Urban Administration And Development Tender

... More
The Urban Administration And Development has issued a formal invitation for competitive bids for Road Safety Works At Different Places In Municipal Corporation Area in Satna, Madhya Pradesh, with an estimated contract value of Rs. 83,20,000. The bid opening date for this tender is 14-11-2026 and the last date for bid submission is 14-12-2026. Interested bidders for Urban Administration And Development tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Urban Administration And Development Tender - MP Tender

Opening Date14 Nov 2026
Closing Date14 Dec 2026
Tender Amount₹ 83,20,000 
Notes
Download

Costs

  • EMD

    ₹ 83,200
  • Document Cost

    ₹ 10,000
  • Tender Fee

    ₹ 982

Description

Road Safety Works At Different Places In Municipal Corporation Area

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
60 cm x 50 cm rectangular

1

4224

-

... More
90 cm circular

1

6233

-

... More
75 cm circular

1

5073

-

... More
60 cm circular

1

4122

-

... More
Providing and applying 2.5 mm including reflectorising glass beds 250 gm per Sqm a rea thick road markingstrips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T P, cleaning the road surface of all dirt, seals,oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and as per Section 803 of specifications.

1

438

-

... More
Providing and fixing of Category-A Bi-directional Twin-Moulded Shank Raised Pavement Markers/ Road Stud made of Plastic body moulded from ASA (Acrylic styrene Cryometries) or HIP (High impact polystyrene) or ABS material. Lens shall be of plastic material. The marker shall have compressive strength of 13635 kg tested accordance with ASTM D4280 and shall have Flexural Strength of 909 kgf. Reflective panels shall consist of number of lenses containing Single or dual prismatic cubes capable of providing total internal reflection of light entering the lens face. The Slope or the retro-reflecting surface shall be 35 +/- 5 degree to the base and area of Each retro reflecting surface shall not be less than 13 sqcm. When impacted in accordance with 9.4.1 of ASTM D4280, the face of the lens shall show no more than two radial cracks longer than 6.4 mm (0.25 in.). There shall be no radial cracks extending to the edge of the abrasion resistant area. There shall be no delamination. Height of the marker shall not exceed 20 mm and its width shall not exceed 130 mm. Moulded shank RPM shall have the shank strength of 600 kgf. Head of the stud shall be Smooth and shall not present any sharp edges to traffic. RPM shall be of Category A with optical performance (Coefficient of Luminous Intensity- CIL) shall not be less than that given in Table 800-13 of the specifications for Bi-directional stud. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin-based adhesive. The bidder shall submit a prequalification warranty for Two years. Test certificate from an as per ASTM D 4280, Coefficient of Luminance Intensity-CIL as per table 800-13 of the specifications. Material, Marker Height, Colour, Slope of Reflecting Surface (Lens), Lens Impact strength, Resistance to temperature cycling, andLongitudinal Flexural Strength to be submitted.

1

315

-

... More
Type - A, W : Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per Section 810 of specifications.

1

4647

-

... More
Direction and Place Identification Signs up to 0.9 Sqm Size Board (Type XI) Providing and erecting direction and place identification retro-reflectorized sign as per IRC:67 made of HighIntensity grade sheeting Section 801.3 of specifications, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area exceeding 0.9 Sqm fixed over back support frame of minimum 35 x 35 x 3 mm MS Angle mounted on two nos. of mild steel circular pipe 65 NB firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.

1

9211

-

... More
Direction and Place Identification Signs up to 0.9 Sqm Size Board (Type XI) Providing and erecting direction and place identification retro-reflectorized sign as per IRC:67 made of High Intensity grade sheeting Section 801.3 of specifications, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area exceeding 0.9 Sqm fixed over back support frame of min. 40 x 40 x 5 mm MS Angle mounted on two nos. of mild steel circular pipe 65 NB,3.2 mm thickness and 4.5 meter total height firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.

1

16335

-

... More
Median Marker Providing and Fixing of Median Marker that are made of tough, high impact resistant, injection-moulded, thermoplastic body with an isosceles trapezoidal structure of length, width and height not less than 15cm, 10cm and 10cm respectively and thickness not less than 1.8mm, the body structure shall be rounded at its acute angle, all the corners and edges. The plastic used for moulding the Median Marker shall have a minimum Notched Izod Impact strength value of 600 J/m at room temperature, when tested in accordance with ASTM D256 and shall retain at least 70% of this value when subjected to accelerated weathering for 1000hrs as per ASTM G155 or UL746C. The Median Marker shall have rectangular-shaped, fluorescent yellow colour retroreflective sheeting of size not less than 8.5cm 8.5cm and with fully reflective micro prismatic cube corners as its retro-reflective elements as per IRC:67 and ASTM D4956 type XI specifications reflectivity values. The retro-reflective sheeting shall be one or both sides of the Median Marker and shall be edge protected with no exposed edges which will prevent edge lifting, vandalism, sheeting damage, etc. The Median Marker shall be fixed by a combination of epoxy adhesive and grouting.

1

231

-

... More
Road Markers/ Road Studs with Lense Reflector: Providing and fixing of Category-A Bi-directional Twin-Moulded Shank Raised Pavement Markers/ Road Stud made of Plastic body moulded from ASA (Acrylic styrene Cryometries) or HIP (High impact polystyrene) or ABS material. Lens shall be of plastic material. The marker shall have compressive strength of 13635 kg tested accordance with ASTM D4280 and shall have Flexural Strength of 909 kgf. Reflective panels shall consist of number of lenses containing Single or dual prismatic cubes capable of providing total internal reflection of light entering the lens face. The Slope or the retro-reflecting surface shall be 35 +/- 5 degree to the base and area of Each retro reflecting surface shall not be less than 13 sqcm. When impacted in accordance with 9.4.1 of ASTM D4280, the face of the lens shall show no more than two radial cracks longer than 6.4 mm (0.25 in.). There shall be no radial cracks extending to the edge of the abrasion resistant area. There shall be no delamination. Height of the marker shall not exceed 20 mm and its width shall not exceed 130 mm. Moulded shank RPM shall have the shank strength of 600 kgf. Head of the stud shall be Smooth and shall not presentany sharp edges to traffic. RPM shall be of Category Awith optical performance (Coefficient of Luminous Intensity- CIL) shall not be less than that given in Table 800-13 of the specifications for Bi-directional stud. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin-based adhesive. The bidder shall submit a prequalification warranty for Two years. Test certificate from an as per ASTM D 4280, Coefficient of Luminance Intensity-CIL as per table 800-13 of the specifications. Material, Marker Height, Colour, Slope of Reflecting Surface (Lens), Lens Impact strength, Resistance to temperature cycling, and Longitudinal Flexural Strength to be submitted.

1

315

-

... More
Road DelineatorsSupplying and installation road delineators (road way indicators) as per Section 806 of the specifications. The structure shall be made in roll forming process having height of 800-900 mm above the ground level, width not less than 100 mm and shall extend not more than 200- 300 mm below the ground while being installed, buried or pressed in to the ground in confirmation with IRC:79, are as directed by the Engineer-in-Charge. The guide post with pure polyester powder coating with minimum 40 microns thickness for protection against corrosion, on top of which Type XI retro reflective sheeting confirming to IRC:67 and ASTMD-4956 shall be pasted on both sides complying to IRC:79. The delineator should consist of minimum retro reflective unit exposed area of 330 cm2 white colour, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC:67 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI label specification. The delineator shall have grooves across the- length to make the reflective sheets vandal-proof.

1

714

-

... More
Traffic Cone Red fluorescent with white reflective sleeve traffic cone made of low-density polyethylene (LDPE) material with a square base of 390 x 390 x 35 mm and a height of 770 mm, 4 kg in weight, as per specifications.

1

464

-

... More
Providing and Fixing of ABS Speed Braker of 100 ton Capacity Pasting with necessary etc

1

1400

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.