Locker Tenders

Description: CATEGORY: Spare Butterfly valve assembly as per specification item no 1 , Spare disc as per specification item no 2 , Spare Seat as per specification item no 3 , Spare Taper Pin with Heli Lock Nut as per specification item no 4 , Spare Glacier Bearing as per specification item no 5 , Gland Packing as per specification item no 6 , Bottom Packing as per specification item no 7 , Hand Wheel as per specification item no 8 , Seal Kit for Double Acting Rack as per specification item no 9

Description: 98050060 Scrap Ferrous Material Consisting Of Cast Steel Coupler Body, C.p. Top, Screw Coupling, C.p. Bottom, C.p. Bolt, Knuckle, Yoke Support Plate, Cast Steel Yoke And Cut Pcs Yoke Of Short And Sizes. Axle Box, Cbc Lock, Back Stopper, Kicker, Toggle Empty Body Of Draft Gear And Draft Gear Parts, Front Follower, Buffer Plunger, Buffer Socket, Axle Box Cap/cover Backing Ring (outer/inner), Axle Box With Or Without Bearing Stricker Casting And Other Small Cast Steel Items If Any. Note:-1. Wide Jaw And Narrow Jaw Adopter, Empad And Complete Draft Gear Not To Be Delivered. 2. Private Crane Allowed For Easy Loading

Description: Set Of Operating Device Arrangement For Cbc Assembly As Per sr.dee/rs/nr/ Gzb Drg. No. 214/3 Phase/2010 Sheet No. 1 & 2 Alt-1. One set Consists 10 Items 13 Nos As Per Sr.dee/ Rs/nr/gzb Drg. No. 214/3phase/2010 Sheet No. 1 & 2 Alt-1(1) Operating Rod With Handle qty-01 No. (2) Cbc Opening Rod Qty-01 No.(3) Bracket Short Qty-01 No. (4) Bracket Long Qty-01 No.(5) Locking Piece Qty-01 No.(6) Special screw Qty. 01 No.(7) Make Up Piece Qty. 01 No. (8) Screw M-6x85 Lg Qty- 02 Nos.(9) Nut Hex M8 Qty-02 Nos.(10) Allen Bolt M8x20 Lg Qty-02 Nos

Description: Divisional Stores Depot-guntur [andhra Pradesh] Condemned And Unserviceable Ms Scrap Consisting Of Released Of Various Types Of Cut Off Angle Cock, Inner Springs, Outer Springs, Snubber Springs, Snubber Springs Hs, Adopter Narrow Jaw, Operating Handle, Hand Brake Wheels And Rods, Curved Sheets All Types, Flap Doors For Box/n, Flap Doors For Bcn, Primary Vertical Damper, Primary Spring For Lhb Non-ac Coaches (outer), Primary Spring Outer For Generator Car, Primary Spring Outer For Chair Car, Primary Spring For Lhb Non-ac Coaches (inner), Foot Step Arrangement To Icf, Foot Step Arrangement To Icf, Yaw Damper, Lever Hanger 20x100x382 (without Bushes), Lever 20 X 100 X 522mm Without Bushes, Double Acting Hydraulic Shock Absorber For Vertical Application [600 Kgs Capacity], Cut Off Angle Cock With Vent For Coaching, Push Type Flushing Valve[powder Coated] For Non-a.c Coaches To Icf, Destination Board, Special Destination Board To Icf, Articulated Lock Lift Assembly, Coupler Body With Shank Wear Plate, Knuckle Conforming To Str No. Wd-70-bd-10 (rev.2, Wearing Plate Finish Machined For Side Bearer, Hanger For Bogie Bolster Suspension, Gangway Bridge Mounting Complete, Ball Valve 1" Iron, Helical Spring [centre Less Ground] For Bogie Bolster Suspension, Brake Beam Complete [without Bush] Dimension 1752mm [distance Between Two Holes Of Dia 14mm Should Be Equispaced From Centre Line, Galvanized Mild Steel Tubes 25 Mm, M.s Equal Leg Angles 40x40x6mm, Mild Steel Sheet, Broken Bolster For Freight And Other Ms Scrap .etc., Total Weight: 11.240 Mts. Location: In Bin No: 15. Delivery On Actual Weighment Basis Only. Note: Cutting Is Permitted Into Loadable Sizes Only.

Description: CATEGORY: SEAL KIT CYLINDER ASSEMBLY MODEL NO SKT 2" -1" -10" DOUBLE ACTING-MAPP-1/35210/2573/GA FT BALL VALVE , SEAL KIT CF CYLINDER , MINI DOOR , SEAL KIT FOR VELJAN 5 BORE X 1 DIA PISTON ROD X 2 STROKE LOCK OFF CYLINDER

Description: Condemned And Unserviceable Cl.iii Released 210 Ltr Capacities Barrels Full/damaged [diesel Barrels - 38 Nos, Grease Barrels - 22 Nos, Tar Barrel- 4 Nos.] With Or Without Sediments, Lid/locking Arrangements On As Is Where Is Basis. Qty- 64 Nos[aprrx Weight- 1266 Kg]. S.1539 No. 692869 Dated 15.03.2025.

Description: Scrap Heavy Melting Components Consisting Of Items, Pcs. And Cut Pcs. Of Plates, Angles, Silent Block,side Bearer Pad Assembly ,metal Rubber Bonded,bp Valve Fp Valve ,cut Pcs Of Metal,channels, Bss Hanger,bump Stop,parting Plate,rounds, Back-stop, Pu Pad,bk-head Spindles, Connecting- Links, Rotory Lock, , Cut Of Angle Cock, Pins, Dirt Collector, Brake Head,, Face Plate,brake , Anchor Link,control Rod,dummy Coupling,shackle Pin, Yoke Pin, Safety Wire Rope,draft Gear Pad,axle Guard With Horn Check,different Type Of Levers,screw Coupling,draw Bar Hook, Bk Beam Hanger,empty Load Box, C.c. Pad Top & Bottom,side Bearer,stricker Casting,yoke Support Plate, Horizontal Lever Set, Main Pull Rod, Empty Tie Rod, Hand Bk Screw, Hand Bk Gear Box,toothed Segment,dirt Collector, Protactiv Tube, Sleeve, Axle Box Guide, Isolated Cock And Mixed With Pins And U/s Broken Parts Of C&w Item Etc Of Sorts & Sizes With Or Wo Attachment Us And Ur, As It Is. Loc- Material Lying At Bin No. A-39 In Scrap Yard Judw. Remarks- Loading By Purchaser. Note-nfs Will Be Taken Back If Found In Lot At The Time Of Delivery.

Description: Locking Bolt For Flap Door Of Boxn, Boxnhs Wagon (washer 30mm Od, 18mm Id, 5mm Thickness With 6mm Dia Pin-41mm Long Should Be Supplied In Loose Condition) To Rdso Drg.no. Wd-90007-s-1, Item-15, Alt:21.

Description: CATEGORY: End fittings (finish machined) as per TAPS-4/31120/2403/DD and Specification PB/E/00040, R0 , End Fitting Flange for Coolant Tube rolling, drawing no. TAPS-4/31120/2421/DD & PB/E/00040, R0 , EF spool-A, CS ring shrink fitting mockup, drawing no. TAPS-4/31120/2428/DD and TS no. PB/E/00040, , EF spool-B for CS ring shrink fitting mock-ups, drawing no. TAPS-4/31120/2428/DD & TS no. PB/E/00040 , EF spool-C for CS ring shrink fitting mock-ups, drawing no. TAPS- 4/31120/2428/DD & TS PB/E/00040, R0 , Lattice Tube for 16 channel Mock up as per drawing no. TAPS-3/31610/2507/DD and 2506/DD , Lattice tube 100mm long from 241.25 mm Dia End for weld qualification drg no. TAPS- 3/31610/2506&07/D , Liner Tube as per drawing no. TAPS- 4/31120/2402/DD and Specification PB/E/00041, R0 , Liner Tube Spacer (Button) as per drawing no. TAPS- 4/31120/2402/DD and Specification PB/E/00041, R0 , Liner Tube Spool for rolling qualification as per drawing no. TAPS- 4/31120/2424/DD and Specification , Liner Tube Flange for rolling qualification-drawing no. TAPS-4/31120/2423/DD & TS no. PB/E/00040, R0 , Journal Ring, Cal. Side (Tool Steel AISI-D-2) drawing no. TAPS-4/31150/2401/DD & TS PB/E/00042, R0 , Journal Ring, FM Side as per drawing no. TAPS-4/31150/2401/DD and Specification PB/E/00042, R0 , Bearing Sleeve FM side for 16 Ch. Mock up drg no. TAPS- 4/31150/2401/DD & TS no. PB/E/00042, R0 , Bearing Sleeve Cal. Side side for 16 Ch. Mock up drg no. TAPS- 4/31150/2401/DD & TS no. PB/E/00042, R0 , Bearing Sleeve Retainer ring FM side for 16 Ch Mock up drg no. TAPS- 4/31120/2414/DD & PB/E/00043, R0 , Bearing Sleeve Retainer ring Cal. Side for 16 Ch. Mock up drg no. TAPS- 4/31120/2414/D & PB/E/00043R0 , EF Retaining ring as per drawing no. TAPS-4/31120/2414/DD and Specification PB/E/00043, R0 , Split Sleeve Assy. (CS- IS: 2062GrA, Zn plated) drg no. TAPS-4/31120/2413/DD & TS no. PB/E/00044, R0 , Bellows attachment Ring (CS-A519 Gr1025) drg no. TAPS-4/31120/2409/DD & TS no. PB/E/00045, R0 , SS Seal Ring in Bellows 308L/321L as per drawing no. TAPS-4/31120/2409/DD & TS no. PB/E/00045, R0 , Yoke of Position Assy drg no. TAPS-4/31120/2407/DD and Specification PB/E/00046, R0 , Stud 17-4 PH M-30 x 2- 6g as per drawing no. TAPS-4/31120/2408/DD and Specification PB/E/00047, R0 , Unthreaded Fixing Block (Part no. 2) SS-193 (Yoke Assembly) as per drawing no. TAPS-4/31120/2410/DD , Unthreaded Fixing Block (Part no. 2A) SS-193 (Yoke Assembly) as per drawing no. TAPS- 4/31120/2410/DD , Threaded Block (Part no. 3) as per drawing no. TAPS-4/31120/2410/DD , Threaded Block (Part no. 3A) as per drawing no. TAPS-4/31120/2410/DD , Square head screw M-10 x 1.25-6g (850 x 4) as per drawing no. TAPS-4/31120/2410/DD , Hex. Main Nut (850 x 2) as per drawing no. TAPS-4/31120/2410/DD , Hex. Lock Nut as per drawing no. TAPS-4/31120/2410/DD , Spring Washer (B-10) as per drawing no. TAPS-4/31120/2410/DD , Spring Washer (B-30) as per drawing no. TAPS-4/31120/2410/DD , Hex Soc. Headed Cap Sc. M4 x 0.7 x 8lg as per drawing no. TAPS- 4/31120/2410/DD , Master gauge for Dimension (L-27, C-4, L-30, B-10, C-8) as per TS no. PB/E/00040, R0 , Working gauges for Dimension (L-27, C-4, L-30, B-19, C-8) as TS no. PB/E/00040, R0 , Landed Sleeve Insert (SS-410) for CT Rolling as per drawing no. TAPS-4/31610/2414/DD , CSTS Flanges (SS304L) for CT rolling as per drawing no. TAPS- 4/31610/2414/DD

Description: Corroded And Rusty M.s Angle And Patra, Defective Door Locks, Head-broke Knuckle Pin, Clevis Pin, Fasteners, Pantograph Loose Parts, Pinion 3 Phase 20 Teeth, Pinion 3 Phase 21 Teeth, Hs Tm Pinion, Speed Prob. Housing, Brush Holder Sparing, Set Of Outer Bearing Cap-3 Phase Tm, Outer Labyrinth, Outer Deflector-hs, Nde End Frame-3 Phase, De End Frame-3 Phase, Hs Tm Bearing Bracket- Pe, Hs Tm Bearing Bracket-ce, Pe Bearing Cover- Hs Tm, Miscellaneous Parts Empty Damaged Barrels Of Big & Small & Empty Dpt Bottles (nut, Bolts, Bhrr Brackets, Liners, Bush, Assembly Parts, Rollers, Inspection Covers), Bearing Inner & Outer Racers, Brake Drums, Geared Wire Rope Drums, Wire Rope Pulleys, Motor End Shields, Gear Boxes, Brake Assemblies, Tank, Shafts, Foundation Base, Panel Doors, Chain Slings, Defective Radiator Stand, Defective Rps Rod, Emc Yoke, Armature, Core, Iron Part Of Epc Arc-chute, Mom Body, Nc-4 Valve Body, Hardware¿s Of Emc, Epc, Ctf/reversor, Mp,smgr Etc, Smgr Defective Cover, Epc Servomotor Spring & Piston, Ctf/reverser Contact Spring Fork, Released Liners, Bushes, Cotter Pins, Wire Rope, Cp Scrap, Cp Cylinder, Aux Motor End Shield, Cp Foundation Frame, Cp Heads, Cp Piston Rings, Aux Motor Ducts Tmb,mvsl,mvsi,dbr Empty Box, Impellers Of Aux Machines,3phase Jaali, Released Roof Sheets, Head Light Body, Headlight Reflector, Cfl Body, M.s Frame Door, Locker Iron, Cbc Loose Items, Scrapped Cattle Guard, Waste M.s Parts Removed Cabs, Iron & Steel Stools, Bend Scrap Cbc Operating Handle, M.s Rack, Chair Tubular Steel With Arm And Caned Back, Trolley 4 Wheel, Insulation Heater, Damaged Buffers, Etc. And Other Miscellaneous Release Items. (rubber Items, Non-ferrous And Other Attachment Will Not Be Delivered.) Cutting Permission Will Be Allowed For Major Part For Easy Loading. Remarks - Kachcha /pakka Approach Road Is Available Upto Lot. Lot Inspected On Visual Basis As It Is Not Possible To See Each & Every Pieces Of Lot Material For Detailed Check During Inspection. Lot Quantity Is Assessed Purely On Approximate Basis. Lot Number Is Displayed On The Board At The Lot. Segregation Is Not Allowed At The Time Of Delivery. Delivery Will Be Made On Actual Weighment Basis. Weighment Will Be Taken On Nearest Govt. Approved Weighbridge. Rubber Items, Non-ferrous Items Without Attachment, P.way Items, Battery, Brake Blocks, Drums & Ohe Structure Will Not Be Delivered At The Time Of Delivery. Delivery Will Be Made During All Seasons. If Any Addition, Deletion, Alteration & Variation Come In The Lot After Joint Inspection, Stock Holder Will Be Fully Responsible. Location - Near Cutting Yard Els/kyn. Qty - 60.000 Mts. Approx. Stock Holder - Sse (development) Els - Kyn.