MP Laghu Udyog Nigam Limited Tender

Lift/ Elevators- Supply, installation, testing, commissioning, and final testing of automatic lift complete in the shaft well and pit already constructed as per CPWD specification including automatic rescue device (ARD), All standard equipments, accessories and control equipments as per manufacturer's design and as per CPWD specification (Part III LIFTS) on turnkey basis, Conforming to NBC/statutory norms and fulfilling following requirements. (i) Type: Passenger lift. (ii) Load: As specified elsewhere from 4 passengers (272Kg) to 26 passengers (1768Kg) (for each person standard weight 68Kg.). (iii) Speed: 1.00 metre/sec. or less as required. (iv) Control: ACV3F, 32bit microprocessor integrated serial communication control system with RMS (remote monitoring system)/BMS (building monitoring system) supporting software. (v) Motor/machine: Permanent magnetic synchronous gearless motor. (vi) Operation: Simplex collective selective with/without lift attendant (vii) Total rise: G+7 Floor, 8 Stoppages. (viii) Landings: All floors on same side. (ix) Floors served: G+7 Floor.

(x) Signals: Digital car position indicator, car travel direction indicator inside car & at all landings, voice annunciator with suitable music shall be provided in the lift. (xi) Shaft size: As per manufacturer's design and as per CPWD specification (Part III LIFTS), Shaft to be constructed separately. (xii) Guide rail: As per manufacturer's specification. (xiii) Lift & car size: As per manufacturer's design and as per CPWD specification (Part III LIFTS). (xiv) Car entrance: As per manufacturer's design and as per CPWD specification (Part III LIFTS). (xv) Landing entrance: As per manufacturer's design and as per CPWD specification (Part III LIFTS). (xvi) Car door: S.S. (stainless steel) hairline finish centre/telescopic opening door with vision panel. (xvii) Landing door: S.S. (stainless steel) hairline finish centre/telescopic opening door with vision panel. (xviii) Door operation: Automatic electric power operated door, full height infrared curtain with multiple criss/cross light beams. (xix) Car interior: S.S. (stainless steel) panel with hair line finish on all sides. (xx) Car floor: Anti skid PVC flooring on heavy duty M S (mild steel) platform. (xxi) Car ceiling & lighting: S. S. (stainless steel) finish with aesthetic appearance with LED ceiling lights (xxii) Carventilation: Pressure fan/blower fan (car fan with automatic sleep timer shall be provided). (xxiii) Emergency lighting in car: Battery operated emergency lighting in the lift car (xxiv) Intercom system: Battery operated intercom system in lift car, machine room and ground floor/control room. (xxv) Emergencyalarm: Battery operated alarm bell system in lift car & control room / ground floor.

(xxvi) Position of machine room: Directly above the hoist-way. (xxvii) Electric power supply: AC 415 V, 3 phases 50 Hz & AC 230 V 1phase 50Hz terminated in machine room. (xxviii)Fire man switch : Fire man switch at machine room/terminal landing (xxix) All car panel buttons and all floor switches must be with Braille language as per lift act. (xxx) Audio visual indication in the lift car showing overloading shall be provided such that doors keep open till excess load is removed. (xxxi) Spring buffer/hydraulic buffer shall be provided (xxxii) Mechanical over speed governor, door key holes in the floor doors shall be provided. (xxxiii) Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the lift agency, along with the other steel structure works, foundations for the machines etc. (xxxiv) In the hoist way fascia plate shall be provided. (xxxv) Permanent wiring in lift machine room and lift well with proper no. of light points, with fixtures, exhaust fan, plug points and 3 phase 440V power supply shall be made in lift shaft by the department, machine room or at desired level. (xxxvi) Car top safety barricade shall be provided.