Tenders of West Central Railway in Madhya Pradesh

Set Of Ss Fasteners Consisting Of (1) Ss [set Of Ss Fasteners Consisting Of (1) Ss Hex Head Screw- M6x25 Mm As Per Is 1364- 92,pt2, (2) Ss Nylock Nut M6 Is 7002-1991 And (3) Ss Punched Washer A 6.6 As Per Is 2016-2021, Table-2 (one Set Item Consist Of 1 Nos Each)]

BOQ ITEMS: STEEL ALMIRAH, COMPUTER TABLE, OFFICE TABLE, 5 Seater Sofa With Fabric Cover, Office Chair Non Revolving, Revolving Chair, VISITOR CHAIR, CENTER TABLE

BOQ ITEMS: STEEL ALMIRAH, COMPUTER TABLE, OFFICE TABLE, 5 Seater Sofa With Fabric Cover, Office Chair Non Revolving, Revolving Chair, VISITOR CHAIR, CENTER TABLE

Supply, Installation, Testing & Commissioning Of Indoor And Outdoor Signalling Equipment, Power Supply Equipment And Associated Works In Conection With The Provision Of Electronic Interlocking At , Turki -bagahai Road -hinauta Phase -ii (3 Station) In Connection With The Doubling Of Sta- Rewa Section.

Acebrophylline 100 Mg +acetylcysteine 60

Scrap Condemn Nc4 Valve, Operating Insulated Copper Coil For C118, Operating Insulated Copper Coil For Emc, Operating Insulated Copper Coil For Nc4 Valve. Copper- 152.36 Kg, Brass-70.20 Kg, Aluminium- 31.20 Kg, Ferrous-93.60 Kg, Ins.-38.76 Kg Total - 386.12 Kg Approx. Sse Lot No. Et/trs/cs/scrap/condemn/valve & Coil/06/15 Dt. 18/12/2024 Note: 1.lot Should Be Sold On As Is Where Is Basis. 2.qty Of Lot Has Been Assessed On Approximate Basis Subject To Any +/- 10% Variation During Delivery By Actual Weighment If Any. 3.if Any Other Material Except Description Is Found While Delivery, Which Is Strictly Restricted & It Can Not Be Delivered. 4.delivery Of Lot By Actual Weighment. 5.it Is Strictly Advised To The Bidder To See The Lot And Loading Point Personally Before Bidding The Lot In E-auction, No Claim Will Be Entertained After Sale Of The Lot.

Scrap Condemn Ferrous Heavy Mixed Melting Consisting Of Bearing,cover, Locking Plate, Special Rig, Distance Piece Bearing, Middle Wheel Lock Plate, Thrower, Lock Plate, Loose Lip, Racer Distance Piece, Spring Seat Liner,a9, Sa9, C2 Relay Valve, C3w Valve, Air Drayer Valve, Ball Bearing,rollar,secondary Spiring For Wap, Tie Bar Assly C&d No.51, Hexagon Bolt With Hex Sl, Isolating 3 Way Cock, Set Of Key &handal For A, Set Of Machine Items For, Arc-chute Assaly For Em, Flexible Hose, Set Of Spring For Connect, Hex Head Screw M8 X 50mm, Lock Retraction Pin & Cha, Break Shoe Complete Nomin, Set Of Hardware For Prima, 3/4 Duplex Check Valve T, Sander Body Dummy Plug, Set Of Threaded Bolt For, Rotex Magnet Valve Type, Top Opereted Handle For C, 3/4" Check Valve, U Bolt, Screw Driver, Nut Driver, Tubing Cutter, Tap Set, Screw Extracter, Plier, Chisel, Marker Magnetic Stand, File, Taper Drill, Taper Shank Drill, Plane Shank Drill, Center Punch, Measuring Steel Tape, Divider, Set Of Outside And Inside Spring, Crimping Tool, Spanner, Grease Gun, Set Of Square Drive, Weld Deposit Set, Hammer, Crowbar, Torque Wrench, Gear To Half Box, Gas Cutting Blow Ripe, Reamer, Tap Set, Open, Ring, Hand Tap Set, Allen Key, Tubler, Blow Lamp, Pipe Wrench, Safty Helmet, Set Of Jaw, File Set, Micrometer, Sliding Bar, Set Of Plier And Cable Cutter, Token Set, Set Of Electronic Iron, Thickness Gauge, Gas Cylender Key, Steel Blade, Cutogen Nozzle, Drill One Set, Brazing Torch, Ratching, Stripper, Cable Tie Cutting Tool, Regulator, Gauge, Tester, Weighing Machine Parts, Dia Grinder, Drill Machine Parts, Hydrolic Pump, Jack, Tecometer, Elect. Fitting, Spring Seat Assembly, Old Panel Set, Equilizer Beam, Casted Bolster Frame Pieces, Axle Box Housing, Pinion, Portal Cut Lasing, Three Pully, Atd Ball Bearing, St,bt Pipe, Mcc Chanel, Da Box, 9 Ton Adjuster, Angle, Nut, Bolt, Tt Sleeve, Double Strap, Ss Wire Rope, Rt Push Arm, Anchor Fitting, Washer, Gaay Tube Pipe, Super Mast Cross, Feader Attachments, Button Plate, Gaay Rod Double Strap, V Bolt, Cls Panel, Facing Panel Upright, Boom, Strain Clamp, Double Eye Distance Rod, Barbid Wire, Snap Head Pin, Clamp, U Bolt, Balance Bet With Huck And Withot Huck, Turfer, Pull Lift, Chair With Arm, Chair Without Arm, Table, Dropout Fuse, Under Move Fitting, Oprating Handle,outer Rigger, Self Controlled, Hydrolic Pusher & Puller, Socket Set, Drawer Work Bench, Pentopen Strip, Main Spring, Tube, Upper Articulation Assly. Study Link, Pento Base Frame, Servo Motor, Hardware And Compresser Crankshaft, Head, Coupling, Disk Valve, Crossarm Channel, Brackets, Clamp, And Gi Wire, Lfd Frame Cover, Lfd Display Frame, Coach Guidance Shed, Battery Frame, Column Speaker, Single Line Display Board, Horn Speaker, Set Of Lybringth, End Frame, Holder Plate, Bello Plate, Speed Probe Housing Cover, Gear, Cut Piece Of Stator Frame Set Of Hardware, Wag-5 Loco Model Parts, Traction Motor Parts, Ball Bearing, Tm Stator Frame, 12 Hole Adjuster, Anticrip Wire, Clavis Snap Head Pin, Eot Crane, Hog Coupler Heater, Table, Propeller Shaft,board,ferrous Boxes, Almirah, Lockers, And Mics Item. Clamping Plate, Drivers Vaccum, Shaft Assly. Blade, End Shield, Horn Guide, Bolt M 48 Etc. Qty.- 135.565 Mts Approx. Sse Lot No. Et/trs/cs/scrap/condemn/ferrous/heavy Mixed Melt/06/13 Dt. 18/12/2024 Note: 1.lot Should Be Sold On As Is Where Is Basis. 2.qty Of Lot Has Been Assessed On Approximate Basis Subject To Any +/- 10% Variation During Delivery By Actual Weighment If Any. 3.if Any Other Material Except Description Is Found While Delivery, Which Is Strictly Restricted & It Can Not Be Delivered. 4.delivery Of Lot By Actual Weighment. 5.it Is Strictly Advised To The Bidder To See The Lot And Loading Point Personally Before Bidding The Lot In E-auction, No Claim Will Be Entertained After Sale Of The Lot.

Released Scrap/condemned Unusable Material 1)05 Kva At Make Sst 05 Nos Copper-15kg Per Nos, Ferrous-170kg Per Nos, 2)10 Kva At Make Andrew Yule 07 Nos Copper-25kg Per Nos, Ferrous-225kg Per Nos, 3)10 Kva At Make Sst 06 Nos Copper-25kg Per Nos, Ferrous-134kg Per Nos, 4)10 Kva At Make Sai Electrical 04 Nos Copper-25kg Per Nos, Ferrous-160kg Per Nos, 5)10 Kva At Make Ld Power 01 Nos Copper-25kg Per Nos, Ferrous-225kg Per Nos, 6)25 Kva At Make Sai Electrical 03 Nos Copper-50kg Per Nos, Ferrous-315kg Per Nos, 7)100 Kva At Make Industrical 01 Nos Copper-100kg Per Nos, Ferrous-500kg Per Nos, 8)25 Kva Pt-type 1 08 Nos(out Of 08 Nos Pt 03 Nos Pt Are Broken) Copper-10kg Per Nos, Ferrous-3 Nos X 40kg And 5 Nos X 90kg, 9)25 Kva Ct 03 Nos Copper-10kg Per Nos, Ferrous-100kg Per Nos, 10)sf-6 Bm Small 03 Nos Copper-02 Nos X 03kg, Aluminium- 02 Nos X 04kg, Ferrous-03 Nos X 170kg, 11) 25 Kv Vacuum Type Bm 03 Nos Copper-20kg Per Nos, Aluminium-02kg Per Nos, Ferrous-295kg Per Nos, 12)compressor 01 Nos. Ferrous-70kg Per Nos. Estimated Weight - Cu-951 Kg Approx, Al-86 Kg Approx, Fe-7874 Kg Approx Total Weight 8911 Kg And 45 Nos . Full Form At-auxiliary Transformer, Pt-potential Transformer, Ct-current Transformer, Bm-breaker Main. Sse Ss 11 No. Nsz Trd 05 2024 25 Note- 1. Lot Should Be Sold On As Is Where Is Basis. 2.delivery Given By Number Basis. 3.if Any Other Material Except Description Is Found While Delivery, Which Is Strictly Restricted. 4.buyer Should Visit Lot Before Bidding.

Scrap Condemn Aluminium Released From Hog Coupler, Foot Switch And Cover, Chock, Parts Of Damaged Panto, Top Mounting, Cylinder Support, Piston Of Cp, Fan, Coach Guidance Board(white Led) With Minor Ferrous Attachments, Parts Of Pneumatic Valve Cut Model, Parts Of Hand Blower, Parts Of Spm 2000, Elgi Greases Gun, Parts Of Wag-5 Loco Model, Crake And Damaged Impeller For Ocb, Parts Released From Mr/fp, Bp, Bc Pressure Gauge, Safety Valve, Throttle Valve, Nrv With Or Without Ferrous Attachments Etc. (aluminium- 1277.10 Kg, Ferrous-25 Kg) Total - 1302.10 Kg Approx. Sse Lot No. Et/trs/cs/scrap/condemn/aluminium Released From Loco Equipments/06/18 Dt. 18/12/2024 Note: 1.lot Should Be Sold On As Is Where Is Basis. 2.qty Of Lot Has Been Assessed On Approximate Basis Subject To Any +/- 10% Variation During Delivery By Actual Weighment If Any. 3.if Any Other Material Except Description Is Found While Delivery, Which Is Strictly Restricted & It Can Not Be Delivered. 4.delivery Of Lot By Actual Weighment. 5.it Is Strictly Advised To The Bidder To See The Lot And Loading Point Personally Before Bidding The Lot In E-auction, No Claim Will Be Entertained After Sale Of The Lot.

Scrap/condemn Brake Block Cast Iron. Gr Ii Off Sizes Released From Electric Locomotives. Total - 40 Mts Approx. Sse Lot No. Et/trs/cs/scrap/condemn/brake Block/ci/gr Ii/06/14 Dt. 18/12/2024 Note: 1.lot Should Be Sold On As Is Where Is Basis. 2.qty Of Lot Has Been Assessed On Approximate Basis Subject To Any +/- 10% Variation During Delivery By Actual Weighment If Any. 3.if Any Other Material Except Description Is Found While Delivery, Which Is Strictly Restricted & It Can Not Be Delivered. 4.delivery Of Lot By Actual Weighment. 5.it Is Strictly Advised To The Bidder To See The Lot And Loading Point Personally Before Bidding The Lot In E-auction, No Claim Will Be Entertained After Sale Of The Lot.