.95
... More
Item No 24
Refilling the trenches with available
excavated stuff with soft material first over
pipeline and then hard material in 15 cm
layers with all leads and lifts including
consolidation, surcharging, etc. complete.
216.67
18200
84
... More
x) From FCMA Starter to 3.3 kv Pump (3 nos)
120
305802
2548.35
... More
Item No. 17:
Providing and fixing rolling steel shutter fabricated from 18/19 gauges steel laths with side guides, bottom rail, brackets, door suspension shaft, including rolling springs, locking arrangement and mechanical gear operation arrangement and one coat f red lead primer etc. complete.
24
133697
5570.75
... More
ItemNo 7 (C)
Dismantling Joint
Providing, erecting and commissioning M.S.Dismantling joint as per requirement and Department's approved drawing andspecifications, including machining and rubberrings and suitable for 16 kg/cm2 working pressurewith required flanges of suitable size with nut boltset complete.The joint should have through longbolts so that during normal working pressure thereshould be no sliding movement of sliding flanges.L.O.F.(length over flange ) should not be less than75% of dia.
i) 750 mm dia for Common header Pipe
1
101964
101964
... More
e) 150 mm dia, PN-1 For Existing Mhada Colony ESR Common Header Pump serving to Existing MBR Pump serving to Mhada Colony ESR Pump serving to Existing MBR Pump serving to Mhada Colony ESR
9
33737
3748.5
... More
Item No 3
Disposing surplus material beyond 5 km distance including loading, unloading and transporting etc complete
Total excavation
975
351048
360.05
... More
ii) Extra rate per metre length or part thereof over and above initial length of 10M
100
37900
379
... More
iii) Substation Fencing i) Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification no SS-AS/FS Fencing for Size : 10 Mtr x 6 Mtr Area
No of Sections : 25 No x 1.2 Mtr
25
179996
7199.85
... More
iii) Subhash Nagar ESR Rising Main (FM)
500 mm
1
54026
54026
... More
xi) D.G. Set to 3.3 Kv HT Panel I/C (2 Run)
120
305802
2548.35
... More
Lowering laying and jointing with SBR rubber gaskets C.I. S.S./D.I. Pipes of various classes with CI/MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-Charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour, giving hydraulic testing etc. complete.
Note : only SBR Rubber gaskets to be usedAbstract for DI K7 pipe
c) 250 mm dia
1186
185549
156.45
... More
Item No 4
RCC FOOTING
Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
Foundation M-250
28.13
224888
7994.63
... More
23) Surveillance system
Desiging, supplying, installing, commissioning & testing of CCTV IR water proof camera suitable for upto 100ft. with control key board, DVR, Hard Disk,cables, UPT transreceivers etc. complete with not less than following specifications 1. Four numbers of IP Camera with night vision functionality with range up to 30 meters. Camera construction shall be suitable for weather proof outdoor installation. 2. Eight Channe DVR withmetal body consturction, having software features of motion detect recording. 3. 3.5 inch 2 GB HDD 4. 8 port POE Switch 5. 32 inch LED Screen, Keyboard & mouse.
i) For 18.5 MLD Proposed WTP - 1 No
ii) For 19 MLD Existing WTP - 1 No
iii) For 8.5 MLD Existing WTP - 1 No
3
168000
56000
... More
Item No. 9 :- ELECTROMAGNETIC FLOW METER
Supply, install and commissionElectromagnetic Flow Meter (EMF) As Per ISO4064, for Raw/Pure water with accuracy+/-0.5% of measured value & protection as pergiven specifications for size 100 mm-1000mmincluding sensor, transmitter surge arrestor, cableGI duct if suitable size for 25 mtrs built in GSM (with Simcard and its charges,valid for 36 months)including the pipe cutting, leveling and installationof flow meter in the pipelines with necessary tooltackles, cranes including 36 months guarantee etc complete, as may be required at site & basedon technical specifications.
a) 1000 mm dia. For Gravity main near WTP
1
781198
781198
... More
Excavation in general in hard material comprising of soft rock, hard rock, Manjara rock, etc, by blasting / controlled blasting, chiselling as required in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in-charge, excluding refilling. For Head Works on river or dam sub mergence for
lift 6 m to 7.5 m RL 480.00 to 479.0
75
84600
1128
... More
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, plywood form work,bully/steel prop ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted ) For RCC M-300 grade - all types of columns. Below GL
lift 5 to 10 m for columns
42
449001
10690.5
... More
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or asdirected by Engineer-in-charge including normal dewatering, centering,form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and
even surface wherever necessary or roughening if special finish is to beprovided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
Above GL
lift 0 to 5 m from RL 486.01 to RL 491.01
160.61
1644597
10239.63
... More
Item No 18
Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear)
Rolling Shutter
9
47772
5308
... More
Item No 20
Providing neeru finish to plastered surfaces in a all positions including scaffolding and curing complete.Spec. No.: Bd.L. 10 Page No. 370
839.37
54559
65
... More
Item No 23
Providing double flange sluice valve
confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.
a) Sluice valves - PN -1.6 (Without by pass)
200 MM dia for isolation of Air Valve
83
1928173
23231
... More
16. Laboratory equipment.
As per requirement (to be specified during
tendering.)
17. Sanitary blocks.
Carpet area-15 square metre minimum upto 25
Mld and 25 square metre above 25 Mld.
18. Administrative block and internal road.
To accommodate office room. chlorine room, laboratory room, panel board room, blower room etc. and WBM road to connect all units from main gate of plot.
19. Rates given below are inclusive of uplift
pressure if any and dewatering during entire
work.
20. Disposal of waste from WTP: Safe disposal
arrangement to nearby nalla including cost of
pipes.
21.For WTP of capacity 30 mld and more additional arrangement for backwash water recycle shall be provided, including sump, pumping machinary, rising main etc. complete. 22. All pipes conduits channel with 20% overloading
23. These rates are applicable for seismic zones-2,3 and 4.
24. All RCC structures shall be constructed in M-300.
25. All pipes and conduits channel with 20% overloading capacity.
26. All structured steel work/ fabrication are to be provided with application of Hot Dip Zinc coating according to specification as per IS 4759:1996 (Reaffirmed 2006)
Cost of 20.50 MLD WTP
1
67080825
67080825
... More
Item No.14 : Transformer
a) Transformer 11 / 3.3 KV ,1600 KVA
Providing, erecting and commissioning indoor type copper wound transformer continuously rated for 3 Ph, 50 Hz, at full load and temp. rise not exceeding 45ºC by thermometer in oil and 50ºC by the resistance in winding after continuous run at full load rating, the transformer should have oil immersed winding having vector group DY 11, HT side connected in Delta and LT side connected in Star with neutral brought out connected to provided Separate earthing. The transformer shall have power terminal arrangement, bushing / cable end box on HT side and cable end box on LT side. 2 Nos. channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. The transformer should have following standard fittings. The OLTC should be suitable for minimum 50 operations per day. Transformer shall be of latest manufacturing standards as per amended IS specifications and the Load & No Load losses shall be limited to the values as per IS and Norms issued by MSEDC Ltd whichever are lower
2
4337420
2168710
... More
ii) 200 mm x 100 mm
100
83895
838.95
... More
Item No 6
Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete.
Murum bedding with available excavated stuff.
1200.74
100862
84
... More
Item No. 13 :
Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A-9/261)
a) By using 3 H.P. Pumps
792
64033
80.85
... More
Item No. 25 : Fixed Type LT Capacitor for Correction Transformer PF
Supplying and erecting bank of All Polypropylene capacitors with the standard capacities of I, 2, 3, 5, 7, 12.5, 15, 20 and 25 KVAR units of power factor correction for operation on 3 phase, 50 Hz, 400 V+/- 10% with KVAR terminals and built on angle iron or channel iron frame work and provided with tcrminal cover box complete erected and tested.
60
37233
620.55
... More
Item No 13
Valve Chamber
Valve Chamber with Precast RCC Covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.
Note : Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M.
RCC Valve chamber 2.5*2.5*2.0 m
5
956360
191272
... More
Item No 24 :- CABLE TRAY
a) Providing & erecting Hot deeped Galvanised ladder type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of comprising all required standard accessories.
i) 150 mm x 100 mm
100
80535
805.35
... More
From LT Panel to Trafo 1 22/3.3 (Marshalling box )
30
5190
173
... More
6) SCADA System for MBR/GSR/ESR with PLC based control valves Management system Design, manufacture, supply, installation,testing and commissioning of SCADA System for Pump House Windows based PC with latest configuration & OS complete with necessory office & antivirus softwares.
PC configuration shall not be less than Intel i5 10th Gen CPU, 16 GB Ram, 128 GB SDD, 500 GB HDD, DVD RW, Rs232 & Rs485 port, 2 RJ45 ports, Keyboard, Optical Mouse, 32 inch color TFT Monitor, Latest Windows Pro OS, Microsoft Office & Antivirus & Internet Sequrity software for 3 years license.
SCADA Software of reputed company with developer & runtime license with minimum 256 number of Tags with following features & functions 1. Supervise real-time data in the form of graphical presentation
2. Control pumping processes locally or through Remote locations 3. Dynamic process Graphic, It should resemble the process mimic. SCADA should have good library of symbols so that develop the mimic as per required. When operator sees the screen he should know what’s going in plant.
1
378000
378000
... More
Item No 8
Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523.
For all types of specials, bends tees
etc.
15099.56
2808517
186
... More
Item No 2
Providing and supplying ISI standard welded DI double flanged pipe including all taxes (central & local) railway freight, insurance, unloading from railway wagon, loading into truck transport to store / site, unloading, stacking etc. complete as directed by Engineer -in- cahrge. (for 2.75 m bare pipe)
800 mm dia D.I K9.pipe- (Inlet, )
15
578010
38534
... More
300 mm
12
25295
2107.98
... More
Item No 10
Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as
directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing theformed surfaces with C.M. 1:3 of sufficient minimum hickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)
Chajjas
1.6
15978
9986.63
... More
21) Ultrasonic Level Transmitter for Wash Water
Tank
Designing, Supplying, Installing, commissioning & testing of Ultrasonic level transmitter CE marked with following technical parameters and Interfacing with PLC panel including Mounting accessories. Range- 0 - 5 mtrs Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4" LED Accuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68
3
156993
52331
... More
iii) PCC O/G Feeder to Proposed PMCC-3 Incoming Panel (2 run)
300
281295
937.65
... More
Item No. 21:
Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years
Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including
ponding test etc. complete.
42
51783
1232.95
... More
Item No 14
Gas cutting (either square cut or V cut) pipes, plates, etc. of thickness
Above 14 mm. Upto 18 mm.
14.08
2957
210
... More
ITEM No.3
Providing and supplying ISI standard DI specials and fitting with seal rubber gasket of SBR complete with cast iron follower gland and MS nut bolt coated or otherwise protected from rusting and suitable for DI pipes including cost of labour materials and transportation to store/site,loading unlaoding exluding GST levied by GOI and GOM in all respect,complete as per IS -9523 .For all type of specials, bends and tees etc. For all types of specials ,bends tees etc .
80 mm to 300 mm dia
500
76500
153
... More
Item No 23
Providing and applying washable oil-bound distemper of approved colour and shade to old & new surfaces in including scafolding, preparing the surfaces (excluding primer coat) etc complete .Spe No Bd 5 Page No 413
839.37
40290
48
... More
iv) Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI70, CCT upto 6500K,THD10%, p.f. 0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2
16
99876
6242.25
... More
Item No. 19:
Supplying and fixing in position anodized extruded modular aluminium section Two track sliding windows mounted on rectangular frame of size 63 x 38 x 2.00mm thick (1.054kg/Rmt) made up of two track drain bottom section of size 61 x 45 x 1.3mm thick (1.055kg/Rmt) and top and sides sections of size 61 x 31 x 1.3mm thick (0.659 kg/Rmt). The shutter should be of bearing bottom of size 40 x 18 x 1.20mm thick (0.417 kg/Rmt) top member of size 40 x 18 x 1.20mm thick (0.475 kg/Rmt) interlocking section size of 43 x 27 x 1.30 mm thick (0.558 kg/Rmt) and handle section of size 43 x 18 x 1.30 mm thick (0.424 kg/Rmt) selected quality 5.5mm thick clear glass to be fixed in shutter with neoprene gasket with approved quality PVC rollers necessary locks handles PVC lining and wooden encasement wherever necessary etc. complete as directed by Engineer in charge
7.2
41401
5750.21
... More
Item No 17
Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.) Air valve - 200 mm diaFoundation in B. C. Soil or Any Other Soil
450 to 900mm dia
46
733242
15940.05
... More
Item No 7
Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete.
Murum bedding with available excavated stuff.
9000.94
793882
88.2
... More
Item No 13
Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.
For column & Beams
625.6
51893
82.95
... More
Item No 15
Providing stuctural steel work in single stanchions composed of RSJ, channel, etc, with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineer-in-charge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted/ bolted / welded connections and one coats of anticorrosive paint and over it two coats of oil painting, etc. complete. ISMB 250x250x125 for chequered flooring
1.77
123790
70017
... More
Item No 8
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.Bd.G. 1 Page No. 313
17.5
141557
8088.97
... More
Providing and casting in situ C. C. of trap / granite / quartzite/ gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, ,plywood form work,bully/steel prop ups compaction, finishing the formed surfaces with C. M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever nesessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) For RCC M-300 grade Beams/Braces/Lintels
lift 10 to 15 m for Beams
33
378325
11464.4
... More
ii) 3 Pair X 1 Sqmm
200
50600
253
... More
Lowering, laying and jointing in position following C.I.D.F Reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. (Rate for all class of valves.) Note: Only 75% rate is payable till satisfactory hydraulic testing is given.
i) Sluice Valves
d) 300 mm dia
2
10539
5269.95
... More
Item No 5
Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete.
480.59
418325
870.45
... More
Item No. 17 :- CABLES
i) Supply, erection, testing & commissioning of
H.T. cable as below
i) Supplying , erecting & terminating 3 x 120 sq. mm. aluminium 11 kV(E), XLPE armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification no. CB-HT
i) 11 KV DP Pole Structure to Meterimg Kiosk (2 Run)
100
161280
1612.8
... More
Item No 11
Providing and fixing M.S. chequerred plate flooring of following thickness supported on M.S.angles (25 x 25 x 5 mm size) including welding, cutting and fabricating the plate to the required square or rounding shape, making holes in the plate, including providing and applying 3 coats of anticorrosive paint, etc. complete as directed by Engineer-in-charge.
M.S. chaquerred plate 8 m Thick
255
1368470
5366.55
... More
500 mm
6
23168
3861.48
... More
Item No. 13 :- EPOXY PAINT
Providing and applying epoxy paint of approved make (Shalimar, Ciba or Mahindra & Mahindra) to concrete surface of RCC ESR or GSR or any other structure including cleaning the surface by scrapping and air blowers to the satisfaction of Engineer-in-charge, necessary scaffolding, etc complete with all leads and lifts and giving satisfactory hydraulic test for water tightness, film
test as per I.S. codes. a) 500 mm dia. b) 400 mm dia. c) 350 mm dia. d) 300 mm dia. e) 250 mm dia & f) 200 mm dia.
For new surfaces - Two coats.
366.56
282889
771.75
... More
h) 14 Core 2.5 Sqmm CU XLPE armoured Cable For Actuator Power & Control supply (1 Actuator x 175 mtr = 4 Nos x 150 Mtr = 600 Mtr
600
360600
601
... More
Item No. 5: Providing and supplying Air Valves as per IS- 14845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on ulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied
by GOI & GOM in all respect etc. complete.Air Valve Double Ball Flanged Type - PN -1
b) 80 mm Dia
2
15592
7796
... More
Item No 18
Valves Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.
Scour Valve PN1.6
200 mm
11
255904
23264
... More
B) Labour Part
Item No.7:
Excavation for Pipe trenches/ all types of foundation in earth, soils of all types such as sand, gravel, soft murum,hard rock and concrete road by chiselling ,wedging,line drilling by mechanical means including removing the excavted material up to distance of 50m beyond the area, stacking and spreading as directed, including all lifts preparing the bed for bed concrete / foundations etc. complete including heavy dewatering either manully or mechanically by all means up to any extent including shoring and strutting etc. complete.Note : All payments towards the fees, taxes etc. shall be borne by the contractor.
3963.88
2067718
521.64
... More
Item No. 6 :- LOWERING & LAYING SLUICE VALVE/NON RETURN VALVE
Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)
a) 450 mm dia, PN-1 For Subhash Nagar ESR Common Header
1
9323
9322.95
... More
iv) 11 KV Outgoing Panel To Trafo Incomer 1,11 KV side ( 1 Run)
80
203868
2548.35
... More
Item No 5
Providing and laying dry trap metal soling 15 cm. to 20 cm. thick including hand packing with metal, rubble chips, application of required murum/stone dust blindage and compaction including watering etc. complete with all leads, including necessary heavy dewatering either mechanically or manually etc. complete.
For Plinth beam
75.75
93736
1237.45
... More
e) 200 mm dia.
32
30176
943
... More
ITEM No.4 Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties and taxes such as GST levied by GOI and GOM in all respect complete.Including inspection charges, transportation to stores / site, and stacking, etc. complete.
A) Sluice Valves P.N.-1.0 (Without by pass)
200mm dia D.I K9.pipe- (Inlet, )
1
18581
18581
... More
Subwork No 17 - Transformer & PCC Panel
Item No. 1: Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A 1/259)
For Lift 0 to 1.5 m
35.28
5556
157.5
... More
8. Pure Water Sump and Pump House
a) Capacity of sump One hour of designed flow.
b) Pump House
Pump house of required size over the sump or by the side.
9. Store House
Suitable for alum storage of three months and 7 days temporary storage, 7 days TCL requirement in mansoon with 20 % extra capacity for other sundry articles.
10. Vacuum feed type chlorinators - make to be
approved by MJP.
11. By pass arrangements - D.I. pipes.
i) By passing all units of T.P.
ii) By passing flash mixer, clariflocculator.
iii) By passing flash mixer, clariflocculator & filter
units
12. Disposal of waste from WTP : Safe disposal
arrangement to nearby nalla including cost of pipe
13.For WTP of capacity 30 mld and more additional arrangement for backwash water recycle shall be provided, including sump, pumping machinary, rising main etc. complete.
14. Drainage arrangements To decant all units of WTP with CI pipes upto boundary of each unit and further extension with RCC pipes to nearby nalla.
15.Electrical installation.
Both internal and external including entire plant
area.
-
-
-
... More
Item No 13
Providing Second class Burnt Brick masonry with conventional / IS type bricks in cement mortar 1:6 in superstructure, including bailing out water manually, striking joints on unexposed faces, racking out joints, scaffolding etc. complete.
61.97
501273
8088.97
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements