Locker Tenders

Description: Locking Plate For Axle Box Of Wap4 & Wag7 Locos Etc.

Description: Lot No.m.ci-1.exmp.a,d,e & G.12.24-25.06, Description- Scrap Cast Iron Gr-i (clean Casting Readily Or Easily Broken Up For Foundry Use), Cast Iron Gr-ii (unclean Casting I.e., M.s And Other Attachments Or Burnt Heavy Casting Or Easily Broken Up For Foundry Use). (our Offer) Cst-9 Plate , Misc. Signal Items I.e. Trestle, Top And Bottom Roller, Lock Facing Point Signal Pole And Post Plain Roller, For Mod Bfr Ci Pipe, Ci Brake Block, Angle Cock, Different Types Of Valves And Cocks, Scrap Socket Bend, Cr With Common Pipe Bracket, And Other Misc Ci Items With Or Without Little Iron Or Nf Attachments As Available In The Lot. Materials Lying In Ten Places. Cst-9 Plate Scattered In 7(seven) Places At Whole ''a'' Sector, One Place At "d-2"] [one Place At "e-7"] {one Place At "g-2" ] [loading Will Be Commence From "a" Sector And Then "d" Sector] [loading Will Be Done By Purchaser's Own Arrangement]

Description: Cond. And Scrap All Type Of Steel Almirah, Book Shelf, Rack, Lockers, File Rack, Diff. Make And Diff. Sizes, With Or Without N/f Attachment, Sort And Sizes Broken And Unbroken As Is Where Is Basis, As It Is. Note - Hammering Allowed For Loading Purpose.

Description: Lot No. Lot No.- C/elst/m7/11/16, Desc.- Srl. No. (1) Clevis Pin With Washer ,srl. No. (2) Cleves For Modified Transition Screw Coupling ,srl. No. (3) Guide Bracket Assly ,srl. No. (4) Brake Shoe Key ,srl. No. (5) Brake Head Assly ,srl. No. (6) Friction Arm For Air Brake ,srl. No. (7) Brake Equaliser Assly ,srl. No. (8) Brake Equaliser Assly(hand Brake Side) ,srl. No. (9) Cbc Operating Handle ,srl. No. (10) Friction Arm Spring For Air Brake ,srl. No. (11) Safety Bracket 'l' ,srl. No. (12) Set Of Safety Bracket Bar ,srl. No. (13) Set Of Fasteners For G/case ,srl. No. (14) Hex Head Bolt, Castle Nut With Washer And Split Pin. ,srl. No. (15) Set Of Foot Step Assly ,srl. No. (16) Abutment Ring ,srl. No. (17) Set Of Step Size Racer ,srl. No. (18) Set Of Hardware Axle Box ,srl. No. (19) Set Of Axle Box Bearing Component ,srl. No. (20) Breather ,srl. No. (21) Set Of Hardware For Gear Case ,srl. No. (22) Set Of Hardware For Primary Suspension ,srl. No. (23) Set Of Sand Pipe Assly Lh & Rh ,srl. No. (24) Set Of Sanders ,srl. No. (25) Modified Foot Step Assly Rh/lh ,srl. No. (26) Mod Foot Step Lh/rh ,srl. No. (27) Operating Device Arrangement ,srl. No. (28) Brake Shoe Key With R-clip ,srl. No. (29) Adjusting Equipment ,srl. No. (30) Set Of Safety Sling G9 ,srl. No. (31) Set Of Safety Sling Wap-7 ,srl. No. (32) Set Of Pin And Bushes Wap-7 ,srl. No. (33) Liner For Kbil ,srl. No. (34) Sander With Nozzle Assly ,srl. No. (35) Sand Ejector ,srl. No. (36) Set Of Threaded Bolts ,srl. No. (37) Set Of Lock Nut ,srl. No. (38) Fs All Steel Lock Lock Nut M-16 ,srl. No. (39) Fs All Steel Lock Lock Nut M-24 ,srl. No. (40) Clamping Plate Fixation Screw ,srl. No. (41) Dummy Plug For Sanders ,srl. No. (42) Earth Return Brush ,srl. No. (43) Earth Return Brush With Holder ,srl. No. (44) Set Of Spare Kbil ,srl. No. (45) Air Pipe For Sander ,srl. No. (46) Hex Head Bolt 16 X 70 ,srl. No. (47) Knuckle Pivot Pin ,srl. No. (48) Hex Head Bolt 10 X 40 ,srl. No. (49) Hex Head Bolt 10 X 120 ,srl. No. (50) Spring Washer M16 ,srl. No. (51) Set Of Hardware For Gear Case ,srl. No. (52) Set Of Fasteners For Air Brake Gear Assly ,srl. No. (53) Set Of Fasteners 8 X 30 ,srl. No. (54) Spring Washer M16 ,srl. No. (55) Angle Ring To Nei ,srl. No. (56) Hex Head Screw 12 X 35 ,srl. No. (57) Earthing Shunt To Axle Box ,srl. No. (58) Elbow Connector For Sander ,srl. No. (59) Set Of Fasteners 8 X 40 ,srl. No. (60) Guage Glass Cover ,srl. No. (61) Threaded Stud 16 X 170mm ,srl. No. (62) Allen Screw 12 X 160 ,srl. No. (63) Cbc Locking Key ,srl. No. (64) Socket Head Cap Screw 16 X 100 ,srl. No. (65) Magnetic Sealing Plug ,srl. No. (66) Flat Washer M36 ,srl. No. (67) Pin Coil Chain R-clip For B/shoe Key ,srl. No. (68) Hex Head Screw 6 X 16 ,srl. No. (69) Locking Pin For Racer Pullar ,srl. No. (70) Air Pipe For Sand Box ,srl. No. (71) Hex Head Bolt 24 X 110 ,srl. No. (72) Pneumatic Fittings ,srl. No. (73) Manual Release Ratchet Pin Unit Assembly ,srl. No. (74) Conical Safety Washer M12 ,srl. No. (75) Conical Safety Washer M30 ,srl. No. (76) Set Of Spring Loaded Guage Glass Cover ,srl. No. (77) Set Of Pins ,srl. No. (78) Chamfered Clamp ,srl. No. (79) Spring Washer M-12 ,srl. No. (80) Set Of Ms Flat Washers ,srl. No. (81) Ht Hex Head Screw 16 X 1.5 X 50 ,srl. No. (82) Grease Sealing Plug ,srl. No. (83) Fixation Rod Of Size 340mm ,srl. No. (84) Dee Shakle Screw Pin ,srl. No. (85) Various Types Of Nuts, Bolts, Washer, Pins, Split Pins Etc. Total Ferrous Wt.- 5307 Kgs

Description: Pl No.98412103] Scrap Cond. Released Stainless Steel Scrap Such As Wash Basin, Steel Trays/putty's/ Sheets, Truff Floor Sheets, Lavatory Pan, Locking Plate, Seat Frame, Commode, Water Tanks And Basin, Water Filter, Vessels, Spoons, Plates, Cooker, Mugs, Jugs, Chairs, Bottle Holder, Stove, Plates, Tumblers, Knifes, Forks, Trays, Bucket, Water Tanks, Rods, Tea Kettle, Pots, Hot Boxes, Stand, Stool, Geyser Tank Of Sorts Sizes And Other Items Coming Under Steel Scrap With/without Attachment Of Ms And Others Items On As Is Where Is Condition Available Under The Custody Of Cdms 08 Ward Ap ( Magnate & Liquid Not Allowed). (loc: Bin No 131 At Scrap Yard )

Description: Total Qty. = 20 Mt, Description- Unserviceable Vital Scrap And Exc. Fitting Scrap (cbc, Yoke, Draft, Knuckle, Knuckle Pin, Front Follower, Yoke Pin, Bk Cylinder, Adapter, Lock, Knuckle Thrower, Bogie Sheet Etc.)(remark- Material To Be Sold On As Is Where Is Basis And Material Will Be Delivered In Weight.)

Description: Set Of Cab Side Window Glass Locking Assemblies For Wap7 & Wag9 Locomotives. A Set Consists Of 02 Subsets As Follows. 1) Cab Side Window Glass Locking Assembly (hole To Hole 68mm) As Per Drg No. Els/vskp/2018/12, Ref Nos.01 To 07, Qty = 01 Set As Per Drawing Attached, 2) Cab Side Window Glass Locking Assembly (hole To Hole 35mm) As Per Drg No. B/trs/g7/cab/3/21, Ref Nos. 01 To 09, Qty = 01 Set As Per Drawing Attached