Locker Tenders

Locker Tenders

Nuclear Power Corporation Of India Limited - NPCIL Tender

Goods
Machinery and Tools...+2Electrical Goods and Equipments, Electrical and Electronics
GEM
Tapi, Gujarat
Description: CATEGORY: 1_Supply of 1000 mm OD Neoprene rubber bellow _ 1013 mm GT side _ as per specification in Drawing K-12-51130- 2512-ED and K-12-51130-2513-ED , 2_Installation of Neoprene rubber bellow 1000 mm OD _1013 mm GT side _ as per specification in Drawing K-12-51130-2512-ED and K- 12-51130-2513-ED , 3_Supply of 1000 mm OD Neoprene rubber bellow as per specification in Drawing K-12-51130- 2512-ED and K-12-51130-2513-ED , 4_Installation of Neoprene rubber bellow 1000 mm OD as per specification in Drawing K-12-51130-2512-ED and K-12-51130-2513-ED , 5_Supply of 680 mm OD Neoprene rubber bellow as per specification in Drawing K-12-51130-2512-ED and K-12- 51130-2513-ED , 6_Installation of 680 mm OD Neoprene rubber bellow as per specification in Drawing K-12-51130- 2512-ED and K-12-51130-2513-ED , 7_Installation of 500 mm OD Neoprene rubber bellow at Generator terminal as per specification in Drawing K-12-51130-2511-ED , 8_Supply of spare 500 mm OD Neoprene rubber bellow Generator terminal as per specification in Drawing K-12-51130-2511- ED , 9_Supply and installation of IPBD Inspection Window Gasket and repairing of lock nut arrangement as per specification in Drawing K-12-51130-2524-ED and K-12- 51130-2544-ED , 10_Installation of 1000 mm OD seal-off bushing as per specification in Drawing K-12-51130-2529- ED , 11_Supply of 1000 mm OD seal-off bushing as per specification in Drawing K-12-51130-2529-ED , 12_Installation of 680 mm OD seal-off bushing as per specification in Drawing K-12-51130-2529-ED and K-12- 51130-2508-DD , 13_Supply of spare 680 mm OD seal-off bushing as per specification in Drawing K-12-51130-2529- ED and K-12-51130-2508-DD , 14_Installation of 24 kV Bus support insulator as per specification in Drawing K-12- 51130-2527-ED and K-12-51130-2525-ED , 15_Supply of spare 24 kV bus support insulator as per specification in Drawing K-12-51130-2527-ED and K-12-51130-2525-ED
Closing Date18 Jan 2025
Tender Amount₹ 2.9 Cr 
This is an estimated amount, exact amount may vary.

Nuclear Power Corporation Of India Limited - NPCIL Tender

Goods
Machinery and Tools
GEM
Corrigendum : Closing Date Modified
Tapi, Gujarat
Description: CATEGORY: Supply of spare Relief Valve part no A3801 000 0000 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare GUIDE part no 103359 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare SPRING WASHER part no 103478 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare ADJUSTING.BOLT part no 103479 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare LOCK NUT part no 103480 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare SET SCREW part no 104150 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare DISC INSERT part no 136980 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare NOZZLE RING part no 137302 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare DISC HOLDER part no 147158 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare RETENTION CLIP part no 147601 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare GASKET SET part no 108305 A for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare SPINDLE ASSY part no S60668 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare NOZZLE part no 102701 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506
Closing Date21 Feb 2025
Tender AmountRefer Documents 

Ministry Of Defence - MOD Tender

Goods
Machinery and Tools
GEM
Corrigendum : Corrigendum Added
Tiruvallur, Tamil Nadu
Description: CATEGORY: THRUST WASHER , SEALING RING A 10X14 , O RING 47X2 , GASKET RING 14 2 18 2 , O RING 6X1 7 , O RING 13 3 2 4 , O RING 34X2 , ALLEN SCREW M6X90 , WASHER 8 4 , O RING 1 7 , CONNECTOR SHEATH , NEEDLE JET 2 72 , FLOAT NEEDLE VALVE W VOTON TIP , FLOAT NEEDLE CLIP , JET 85 , MAIN JE 155 , O-RING 46X3 , O RING 6 4X1 8 , O RING 57X3 , GASKET RING A 16X22 , O RING 10 82X1 78 , THRUST WASHER 12 5 1 , SHIM , O RING 7X2 N , GASKET , O RING 5X2 , SPRING , S M8X186 , STUD M8X200 , COMBINED SCREW M4X12 , COLL CAP NUT M8 , SPRING WASHER 8 3 13 6 0 4 , O RING 62X1 5 RING 9X2 , O RING 16X5 , ROTARY SEAL , OIL SEAL 32X52X7 OIL SEAL A 12X30X7 FPM , CABLE CLAMP 8 M5 , CABLE CLA 15 M5 , CLAMP 59 , MARKING SLEEVE 1 , MARKING SLEEVE 2 MARKING SLEEVE 3 , MARKING SLEEVE 4 , RUBBER PLATE , DIAPHRAGM , FLOATS BRACKET , TIE WRAP 142X3 2 MM , SCREW SET CRANKCASE , PIN , PIN D8X20 , DOWEL 10 8X25 OIL SEAL 6X11X3 4 5 , RING HALF , COUNTERSHUNK SCREW M5X12 , SLOTTED HEAD SCREW M3X6 , COLLOR NUT M8 , H NUT M5 , LOCK WASHER 16 , CIRCLIP , RETAINING RING 52X O RING 6X1 9 , O RING 19X2 , O RING 30X2 5 , O RING 5X1 5 RING 2 5X1 5 N , BRACKET , TUBE , DIFFUSER , JET NEEDLE , FIXATION SCREW , SLEEVE , IDLE JET 30 , IDLE JET 35 , SPRIN CLIP , THROTTLE VALVE
Closing Date29 Jan 2025
Tender AmountRefer Documents 

Indian Army Tender

Goods
Furnitures and Fixtures
GEM
Corrigendum : Corrigendum Added
Mumbai, Maharashtra
Description: CATEGORY: Foam Mattress (V2) (Q2) , Top of table dinning , Seat for sofa , Top of school desk , Teak wood rails , Foot rest for bed , Top of table , Head rest for bed , Decorative Handle stainles steel , Back rest of school desk , Tapestry Cloth , Mirror with Frame for table dressing ladies , Back for sofa , Teak wood Arms , Mirror with Frame for table dressing Gents , long rail for bed hard , S and S lock 4 and 6 lever for Almirahs , Top of table centre , Looking Mirror for Table Dressing gents , Seat of school desk , Top of table office clk , PVC Seat , Top of teapoy , Fevicol , French Polish ready made , Mirror 5 5mm thick , Colour powder Ambar , Chandrus Powder , PVC seat , 1st class timber wood beading , Amber Turkey powder , Lamb Black Powder , Touch wood , Arm rest teak wood , Top of teapoy verandah , Top of table writing , 50mm dia heavy duty nyln wheel for chair revolving , School chair with desk S and F , Cane Plastic 4mm wide , Teak wood front Legs , Lakhdana , Teak wood front legs , Cane Plastic 2mm or 1 8mm wide , Telescopic Channel of size 20 , Cloth Malmal , Knobs 40mm fancy type , Bee wax white Powder , Teak wood front rail side , Bamsena Powder , Colour powder Kesari , front teak wood leg , Castors wheel for chair revolving computer , Top of table peg , Cora Cloth White cloth BI , 5mm thick glass sliding for dressing table ladies , Bracket for chair dining , Teak wood legs , 75 mm long S and S Handle for Ladies dressing Mirror , Piano type continuous Hinges 20mm , Teak wood legs for table writing , Teak wood Arms rest , Teak wood rear leg , Glass 5mm th , Nuts and bolts 2 1 2 inch x 3 or 16 , S and S 50mm Handle for bed side table map , Hard rubber shoe 20mm dia , Wooden Screw shaved lead , Wooden screw shaved head , Hard PVC Ring 20 mm dia for chair , Clips for fixing almirah shelves , Foam Cushion 100mm thick 40 Density of size 25 inch x 21 inch x 100mm duly covered with tapestry cloth complete , Tapestry cloth for sofa set 05 seater and 4 seater with white colour duly stiched , Cloth malmal , French polish , French polish orange , Yellow Powder for french polish
Closing Date7 Feb 2025
Tender Amount₹ 24 Lac 
This is an estimated amount, exact amount may vary.

Indian Army Tender

Goods
Machinery and Tools
GEM
Jhansi, Uttar Pradesh
Description: CATEGORY: Fan Belt Vee Ribbed Cat Part No 10X550 , Nut lock Cat Part No 10X643 , Seal, Oil Ring Cat Part No 10X539 , Suction Hose Hyd Pump Cat Part No 3H0772 , Loader Arm Pin Tower End Cat Part No 3B 0091 , Loader Arm Bushes Tower end Car Part No 3B0076 , Loader Arm Pin Bucket End Cat Part No 3B0090 , Bucket Cylinder head End hose Cat Part No 3H0436 , Loader Arm Bushes Bucket end Car Part No 3B0083 , Suction hose Charge pump Cat Part No 3H0773 , Bucket Intermediate hose Cat Part No 3H0437 , Flat face coupling set Cat Part No 3H0439 , Flat face coupling set Cat Part No 3H0440 , Bucket Cylinder Seal Kit Cat Part No 10X323 , Hand pump seal kit Cat Part No 10X0480 , Cabin cylinder seal kit Cat Part No 10X903 , Loader lift Cylinder Hose Rod End Cat Part No H0435 , Bushes cabin lift cylinder Cat Part No 10X901 , Bush lift cylinder Cat Part No 10X0920 , Bushes Bucket Cylinder Head End Cat Part No 10X938 , Bushes Bucket Cylinder Rad End Cat Part No 940 , Arm Cylinder Seal Kit Cat Part No 10X321 , Loader lift Cylinder pipe Rod End LH Cat Part No 3H0379 , Loader lift Cylinder pipe Rod End RH Cat Part No 3H0381 , Battery Isolator Cat Part No D0015 , Fuel Filter cartridge Cat Part No 10X0620 , Element lubricating Oil filter Cat Part No 10X0619 , Air Filter Element Inner Cat Part No 10X471 , Air Filter Element Outer Cat Part No 10X0472 , Hydraulic Filter Cat Part No 3512254M1 , Solenoid for self-starter , Bush for self-starter , Field for self-starter , Armature for self-starter , Bush carrier for self-starter
Closing Date29 Jan 2025
Tender Amount₹ 2.9 Lac 
This is an estimated amount, exact amount may vary.

Ministry Of Defence - MOD Tender

Goods
Automobiles and Auto Parts
GEM
Jabalpur, Madhya Pradesh
Description: CATEGORY: P1 155SW SV LV7 1147787 PROTECTION EXHAUST SYSTEM , 155SW SV LV7 1168243 ENGINE BONNET RIGHT FRONT ENG HOUSING , P1 155SW SV LV7 4070865 CLUTCH PRESSURE PLATE WHEEL GEARING , P1 155SW SV LV7 5179694 TEMO SWITCH POWER UNIT , P1 155SW SV LV7 5181798 EXHAUST HOSE EXHAUST SYSTEM , P1 155SW SV LV7 5182560 FAN POWER UNIT , P1 155SW SV LV7 6336115 ANTI VIBRATION P COOLING SYSTEM ENG , P1 155SW SV LV7 6337567 LOCK N BRAKE CYLINDERS , P1 155SW SV LV7 6338246 HOSE CLIP EXHAUST SYSTEM , P1 155SW SV LV7 6364611 CLIP EXHAU SYSTEM , P1 155SW SV LV7 6367439 NIPPLE COMPRESSOR , 155SW SV LV7 6370131 LEVER POWER UNIT , P1 155SW SV 6370929 DRAIN PLUG COOLING ENGINE SYSTEM , P1 155SW LV7 6379152 SPANNER , P1 155SW SV LV7 MOT-505-021 VO REGULATOR POWER UNIT , P1 155SW SV LV7 ZF-446232205 BRACKE DRUM DRIVE UNIT RIGHT , P1 155SW SV LV7 A9-20 REAR BEARING ALTERNATOR , P1 155SW SV LV7 10301042 SEALING WASHER N15-10-16X20 COMP EU , P1 155SW SV L 10341477 NARROW V BELT N7-41-SPZ-1000 , P1 155SW SV 10351571 CLIP N16-49-33 , P1 155SW SV LV7 6338856 DO , P1 155SW V LV7 3049494 RIM WHEEL , P1 155SW V LV7 5162280 AXLE BRAKE CYLINDER , P1 155SW V LV7 6348608 SEALING RING WHEEL GEARING , P1 155SW V LV7 6360085 SCREW COMPRESSOR , P1 155SW V LV7 6388321 FUEL FILT POWER UNIT , P1 155SW V LV7 ZF-0501310936 ROLLER PIN DRIVE UNIT RIGHT
Closing Date1 Mar 2025
Tender AmountRefer Documents 

South Central Railway - SCR Tender

Auction
Scraps
Ireps
Corrigendum : Closing Date Modified
Hyderabad, Telangana
Description: 12261ms24i, 98050011, Quantity- 17.320 Mts. Scrap Condemned Unserviceable Ms Bed Plates, Water Tanks And Water Tank Cut Pieces, Ms Path Plates, Foot Path Plates, Sheets, Bin Cut Parts, Rack And Roller Path, Air Tank Cover Parts, Striker Casting Wear Plates, Sliding Doors, Swing Doors, Flap Doors, Ms Chequered Plates, Expansion Tank Parts, Ms Plates, Plate Cuttings, Wagon Doors, Dsl Engine Long Hood, Dummy Bogie Cut Parts, Cast Iron Surface Plates And Base Plates, Axle Counter Ms Frames, Baking Oven Cut Pieces, Ocb Duct, Welding Machine Outer Body, Inverter Empty Body, Tap Changer Ms Spares And Empty Body, Manipulator, Shaping Machine Ms Body, Ms Gates, Collapsible Gates, Base Plate, Short Hood Cabin Cut Parts, Tables, Racks, Lavatory Chute Brackets, Ms Travelling Base, Ms Danger Boards, Radiator Ms Spares, Ms Die Blocks, Ms Body Of Radiator Fan Motor, Capacitor Ms Body, Auxiliary Transformer Ms Empty Body, Ducts, Dust Bin Stand, Ht Load Brake Switch Body, Ms Transformer Body, Ventilator Motor Frames, Transformer Top Plate, Air Receiver, Storage Box Cut Parts, Coach Body Parts, Dust Bins, Lockers, Cattle Guard, Incinerator Chimney Parts, Incinerator Oven, Incinerator Cut Parts, Boxes, Wagon Doors Cut Pieces, Wagon Bfr End Plates And Cut Pieces, Ms Fuel Tanks [fire Prone], Boiler Tank Cut Pieces, Angles, Girder, Sheets Cut Pieces, Portable Stands, Channels ,fabricated Structures And Other Corroded Heavy Melting Scrap Of Different Thickness Of Sorts And Sizes, With Or Without Attachments. Note- 1. Gas Cutting Permitted For The Purpose Of Loading Only. 2. It Is The Responsibility Of The Purchaser To Ensure That Fuel Tanks To Be Filled With Water And Cleaned Thoroughly Free From Flammable Substances Before Cutting To Avoid Explosion Or Any Casualties. 3. Private Crane Permitted For Loading. Special Note- Gas Cutting For Fuel Tank Should Be Done In Open Area [cutting Must Be Kept Clear And Free Of Flammables] And Away From Bins [free From Recognized Hazards That Are Causing Or Are Likely To Cause Serious Harm] And Should Follow Fire-prevention And Fire-protection Measures. Location- [bin No- 261, Left Side Of Road No- 2]. Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery As Per Mv Act 1988
Closing Date30 Jan 2025
Tender AmountRefer Documents 

Indian Army Tender

Goods
Furnitures and Fixtures
GEM
Corrigendum : Corrigendum Added
Srinagar, Jammu & Kashmir
Description: CATEGORY: Tower Bolts (Ferrous Metals) as per IS 204 (Q3) , Copper Alloy Fancy Taps for Bathroom as per IS 8931 (Latest) (Q3) , Piano Type Modular Domestic Fan Regulator as per IS 11037 (Q3) , PVC Seat 4 mm thick for chair dinning , Varnish in 4 ltr pack , Tapestry cloth of superior quality , Aluminium sheet 1 mm thick and 3 feet width , Rexine brown colour , 18 mm thick prelaminated MDF Board exterior grade of size 6 ft x 3 ft with 2 mm thick , 18 mm thick prelaminated MDF Board exterior grade of size 5 ft x 3 ft with 2 mm thick , 18 mm thick prelaminated MDF Board exterior grade of size 3 ft x 2 ft with 2 mm thick , 18 mm thick prelaminated MDF Board exterior grade of size 6 ft x 2 ft with 2 mm thick , 12 mm thick plywood of size 6 ft x 3 ft , 6 mm thick plywood of size 8 ft x 4 ft , 18 mm thick plywood of size 8 ft x 4 ft , 12 mm thick plywood of size 8 ft x 4 ft , 3 mm thick plywood of size 8 ft x 4 ft BWR grade , Lock for Almirah Steel , Chrome plate Steel handle for almirah , Wheels for chair revolving , Mirror for table dressing Gents 900x300x5 mm thick , Foam Sheet 1 inch thick 6ft x 3 ft 32 density , Foam Sheet 2 inch thick 6ft x 3 ft 32 density , Foam Sheet 3 inch thick 6ft x 3 ft 32 density , Piano Type Hinge 18 mm 6 ft long , Batten Teak Wood beading half round 6 mm thick 18 mm wide , Ready made seat and back for chair writing FD 1005 , Stainless steel handle round D type 4 inch , plain Glass 3 ft x 3 ft x 5mm thick , Aluminium sliding channel , Soft closer telescopic drawer cahnnel capacity 45 kg size 45 cm , Bow door handle 150 mm , Glass Plain 4 ft x 3 ft 5 mm thick , Anchor roma blank plate , Engage Bulb zero watt , Gyser Nut and bolt , Thermosatat long 350 mm
Closing Date6 Feb 2025
Tender Amount₹ 30.1 Lac 
This is an estimated amount, exact amount may vary.

Hindustan Urvarak And Rasayan Limited - HURL Tender

Goods
Machinery and Tools
GEM
Gorakhpur, Uttar Pradesh
Description: CATEGORY: Actuator repair kit PDV 9123 for 102 J , PACKING FLANGE PDV-9123 for 102-J , GUIDE BUSHING PDV-9123 for 102-J , PIN GROOVE 188 for PDV 9323 , PACKING FOLLOWER for PDV-9123 , GUIDE BUSHING PV9153A for 102-J , SPRING LOCK WASHER for PV9153A , CAGE 21K 3 QC 150 600 PV9153B for 102-J , PACKING FLANGE FOR PV9503B , PACKING FOLLOWER for PV-9503B , BUSHING 1 2NPTx1 4NPT PV9503B for 103-J , GUIDE BUSHING PV9503B for 103- J , CAGE 2B CL2500 PV4103A , GUIDE BUSHING PV4103A , BUSHING 87,88 ACT PV4103Afor GB101 , SET OF GAUGE,D40,7 kgf700 kPa , Actuator repair kit TV9118 for 102-J , Actuator repair kit 720050179-999-0000 , GUIDE BUSHING TV9218 for 103-J , CAGE 21K .75-1 PDV9354 for 105-J , PIN GROOVE .188 ID .750 L TYPE 3 ESV9132 , PV- 4103B, CAGE 21K 3 QC 150600 , PV-9153A,CAGE 21K 1.5-2 , CAGE 21K 6 FOR PV9503B , GUIDE BUSHING PV4103B , PLUG 21K 1.5-2 150-1500CV 8 FOR PV9503A , PIN GROOVE TYPE C 4.78 X 35 of PV9153B , DRIVE SCREW TYP U SET OF 4 NOS , GASKET SPIRAL WOUND FOR PCV4021 , PLUG STEM ASSEMBLY FOR PDV-9324 , Actuator repair kit for PCV4021 , PLUG ASSEMBLY PV-9153A for 102-J , XV-9408 GASKET SET FOR SEAT AND BONNET , XV-9408 SEAT 21K 1.5 FA QC 1.250 ORIFICE , XV-9411 SEAT 21K 1.5 FA QC 1.250 ORIFICE , PDV-9123, GASKET SEAT RING , PV-9153B, GASKET SEAT RING , PDV-9123, GASKET SPIRAL WOUND , PV-4035, GASKET SPIRAL WOUND , PDV-9123, PACKING,22.4x12.7x4.8 , PV-9503B, PACKING,31.8x19.1x6.4 , PDV-9324, PACKING,22.4x12.7x4.8 , TV-9118, BODY GASKET , TV- 9218, BODYGASKET 146.5X134.5X3.2 , TV-9318, BODYGASKET , PV-9153B, GASKET BODY
Closing Date17 Feb 2025
Tender Amount₹ 19.3 Lac 

Department Of Atomic Energy - DAE Tender

Goods
Machinery and Tools...+2Electrical Goods and Equipments, Electrical and Electronics
GEM
Corrigendum : Closing Date Modified
Bhadradri Kothagudem, Telangana
Details: Supply, Installation And Testing Of Spares For 1020kg Freight Cum Passenger Type Elevator. Brake Liner. , Hoist Way Limit Switch , Down Or Up Limit Switch , Car Top Switch , Control Push Button Sspl Or Pbs Or 101, Ip-55, Flp -cop Plate Size - 428 X 428, Lop Plate Size- 240 X 240 , Auxiliary Relays Of Each Type , Display Card - Digital-24v , Main Control Card - Arl-300 , Ard Card , Flp Fan , Single Phase Preventer , Proximity Switch , Control Transformer , Car Shoe Liner , Counter Weight Shoe Liner , Door Gibes , Brake , Car Gate Switch , Final Limit Switch , Car And Landing Push Button - Flp , Door Closure , Door Lock , Car Top Light Led , Led Light In Car , Collapsible Gate Switches
Closing Date4 Feb 2025
Tender AmountRefer Documents 
3561-3570 of 3690 archived Tenders