Locker Tenders

Description: CATEGORY: End fittings (finish machined) as per TAPS-4/31120/2403/DD and Specification PB/E/00040, R0 , End Fitting Flange for Coolant Tube rolling, drawing no. TAPS-4/31120/2421/DD & PB/E/00040, R0 , EF spool-A, CS ring shrink fitting mockup, drawing no. TAPS-4/31120/2428/DD and TS no. PB/E/00040, , EF spool-B for CS ring shrink fitting mock-ups, drawing no. TAPS-4/31120/2428/DD & TS no. PB/E/00040 , EF spool-C for CS ring shrink fitting mock-ups, drawing no. TAPS- 4/31120/2428/DD & TS PB/E/00040, R0 , Lattice Tube for 16 channel Mock up as per drawing no. TAPS-3/31610/2507/DD and 2506/DD , Lattice tube 100mm long from 241.25 mm Dia End for weld qualification drg no. TAPS- 3/31610/2506&07/D , Liner Tube as per drawing no. TAPS- 4/31120/2402/DD and Specification PB/E/00041, R0 , Liner Tube Spacer (Button) as per drawing no. TAPS- 4/31120/2402/DD and Specification PB/E/00041, R0 , Liner Tube Spool for rolling qualification as per drawing no. TAPS- 4/31120/2424/DD and Specification , Liner Tube Flange for rolling qualification-drawing no. TAPS-4/31120/2423/DD & TS no. PB/E/00040, R0 , Journal Ring, Cal. Side (Tool Steel AISI-D-2) drawing no. TAPS-4/31150/2401/DD & TS PB/E/00042, R0 , Journal Ring, FM Side as per drawing no. TAPS-4/31150/2401/DD and Specification PB/E/00042, R0 , Bearing Sleeve FM side for 16 Ch. Mock up drg no. TAPS- 4/31150/2401/DD & TS no. PB/E/00042, R0 , Bearing Sleeve Cal. Side side for 16 Ch. Mock up drg no. TAPS- 4/31150/2401/DD & TS no. PB/E/00042, R0 , Bearing Sleeve Retainer ring FM side for 16 Ch Mock up drg no. TAPS- 4/31120/2414/DD & PB/E/00043, R0 , Bearing Sleeve Retainer ring Cal. Side for 16 Ch. Mock up drg no. TAPS- 4/31120/2414/D & PB/E/00043R0 , EF Retaining ring as per drawing no. TAPS-4/31120/2414/DD and Specification PB/E/00043, R0 , Split Sleeve Assy. (CS- IS: 2062GrA, Zn plated) drg no. TAPS-4/31120/2413/DD & TS no. PB/E/00044, R0 , Bellows attachment Ring (CS-A519 Gr1025) drg no. TAPS-4/31120/2409/DD & TS no. PB/E/00045, R0 , SS Seal Ring in Bellows 308L/321L as per drawing no. TAPS-4/31120/2409/DD & TS no. PB/E/00045, R0 , Yoke of Position Assy drg no. TAPS-4/31120/2407/DD and Specification PB/E/00046, R0 , Stud 17-4 PH M-30 x 2- 6g as per drawing no. TAPS-4/31120/2408/DD and Specification PB/E/00047, R0 , Unthreaded Fixing Block (Part no. 2) SS-193 (Yoke Assembly) as per drawing no. TAPS-4/31120/2410/DD , Unthreaded Fixing Block (Part no. 2A) SS-193 (Yoke Assembly) as per drawing no. TAPS- 4/31120/2410/DD , Threaded Block (Part no. 3) as per drawing no. TAPS-4/31120/2410/DD , Threaded Block (Part no. 3A) as per drawing no. TAPS-4/31120/2410/DD , Square head screw M-10 x 1.25-6g (850 x 4) as per drawing no. TAPS-4/31120/2410/DD , Hex. Main Nut (850 x 2) as per drawing no. TAPS-4/31120/2410/DD , Hex. Lock Nut as per drawing no. TAPS-4/31120/2410/DD , Spring Washer (B-10) as per drawing no. TAPS-4/31120/2410/DD , Spring Washer (B-30) as per drawing no. TAPS-4/31120/2410/DD , Hex Soc. Headed Cap Sc. M4 x 0.7 x 8lg as per drawing no. TAPS- 4/31120/2410/DD , Master gauge for Dimension (L-27, C-4, L-30, B-10, C-8) as per TS no. PB/E/00040, R0 , Working gauges for Dimension (L-27, C-4, L-30, B-19, C-8) as TS no. PB/E/00040, R0 , Landed Sleeve Insert (SS-410) for CT Rolling as per drawing no. TAPS-4/31610/2414/DD , CSTS Flanges (SS304L) for CT rolling as per drawing no. TAPS- 4/31610/2414/DD

Description: Locking Bolt For Flap Door Of Boxn, Boxnhs Wagon (washer 30mm Od, 18mm Id, 5mm Thickness With 6mm Dia Pin-41mm Long Should Be Supplied In Loose Condition) To Rdso Drg.no. Wd-90007-s-1, Item-15, Alt:21.

Description: Corroded And Rusty M.s Angle And Patra, Defective Door Locks, Head-broke Knuckle Pin, Clevis Pin, Fasteners, Pantograph Loose Parts, Pinion 3 Phase 20 Teeth, Pinion 3 Phase 21 Teeth, Hs Tm Pinion, Speed Prob. Housing, Brush Holder Sparing, Set Of Outer Bearing Cap-3 Phase Tm, Outer Labyrinth, Outer Deflector-hs, Nde End Frame-3 Phase, De End Frame-3 Phase, Hs Tm Bearing Bracket- Pe, Hs Tm Bearing Bracket-ce, Pe Bearing Cover- Hs Tm, Miscellaneous Parts Empty Damaged Barrels Of Big & Small & Empty Dpt Bottles (nut, Bolts, Bhrr Brackets, Liners, Bush, Assembly Parts, Rollers, Inspection Covers), Bearing Inner & Outer Racers, Brake Drums, Geared Wire Rope Drums, Wire Rope Pulleys, Motor End Shields, Gear Boxes, Brake Assemblies, Tank, Shafts, Foundation Base, Panel Doors, Chain Slings, Defective Radiator Stand, Defective Rps Rod, Emc Yoke, Armature, Core, Iron Part Of Epc Arc-chute, Mom Body, Nc-4 Valve Body, Hardware¿s Of Emc, Epc, Ctf/reversor, Mp,smgr Etc, Smgr Defective Cover, Epc Servomotor Spring & Piston, Ctf/reverser Contact Spring Fork, Released Liners, Bushes, Cotter Pins, Wire Rope, Cp Scrap, Cp Cylinder, Aux Motor End Shield, Cp Foundation Frame, Cp Heads, Cp Piston Rings, Aux Motor Ducts Tmb,mvsl,mvsi,dbr Empty Box, Impellers Of Aux Machines,3phase Jaali, Released Roof Sheets, Head Light Body, Headlight Reflector, Cfl Body, M.s Frame Door, Locker Iron, Cbc Loose Items, Scrapped Cattle Guard, Waste M.s Parts Removed Cabs, Iron & Steel Stools, Bend Scrap Cbc Operating Handle, M.s Rack, Chair Tubular Steel With Arm And Caned Back, Trolley 4 Wheel, Insulation Heater, Damaged Buffers, Etc. And Other Miscellaneous Release Items. (rubber Items, Non-ferrous And Other Attachment Will Not Be Delivered.) Cutting Permission Will Be Allowed For Major Part For Easy Loading. Remarks - Kachcha /pakka Approach Road Is Available Upto Lot. Lot Inspected On Visual Basis As It Is Not Possible To See Each & Every Pieces Of Lot Material For Detailed Check During Inspection. Lot Quantity Is Assessed Purely On Approximate Basis. Lot Number Is Displayed On The Board At The Lot. Segregation Is Not Allowed At The Time Of Delivery. Delivery Will Be Made On Actual Weighment Basis. Weighment Will Be Taken On Nearest Govt. Approved Weighbridge. Rubber Items, Non-ferrous Items Without Attachment, P.way Items, Battery, Brake Blocks, Drums & Ohe Structure Will Not Be Delivered At The Time Of Delivery. Delivery Will Be Made During All Seasons. If Any Addition, Deletion, Alteration & Variation Come In The Lot After Joint Inspection, Stock Holder Will Be Fully Responsible. Location - Near Cutting Yard Els/kyn. Qty - 60.000 Mts. Approx. Stock Holder - Sse (development) Els - Kyn.

Description: Pl No.98057054, Sc. Melting Gr.d Consisting Of Bolt And Nuts Different Section, M-16 Bolt, M-20 Long Bolt, M-20 Nuts, Sealing Coller, Retaining Steel Ring, Locking Plate, T-20 Washer, Iron Frame Cover, Security Disc And Plate, M-20 Axle Cap Screw And Broken Ferrous Scrap Of Icf/dm Roller Bearing Components In Sorts And Sizes. Please Check Special Condition And Detailed Conditions / Amendments / Modifications If Any In Depot Condition Before Bidding.

Description: Scrap Ferrous Cast Steel Consisting Of Various Types Of End Shields,bearing Caps,housing Bearing Casing, Bearing Sleeves, Bearing Locking Plates ,rings And Other Scrap Components Of Sorts And Sizes. Pl-98050060

Description: Heavy Duty Single Acting Screwed Ram With Lock Nut Spring Return Hydraulic Jack With Pump Capacity

Description: Mixed Scrap : Actual Lot No. 03122504 0738. Pl No.98050047 (15) (hsn Code 72044900-gst18% On Fcm Basis) Scrap Of Cond. & Unserviceable Mixed Scrap Of Ms, Cs, Ci, Gi, Ss Contains Pipes End Body Pcs. Horizontal Levers Hand Brake Wheels Angle And Channel Pcs, Rod Pcs Stands Valves Levers Bolts And Nuts Rivets Washers Pins Foot Steps Cut Bits Side Barer Housings Pipe Pcs Straps Liners Sheets Pipe Pcs Pins Throwers Locks Races Collars Axle Box Covers, Air Brake Pipes, Guard Seats, Ms End Body Pcs, Ms Sheets, Ms Cut Bits, Ms Rod Pcs, Sab Parts, Gi Wire, Ms Ladders, Ms Channels, Door Hangers, Tool Box, Ms Meshes, Bp Fp Hose Pipes, Knuckles, Crushed Paint Drums, Grease Seals, Yoke Support Plates, Yoke Pins, Sheet Strips, Ms Pipes And Pcs, Rubber Pads, Chairs, Roof Sheets, Grease Drum, Auxiliary Reservoirs, Cone Bearing, Hoop Iron. Wedges Hyd. Hoses Fabricating Scrap And Other Misc Items Of Wagons Sorts & Sizes Full Or Broken With Or Without Attachments Location: Road No.3&4 (single Cut Permitted For Loading Purpose Only) (note: 1. If Any Ss/ Corten Steel & Non-ferrous Items Found During Loading / Delivery Shall Be Return To The Railways By The Purchaser 2. In Case Of Clubbed Lots, Purchaser Has To Clear The Lots In The Sequence As Mentioned In The Lot Description And No Deviation Is Accepted. 3. No Picking And Choosing Of Material Is Permitted While Taking Delivery )

Description: Released Condemned Various Type M.s Fixture Of Led Luminaries, Boxes, Switchgear, (tpic, Dpic,sfu, Starte R,pannel,m.s Channel, Angle, Valve, Sheets, Chaire, Lockers, Rack, Trolly, Platform Scale, M.s Haxogonal Weight.total Lot Qty: 5.519 Mts Approx)

Description: Lot No. C/elst/m6/03/40, Srl No. (1) Desc.- Set Of Dampers For Wag-9 , Qty- 06 Sets , Srl No. (2) Desc.- Secondary Spring For Wag-9 , Qty- 08 Nos. , Srl No. (3) Desc.- Push-pull Rod (traction Bar) , Qty- 08 Nos. , Srl No. (4) Desc.- Yaw Damper Of Wag-9 , Qty- 13 Nos. , Srl No. (5) Desc.- Vertical Damper Of Wag-9 , Qty- 17 Nos. , Srl No. (6) Desc.- Sec. Horizontal Damper , Qty- 09 Nos. , Srl No. (7) Desc.- Housing For Traction Bar , Qty- 04 Nos. , Srl No. (8) Desc.- Ht Transition Cb Coupler , Qty- 01 Nos. , Srl No. (9) Desc.- Coupler Body For Tr Cbc , Qty- 16 Nos. , Srl No. (10) Desc.- Long Life Loco Side Buffer , Qty- 20 Nos. , Srl No. (11) Desc.- High Capacity Draft Gear , Qty- 14 Nos. , Srl No. (12) Desc.- Modified Striker Casting , Qty- 04 Nos. , Srl No. (13) Desc.- Cattle Guard For Wag-9 , Qty- 04 Nos. , Srl No. (14) Desc.- Draft Gear Elastomer Pad , Qty- 08 Nos. , Srl No. (15) Desc.- H Type Tight Lock Cbc , Qty- 04 Nos , Srl No. (16) Desc.- Knuckle , Qty- 76 Nos , Srl No. (17) Desc.- Clevis , Qty- 47 Nos , Srl No. (18) Desc.- Modified Transition Screw Coupling , Qty- 36 Nos. , Srl No. (19) Desc.- Knuckle Pivot Pin For H.t.cbc , Qty- 123 Nos , Srl No. (20) Desc.- Clevis Pin For H.t.cbc , Qty- 85 Nos , Srl No. (21) Desc.- Miscellaneous , Qty- 04 Drums, Approx. Total Ferrous Weight-20941 Kgs.

Description: Released, Condemned And U/s Ms Scrap Consisting {line Box, Senetisor Stand, Almirah, Pad Lock Etc}, Qty-750.00 Kg, Location- Loco Store Near Diesel Shed Dadn. Mode Of Delivery By Actual Weighment Basis And On As Is Where Is Basis, Custodian- Ctcc-dadn, Fdp-50 Days. Note- Cutting Permitted For Loadable Size Not Into Small Pieces On The Same Day Of Delivery.