North Eastern Railway Tender
... More
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
North Eastern Railway - NER Tender
Civil And Construction
Construction Material
Ireps
Opening Date12 Feb 2025
Closing Date10 Mar 2025
Tender Amount₹ 1,26,14,55,163.62
Costs
EMD
₹ 64,57,300Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Complete Rob & Limited Height In Lieu Of Lc 4 (railway Portion Except Steel Girder + Approach Road In State Portion) At Km 60/23-25 In Indara Yard, Lc 67c (railway Portion Including Steel Girder + Approach Road In State Portion) At Km 95/273 Between Kkt-pou Section & Lc 115 (only Railway Portion Including Bow String Girder) At Km 433/723, Btt Yard In Varanasi Division Of N.e. Railway.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DYCEC1BSB-2025-01-CAO-C-NER-ENGG/NORTH EASTERN RLYTender No
DYCEC1BSB-2025-01Tender Authority
North Eastern Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Supplying and fixing ladders for bridges made M.S iron angle & bars as per approved drawing or as per direction of site engineer including welding and shop painting and grouting on piers etc.
9000
98
887400
... More
Performing load test of PSC girder as per IRC concrete code for the most unfavorable 6 condition including loading, unloading the span, arrangements of all instruments, observation of deflection and temperature etc, and submission of results to the engineer in charge as a complete job as per satisfaction.
5
213924
1069621.3
... More
Providing and laying RCC design mix controlled concrete gradeM-35/M-30/M-25 or any other design mix using cement, coarse sand and stone chips 20mm and down gauge graded in pile caps as per approved plan by RITES/IRCON/RDSO including all shuttering centering scaffolding, ascents, descents, leads, lifts below/above ground level uncoiling, straightening, cutting, hooking, bending, binding and placing all reinforcement and bond rods including cost of binding wires, design 7 mix with weigh batching, mechanical mixing and vibrating of concrete, curing for specified period, cutting soil strata bailing/pumping out water, if required, including all labour and material as a complete job as per IS specifications. The work is to be executed near the running line and to be done by providing temporary arrangements to ensure safety.(Cement and reinforcement steel shall be paid separately) (for ROB work). (Approved source of coarse agreegate is Dalla range, Rewa range & Kabarai range. Any modification in above source will be only after prior approval of Engineer-in- charge.).
4510
7234
32627910.7
... More
Providing and laying RCC of concrete grade M-25/M-30/M-35 or any other design mix in sub structure using cement, coarse sand and stone chips 20mm and down gauge graded in Columns, piers, pier cap, bed blocks, fins, stairs etc. above the level of pile cap as per approved plan by RITES/IRCON/RDSO for all heights and depths including cost of shuttering, centering, scaffolding, hooking, bending, binding and placing all reinforcement and bond rods including cost of binding wires 8 anti corrosive treatment, design mix with weigh bathing, mechanical mixing and vibrating of concrete, curing for specified period, rendering & finishing the exposed surface of concrete with corborandum stone, crossing of track, dewatering whenever required, including all labour and material as a complete job as per specifications. The work is to be executed near the running line and to be done by providing temporary arrangements to ensure safety. Note-The cement and reinforcement steel shall be arranged by the contractor at his own cost and will be paid separately (for ROB work). (Approved source of coarse agreegate is Dalla range, Rewa range & Kabarai range. Any modification in above source will be only after prior approval of Engineer-in-charge.).
2625
7825
20542567.5
... More
"Casting, Laying and placing in position RCC in deck slab, RCC Girder, anti - crash railing as per approved plan by RITES/IRCON/RDSO in design mix M - 30/ M-25 or any other design mix using 20mm and down gauge crushed stone graded course aggregate and course sand as per specification or as per direction of the Engineer in charge up to any height above ground level including all lead, lifts, shuttering, centering finishing, carrying out all other temporary arrangement for construction of deck slab including cutting, bending, binding, placing, reinforcement, binding wire, using mixture, vibrator for concrete, curing for specified period, including all labour and material as approved by the site Engineer has to be done by providing temporary arrangement to approved safety. The contractor has to submit and getting approval of temporary arrangement scheme including its design/drawing/plan from Railway authority. Note:- The entire job rate includes entire cost of temporary arrangement approval construction and removed under running traffic conditions. The contractor will be entirely responsible for all safety of workmen and Railway installation of site. (Cement & Steel will be paid separately). "" Note:- The rate includes cost of shuttering and centering etc. and as sacrificial shuttering will be used, hence cost of shuttering, centering etc. will be deducted on the basis of rate provided in USSOR/2012 after adding PVC escalation i.e. 35.26% Above from the rates of this item (for ROB work). (Approved source of coarse agreegate is Dalla range, Rewa range & Kabarai range. Any modification in above source will be only after prior approval of Engineer-in- charge.)."
-
-
9
... More
Cement concrete 1:3:6(1 Cement: 3 coarse sand: 6 coarse aggregate of 40mm and 10 below) nominal mix in foundation & flooring etc.using mechanical mixer and vibratory including curing of concrete for a specified period including all labour and material as a complete job. (Cement will be arranged by the contractor and will be paid separately under relevant NS/SOR items.
590
4188
2471256.3
... More
"Providing CC/RCC M-15 (1:2:4) with 20mm crushed stone, cement & coarse sand in foundation and flooring, sub-structure & super structure including bailing out of water and laying 11 concrete under water if required with contractor's own materials including cost of all centering, shuttering plants equipment, labour, vibrating Xing of track with all lead, lift etc. complete. (Cement & Reinforcement will be paid separately). (Approved source of coarse agreegate is Dalla range, Rewa range & Kabarai range. Any modification in above source will be only after prior approval of Engineer- in-charge.). "
60
5830
349805.4
... More
"Providing CC/RCC M-20/25 with 20mm crushed stone aggregate, coarse sand & cement in foundation, substructure & super structure such as in LHS approaches, return wall, wearing course and flooring, service road etc. including bailing out or pumping of water and laying concrete 12 under water if required, including supplying, fixing and removal of form work, with all cost including cost of labour, shuttering, moulds, T & P, plants, materials (excluding cement and steel) etc. complete with all lead, lift, ascend, descend, crossing of track, nallah, fencing, river etc. complete job. (Reinforcement and cement will be paid separately). (Approved source of coarse agreegate is Dalla range, Rewa range & Kabarai range. Any modification in above source will be only after prior approval of Engineer-in-charge.). "
2200
7174
15784076
... More
"Providing CC/RCC M-30/35 with 20mm crushed stone aggregate, coarse sand & cement in bed block, ballast retainer, RCC boxes etc. including supplying, fixing and removal of form work, with all cost including bailing out or pumping of water and laying concrete under water if 13 required, including cost of labour, shuttering, moulds, T & P, plants, materials (excluding cement and steel) etc. complete with all lead, lift, ascend, descend, crossing of track, nallah, fencing, river etc. complete job (Reinforcement and cement will be paid separately). (Approved source of coarse agreegate is Dalla range, Rewa range & Kabarai range. Any modification in above source will be only after prior approval of Engineer-in-charge.). "
1775
7909
14039273.75
... More
"Construction of RCC bored cast in situ piles 1.20 metre dia below the pile cap in all class of soil under sub soil water(if met) and in all types of soil as per approved plan by RITES/IRCON/RDSO including all operations, plants, machinery for making bored piles including the use of casing pipes if necessary using design mixed concrete of grade M-25/M-30 or any other design mix as per IS:2911, Part-I, Sec.2 & 3, using cement, coarse sand and stone chips 20 mm and down gauge including all ascents, descents, leads, lifts above/below ground level uncoiling, straightening, cutting, hooking, bending, binding and placing in position all the reinforcement including cost of binding wires, mechanical mixing and vibrating of concrete, curing for specified period, all labour & material as a complete job as per specifications including bailing/ pumping out of water and use of bentonite as and when required. (Cement & Steel will be paid separately) (i)The rate shall include temp. arrangement required to fulfill safety requirements. The work is to be executed in running traffic condition near track. The rate shall include temp. Arrangement required fulfilling safety requirements.(ii) The continuity and integrity of the newly constructed piles will have to be checked by contractor free of cost (i) For depth 0-15M. (Approved source of coarse agreegate is Dalla range, Rewa range & Kabarai range. Any modification in above source will be only after prior approval of Engineer-in-charge.). "
6025
15770
95020214.75
... More
"Construction of RCC bored cast in situ piles 1.20 metre dia below the pile cap in all class of soil under sub soil water(if met) and in all types of soil as per approved plan by RITES/IRCON/RDSO including all operations, plants, machinery for making bored piles including the use of casing pipes if necessary using design mixed concrete of grade M-25/M-30 or any other design mix as per IS:2911, Part-I, Sec.2 & 3, using cement, coarse sand and stone chips 20 mm and down gauge including all ascents, descents, leads, lifts above/below ground level uncoiling, straightening, cutting, hooking, bending, binding and placing in position all the reinforcement including cost of binding wires, 15 mechanical mixing and vibrating of concrete, curing for specified period, all labour & material as a complete job as per specifications including bailing/ pumping out of water and use of bentonite as and when required. (Cement & Steel will be paid separately) (i)The rate shall include temp. arrangement required to fulfill safety requirements. The work is to be executed in running traffic condition near track. The rate shall include temp. Arrangement required fulfilling safety requirements.(ii) The continuity and integrity of the newly constructed piles will have to be checked by contractor free of cost. (ii) Depth more than 15m upto founding level. (Approved source of coarse agreegate is Dalla range, Rewa range & Kabarai range. Any modification in above source will be only after prior approval of Engineer-in-charge.). "
3180
15770
50151748.2
... More
Carrying out initial load test on 1.00 metre/1.20 metre dia cast in situ bored pile 16 conforming to IS:2911, Pt.IV upto failure. This rate includes all labour and material for loading, unloading and transportation, fixing instrument, observations etc. and submission of results in three(03) copies to the Engineer in charges as a complete job to the satisfaction of Engineer in charge. Test piles and anchor piles will be paid separately under relevant item. (i) Vertical load test.
5
357309
1786549.95
... More
Carrying out initial load test on 1.00 metre/1.20 metre dia cast in situ bored pile 17 conforming to IS:2911, Pt.IV upto failure. This rate includes all labour and material for loading, unloading and transportation, fixing instrument, observations etc. and submission of results in three(03) copies to the Engineer in charges as a complete job to the satisfaction of Engineer in charge. Test piles and anchor piles will be paid separately under relevant item. (ii) Horizontal load test.
5
127043
635217.8
... More
Carrying out routine load test as per specification and approved drawing by 18 RITES/IRCON/RDSO or as decided by Engineer in charge including all arrangements, instrumentation transportation and kent ledges for the load test etc. (a) Vertical load test upto to at least 1.5times the carrying capacity as decided/directed by engineer in charge at site.
7
79402
555815.54
... More
Carrying out routine load test as per specification and approved drawing by RITES/IRCON/RDSO or as decided by Engineer in charge including all arrangements, instrumentation transportation and kent ledges for the load test etc. (b) Horizontal load test.
7
23820
166744.62
... More
Conducting Cross Hole Ultrasonic Monitoring (CHUM/ Cross Hole Logging (CSL) test of 20 piles with contractor's man and machine. The rate includes cost of inspection of site and other unforeseen cost required for test, submission of reports in triplicate as per the satisfaction of the Engineer in charge at site. Payment of required M.S. steel reinforcement for fixing in position of M.S. pipe, MS plate etc. will be paid separately under relevant NS/ USSOR items
80
17261
1380892
... More
Dismantling CC/RCC/Brick work in lime or Cement mortar & Stone Slab in foundations, superstructure with all labour & materials including disposal of surplus materials with all lead, lift, descend, crossing of track, nallah, river complete as directed by the Engineer in charge. (a) Brick work.
-
-
21
... More
Dismantling CC/RCC/Brick work in lime or Cement mortar & Stone Slab in foundations, 22 superstructure with all labour & materials including disposal of surplus materials with all lead, lift, descend, crossing of track, nallah, river complete as directed by the Engineer in charge. (b) Lime/Cement Concrete.
150
587
88168.5
... More
Dismantling CC/RCC/Brick work in lime or Cement mortar & Stone Slab in foundations, superstructure with all labour & materials including disposal of surplus materials with all lead, lift, descend, crossing of track, nallah, river complete as directed by the Engineer in charge. (c) RCC.
225
755
170043.75
... More
Providing working drawing on Auto-CAD and details of foundation, RCC sub-structure. composite/PSC Girder, RCC deck slab along with bearing and design of supporting structure across the 24 proposed track for the complete ROB including approaches and railway portion of ROB in lieu of LCs. The work shall include seismic analysis of each element of structure along with submission of detailed design calculations Design & drawing shall be submitted in hard copy there sets as well as in soft copy and duly proof checked by IIT.
3
900202
2700607.89
... More
Construction of granular sub base by providing coarse graded material (crushed stone 25 with local sand) spreading in uniform layers with mutor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause no. 401 of MORTH specifiation.
4390
2764
12136550.1
... More
Providing laying spreading and compacting graded crushed stone aggregate to Wet Mix 26 Macadam specification including premixing the Material with water at OMC in wet-mix- plant, tanlage of mixed Material by tipper to site, laying in uniform layers with paver in sub base/ base course on well prepared surface and compacting with vibratory smooth wheeled rollers to achieve the desired density as per MORTH specification no. 406
3470
3961
13745329.3
... More
Providing and applying tack coat (before BM and SDBC work) with bitumen 27 emulsion(MS) using emulsion pressure distributor at the rate of 0.204 ke per sqm on the prepared bituminous/granular surface cleaned with mechanical broom and air compressor. As per MORTH specification no. 503.
14600
12
180748
... More
Providing and laying Bituminous macadum Grade-11 75 mm thick with 100-120 TPH hot mix plant producing an average out put 75 tonnes per hour using crushed aggregate( Dalla quarry) of 28 specified grading premixed with bituminous binder with Bitumen 60/70 grade. transported at site, laid over a previously prepared surface with paver finisher to the required grade. level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction. asd per MORTH specification 504
870
10398
9046373.1
... More
Providing and laying Semi Dense Bituminous concrete Grade-11.25 mm thick with 100- 120 TPH batch type HMP producing an average output of 75 tonnes per hour using approved crushed 29 aggregate (Dalla quarry) of specified grading premixed with bituminous binder(CRMB-55 grade) @ 5.00 percent of mix and filler, transporting the hot mix to work site, laying with a hydrstatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheel, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause no. 508 complete in all respect.
420
13203
5545671.6
... More
Providing and laying asphaltic wearing coat on RCC deck slab as per approved drawing and MORTH specifications including all labour and material as a complete job.
610
15492
9450327.4
... More
"Supplying & filling of granular backfill materials behind wings, abutment and return walls in layers not exceding 300mm thickness and its consolidation complete with all lead, lifts, 31 descends/ascends, crossing of track, river, nalah and channels etc. with contractor's labours and materials and tools & plants. The back fill materials shall consist of GW,GP and SW group as per approved plan and direction of Engineer in charges. Specification should be as per IRC SP : 102 - 2014. "
6010
1115
6703794.4
... More
"Supplying, filling and pitching of stone boulders hand packed and surface leveled off to correct profile in thickness not less than 600mm as approved by Engineer in charge behind abutment, 32 wings, return walls and pitching out side the floors and on bridge approches and bank/sub bank complete as per approved plan and as directed by Engineer in charge including all royalty and taxes over boulder with all lead, lift, descend and xing of river, channels, track and fencing complete with contractor's labours and materials and tools & plants. "
481
2759
1327305.07
... More
Providing and fixing reinforced each retaining wall for approach ramps with M-35 grade precast reinforced concrete plain finish panels in cruciform shape including cost of all panes joints 33 temporary formwork scaffolding all lifts and leads, labaorus plant hire, material storage and handling expenses reinforcing strips. transport to site all fixtures drainage arrangement design drawing ng supervision, taxes, etc. required for the proper completion of work as per clause 3100 of MORTH specification 2001.
2770
11087
30712735.1
... More
"Providing and fixing 65mm dia NB GI pipe B class with 25mm thick base plate. 12mm thick MS plate 1.00in centre to centre and 16mm dia U bolts as per approved drawing. The rate includes all labour and material as complete job and also includes one cont priming and two coats of 34 painting of approved brand and quality. Providing and fixing 65mm nominal dia B class G1 pipe in three parallel rows for foot path railing as per approved drawing including the cost of MS angle and channels in vertical post ncluding the cost of welding one coat of priming & two coats of painting of approved brand at all heights with all labour and material 25 3 complete job. Executing the work in safe manner in running Railway traffic condition "
2670
1824
4871788.8
... More
Providing and fixing 100mm dia Drainage spout with grating complete as per approved drawing and technical specification including all bends and other fittings as a complete job. Executing the work in safe manner in running Railway traffic condition.
404
878
354833.2
... More
Providing and fixing 150mm nominal dia B class G.I. rain water pipe including the cost of all fittings, welding, clamps and fixing with anhor in concrete etc. at all height with all lab our and material as a complete job. Executing the work in safe manner running traffic condition.
2300
1532
3525302
... More
Design, manufacturing, supplying and fixing in position of the single strip seal 37 expansion joints with movements upto 70mm as per MORTH circular No.RW/NH-43059/1/96-S&R dt.17- 7-97 & 31-3-97 duly supplemented by manufactures specifications. The strip seal expansion joints shall be got designed & manufacture firm approved by the MORTH and approval of the design/drawings by the railways. The rate includes all labour & material as a complete job.
442
14522
6418865.44
... More
Supplying and finishing RCC work with cement paint i.e. snowcem etc. three coats for all height and position including all labour and material as a complete job.
36950
98
3621469.5
... More
"Providing barricading with the help of fencing along the running track where the work is to be done in close vicinity of the track. The fencing shall be minimum 1.5m high with MS angle posts 1.8m height of size 50x50x6mm provided with hooks etc. placed every 2.0m apart, embedded in cement concrete (1:2:4) blocks of size 0.23 x 0.23 x 0.23m and every 15th post (or nearer, if there is abrupt change of ground slope), last but one end post and corner post shall be strutted on both sides and end post one side only and struts embedded in cement concrete (1:2:4) block of size 0.23x0.23x0.23 m, provided with 5 horizontal lines and two diagonals of G.I. barbed wire 9.38 kg/100m (min) between the two posts fitted and fixed with G.I. staples driven into the posts including 2 bands (red and white) 300 mm long shall be painted with water bound paints on the ballies from top and two bands (100 mm apart) of yellow aluminous top of width 50 mm shall be pasted on top white band. The rate includes cost of all materials including cement. After execution of all works requiring safety fencing in particular stretch, the fencing shall be removed with the approval of the Engineer-in-charge and formation shall be repaired to its profile and released materials will be contractor's property. NOTE-(a)-The work under this item shall be completed as per direction of site-in-charge in a time bound manner. (b)-85% payment shall be paid after execution of works and balance 15% of this item shall be released after maintaining it successfully vide item 2 and removing the barricading after the instruction of Engineer-in-charge. "
-
-
39
... More
"Maintaining including watch & ward and repairs of the barricading provided as per item no. 38 including cost of all contractor's men, materials, tools and plants required in this regard. Note: 1. The payment will be made for the length maintained during the month at the rate mentioned here 40 till the barricading is required to be maintained at site as per directions of the Engineer. However, a deduction of double the rate mentioned here shall be made for a km, if any length of barricading is found to be missing/damaged/in-effective in that km, before the Engineer has directed for its removal. 2. The work under this item shall be executed only after completion of work in particular block section as directed by site-in-charge. "
14200
4
68870
... More
"Supplying, making & providing high yield strength deformed bars as per IS 1786 or TMT Fe500 including all cutting, bending, threading, hooking, tack welding, fixing in position in all 41 components of the bridge/building structure with contractor's own materials, labour & all necessary plants & equipment with all leads, lifts, descents etc. complete in all respect as per drawing, specification & as directed by the Engineer. including cost of steel of requisite size and binding wire (not less than 1mm (18SWG) as per IS 280-1978). (Bars manufactured in integrated steel plants only by "SAIL, TISCO, RINL etc. as approved by site Engineer shall be used by contractor for this item). "
2995
90480
270989786.35
... More
Supplying of P.P.C of grade as required by Engineer in charge at site confirming to IS 42 1489 manufactured by reputed firm such as ACC, Jaypee, L&T and Birla etc. as approved by Engineer in charge. The rate shall be inclusive of all taxes testing leads, lifts, loading, unloading of cement to IOW's godown/site godown.
375
9298
3486750
... More
Supplying of Ordinary Portland Cement 43 grade manufactured by reputed firms such 43 as Birla, L&T, ACC, JAYPEE and GUJRAT AMBUJA etc. as per specification and confirming to IS:8112- 89.The rate shall be inclusive of all taxes testing leads, lifts, loading, unloading of cement to IOW's godown/site godown.
12140
10096
122569082
... More
Supply of steel sections of superior quality or required sizes confirming to IS 2062 for sacrificial shuttering for ROB including supplying of 6 mm thin MS plate, ISA 75x75x10 ISMC 100, ISMC 150 & other components.
180
89582
16124830.2
... More
Fabricating per IRS code and errecting various components of sacrificial shuttering including welding revetting, volting, nutting one shop coat of paint complete as directed by engineer in charge with all labour, tools & plant, lead & lift, (fabrication share be accordence with IS specification No. B361- Part-2).
-
-
45
... More
Fabricating, supplying and errection of fabricated height gauge by standard rolled steel 46 section as per approved drawing including all contractor's labour, T&P, transportation observing safety precautions with one coat of metal primer & two coat of enamel paint of approved quality in alternate white and black strip in 300 mm above ground level etc. complete job
270
13139
3547543.5
... More
Providing, fabricating and laying of colour coated Gavalume (Profles system roofing) material for self-supported roofing system. (Technology similar to "Proflex system", provided by M & B Engineering PVT. Limited Ahmdabad) material for self supported roofing system (Technology similar to "Proflex system" Provided by M & B Engineering PVT Ltd Ahmedabad). The materials shall be of following specification:- BMT : 0.90mm, APT : 0.95 mm, tolerance +/- 2mm) Railway (tolerance +/- 2mm), including supplying, loading, Transporting, unloading and stacking at site, fabricating and laying with all contractor's tools, plants, machineries, materials fixtures, labour including all lead & lift and laps/wastage if any etc. complete. The colour of sheet will be decided by Rlys. The rate is also providing execution drawing. Fabrication and Installation of self supported roofing Technology similar 47 to "Proflex System" provided by M&B Engineering Pvt. Ltd., Ahmedabad as under or decided by Engineer-in-charge. (a) Span 14.5 mtrs or as per site requirement. (b) Arch rise : 3 Mtrs or as per site requirement. (c) Length : 18.00 mtrs or as per site requirement. (d) Arch Length : 16.00 mtrs or as per site requirement. Note :- The roofing system should self supporting roofing system (i.e. Without trusses, purlines or any ancillary supports) shall be designed by the contractor through the consultant anf got duly proof checked from Indian Institute of technology, Banaras Hindu University - Varanasi . Design & Drawing will be approved by Railways . For design of roofing system relvent load parameter of IS code of practice to be adopted. The cost of designing and proof checking of design & drawing will not be paid separately and these charges are deemed to be included in rates of this item . The rate shall also inclusive of preparation of necessary. AUTO CAD drawing required for excavation of roofing system. The details of arch, tentative and may change as per the design with approval of Rly. The roofing system should be 100% leak proof, resistant to corrosion and maintenance free.
6000
3646
21878220
... More
Supply of unskilled labour for assisting in monitoring of quality control, track safety, act as look out man for officials and staff working in running line, assisting in giving progress to maintainer, deployment of traffic volunteers at ROB for traffic diversion. etc.
9960
578
5762856
... More
Supply of skilled labour for keeping watch on going works and maintaining progress, assisting in taking and calculating levels, ranging, surveying , toe marking of earth fill etc.
3720
812
3023988
... More
Earthwork in excavation in foundation upto required level in all categories of soil and ground water conditions including hard soil which can be removed by pick and crow bars in all conditions inclusive of all leads, lifts, ascends, descends, crossing of nallah and track or other 50 obstructions, leveling dressing and disposing of the excavated earth to approach bank or and other nearby sites, including rehandling earth in foundation, including watering ramming earth in 15cm layers and disposing surplus earth out side railway land if required as per directions of Engineer in charge. The rates include dismantling the brick work, road metalling, water bound macadam if encountered including all labour and material as a complete job.
22600
122
2763528
... More
Filling back already excavated earth, ramming in 30cm thick layers etc complete in foundation
5888.65
76
448362
... More
"Earthwork in filling in embankment, guide bunds, around buried type abutments, bridge gaps, trolley refuges, rain bunds if provided, platforms etc. with earth excavated from outside railway boundary entirely arranged by the contractor at his own cost as per RDSO's latest guidelines and specifications and special condition of contract including all ends, royalty, lifts, ascents, descents, crossing of nallahs or any other obstructions. The rates shall include all dressing of bank to final profile, demarcation and setting out of profile, site clearance, removing of shrubs, roots of vegetations growth, heavy grass, benching of existing slope of old bank, all dling/ re-handling. taxes, octroi and royalty etc. as a complete job. Cut trees shall be property of railways and to be deposited in the railway godown unless specified otherwise in the Special conditions of contract. "
7200
202
1460016
... More
"Extra for mechanical compaction of earth/blanketing material filled in embankment 53 with contractor's rollers of suitable capacity, type and size to achieve specified density as per specification, testing as per IS codes incl. cost of water, T&P consumable material and all labour as a complete job. The work is to be executed as per Latest edition of ""Guidelines for Earthwork in Railway Projects"" issued by RDSO, Lucknow. "
7200
28
203688
... More
"Manufacturing, supplying & stacking of machine crushed stone track ballast from 54 private quarries confirming to RDSO's specification of June-2016 with upto date correction slips for work at LCs including carriage with all lead & lift , ascend, descend, crossing of the track, nallah etc. re handling if any and stacking as per instruction of Railway's representative with contractor's labour, tools and plants etc. complete as directed by engineer in charge. (a) Basic cost of ballast. "
1400
1105
1547112
... More
"Manufacturing, supplying & stacking of machine crushed stone track ballast from private quarries confirming to RDSO's specification of June-2016 with upto date correction slips for 55 work at LCs including carriage with all lead & lift , ascend, descend, crossing of the track, nallah etc. re handling if any and stacking as per instruction of Railway's representative with contractor's labour, tools and plants etc. complete as directed by engineer in charge. (b) All other elements including transportation(b) All other elements including transportation and GST. "
1400
2624
3674902
... More
"Spreading ballast form stacks (available along the bank) uniformly on new formation/track including all lead, lift, crossing of track as per direction of Engineer at site. (i) Stack available on new bank "
1400
70
98910
... More
Cutting of 60Kg./52 kg/90R 90/72 UTS rail with hexa-blade/rail cutting machine in station yard/block section complete as per track manual and direction of Engineer-In charge. Note:- No payment shall be made for incorrect cuts.
176
79
13988.48
... More
Drilling 32mm/28mm/25mm dia fish bolt holes and chamfering in 60kg/52kg/90R rail in station yard/block section complete as per track manual and direction of Engineer in charge. Note:-No payment shall be made for incorrectly made holes.
304
42
13053.76
... More
"First round of through packing of PSC/CST-9 sleeper track as per IRPWM to correct level and alignment as per direction of Engineer at site. Note:- 10% of payment will be with held till the cleaning of cess is completed. (a) PSC sleeper track 1660 Nos. per km/M+7/M+4"
-
-
61
... More
Fabricating, supplying and fixing in position galvanized steel channel sleepers of mild 63 steel of tested quality confirming to IS : 2062, on fabricated girders including all fixtures, fastenings as per approved Railway drawings with labour, materials, tools & Plants etc. as a complete job including galvanizing of all components.
56
95153
5328603.28
... More
Supply and transportation of elestromeric pad, elestromeric neoprene and groved 64 rubber pads as per Drg. No. RDSO/B-153C/R-2, B-1636/2 & B1636/1/R-2 and RDSO/T-5156 to 5504 & RDSO/T-5197 to 5200 and specification given therin of approved quality with contractor's tools, plants, labour, taxes, levies etc. complete.
1020
5921
6039991.2
... More
"Launching of Railways releaving girder of overall length upto 12 to 22 m after removing track ballast, excavation earth on properly prepared wooden/CC Cribs supports as per the approved scheme of launching, railway drawing and specifications by contractor's road crane including 65 all toos, plans, machineries, labour, equipments etc. The work includes fixing of track i.e. steel channel sleeper, rails and fixing as per railwa's specifications and standards on the releaving girder and necessary adjusments in the longitudinal x-levels including lifting and packing of approaches of girders after insertion of releaving girders in track to amintain sefety of cranes on the releaving girders and its approaches. Note:- Rails will be provided by railway. "
340
7472
2540735
... More
"De-launching of Railways 12 to 22m long releaving girder from bridges and stacking at 66 suitable location as per direction of Engineer in charge with contractor's labour, trailor, cranes, derricks, tools & plants, equipments cunsmable etc. complete as per specification, special condition and detailed scope of work furnished in the tender and as directed by the engineer in charge. Note: The rate shall be inclusive of dismantling of track fixed on girder."
340
3739
1271396
... More
"Pushing of pre cast RCC segment of external diemensions (3.50x5.65 Mtr.) through air 67 pressure method under neath of already placed service girder between both side machinery wall and over base concrete including proper placement adjustment gap filling with cement mortar and pravell complete of site incharge. Note:- If the size of box changes as per site requirement then payment will be made on prorata basis. "
130
25513
3316765.4
... More
"Supply & fabrication of steel RH girder spans as per the approved drawing with all welds, rivets, nuts & bolt etc. with contractor's own material, fabrication, machinery, templates, fixtures equipment, tools & plants, transportation assembling at site skilled/unskilled labour, excise 68 duty, Octroi sles taxes and other taxes, all testing charges, all lead and lift, descent, loading, unloading, crossing one or more Railway track, if required etc. complete and as per technical specifications. The rate is inclusive of transportation of fabricated girder parts to site by contractor's own means at his cost. (Note: The fabrication of girders must be got done from RDSO approve firms for Steel Bridge Girder only.) "
210
75978
15955449.3
... More
"Metalizing girder/girder component such as cross girder, top chord channels, bracing etc. of BG new steel girder as directed by Engineer with aluminum spray not less than two layers after preparing surface by sand/grit blasting as per provision laid in appendix VI of IRS B-1179 code (latest 69 correction) including one coat wash primer (IS-5666) One coat zinc chrome primer (IS-104) and two coat of aluminum paint (IS-2339) with approved paint conforming to IS specification for fabrication & erection of steel girder bridge ( RS B 1-79) as corrected up to date with contractor's own materials, tools plants, labour, loading/unloading, transportation, handling, re-handling if any including all lead, lifts descents, crossing of track/obstruction etc complete in all respect and as per direction of the engineer. "
900
563
507204
... More
"Supplying & driving the cold twisted MS sheet piles generally 10 mm and 10 meter 70 deep below formation level having interlocking design and taken out the same after launching with all necessary vibro hammers and other T&P required as a complete job. It includes all necessary labour and material, cost of all T&P, all leading, loading, transportation of the same with all toll taxes (To and Fro), GST and other applicable taxes as per extent rules, all ascent, descent, crossing of track, cost of all fuels and lubricants, the necessary arrangement of lighting, camping at site etc. "
90000
108
9809100
... More
Rebate for the sheet piles taken out after completionn of megablock and construction of necessary protection walls/box with all necessary Vibro hammers and other T&P. (Sheet piles materials will be given back to Contractor)
90
-
-1778779.8
... More
"Providing and laying blanketing materials of specifications as per RDSO guidelines for design /Construction of formation on Indian Railway track issued vide letter no. RS/G/108/Heavy Axle Load dated 26.10.2016, using well graded granular material having Cu>7, Cc between 1 and 3, fines (passing 75 microns) between 3% to 10%, minimum Soaked CBR value of 25 and compacted at 100% of MDD in layers of maximum 30 cm thickness in loose state using graders and compaction using vibratory compactors, top and side dressing to provide final formation as per designed profile. The rate shall not include compaction, which shall be paid separately. NOTE: 1) If naturally available materials do not meet the laid down specifications, the blanket material has to be produced by mechanical process using mechanical crushing or mechanical blending method or combination of these two 72 methods as given in the Appendix-C of RDSO Guidelines and Specifications for Design of Formation for Heavy Axle Load -2009. The rate for this item is inclusive of the production of material by mechanical process as per above mentioned RDSO guidelines and in case such mechanical process is not required to be used in providing and laying of blanketing material due to availability of natural blanketing material conforming to laid down specifications, the rate of this item shall be reduced by Rs. 250/- per cum. 2) The filter criteria and minimum EV2 Criteria as mentioned in the guidelines of 2009 is not applicable. 3) The rate shall include cost of all field and laboratory tests except CBR tests which will be paid vide separate BOQ item. 4) The Latest guidelines for Design / Construction of formation on Indian Railway track, issued vide RDSO lr. No. RS/G/108/Heavy axle load dated 26.10.2016 shall be adopted for this item. The basic instructions (other than those contained in the latest guidelines dated 26.10.2016) detailed in GE: G-1 of 2003 and GE:0014 of 2009 shall continue to apply. " 73
615
3139
1930774.05
... More
"Conducting test for determination of California Bearing Ratio as per IS: 2720 "
2
3029
6058.26
... More
Supply, fitting and fixing lifting barrier (RDSO type/M-gate) with necessary winch pedestal, boom locking arrangement lock with key, foundation of rod run, pedestal cranks, rod run, top/bottom roller, 1/2/3 way horizontal /vertical wheel, flexible wire of specified gauge with base with 74 all fittings including supply of fixed type lamps with all accessories and fittings complete as required at site and as per instruction of site engineer or his representative. Supplying and fixing barrier with accessories should be as per railway standard specification and installation and commissioning should be completed in all respect including providing "retro reflective sheet" on lifting barriers and painting of winch, liver etc. as specified by site engineer. rate includes all labour, material, transportation etc. and to be done as per instruction of engineer site.
3
459929
1379788.2
... More
Hiring of Pickup van/tata Mobile etc. On daily basis (1 pickup vam/Tata Mobile for two years) Note: Day means "Per pickup vam/Tata Mobile per day". 76
1810
1228
2223186.8
... More
Additional charge per Km. for running of Pick up Van/Tata Mobile.
108360
9
999079.2
... More
Fabrication, transportation, supply and stacking at bridge site of welded type Bow 77 string girder of 60.00 m clear span as per RDSO's Drg No. B/10414 series(with latest alterations) including POT PTFE bearings with latest alteration/edition/ specifications , loading as per specifications and approved drawings and supply of Turn bolts/HSFG bolts, nuts, washers, required to assemble the girders with contractor's own steel labour, tools, plants, temporary arrangements and all consumable stores required for the work, transporting the girder to site , unloading and stacking the girders at the ROB /bridge site.
1500
109713
164569680
... More
Erection and Launching of Bow string Steel Girder of 60m (clear Span) in Railway span or any other span by any method which is to be approved by Commissioner of Railway Safety or Engineer-in-charge & placing in position true to line and level including pulling ,pushing ,lateral shifting ,loading, unloading complete in all respect as per drawing and Specification, observing all safety measures, obtaining road traffic block with appropriate authority providing suitable diversion if required etc, complete job. Erection works includes preparation and approval of erection/assembly/ 79 launching scheme. Rate shall include the cost of all labours, leads, lifts, ascents descents, crossing of traffic road and submission of suitable erection/assembly/ launching scheme by contractor with proof check by IIT/Govt. Engg college. .The job of erection includes erection and fixing of bearings in correct position .The item also includes lowering and placing of girder on bearings and its centering /aligning. The rate shall also be inclusive of dismantling of staging, scaffolding, other temporary arrangement required for assembly and cold straightening of deformed and bent girders parts before the assembly with contractor's labours etc. Erection work includes preparation and submission of suitable erection/ assembly /launching scheme by contractor with detail calculation by reputed agency which will be by finally ,approved by Railway.
1500
23287
34930725
... More
METALLIZING: Surface preparation as per procedure laid in clause 3 of IS: 6586 to get surface of quality as per appendix-A of IS: 5905 and spraying 150 micron thick layer of Aluminium as per IS:2590 by process of metalizing of all fabricated components under item no.1 of Schedule except 80 top surface of I-Section and sear connectors as per IRS specification after metalizing following layer of painting is to be done.Only for Bow string girder. NOTES: (i) One coat of wash primer as per IS:5666(ii) One coat of zinc chromate primer as per IS:104(4-6 hr. after wash primer), zinc chromate should confirm to type 2 of IS:51(iii) One coat of Aluminium paint as per IS: 2339 (By brush or spraying after hard drying of zinc chromate primer).
1500
923
1384650
... More
Painting of Steel Bridge Girders with cleaning of surfaces, with one finish coat of paint 81 Aluminium confirming to IS:2339 of approved quality after touching up the primer coat where ever surface damaged with one coat of Ready mixed paint Zinc chromate priming to IS:104 followed by one coat of Ready Mixed Paint Red Oxide Zinc Chrome priming paint to IS:2074 with contractors own paints, material ,tools, plants, consumables, scaffolding etc.
1500
1053
1579860
... More
FLOORING // Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with local sand, with common burnt clay non modular bricks.
1350
733
989955
... More
ROAD WORK // ROADS // Supplying and stacking at site. // 90 mm to 45 mm size stone aggregate
60
1937
116256
... More
ROAD WORK // ROADS // Supplying and stacking at site. // 63 mm to 45 mm size stone aggregate
60
1624
97470
... More
ROAD WORK // ROADS // Supplying and stacking at site. // 53 mm to 22.4 mm size stone aggregate
60
1837
110235
... More
STEEL WORK // Steel work in built up tubular (round, square or rectangular hollow 5 tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. // Hot finished welded type tubes
55800
154
8643420
... More
STEEL WORK // Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. // In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
6600
142
939180
... More
ROOFING // SHEET ROOFING // Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. // 0.80 mm thick with zinc coating not less than 275 gm/sqm 8
480
822
394632
... More
STEEL WORK // Providing and fixing bolts including nuts and washers complete.
4500
140
630675
... More
DRAINAGE // Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size 9 (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: // Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : // 450 mm dia. R.C.C. pipe
60
1481
88893
... More
DRAINAGE // Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size 10 (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: // Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : // 600 mm dia. R.C.C. pipe
30
2098
62943
... More
FINISHING // Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
4800
123
594480
... More
RAIN WATER HARVESTING & TUBEWELLS // Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting 12 samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. // All types of soil // 300 mm dia
120
592
71046
... More
RAIN WATER HARVESTING & TUBEWELLS // Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running 13 charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. // Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. // 150 mm nominal size dia
150
668
100275
... More
RAIN WATER HARVESTING & TUBEWELLS // Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting 14 samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. // Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: // 150 mm dia
6
210
1264.5
... More
ROOFING // SHEET ROOFING // Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with 15 bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. // 1.00 mm thick with zinc coating not less than 275 gm/sqm
3000
1320
3961050
... More
MASONRY WORK // Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: // Cement mortar 1:6 (1 cement : 6 coarse sand)
150
6658
998737.5
... More
MASONRY WORK // Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : // Cement mortar 1:6 (1 cement : 6 coarse sand)
180
8288
1491903
... More
EARTH WORK // Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
9000
2161
19450800
... More
ROAD WORK // MISCELLANEOUS // Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the 19 barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge.
800
2827
2261920
... More
Exploratory drilling of boreholes down to required depth, drilling of 150mm dia. 1 boreholes in all type of soils except hard rock & large boulders (boulder core more than 30cm) including refilling, reinstating surface and disposing off surplus material including use of mechanical rigs with power operated winches as well as percussion/chiselling tool for advancing through occasional seams of hard strata to be employed, where necessary in Dry area. 0m to 10m
500
1065
532500
... More
Exploratory drilling of boreholes down to required depth, drilling of 150mm dia. 2 boreholes in all type of soils except hard rock & large boulders (boulder core more than 30cm) including refilling, reinstating surface and disposing off surplus material including use of mechanical rigs with power operated winches as well as percussion/chiselling tool for advancing through occasional seams of hard strata to be employed, where necessary in Dry area. 10m to 20m
500
1118
559260
... More
Exploratory drilling of boreholes down to required depth, drilling of 150mm dia. 3 boreholes in all type of soils except hard rock & large boulders (boulder core more than 30cm) including refilling, reinstating surface and disposing off surplus material including use of mechanical rigs with power operated winches as well as percussion/chiselling tool for advancing through occasional seams of hard strata to be employed, where necessary in Dry area. 20m to 30m
500
1177
588695
... More
Conducting in-situ full size Plate Load Test (PLT) at selected location as per IS:1888 including making loading arrangements & casting of RCC/cast in-situ concrete footing as per codal provisions including excavation and refilling of trial pit. Plate size 30cm x 30cm
3
20069
60207.18
... More
Conducting in-situ full size Plate Load Test (PLT) at selected location as per IS:1888 including making loading arrangements & casting of RCC/cast in-situ concrete footing as per codal provisions including excavation and refilling of trial pit. Plate size 45cm x 45cm
3
24082
72248.64
... More
Taking out 100mm dia. & 450mm long undisturbed samples of soil from bore holes, 6 including provision of air tight containers for packing and, labeling incl. transporting the samples to laboratory. Piston sampler shall be used for extracting undisturbed samples where necessary. Samples shall be collected as per IS:2720.
520
137
71661.2
... More
Taking out 100mm dia. & 450mm long disturbed samples of soil from bore holes, including provision of air tight containers for packing, labeling and transporting the samples to laboratory. Samples shall be collected as per IS:2720.
520
147
76528.4
... More
Conducting standard penetration test as per IS:2131 at approximate1.5m intervals in bore holes, as directed by the Engineer in charge 9
520
802
417435.2
... More
Collection of water samples at required intervals
180
227
40941
... More
Conducting laboratory Tests on collected soil samples as per relevant IS code Moisture Content/Dry Density
8
267
2140.72
... More
Conducting laboratory Tests on collected soil samples as per relevant IS code Atterberg Limits
8
535
4281.44
... More
Conducting laboratory Tests on collected soil samples as per relevant IS code Specific Gravity
8
535
4281.44
... More
Conducting laboratory Tests on collected soil samples as per relevant IS code Grain size analysis including Hydrometer analysis
8
735
5886.96
... More
Conducting laboratory Tests on collected soil samples as per relevant IS code Direct Shear Test
300
2006
602073
... More
Conducting laboratory Tests on collected soil samples as per relevant IS code Consolidation Test
150
6689
1003453.5
... More
Conducting laboratory Tests on collected soil samples as per relevant IS code Tri-axial Test
300
2006
602073
... More
Conducting Laboratory tests on collected ROCK SAMPLES as per relevant IS code Density Test
6
267
1605.54
... More
Conducting chemical analysis of soil samples to determine aggressiveness in relation to attack on concrete / reinforcement including determination of pH value
3
1337
4013.82
... More
Providing, fabricating & fixing in position to exact design profiles, H.T.S. cables of all classification made from Low Relaxation strands conforming to IS:14268- latest version in Pretensioned 19 Prestressed Concrete girders/slabs etc. including supplying, cutting, making into cables with necessary spacers, colour coding, protecting with water soluble oil at all time, placing, bending, routing, fixing, stressing including all lead and lift with contractor's own materials, labour, equipments etc. complete as per drawings & specifications. Payment shall be made in terms of weight of HTS cables as per drawing.
35
110537
3868802.35
... More
Any other items of work not covered by the above items but based on the DSR/2021 edition with all correction up -to-date.
-
-
7000000
... More
Any other items of work not covered by the above items but based on the USSOR/2021 edition with all correction up -to-date.
-
-
3164610.25
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%