Public Works Department Tender
View complete overview of Lakshadweep PWD Tender
Public Works Department - PWD Tender
Building Construction
Eprocure
Opening Date20 Jan 2025
Closing Date20 Feb 2025
Tender Amount₹ 84,20,71,793
Costs
EMD
₹ 94,20,718Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UTL_2887_1Tender No
NIT No.53/NIT/EE Kvt/2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.utl.gov.in/services.html
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil
689.92
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
5153.19
-
-
... More
Filling in plinth or trenches underfloors, foundations in areas etc with Red earth( from main land) in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge
1105.69
-
-
... More
Carriage of materials by mechanical transport including loading, unloading and stacking lead up to 5 km, including all lifts involved as directed by the Engineer-in-Charge. Surplus Excavated Earth
722.63
-
-
... More
Extra rates for quantities of earth works, executed: In or under water and/or liquid mud, including pumping out water as required
Note for item no. 2.24:- The extra percentage rate is applicable in respect of each item but limited to quantities of work executed in these difficult conditions. The unit, namely, metre depth, to be considered for payment, shall be the depth measured from the sub soil water level up to the centre of gravity of the qty executed in difficult conditions. The depth shall be reckoned correct to 0.10 m, 0.05 m or more shall be taken as 0.10 m and less than 0.05 m ignored
211.56
-
-
... More
Providing and applying Antitermite treatement by injecting chemical emulsion Imidacloprid emulsiable concentrate .075% for pre-constructional treatement and creating a chemical barrier as per IS 6313 (Part ll) 2001 for wall trenches, foundation, top surface of plinth filling, foundation of wall and floor, along the external perimeter of the building,etc. complete conforming to manufacturers specification and as directed by the Engineer-in-Charge.(Plinth area only to be measured for the payment ) (The above work shall be carriedout by an agency having sufficient experience and should ensure a warranty for a period of 10 years. Only skilled and experienced persons shall be employed for this purpose.)
3818.43
-
-
... More
Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). Depth exceeding 1.5 m but not exceeding 3 m
208.07
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
588.26
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
626.95
-
-
... More
Providing and Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
212.5
-
-
... More
Providing and laying autoclaved aerated cement blocks filling with 150mm/230mm/300 mm thick AAC blocks laying in sunken portion with approved block in cement mortar 1:4 ,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge
51.4
-
-
... More
Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. completeThe quantity will be calculated by multiplying the depth measured from the sub-soil water level up to centre of gravity of concrete under sub-soil water level with quantity of concrete in cum executed under sub-soil water. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored
29.72
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level. Concrete of M30 grade with minimum cement content of 350 kg /cum.
1460.74
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level. Concrete of M30 grade with minimum cement content of 350 kg /cum.
3079.73
-
-
... More
Extra for laying reinforced cement concrete in or under water and/ or liquid mud, including cost of pumping or bailing out water and removing slush etc., complete
The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity of the R.C.C. under subsoil water with the quantity of R.C.C. in cubic metre executed under subsoil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub - soil water
conditions.
127.18
-
-
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein
1589.16
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
189656.58
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
447644.18
-
-
... More
Providing fusion bonded Epoxy coating not less than 175 micron thickness and upto 300 micron to reinforcement bars of any diameter as per IS-13620-1993/ ASTM-775 M including repairs to cut ends,welded spouts and handling damages with reccomended liquid epoxy compatible with the coating and testing of coating at plant etc complete as directed by engineer ion charge.
637300.75
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
1357.75
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers
9877.24
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Columns, Pillars, Piers, Abutments, Posts and Struts
3639.99
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Stairs, (excluding landings) except spiral-staircases
627.57
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Weather shade, Chajjas, corbels etc., including edges
1649.9
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform
7887.3
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
640.62
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Edges of slabs and breaks in floors and walls. Under 20 cm wide
77.82
-
-
... More
Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
782.04
-
-
... More
Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
423.77
-
-
... More
Providing and laying solid block masonry 20cm thick using best quality blocks of available size in cement mortar 1:6 ( 1cement: 6 coarse sand )for walls at any area (including duct walls,fin walls skin / ledge wall ,kerb wall etc) . The rate including cost, conveyance and unloading at site and stacking of all materials, all labour, scaffolding, watering, curing etc complete as per the direction of Engineer in charge.
205.29
-
-
... More
Providing and laying solid block masonry 10cm thick using best quality blocks of available size in cement mortar 1:4 ( 1cement: 4 M. sand )for walls at any area (including duct walls,fin walls skin / ledge wall ,kerb wall etc) . The rate including cost, conveyance and unloading at site and stacking of all materials, all labour, scaffolding, watering, curing etc complete as per the direction of Engineer in charge.
111.24
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)
50
-
-
... More
Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
26.58
-
-
... More
Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level. Cement mortar 1:6 (1 cement : 6 coarse sand)
334.14
-
-
... More
Providing and laying half block masonry with factory made Precast concrete solid blocks of 100 mm thickness of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level: Cement mortar 1:4 (1 cement : 4 coarse sand)
160.14
-
-
... More
Providing material and labour for laying 18 to 20 mm Mirror Polished Kota stone of approved quality, selected and sorted for uniform color & texture, in internal/external flooring work. .Kota stone is to be laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing completed with bedding of average 25 mm thickness cement mortar in 1:4 (1 cement : 4 coarse sand).
5091.44
-
-
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
3041.92
-
-
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size.Size of Tile 600 x 600 mm.
320.54
-
-
... More
Providing and laying fully Vitrified matt tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in dadoing, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sq.m including grouting/filling the joint with white cement & matching pigments,cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge Size of Tile600x600 mm
6867.04
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 sqm
143.69
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
86
-
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
583.43
-
-
... More
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
100
-
-
... More
Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of: (a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. (b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge. (c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand
a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in
the centre of the panel which is placed on four steel blocks. The panel will withstand
and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load
of 50kg all complete as per the approved manufacturers specification and as per
the direction of Engineer-in-charge. All specification must be printed on the side of
the panel to ensure the quality of the product. 300 mm Finished Floor Height (FFH)
7.99
-
-
... More
Providing and Fixing, uPVC factory-made, white colour casement Louvers made of extruded profiles. Profiles of frames and sash will be mitred cut and fusion-welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangements for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be included in the required profile, the frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete as per direction of Engineer-in-charge. The Rates inclusive of 6mm Glazing, Louvers, Locks, hardware hinges, handle and fitting etc.
37.8
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular sections/ appropriate Z
sections and other sections of approved make conforming to IS: 733 and IS:
1285, fixing with dash fasteners of required dia and size, including necessary
filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners if required to be paid for separately) :For fixed portion.Powder coated aluminium (minimum thickness of powder coating 50 micron)
1586.04
-
-
... More
Providing and fixing 12 mm thick toughened fixed glass panel of approved brand and manufacture, including making necessary arrangements for fixing required fittings, all complete as per direction of Engineer-in-charge
105.7
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
62
-
-
... More
Providing and fixing factory-made single extruded GRP (Glass Reinforced Plastic) solid door/window/clerestory windows & other frames/chowkhat, comprising of high-quality GRP material with an antibacterial finish and honeycomb structure for superior strength and durability. The frames shall be fabricated with miter joints, assembled using GRP adhesive and stainless steel (SS) full-threaded star-headed screws.
The frame shall have a minimum density of 750 kg/m³, a compressive strength of 58 N/mm², and a modulus of elasticity of 900 N/mm². It shall also be termite-proof, borer-proof, water/moisture-proof, fire-retardant (Class A resistance to flame spread), and non-corrosive. The material shall comply with all relevant IS standards and be designed for long-term use in demanding environments such as hospitals.
The frames shall be fixed in position using M.S. holdfasts/lugs or SS dash fasteners of the required diameter and length, ensuring proper alignment and stability. The installation shall be completed as per the design and direction of the Engineer-in-Charge.
Note: For GRP solid frames, a minus tolerance of 5 mm in dimensions (depth and width) shall be acceptable. Variations on the plus side shall be acceptable; however, no extra payment shall be made for such variations. Frame size: 65 x 150 mm.
1552
-
-
... More
Providing and fixing factory-made single extruded GRP (Glass Reinforced Plastic) solid plain flush door shutter of required size, comprising high-quality GRP material with an antibacterial finish and a honeycomb core structure for enhanced strength and durability. The door shutter shall have a minimum density of 650 kg/m³, a screw withdrawal strength of 1800 N (Face) & 900 N (Edge), a minimum compressive strength of 50 N/mm², a modulus of elasticity of 850 N/mm², and a Class A resistance to the spread of flame.
The door shall be termite-proof, borer-proof, water/moisture-proof, fire-retardant, and resistant to microbial growth, making it ideal for hygienic environments such as hospitals. The surface shall be smooth, non-porous, and designed for easy cleaning and maintenance.
The door shutter shall be fixed with stainless steel butt hinges of the required size using full-body threaded, star-headed, countersunk stainless steel screws, ensuring secure installation and smooth operation. All work shall be carried out as per the direction of the Engineer-in-Charge.
Note: Stainless steel butt hinges and necessary screws shall be paid for separately. Thickness: 35 mm.
678
-
-
... More
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured):Rectangular or square
49.68
-
-
... More
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc, Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.
195.48
-
-
... More
Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with/without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:-Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: (i) Sites with basic wind speed 45 m/sec as per IS 875- Part 3 (ii) Sites with structure height more than 20m for all wind speeds
Three track three panel sliding window with aluminium channel for roller track, wool pile, nylon rollers with SS 304 body Using R2 series with frame (70mm & above) x (40mm & above) & sash (25mm & above) x (55mm & above) with zinc alloy (zamak) powdercoated handle on every panel with multipoint locking system (Height upto 1.8 metre).
-
-
-
... More
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc, Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.
99.72
-
-
... More
Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with/without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:-Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: (i) Sites with basic wind speed 45 m/sec as per IS 875- Part 3 (ii) Sites with structure height more than 20m for all wind speeds
Two track two panel sliding window with aluminium channel for roller track, wool pile, nylon rollers with SS 304 body Using R3 series with frame (55mm & above) x (40mm & above) & sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powdercoated handle on every panel with multipoint locking system (Height upto 1.8 metre).
-
-
-
... More
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc, Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.
-
-
-
... More
Two track two panel sliding door with aluminium channel for roller track,wool pile , zinc alloy (zamak) powder coated handle on every along multi- point locking system adjustable nylon rollers with SS 304 body. Using R3 series with frame (55mm & above) x (40mm & above) & sash (30mm & above )x (74mm & above)(Height upto 2.5m)
140.88
-
-
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40
mm thick :Float glass panes. 4 mm thick glass pane (weight not less than 10kg/sqm).
8.24
-
-
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40
mm thick :Float glass panes. 5 mm thick glass pane (weight not less than 10kg/sqm).
445.04
-
-
... More
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc, Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.
-
-
-
... More
Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with/without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:-Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: (i) Sites with basic wind speed 45 m/sec as per IS 875- Part 3 (ii) Sites with structure height more than 20m for all wind speeds
Fixed window/ventilator with mullion / transom Using R3 series with frame (55mm & above) x (45mm & above) (Height upto 2.5 metre).
10.35
-
-
... More
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
10.36
-
-
... More
Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c, including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and asper direction of Engineer-in-charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm.
72.71
-
-
... More
Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded).
209.15
-
-
... More
Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all
complete.
10
-
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
194
-
-
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
190
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm
260
-
-
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.
256
-
-
... More
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :100X58X1.90 mm
768
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
3919.73
-
-
... More
Supply and Installation of Handles for Glass Door of Stainless Steel Satin Finish, SS 304 Back To Back Pull Handles Dia. 25 mm,CTC Length 300 mm all complete, as per approved drawing and as directed by engineer in charge.
36
-
-
... More
Supplying And Fixing Glass to Glass Hook Lock of Dorma make WG-300G-G/G-PC45-NI-DCSSS series or equivalent for Frameless glass double door with 60mm EPC - both side key , all complete as per approved drawings and as directed by engineer in charge.
18
-
-
... More
Supplying And Fixing a pair of fire rated Solid SS Lever Handle and Mortise Lock case with Cylinder of approved size and quality for 2 hr fire rated steel doors etc complete all works including all required fixtures as directed by Engineer in Charge.
48
-
-
... More
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
86.45
-
-
... More
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
42.36
-
-
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm
28
-
-
... More
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
14
-
-
... More
Providing and fixing an SS sliding mosquito net for windows and doors involves custom-measuring the window or door, sourcing durable stainless steel mesh, and installing a sturdy frame with sliding tracks. The mesh size is of 18 x 16 OPI (openings per inch, 18 openings per inch horizontally and 16 openings per inch vertically). The net is securely attached, and the sliding mechanism is set up for smooth operation. Professionals ensure a perfect fit, easy sliding, and long-lasting protection against mosquitoes, offering a practical, rust-resistant solution for homes and businesses.
295.2
-
-
... More
Providing and fixing a 40mm thick lead-lined flush door shutter with vinyl covering, including a 2mm thick lead sheet for radiation shielding and vinyl finish on both sides. The door shall be installed with a 65x100mm hardwood frame and shall include all necessary fittings and accessories, such as hinges, locks, door closer, handles, and screws, ensuring proper installation all complete as directed by Engineer in Charge.
14.88
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
1239.54
-
-
... More
Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.
3508.21
-
-
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @0.70 kg per sqm
781.93
-
-
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm.
513.52
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
26532.09
-
-
... More
Providing and fixing stainless steel(grade 316) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
5213.1
-
-
... More
12mm cement plaster of mix 1:4 (1 cement : 4 fine sand) including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels - Internal plastering
16213.6
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix : : 1:4 (1 cement: 4 fine sand)
8261.65
-
-
... More
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
2056.84
-
-
... More
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
1958.67
-
-
... More
12 mm cement plaster finished with a floating coat of neat cement of mix :1: 3 (1 cement: 3 fine sand) including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. -
1090.73
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
2071.05
-
-
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
19370.64
-
-
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats
18270.45
-
-
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
196.31
-
-
... More
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
5994.3
-
-
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Alumini um sheets (each0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places
50
-
-
... More
Curtain glazing-Design, Supply installation, fixing and testing curtain glazing system at all heights consisting of powder coated aluminium frame and glass of approved make, aluminium frame work fabricated out of heavy duty Aluminium extruded profile, powder coated with durable thermosetting polyester powder coating by electrostatic spraying and hard stoved to not less than 60-micron thickness to comply with BS 6496:1994 (1991) and AAMA 2603-98 standard as per approved metallic shade. All aluminium members and profile shall be of AC-25grade as specified. Mullions & Transoms, extruded aluminium sections shall be of 6063-T6 alloy to be decided as per structural calculations. The aluminium members shall be protected with protections tapes all around the profile for safety against external scratches at site. (Protection tape shall be removed only at the time of handing over as per the instructions of Engineer In Charge).
The anchoring /bracing of the Al. sections to the RCC slabs /beams /columns/block masonry shall be done with required number of non-corrosive galvanized extended brackets of approved design (Galvanizing to be done conforming to IS: 4759-1996 up to 610 gms per SqM, 80-90 microns thickness) with approved dash fasteners of minimum 12mm dia and depth of minimum 100mm, in the concrete/ stainless steel bolts including providing and fixing aluminium shims of various thickness to adjust the beam level and line variation. The anchoring system should be designed to withstand the dead load of structural wall as well as stresses due to wind pressure as per IS code 875-Part III. (MS frame work to be provided wherever required will be measured separately for payment).(The detailed structural design calculations & shop drawings both vetted by IIT shall be provided by the executing agency and mock-up based on approved design has to be approved by Engineer In Charge before start of work.)
-
-
-
... More
The glazing subframe shall be aligned for each vertical mullion of size 50 mm x 180 mm for the entire height and for each transom of size 50 mm x 75 mm for the entire width horizontally by laser beam equipment to ensure 100% x axis and y axis alignment. To make the joint water and air tight, the glazing sub frame work is provided with approved in built ventilation and drainage system. All the joints of the structural glazing system and the periphery of glass shall be properly sealed with specified weather silicon. The details of inbuilt ventilation and drainage system should be submitted by the contractor before execution. Heavy duty, best quality EPDM gasket of approved colour of suitable profile is provided at joints and connections between. The glass is to be fixed at the outer side of the aluminium subframe with structural silicon sealant of approved make & colour (the structural silicone bite size shall not be less than 6 mm as per the structural design calculation or requirement/as per manufacturers recommendation).All screws, washers, Bolts, Nuts and Anchors used shall be only stainless steel of 316 grade etc. complete as per direction of Engineer in Charge. Curtain wall should be sealed to hoist structure and allow movements, ensure water tight and water proof etc. in its service life. Item includes cost of design, supply, installation, fixing aluminium frame with structural members, mullions, transom, sub frame, fixtures etc, including glass as specified below, cost of sealants, brackets, fasteners, screws, sleeve, spacer tape, backer rod, bolts, gasket, scaffolding, transportation, all taxes etc. complete in all respect and as directed by engineer in charge for the following items. Etc. (The above work shall be carried out by an agency having sufficient experience and should ensure a warranty for a period of 10 years. Only skilled and experience persons shall be employed for this purpose).Glass - 6 mm thk performance Glass. High performance glass U value less than or equal to 5.6+-0.1 Watt/m2k, SF-0.47+-0.02,SC -0.54+-0.2,VLT43%, External reflection11%, Internal reflection18% etc.Provide Horizontal and vertical Aluminium Capping 50 mm x 100 mm in line with tender drawings, all visible surfaces shall have high Durability (Akzonobel) / Super durable (Jotun) Powder coating of 60 - 80 micron confirming. The non visible aluminium surfaces shall have minimum chromatizing treatment.
257.7
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
9579.5
-
-
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work
728.39
-
-
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
35
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
55
-
-
... More
Providing and Fixing of Building signages as per following specifications - Sign to be made shall be made of 3 mm aluminium / Acrylic Box Letters (100mm thick letters). Sign Face shall be in 3mm 0/40 Translucent Acrylic with Male / 10mm Water Proof Sun board Female Joint Adequate LED of Samsung Make shall be fitted with the required wiring & Waterproof Transformer to have the uniform Light. A provision for Weather Proof Box shall be made to keep the Transformers. The signages to be fixed on the structural ACP + MS framework with required sizes as per the design. The item includes design of supporting arrangement, fabrication, installation and commissioning the signages with structural framing including channels, angles, gusset plates and anchoring the frame by anchor fasteners to the Building. The structural framing should be painted with primer and enamel paints
7.5
-
-
... More
Frosted Film - Supply & laying of Frost/Privacy Film appoved design and color for All Glass Partitions and GLass doors. Rate including laying. (The successful vendor should submit 10 years Warranty certicate to the clients. Product to be certified by Manufacturer's Representative)
105.7
-
-
... More
Egress fire exit Signage- Ceiling recess mounted -Supply & fixing of LED unit fixed on ceiling which is lit internally.The LED is prolite make). Sleek exit/Egress edgelit lights recess mounted as pproved by the architect. Signage to have UPS back up in built.Fixed on to the existing background with necessary chains & hooks
13.5
-
-
... More
Room/Function identification holders signs made of imported clear acrylic of size 5mm thickness . The room location will be made 0.8mm raised computer cut with 16mm high. Signage will be painted with DuPont paint as per approved shade card.
18.9
-
-
... More
Room/Function identification holders signs made of 3mm thick SS fixed on 3mm thk foam board with double sided tape. The room location will be made 0.8mm raised computer cut with 16mm high. Signage will be painted with DuPont paint as per approved shade card.
18.9
-
-
... More
Providing control joints in 6mm Width x 10 mm depth at 3m X 4m panels along the length and breadth of the entire screed area. The joint can be provided by using a saw cutting machine attached with a 3 mm blade within 18-24 hrs of application of the screed. 28- 30 days later, these joints can be filled with one-part moisture-curing Polyurethane Sealant.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.
1619.87
-
-
... More
Grading roof for water proofing treatment with Cement concrete 1:2:4
333.44
-
-
... More
Providing and Fixing Polycarbonate Plain Sheet involves supplying 4mm thick polycarbonate sheets, as approved by the Engineer, in a single length of 12 meters (or as per the Engineer's decision). These sheets will be installed using required aluminium beadings,sealants, self-drilling/self-tapping screws (5.5x55mm) with EPDM seals, and can be fixed on horizontal, vertical, or curved surfaces, excluding cost of purlins, rafters, and trusses. The installation includes cutting the sheets to required sizes and shapes and must comply with ISI mark standards for quality.
440.44
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x0.90 mm M.S. laths with 0.90 mm thick top cover
7.68
-
-
... More
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured).
7.68
-
-
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
76.77
-
-
... More
Providing and fixing Gysum false ceiling (12.5 mm) at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks)
1195.79
-
-
... More
Providing & fixing 8 mm thick Calcium Silicate false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process.
346.15
-
-
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level,suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyesterpaint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
4783.16
-
-
... More
Providing and fixing of Ceiling pelmet for curtains, made in plywood and Gysum ceiling with paint finish at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks) As per design approved by Architects.
9.8
-
-
... More
Providing and fixing 450mm wide Pantry unit made with 710 grade prelaminated plywood in approved wooden laminate shade on shutters and all visible areas. Best quality telescopic sliders,hinges,locks,hardware to be provided. (HETTICH/DORMA/HAFELE OR EQ) as per drawing and 3D.counter top laid with steel grey granite with bullnose rounded edge .
24.36
-
-
... More
Providing & fixing TV unit ledge of 30mm thick with back panelling in lobby made with 16mm plywood box work with all visisble area in laminate finish 1MM MERRINO 10510 MAGUS WALNUT BRONZE and 3mm groove at 60cm intervals as per 3D and drawing.
5.04
-
-
... More
Providing ,supplying & fitting of vanity counters/ wash basin counters with cabinets of carcase with 19mm tk BWP 710 grade plywood with laminate finish &wooden edge band,16mm tk BWP 710grade pywood shutters with self closing hinges. counter top with granite or fullbody tile laid over 8 mm thick multiwood board, with cement based high polymer modified quick set adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete all as directed by the Architect.Extra for providing opening of required size & shape for wash basin, vanity counter and similar location in granite or fullbody tile ,including necessary holes for pillar taps etc.Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. on complete steel work
41.45
-
-
... More
Providing & supplying of Mirror fixing in toilet, above Toilet wash counter to provide 6mm edge polished mirror SAINT GOBAIN or equivalent fixed with mirror stud.
37.4
-
-
... More
Providing and fixing wardrobes and cabinet with 16mm thick Marine plywood box work with inside area approved 1 mm thick frosty white laminate, shutter with 19mm Plywood with 1mm thick GREENLAM 930 SGL GLISTEN on all visible areas. Best quality telescopic sliders,hinges,locks,hardware to be provided. (HETTICH/DORMA/HAFELE OR EQ) as per drawing and 3D
176.56
-
-
... More
Providing and fixing registration,pharmacy and admin counters with 16mm and 12mm thick marine plywood with approved shade 1mm thick laminate ( GREENLAM GLISTEN 930SGL) on all visible areas. Internal laminate finish in white. Table to have CPU stand,key board tray, wire manager, footrest, 3 drawers with multi latch locks,telescopic sliders and all required soft close hardware. Top covered with 19mm edge bullnose Black granite as per drawing.
67.11
-
-
... More
Providing & fixing 2 seater sofa with dimension -1800 mm Width x 950 mm Depth x 950 mm Height.Frame shall be made of combination of 12 mm moisture resistance and termite free plywood and pine wood (without knot)having cross section 34x64mm.Seat - shall be made of slab stock foam of density of base 28 kg/ meter cube and super soft 32 kg/meter cube at top. Seatshall be embeded with 2mm pocket spring.Seat Back - made of slab stock foam of density 28 kg/ meter cube pasted on back. Front of the back rest shall be made ofloose conjugated polyester fiber webbing.Legs - legs shall be made of rubber wood.Facia - facia of the sofa shall be made of membrane pressed MDF.
6
-
-
... More
Providing & placing three seater waiting chair. CROSS BEAM: It should be made up of black powder coated rectangularM.S.ERW tube having 8.0 ± 0.03 cm x 4.0 ± 0.03 cm x 0.2 ± 0.014 cm size.LEG AND ARMREST: It should be chrome plated made of cold rolled steel with 0.12 ± 0.013 cm thinkness.SEAT/BACK SHELL: It should be powder-coated perforated shell made from cold rolled M.S. sheet.The Side Bar should be made of Chrome plated solid steel 3.0 ± 0.03 cm x 1.2 ± 0.3 cm with fluting and plastic inserts. The Shell should be assembled on the Cross Beam with help of M8 Bolts .Overall Dimensions:Seat Height - 40.0cm, Height - 67.5 cm, Width & Depth of Chair as - Width-163.0cm and Depth-57.0 cm
81
-
-
... More
Supplying of Fourseater waiting chair. 4 seater perforated metal bench -Cross beam and Leg shall be powder coated made of cold rolled steelwith 0.2 ± 0.01 cm thickness. Seat-Back shell shall be 1.2 mm thk powder-coated perforated shell made from cold rolled M.S. sheet 0.12 ± 0.013 cm thickness. The Side Bar shall be made of powdercoated solid steel with in serts. The Shell shall be assembled on the Cross Beam with help of bolts . Seat width- 54.5 cm per seat. Thickness of side bars is 4.5cm & gap between seats is 2cm. Overall Dimensions shall be Seat Height - 40.6 cm, Height - 77.5cm, Width & Depth of Chair as measured from ground - Width-176.5 cm and Depth-71 cm.Dimensions tolerance / variations shall be within +/- 1 cm.
46
-
-
... More
Providing and fixing conference table of size 3500 mm width x 1200 mm depth. Legs shall be made from 25 mm PPB having a straight profile with half round edges and clad with 0.6 mm thick post forming laminat. Overall thickness of leg shall be 26.2 mm.Modesty panel of understructure shall be made of 18 mm thick Pre laminated Twin Board.
1
-
-
... More
Providing & fixing conference and admin chair. SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ± 0.1cm. thick hotpressed plywood and upholstered with leather and moulded Polyurethane Foam. The back foam should be designed withcontoured lumber support for extra comfort. BACK SIZE: 53.0cm.(W) X 95.4cm.(H) SEAT SIZE: 54.6cm.(W) X 49.0cm.(D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HRpolyurethane foam should be moulded with density = 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgf for 25% compression.SEAT-BACK CONNECTING SPINE:The seat and back should be arrested together with spine made of 0.8 ±0.05 cm thkHR Steel and should be black powder-coated ( DFT 40-60 microns ).ARMREST ASSY: The armrest assy. should comprise of three parts viz. the armrest support tube and P.U. armrest and thearmrest top. The armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm M.S. E.R.W. support tubes andChrome plated. The P.U. armrest should be made of black integral skin polyurethane with 50-70 shore 'A' Hardness andreinforced with M.S. insert. The armrest top should be made of ABS & upholstered with foam & leather. FRONT PIVOT SYNCHRO TILT MECH.: The mechanism should be designed with the following features:•360° revolving type.•Seat back tilting ratio of 1 : 1.5•Front pivot for tilt with feet resting on ground ensuring more comfort.•Tilt tension adjustment.•5-position locking with anti-shock back mechanism, which prevents the backrest from impacting the user when the lockshould be released.•Static seat depth adjustment = 5.0 ± 0.5cm with 5 position locking.PNEUMATIC HEIGHT ADJUSTMENT: it has an adjustment stroke of 9.0 ± 0.3cm.BLOW MOULDED BELLOW : The bellow should be 1 piece and blow moulded in black Polypropylene.PEDESTAL ASSY: The pedestal should be made of die-cast aluminium with buffing finish. It should be fitted with 5nos. twinwheel castor. The pedestal should be 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors).TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black Nylon.
44
-
-
... More
Providing & fixing examination chair. SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm, thick hotpressed plywood, upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foamshould be designed with contoured lumbar support for extra comfort.POLYURETHANE FOAM: The polyurethane foam should be moulded with density = 45 ±2 kg/m' and Hardness = 20 ±2 onHampden machine at 25% compression.TUBULAR FRAME: The tubular frame should be cantilever type & made of 0 2.54 ±0.03cm. x 0.2 +0.016cm. M.S. E.R.W.tube and black powder coated ( DFT 40-60 microns ).The Armrest Tube of 0 2.54 +0.03cm. x 0.2 ±0.016cm. M.S. E.R.W.tube should be welded to mainframe. The desklet should be fitted on the right hand side.DESKLET ASSEMBLY: The wooden desklet should be made of 1.8 ±0.05cm. thk. pre-laminated particleboard with 0.15±0.03cm. thk. P.V.0 lipping all around.ARMRESTS: The one-piece armrests should be made of black integral skin polyurethane foam with 50-70 Shore hardnessand reinforced with M.S. insert. The armrests should be scratch and weather resistant tant.PAPER TRAY: The paper tray should be made of 0 0.4 +01-0.005cm. M.S. wire spot welded to form a mesh. It should beblack powder coated.
10
-
-
... More
Providing and fixing Nurses station Table with 16mm and 12 mm thick marine plywood with 1mm thick Laminate finish (GREENLAM 930 SGL GLISTEN) on visible areas. Bottom portion covered in Wooden laminate shade (MERRINO-10510 MAGUS WALNUT BRONZE) and steel skirting as per 3D image and drawing. Top and sides covered with 12mm CORIAN (LG- HI-MACS W007 LENTIL) eased edge. Internal finish with laminate in 0.8mm Frosty white matt as per drawing and 3D images.
33.66
-
-
... More
Providing & fixing consultation table with written of 1500x750 mm H. Primary Work Surface shall be Made of25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to topSoft closing access flap with in-build power box are provided on work surface for wire management.Secondary Work Surface of the green guard by ul certified table shall be made of 25mm thick MDF one side pre-laminateboard confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVCmembrane pressed on to top. There shall be a desk pad of width 800 mm and depth 430 mm made of 1 mm thich artificialleather glued on 1.2 mm thick GI sheet a per IS 277.Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS12823:1990, Edge banded with matching 2 mm thick PVC lipping.Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS12823:1990, Edge banded with matching 2 mm thick PVC lipping.Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Usespowder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Pedestals are provided with lock for security.
23
-
-
... More
Providing and supplying High back chair. SEAT/BACK A SSEMBLY: The seat is made up of 1.2 + 0.1cm thk. hot pressed plywoodmeasured as per QA method described in OCP-QLTA-PL14-18.The Back is made up of injection mou1ded glass filled nylon& upholstered using Mesh fabric with high tenacity yarn.HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m°and hardness 16 + 2 kgf as per IS:7888 for 25% compression.ARMRESTS : The adjustable armrest is designed with Up-Down adjustment— 8 steps (8 0+0.Scm range) Height adjustable armrest structure which is Powder Coated & fitted with an armrest top. Fixed Armrest Top is PU moulded over metal insert.LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam &covered with polyester fabric.The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rearside of the pa6. Lumbar pad has an adjustment of 8.0 + 0.5 cm in height.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designedwith the following features. 360° revolving type.Single point control. Front-pivot for tilt with feet resting on ground ensuring more comfort. Tilt tension adjustment.4-position locking with anti-shock feature.Seat/back tilting ratio of 1:2.NECKREST : The Neckrest assembly consist of polypropylene pad with moulded polyurethane foam & covered withpolyester fabric Neckrest is fixed to Back Assembly through Neckrest connector Neckrest assembly has height adjustment.
107
-
-
... More
Providing and fixing visitors chair,The seat and back are made of injection moulded high impact strenght polypropylene polymer compound with indoor grade UV Resistance.The tubular weled frame is made from Dia2.22 +/- 0.03cmx 0.12+/- 0.0128 cm and 3.5+/- 0.03 cm x 0.12+/-0.0128 cm stainless Steel 202 grade tube.The tube of green guard by ul certified chair shall be buffed polished to give shinyfinish. The Shoes are made of high impact strenght polypropylene polymer compond with indoor grad UV Resistance andpressed fitted with tubularfram.
6
-
-
... More
Supply & fixing of patients Steel Stools with cushions, size 21"ht 14" dia cushion fabric top and stool legs of 1" dia SS tube
86
-
-
... More
Providing & fixing dinning table of 90cm dia 3 Seater,made up of plywood confirming to IS 710 with PU Coating . The table top shall be provided with 1 mm thk laminate.Legs are made up of harwood/Ashwood. All exposed faces finished with PU polish for wood frames .
2
-
-
... More
Providing & fixing Study table with prelaminated plywood confirming IS 710 grade 16mm ,with 1mm thick laminated fixing on drawer shutters and all visible areas.Best quality accessories and telescopic sliders for drawers to be used(HETTICH/DORMA OR EQ) (TABLE SIZE: 900MMX50MMX75MM, DRAWER SIZE: 300MMX150MM[H])
9
-
-
... More
Providing and fixing of linear workstation Table top 1200x600x750mm of 25mm thick Pre-laminate particle board E1 norms finished with 2mm pvc edge banding on all expossed edges.Under-structure : Supported on MS powdercoated CONNECT leg with supporting beams.Wire management : 65mm Dia grommet and Below Table Top 250 mm ht laminate fascia.Raceway &separator for power & data cable management. MS vertical cover for wire entry.
8.1
-
-
... More
Providing & supplying Bystander Cot made with hardwood frame work and plywood box work covered with laminate of approved shade.Head Board made with 12mm plywood fixing at 16mm plywood box work with laminate in approved color on all visible areas. Accessories and hardware,6 inches foam/coir mattress of approved brand (customised dimension to fit cot) to be provided as per approved architects drawing.
17
-
-
... More
Providing, supplying & fixing of dining chairs,frame & legs are made up of Ashwood having matching finish or walnut finish ploish.Upholstery works were provided with High-resilience polyfoam seat cushions with 50m density wrapped in high end soft fabric of Italian leather.All exposed faces finished with PU polish for wood frames.
124
-
-
... More
Supply & fixing Single seater sofa of 80x65 x 68 cm with Frame structure madeAshwood frame work wit canes and legs are made up of ashwood.Upholstery works were provided with High-resilience polyfoam seat cushions with 50m density and having walnut finish ploish.All exposed faces finished with PU polish for wood frames .
18
-
-
... More
Providing & fixing Teapoy of 900x600mm and Glass should be 12 ±0.3 mm toughened glass uv glued with bushes made in ss 202 grade for fixing with under structure. it should be a welded assembly made in ss202 grade having dia 12mm.
16
-
-
... More
Providing & fixing Teapoy of 750x400mm and Glass should be 12 ±0.3 mm toughened glass uv glued with bushes made in ss 202 grade for fixing with under structure. it should be a welded assembly made in ss202 grade having dia 12mm.
2
-
-
... More
Providing & fixing Teapoy of 450mm dia and Glass should be 12 ±0.3 mm toughened glass uv glued with bushes made in ss 202 grade for fixing with under structure. it should be a welded assembly made in ss202 grade having dia 12mm.
2
-
-
... More
Providing & fixing Teapoy of 500mm dia and Glass should be 12 ±0.3 mm toughened glass uv glued with bushes made in ss 202 grade for fixing with under structure. it should be a welded assembly made in ss202 grade having dia 12mm.
2
-
-
... More
Providing & fixing Teapoy of 900mm dia and Glass should be 12 ±0.3 mm toughened glass uv glued with bushes made in ss 202 grade for fixing with under structure. it should be a welded assembly made in ss202 grade having dia 12mm.
6
-
-
... More
Providing & fixing table with prelaminated plywood confirming IS 710 grade 16mm ,with 1mm thick laminated fixing on drawer shutters and all visible areas.Best quality accessories and telescopic sliders for drawers to be used(HETTICH/DORMA OR EQ) (TABLE SIZE: 1500MMX75MMX75MM, DRAWER SIZE: 300MMX150MM[H])
5
-
-
... More
Supply and installation of a dining table in outdoor dining area with an aluminium frame, powder-coated for enhanced durability and corrosion resistance. The frame should be woven with high-quality synthetic wicker, providing an attractive, durable, and low-maintenance finish. The table should feature a toughened glass top, tempered for additional strength and safety. The dimensions of the table are as follows: Width 200 cm, Depth 100 cm, and Height 75 cm.The quoted rate shall include the cost of all materials and labours, tools and tackles etc complete and as per directions of Engineer-in-charge.
25
-
-
... More
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.8mm thick.Granite of any colour and shade
1010.61
-
-
... More
Providing and fixing of wall panelling with 19 mm thick BWP 710 fire retardant plywood conforming to IS: 5509 /10701 grade internal frame work and 12 mm thick fire retardant plywood conforming to IS: 5509 /10701 grade . Exposed area finishing with 12 mm thk. BWP 710 fire retardant plywood conforming to IS: 5509 /10701 grade with veneer-A grade finish and one coat of PU coat and flexiply with veneer covering combination, with SS Gold finish profile 20mm, with all necessary fittings and labour charges, as per design approved by Architects.
24
-
-
... More
Providing and installation of Acoustic wall panelling with 12mm pet panels of size: 1220x2440 of weight 1800 g/m2, which are 50 % recyclable material has LEED MR-4, having NRC value upto 0.8 and 15 mm Wood Fiber of size: 600x1200mm of density 410 kg/m3, with Green (VoC,RC%)-Low 10, having NRC value upto 0.9,with polyester fibre infill of 500GSM. Fixed with GI struts of Web Width 48mm, depth 48mm, 0.6mm thickness are used to form frame from ceiling to floor of CC – 600mm framing on both the planar sides from (Vertical & Horizontal). Above this framing, one side first layer will be gypsum board of 12mm thick and second layer will be 15 mm wood wool board and another side will two layer of 12 mm thick gypsum board of approved make. Wood wool boards, pet panels and gypsum boards are installed using black phosphate or nickel pated bugle head fine threaded screws horizontally or vertically as per the architecture design and infill is used to fill the gap between the frames. The rates for above works are inclusive of all cost materials incluidng fabric, fabrication charges, transportation and installation, labour, etc complete, as per design approved by Architects.
81.87
-
-
... More
Providing and fixing of wallpaper with paper backing with 220-250 GSM. The wallpapers are printed on either low VOC, or PVC-free LEED-certified substrates- either of which are intended for a range of commericial applications. These are fixed with Bartoline or equivalent-all purpose wallpaper adhesive with high quality and which is easy to mix. As per design approved by Architects.
100
-
-
... More
Finishing walls with textured interior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm
20
-
-
... More
Supplying and installation of Black out roman blinds as per the detailed Technical specification and deatiled drawing. Including all fixing charges and necessary fittings. Base rate of fabric is Rs. 700/-
99.18
-
-
... More
Supplying and installation of Black out roller blinds as per the detailed Technical specification and deatiled drawing. Including all fixing charges and necessary fittings. Base rate of fabric is Rs. 700/-
99.18
-
-
... More
Supplying and fixing of Main curtain (Size:345X220 cm), with polyester based cotton blend pleated curtains. Including all fixing charges and necessary fittings.
304.92
-
-
... More
Providing and fixing Cubicle curtains made by 2400 square inch treads,100% Polyester Fabric,Fungus Retardent, Water repellant,Stain retardent,and easy washable.Curtains gsm 175to180 gsm.
616
-
-
... More
Providing and fixing CubicleTracks made of AlluminumAlloy of Box size 1.7x20x25mm with 50-60 microns powder coating in white color.Tracks are bend to a radius at 90 degree.Wall Bracket:Made of CRC steel with white powder coating finish. Bridge Clamp:Made of CRC steel with white powder coating finish.RoofSuspension:Made of aluminum pipe of 12.5mm &20mm diameter.The upper circular plate made of aluminum with 50.4mm diameter thickness.Curtain Removal Point is Made of SS.Runner: Comprises of Wheel type runners made of Teflon ISS material for easy and smooth sliding of curtain. Including all fixing charges and necessary fittings.
539
-
-
... More
Providing & supplying Patients Cot 36" wide x 80" length ,made of combination of mettallic and plastic,finishing by Pretreated and Epoxy Powder Coated.Provided by adjustable height for the entire bed, the head, and the feet, adjustable side rails, and electronic buttons to operate both the bed and other nearby electronic devices and are mounted on wheels allowing for mobility. Including soft furnishing items,necessary fittings and fixing charges.
31
-
-
... More
Providing & supplying ICU bed (200x90x60cm) made up of Frame work of M.S. Tube ,Pair of Foldable Aluminum Side Rails, head and foot board. Four section top made up of perforated MS Sheet. provided with 2 brakes and holder for Urine bag.finished with pretreated & Epoxy Powder Coated/ Baked Paint and Five Function available with manual operation Functions are Head End Elevation, Foot End Elevation, Hi-Low, Trendelenburg, Reverse Trendelenburg. Including soft furnishing items,necessary fittings and fixing charges.
37
-
-
... More
Providing & supplying Eletrical delivery bed (200x90x60cm) single size bed made up of Frame work of M.S. Tube ,Four section top made up of perforated MS Sheet,Pair of Foldable Aluminum Side Rails,head and Foot Panel.Provided with holder for Urine bag,Backrest elevation,Knee rest elevation,High/Low movement and Provision for I.V. Rod at all corners. Including soft furnishing items,necessary fittings and fixing charges.
3
-
-
... More
Providing and fixing examination couch with cabinets . Body section covered with sheet for 3 sides . It comes with three drawers & three cabinet. It has 2 section coushioned top. It has adjustable backrest by gas spring system.Ithas inbuilt foot step for patients. Product size: 183L X 50W X 82 H
9
-
-
... More
Providing & supplying manually operated SNCU beds 180x150x13cm ,made up of frame work of rectangular M.S Tube and 2 Section top made of perforated M.S Sheet,having head & foot Panels. finished with pre treated and Epoxy powder Coated. Including soft furnishing items,necessary fittings and fixing charges.
6
-
-
... More
Providing and supplying an examination couch, Model MEDIK-MX-168 (Medik168), with overall dimensions of 72” length, 24” width, and 32” height. The couch is equipped with an adjustable headrest for customizable positioning, three drawers for storing medical instruments or supplies, and two shelves with doors for secure and organized storage. It features a 2-inch high-density cushion to ensure patient comfort and is finished with epoxy powder coating for enhanced durability, corrosion resistance, and ease of maintenance. The product must comply with relevant healthcare standards, with materials and workmanship of the highest quality. Delivery and installation are to be completed at the specified location within the agreed project timeline.
10
-
-
... More
Providing and supplying a multifunctional couch/dialysis couch made of a strong and stable platform, designed to meet versatile medical requirements. The couch features a head cushion and armrests on both sides, with dimensions of 1950 mm in length, 650 mm in width without armrests, and height adjustable between 530 mm and 800 mm. The armrests, measuring 450 mm in length and 160 mm in width, are vertically and horizontally adjustable, can be moved out for easy entry of patients or donors, and provide enhanced flexibility and convenience. The couch offers motorized height adjustments and allows adjustment of the backrest, leg rest, height, Trendelenburg, and Reverse Trendelenburg positions, and can be converted into a chair position. It has a lifting capacity of at least 150 kg and comes with an IV rod attachment. The couch is equipped with four lockable castor wheels for ease of movement and stability. It features extra-thick, disinfectant-resistant upholstery for durability and hygiene. Delivery and installation are to be completed as per the project requirements.
1
-
-
... More
Providing & fixing of 90x200 cm size cot with base, legs, and frame works made up of Ashwood or hardwood furniture and provided with a fabric headboard of imported fabric and provided with provision for 10" mattresses. The cot will be finished with a matching finish or walnut finish. All exposed faces will be finished with PU polish for the wood frames.
7
-
-
... More
Providing and supplying a premium model pediatric bed with wheels and mattress, featuring crank-operated back-raise adjustment up to 75°. The bed dimensions are 1787 mm in length, 1034 mm in width, and 1285 mm in height (with ±1% tolerance). It comes with epoxy powder-coated sliding side rails for safety, and a pressed steel bottom for durability. The bed is equipped with 100 mm diameter casters, with brakes on opposite corners, allowing for easy mobility and secure positioning. Additionally, the bed includes a provision for an I.V. hanger rod attachment. The mattress is designed for comfort and support, and delivery and installation will be completed as per the specified requirements.
5
-
-
... More
Providing and supplying a stretcher on trolley, Model MEDIK-152, with dimensions of 80” length, 22” width, and 33” height. The stretcher features a strong MS tubular frame mounted on four swivel castors for easy maneuverability. It includes a removable stretcher top made of stainless steel sheet with a powder-coated finish for durability and easy maintenance. The stretcher is equipped with provisions for IV attachment and an oxygen cylinder carrier, making it suitable for emergency and medical transport purposes. Delivery and installation are to be completed as per project requirements.
5
-
-
... More
Providing and fixing ABS plastic, anti-rust, easy to clean bed side lockers. Including one drawer and equiped with a door wth glass holder, towel shelf on two sides with castor(2 with brake). Size:48x48x81cm.
15
-
-
... More
Providing and fixing locker cabinets and drawers made from MS CRCA sheet, stainless steel top with raised edge on 3 sides, castors 2 with brakes, pre treated powder coated finish.
50
-
-
... More
Providing and fixing over bed table, frame made of rectangular square tube with body section mounted on 5 cm castors, with laminated top of 75cmx 40cm with height adjustable gear handles.
50
-
-
... More
Providing and fixing trolley with integral ABS surface and special concave top. Framework made of round SS tube 202 Grade & 304 grade, product size: 70x45x90cm.
30
-
-
... More
Providing and fixing corridor handrails cum wall guard of 4" dia complete with continuous aluminum retainer and vinyl cover . Complete with mouting brackets, end returns and fixing accessories. Fixed at 1000mm (upto centre) from finished floor level.
387
-
-
... More
Providing and fixing 52mmx52mm corner guard complete with continuous aluminum retainer and vinyl cover. Complete with top caps,end returns and all fixing accessories.Fixed on walls above skirting
350
-
-
... More
Providing and fixing rigid pvc sheet 1mm sheet for wall protection, complete with top caps and silicon filling for joints.( To be used as kick plates on doors - size 4'x2').
90
-
-
... More
Providing and fixing foam mattress comes in 4 sections. It is covered with rexin closed with zip at one end. It is used on full fowler bed. Product size:190x90x10
126
-
-
... More
Procuring healthy grass free from weeds and foreign materials and laying on the soil medium as turfing,the rate include for grass cost, transport to site, cost and application of manure, planting, labour, supervision and maintenance for 2 months after planting
Pearl Grass
1532.71
-
-
... More
Procuring and planting specified nursery grown trees, shrubs and other plants .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 2 months after planting.
Royal palm
16
-
-
... More
Procuring and planting specified nursery grown trees, shrubs and other plants .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 2 months after planting.
Foxtail palm
18
-
-
... More
Procuring and planting specified nursery grown trees, shrubs and other plants .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 2 months after planting.
Bismarkia palm
24
-
-
... More
Procuring and planting specified nursery grown trees, shrubs and other plants .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 2 months after planting.
Jackfruit tree
6
-
-
... More
Procuring and planting specified nursery grown trees, shrubs and other plants .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 2 months after planting.
Elenji tree
6
-
-
... More
Procuring and planting specified nursery grown trees, shrubs and other plants .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 2 months after planting.
Coconut tree
6
-
-
... More
Procuring and planting specified nursery grown trees, shrubs and other plants .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 2 months after planting.
Malpighia Topiary in steel mesh
28
-
-
... More
Procuring and planting specified nursery grown trees, shrubs and other plants .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 2 months after planting.
Eugenia Topiary
28
-
-
... More
Procuring and planting specified nursery grown trees, shrubs and other plants .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 2 months after planting.
Clerodendrum Inerme -Hedge
88
-
-
... More
Procuring and planting specified nursery grown trees, shrubs and other plants .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 2 months after planting.
Murraya Exotica - Flower bush
42
-
-
... More
Procuring and planting specified nursery grown trees, shrubs and other plants .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 2 months after planting.
Heliconia Caribea
47
-
-
... More
Procuring and planting specified nursery grown trees, shrubs and other plants .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 2 months after planting.
Areca tree
19
-
-
... More
Supplying , stacking and spreading sludge / well decayed farm yard manure from thesource,Mixing earth and manure or in proportion specified or directed, Spreading of dung manure or / and good earth in required thickness. and fine dressing the ground as per natural gradiantapproved by the engineer in charge incl. screening, loading, unloading, conveyance and stacking at site.
153.28
-
-
... More
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete : Serrated with central bulb (225 mm wide, 8-11 mm thick)
436.26
-
-
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25
557.94
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
3077.41
-
-
... More
Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side, including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 coarse sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-charge.
642.16
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin-charge).
32.11
-
-
... More
Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-incharge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign mater;al etc. and lining out complete. New work (Two or more coats)
1292.52
-
-
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1646.4
-
-
... More
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1317.12
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
2606.4
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
3292.8
-
-
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
1975.68
-
-
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
658.56
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20 mm
977.4
-
-
... More
25 mm
1975.68
-
-
... More
32 mm
987.84
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 A switch
1051
-
-
... More
2 way 5/6 A switch
70
-
-
... More
15/16 A switch
196
-
-
... More
3 pin 5/6 A socket outlet
510
-
-
... More
6 pin 15/16 A socket outlet
196
-
-
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
294
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
144
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
... More
1 or 2 Module (75mmX75mm)
161
-
-
... More
3 Module (100mmX75mm)
235
-
-
... More
4 Module (125mmX75mm)
93
-
-
... More
6 Module (200mmX75mm)
185
-
-
... More
8 Module (125mmX125mm)
46
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
8 way , Double door
2
-
-
... More
12 way , Double door
4
-
-
... More
16 way , Double door
4
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
6 way (4 + 18), Double door
8
-
-
... More
8 way (4 + 24), Double door
18
-
-
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
... More
4 way (4 + 12), Double door
6
-
-
... More
8 way (4 + 24), Double door
4
-
-
... More
12 way (4 + 36), Double door
2
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
628
-
-
... More
Double pole
10
-
-
... More
Triple pole
106
-
-
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
72
-
-
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
25 A
10
-
-
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 A
26
-
-
... More
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.
32
-
-
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
5
-
-
... More
Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
2
-
-
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
10
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
10
-
-
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
120
-
-
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
120
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
20
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
80
-
-
... More
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
250
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.
-
-
-
... More
Upto 35 sq. mm
55
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
75
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
30
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
35
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
... More
Upto 35 sq. mm (clamped with 1mm thick saddle)
270
-
-
... More
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
360
-
-
... More
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
160
-
-
... More
Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
190
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required.
-
-
-
... More
Above 120 sq. mm and upto 400 sq. mm
60
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
3½ X 25 sq. mm (28mm)
6
-
-
... More
3½ X 35 sq. mm (32mm)
4
-
-
... More
3½ X 50 sq. mm (35mm)
54
-
-
... More
3½ X 70 sq. mm (38mm)
8
-
-
... More
3½ X 95 sq. mm (45mm)
4
-
-
... More
3½ X 150 sq. mm (50mm)
8
-
-
... More
3½ X 185 sq. mm (57mm)
10
-
-
... More
3½ X 240 sq. mm (62mm)
18
-
-
... More
3½ X 300 sq. mm (70mm)
6
-
-
... More
3½ X 400 sq. mm (82mm)
66
-
-
... More
4 X 10 sq. mm (25mm)
28
-
-
... More
4 X 16 sq. mm (28mm)
32
-
-
... More
4 X 25 sq. mm (28mm)
40
-
-
... More
Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :
-
-
-
... More
300 sq. mm
3
-
-
... More
RMU
1
-
-
... More
11KV Outdoor Metering Cubicle : SITC of 11KV Outdoor Metering Cubicle comprising of : 3 Nos. Current transformer (---/5A,15VA,class 0.2s) 1 No. Potential transformer(11KV /110V,100VA,class 0.2) Separate Compartment for CT/PT and TOD Meter with KSEB sealing facility TTB with Fuse and Carrier Provision for incoming and outgoing XLPE 11 KV Cable and cable entry from bottom side with cable box suitable for 3 x 300 sqmm XLPE, 11KV Al: cable Enclosure-Powder coated CRCA sheet 2MM –IP 54
1
-
-
... More
11KV TOD Meter: SITC of 11KV/ √3 / 110V/ √3 , Class 0.2S , 15VA HT TOD Meter suitable for mounting outdoor type with all standard accessories. 11 KV KSEB metering cubicle, lead wires etc.complete Carrying CT/PT units with TOD meter for testing and calibrating at the KSEB Testing Lab and taking back the same to the site is included in the scope of the contractor.Statutory testing fees shall be remitted and will be reimbursed against producing original receipt
1
-
-
... More
11KV Multi Panel System (VCB/LBS/LBS): SITC of H.T 4 Panel comprising of : Incomer 1 No. Indoor type 11kV, 630A, 26.3kA for 3 sec Horizontal Draw out VCB fitted with Manual / Motor operated spring charging mechanism with 230V AC motor and motor control switch, shunt trip coil of 24V DC, closing coil of 24V DC, Auxiliary Contact 6NO + 6NC, Mechanical ON/OFF indicator, mechanical operation counter, master trip relay , auxilliary relay with multifunction meter, voltmeter with selector switch and 3 nos ammeter , necessary cast resin current transformer (45/5A , Cl:5P10,/ Cl: 1,15 VA-dual core),Potential transformer ( 11KV/110V , Cl:0.2 , 25VA ) Anti pumping feature, instantaneous IDMT relay with Microprocessor based 3O/C + and 1E/F Protection relay, Strip Heater with thermostat , Power pack 230V AC-24 V DC emergency OFF push button with Aluminium busbar and copper earthing strip, incoming cable entry at bottom suitable for 3 x 300 sqmm 11KV XLPE Al: cable Outgoing 3 Nos. Indoor 11kv,630A, 26.3 kA for 1 sec Load Break Switch Panel consist of mechanical / electrical Trip bush button ,ON/OF Indicator ,Space heater with thermostat , 230V AC shunt trip coil HT HRC Fuses links with Aluminium busbar and copper earthing strip, on HVside Rigid Bus Bar interonnection to the Transformer Complete with all interconnection , powder coated approved color control wiring,earth bus of adequate capacity & double earthing to all breakers etc.as per Electrical Inspectorate / KSEB Standards.
1
-
-
... More
11kV/433v,500KVA Cast Resin Transformer: SITC of Transformer comprising of : 11kV/433V ,500KVA ,50Hz,3phase,Vector Dyn 11 Resin Cast Indoor Transformer with off circuit tapping +5% to -5% in steps of 2.5% with winding temperature indicator and hooter with all standard accessories as per IS 2026/77 on HV side Rigid Bus Bar interonnection to the 11KV LBS Panel and on LT side cable box suitable for 3 x 3.5 x 300 sq.mm XLPE Al ; cable with all standard fittings and accessories.Painting shall be carried out as per IS 631, impedance of the transformer shall be as per relevant standards.
2
-
-
... More
NEUTRAL CTs: Supply & Fixing of 1no Cast Resin Neutral CT with ratio 150/5A ,15VA, Cl.5P10, fixed in a suitable M.S box with view glass.
1
-
-
... More
HT CABLES: Supply of 11KV stranded compact circular aluminium conductor,conductors insulation screened with extruded semi conducting compound in combination with copper tape (0.3 kA for 1 sec.), cores laid up, inner sheath of PVC tape,galvanized steel flat strip armoured,and overall PVC sheathed cable conforming to IS 7098/11/85 with latest amendments & confirming to the GTP of Group A of following sizes. 3C - 300 Sq.mm HT Cable
60
-
-
... More
SITC of D.G. set of following KVA 0.8 P.F.3 phase,50c/s,433V, comprising diesel engine, fuel tank, base plate, antivibration pad, battery, battery lead wire, battery charger self starting and self charging mechanism, and residential type silencer, control panel , in accoustic enclosure etc.with all standard accessories as per Electrical Inspectorate standards and pollution control board norms. 500 KVA
2
-
-
... More
NEUTRAL CTs : Supply & Fixing of 1 No. Cast Resin Neutral CT fixed in a suitable M.S. box with view glass. 150/5A, 15VA, Cl.5P10
2
-
-
... More
L.T.PANELS SITC of cubicle type medium voltage switch boards as per specifications mentioned below, comprising of ACBs / MCCBs., enclosed in 16 guage M.S.cubicle complete with angle iron frame work, panel doors , horizontal and vertical busbars and outgoing feeders, FRP separators, phase barriers, gaskets for door, feeders designations, etc., Main Switch Board shall be capable of withstanding 50 KA fault level. The panel shall be suitable for erection on the floor using channel and fastners at regular intervals. All panels should have fire suppression system( Panel should confirm to BIS,IE rules,KSEI/ KSEB Standards)
-
-
-
... More
MAIN MV PANEL
Free standing, floor mounting Switchboard fabricated out of 14SWG CRCA sheet with Top Cable entry facility at HT side for 4nos 500 KVA incomer & Cable/ Bus bar trunking facility at LT side
1) Main Busbars: 800A,50KA TPN Aluminium Busbars – 1sets/sections; 2) Transformer 500 KVA Incomer: Moulded Case Circuit Breaker TP, 800A, 50KA Set 666.5A with Electronic release FD KIT, OC, SC, EF, Shunt & Isolation duty Current Limiting type – 2no
4) Diesel Generator 500 KVA incomer -2 no. Metering and Indications:
3Phase Digital Combination Meter with Ammeter, KW Meter, PF Meter Model EM6400 of Conserve or equivalent , 3nos Cast Resin Metering CTs, CL1,10VA 630/5, 3nos 2A Control fuses – 1set
LED Type Red Yellow Blue (RYB), Red Amber Green (Close/Trip/Open) Indication Lamps with Control fuses and toggle switches – 1set
3Phase Digital Voltmeter 0-500V Model DM3256 of Conzerv or equivalent and 2A Control fuses - 1set
Relays: Stand by Earth fault relay 10-40% 1.3sec IDMT & 400/5 Class 10P10,15VA,415V Resin cast protection CT - 1set; AMF Relay + PLC based Synchronisation Relay
5) Outgoing Feeders:
Moulded Case Circuit Breaker TP, 630A, 36KA – 2nos
Moulded Case Circuit Breaker TP, 500A, 36KA – 4nos
Isolator TP, 400A - 1no
Provision shall be made for sealing of all shutters.
1
-
-
... More
APFC PANEL - 150 KVAr
SITC of APFC Panel comprising of : Incomer : 1 No. 250A, TPN, Isolator Indication/Protection 1 Set R,Y,B LED Type Phase Indicating Lamps with 2A SP MCB as control. 1 No. 8 STAGE APFC Relay. 1 Set TPN AL: Bus bars Suitably rated Outgoing 1 No.125A TP Capacitor Switching Contactor with 125 A TPN SFU with HRC Fuses Coupled with 1no 50 KVAr Capacitor. 3 No. 63A TPN SFU with 63A HRC Fuses Coupled with 3 no 25 KVAr Capacitor. 3 No.40A TP Capacitor Switching Contactor with 40 A TPN SFU withC152:C163 HRC Fuses Coupled with 3 no 10 KVAr Capacitor. 2 No.16A TP Capacitor Switching Contactor with 16 A TPN SFU with HRC Fuses Coupled with 2 no 5KVAr Capacitor. Complete with all interconnection , powder coated approved color control wiring,earth bus of adequate capacity & double earthing to all switches etc.as per Electrical Inspectorate / EB Standards.
2
-
-
... More
SSB GF
SITC of Floor Panel comprising of : Incomer : 1No. 500A TPN Isolator; 1 Set TPN AL: Bus bars Suitably rated Metering/Indication : 1 Set. R,Y,B LED type Phase Indicating Lamps with 2A SP MCB as control. 3 Nos. MFDM (KW,KWh,V, A,F ); 3 Nos .500/5A,CL:1, 15VA CTs Outgoing : 1 No. 250 A 25kA TP MCCB; 1 No.200 A 25kA TP MCCB; 2 Nos.100 A 25kA TP MCCB as outgoing; 1 No . as Spare. Complete with all interconnection , powder coated approved color control wiring,earth bus of adequate capacity & double earthing to all switches etc.as per Electrical Inspectorate / EB Standards.
1
-
-
... More
SSB FF
SITC of Floor Panel comprising of : Incomer : 1No. 250A TPN Isolator; 1 Set TPN AL: Bus bars Suitably rated Metering/Indication : 1 Set. R,Y,B LED type Phase Indicating Lamps with 2A SP MCB as control. 3 Nos. 0-100A Ammeter.; 3 Nos .250/5A,CL:1, 15VA CTs Outgoing : 1 No. 160 A 25kA TP MCCB; 1 No.100 A 16kA TP MCCB; 1 No.100 A TP MCB as outgoing; 1 No . as Spare. Complete with all interconnection , powder coated approved color control wiring,earth bus of adequate capacity & double earthing to all switches etc.as per Electrical Inspectorate / EB Standards.
1
-
-
... More
SSB SF
SITC of Floor Panel comprising of : Incomer : 1No. 250A TPN Isolator; 1 Set TPN AL: Bus bars Suitably rated Metering/Indication : 1 Set. R,Y,B LED type Phase Indicating Lamps with 2A Control fuse as control. 3 Nos. MFDM (KW,KWh,V, A,F ); 3 Nos .250/5A,CL:1, 15VA CTs Outgoing : 1 No. 100 A 16kA TP MCCB; 2 Nos.80 A 16kA TP MCCB; 2 Nos.63 A TP MCB as outgoing; 1 No . as Spare. Complete with all interconnection , powder coated approved color control wiring,earth bus of adequate capacity & double earthing to all switches etc.as per Electrical Inspectorate / EB Standards.
1
-
-
... More
SSB COMMON
SITC of Floor Panel comprising of : Incomer : 1No. 500A TPN Isolator; 1 Set TPN AL: Bus bars Suitably rated Metering/Indication : 1 Set. R,Y,B LED type Phase Indicating Lamps with 2A Control fuse as control. 3 Nos. MFDM (KW,KWh,V, A,F ); 3 Nos .250/5A,CL:1, 15VA CTs Outgoing : 1 No. 100 A 16kA TP MCCB; 2 Nos.80 A 16kA TP MCCB; 2 Nos.63 A TP MCB as outgoing; 1 No . as Spare. Complete with all interconnection , powder coated approved color control wiring,earth bus of adequate capacity & double earthing to all switches etc.as per Electrical Inspectorate / EB Standards.
1
-
-
... More
HVAC PANEL
SITC of Floor Panel comprising of : Incomer : 1No. 500A TPN Isolator; 1 Set TPN AL: Bus bars Suitably rated Metering/Indication : 1 Set. R,Y,B LED type Phase Indicating Lamps with 2A Control fuse as control. 3 Nos. MFDM (KW,KWh,V, A,F ); 3 Nos .500/5A,CL:1, 15VA CTs Outgoing : 3 Nos. 200 A 25kA TP MCCB as outgoing; 1 No . as Spare. Complete with all interconnection , powder coated approved color control wiring,earth bus of adequate capacity & double earthing to all switches etc.as per Electrical Inspectorate / EB Standards.
1
-
-
... More
HVAC SUB PANEL
SITC of Floor Panel comprising of : Incomer : 1No. 200A TPN Isolator; 1 Set TPN AL: Bus bars Suitably rated Metering/Indication : 1 Set. R,Y,B LED type Phase Indicating Lamps with 2A SP MCB as control. 3 Nos. MFDM (KW,KWh,V, A,F ); 3 Nos .200/5A,CL:1, 15VA CTs Outgoing : 7 Nos.80 A 16kA TP MCCB as outgoing; 1 No . as Spare. Complete with all interconnection , powder coated approved color control wiring,earth bus of adequate capacity & double earthing to all switches etc.as per Electrical Inspectorate / EB Standards.
3
-
-
... More
SSB OT
SITC of Floor Panel comprising of : Incomer : 1No. 160A TPN Isolator; 1 Set TPN AL: Bus bars Suitably rated Metering/Indication : 1 Set. R,Y,B LED type Phase Indicating Lamps with 2A Control fuse as control. 3 Nos. MFDM (KW,KWh,V, A,F ); 3 Nos .160/5A,CL:1, 15VA CTs Outgoing : 1 No. 120 A SET @ 100A 25kA 4P MCCB; 1 No. 100 A SET @ 80A 25kA 4P MCCB as outgoing; 1 No . as Spare. Complete with all interconnection , powder coated approved color control wiring,earth bus of adequate capacity & double earthing to all switches etc.as per Electrical Inspectorate / EB Standards.
1
-
-
... More
UTILITY PANEL
SITC of Floor Panel comprising of : Incomer : 1No. 500A TPN Isolator; 1 Set TPN AL: Bus bars Suitably rated Metering/Indication : 1 Set. R,Y,B LED type Phase Indicating Lamps with 2A Control fuse as control. 3 Nos. MFDM (KW,KWh,V, A,F ); 3 Nos .500/5A,CL:1, 15VA CTs Outgoing : 2 Nos.200 A 25kA TP MCCB; 4 Nos.100 A 25kA TP MCCB; 1No. 100A TP Isolator as outgoing; 1 No. as Spare. Complete with all interconnection , powder coated approved color control wiring,earth bus of adequate capacity & double earthing to all switches etc.as per Electrical Inspectorate / EB Standards.
1
-
-
... More
PUMP PANEL
SITC of Floor Panel comprising of : Incomer : 1No. 100A TPN Isolator; 1 Set TPN AL: Bus bars Suitably rated Metering/Indication : 1 Set. R,Y,B LED type Phase Indicating Lamps with 2A Control fuse as control. 3 Nos. MFDM (KW,KWh,V, A,F ); 3 Nos .100/5A,CL:1, 5VA CTs Outgoing : 4 Nos. 25 A TP MCB; 3 Nos. 16 A TP MCB as outgoings.; coupled with: 1 Nos. Star/Delta Starters (upto 14 KW) with: 1 Sets. "ON" "OFF" luminous Push Buttons with 1NO- 1NC contacts. 1 No . 25 A TP MCB as Spare. Complete with all interconnection , powder coated approved color control wiring,earth bus of adequate capacity & double earthing to all switches etc.as per Electrical Inspectorate / EB Standards.
1
-
-
... More
LAUNDRY PANEL
SITC of Floor Panel comprising of : Incomer : 1No. 200A TPN Isolator; 1 Set TPN AL: Bus bars Suitably rated Metering/Indication : 1 Set. R,Y,B LED type Phase Indicating Lamps with 2A Control fuse as control. 3 Nos. MFDM (KW,KWh,V, A,F ); 3 Nos .200/5A,CL:1, 15VA CTs Outgoing : 6 Nos.63 A TP MCB as outgoing; 1 No . as Spare. Complete with all interconnection , powder coated approved color control wiring,earth bus of adequate capacity & double earthing to all switches etc.as per Electrical Inspectorate / EB Standards.
1
-
-
... More
LIFT PANEL
SITC of Lift Panel comprising of : Incomer : 1 No. 100A, TPN Isolator. 1 Set. R,Y,B LED type Phase Indicating Lamps with 2A Control fuse as control . 1 Set TPN AL: Bus bars Suitably rated Metering/Indication : 1 Set. R,Y,B LED type Phase Indicating Lamps with 2A Control fuse as control. 3 Nos. MFDM (KW,KWh,V, A,F ); 3 Nos .100/5A,CL:1, 15VA CTs Outgoing : 2 Nos. 63 A 100 mA 4P RCBO; 2 Nos. 63 A 4P MCCB ; Complete with all interconnection , powder coated approved color control wiring,earth bus of adequate capacity & double earthing to all switches etc.as per Electrical Inspectorate / EB Standards.
3
-
-
... More
UPS PANEL - MEDICAL EQUIPMENT - 125 KVA
SITC of Floor Panel comprising of : Incomer : 1No. 200A TPN Isolator; 1 Set TPN AL: Bus bars Suitably rated Metering/Indication : 1 Set. R,Y,B LED type Phase Indicating Lamps with 2A Control fuse as control. 3 Nos. MFDM (KW,KWh,V, A,F ); 3 Nos .200/5A,CL:1, 15VA CTs Outgoing : 3 Nos. 63 A TP MCB; 1 No 40 A TP MCB as outgoing; 2 Nos. 40 A 30mA 4P, RCBO; 1 No . as Spare. Complete with all interconnection , powder coated approved color control wiring,earth bus of adequate capacity & double earthing to all switches etc.as per Electrical Inspectorate / EB Standards.
1
-
-
... More
UPS PANEL - 10 KVA
SITC of UPS PANEL comprising of : Incomer : 1 No. 63, TPN Isolator. 1 Set. R,Y,B LED type Phase Indicating Lamps with 2A Control fuse as control . 1 Set TPN AL: Bus bars Suitably rated Outgoing : 2 Nos. 40 A, 4P, RCBO; 2 Nos. 25 A, DP, RCBO ; Complete with all interconnection , powder coated approved color control wiring,earth bus of adequate capacity & double earthing to all switches etc.as per Electrical Inspectorate / EB Standards.
2
-
-
... More
UPS PANEL - 30 KVA
SITC of UPS PANEL comprising of : Incomer : 1 No. 63, TPN Isolator. 1 Set. R,Y,B LED type Phase Indicating Lamps with 2A Control fuse as control . 1 Set TPN AL: Bus bars Suitably rated Outgoing : 2 Nos. 40 A, 4P, RCBO; 2 Nos. 25 A, DP, RCBO ; Complete with all interconnection , powder coated approved color control wiring,earth bus of adequate capacity & double earthing to all switches etc.as per Electrical Inspectorate / EB Standards.
3
-
-
... More
30 KVA UPS - Three Phase : SITC of 30kw Frame with 5kw x 6 modules three phase in and out. with indoor (IP21) with surge protection system with 60 min backup battery @ 30kva .8 PF load with min VAH of 48000 Dual string (SMF battery of reputed approved make. Input pf 0.99, with external input isolation transformer, with IGBT rectifier and inverter Double conversion technology, with input voltage range 320-460 @ full load, 50Hz Three Phase, output 400V, 50Hz Three phase, compatibility etc.
3
-
-
... More
10 KVA UPS - Three Phase: SITC of 10kw Frame with 3.4kw x 3 modules three phase in and out. With indoor (IP21) with surge protection system with 60 min backup battery @ 10kva .8 PF load with min VAH of 16320 Dual string (SMF battery of reputed approved make. Input pf 0.99, with external input isolation transformer, with IGBT rectifier and inverter Double conversion technology, with input voltage range 320-460 @ full load, 50Hz Three Phase, output 400V, 50Hz Three phase, compatibility etc.
2
-
-
... More
125 KVA UPS - Three Phase: SITC of 120kw Frame with 30kw x 5 modules three phase in and out. With indoor (IP21) with surge protection system with 60 min backup battery @ 10kva .8 PF load with min VAH of 16320 Dual string (SMF battery of reputed approved make. Input pf 0.99, with external input isolation transformer, with IGBT rectifier and inverter Double conversion technology, with input voltage range 320-460 @ full load, 50Hz Three Phase, output 400V, 50Hz Three phase, compatibility etc.
1
-
-
... More
SUPPLY OF LT CABLE: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
1 X 240 sq. mm
180
-
-
... More
3 X 4 sq. mm
220
-
-
... More
3½ X 25 sq. mm
38
-
-
... More
3½ X 35 sq. mm
47
-
-
... More
3½ X 50 sq. mm
188
-
-
... More
3½ X 70 sq. mm
140
-
-
... More
3½ X 95 sq. mm
40
-
-
... More
3½ X 150 sq. mm
20
-
-
... More
3½ X 185 sq. mm
320
-
-
... More
3½ X 240 sq. mm
280
-
-
... More
3½ X 300 sq. mm
65
-
-
... More
3½ X 400 sq. mm
620
-
-
... More
4 X 6 sq. mm
120
-
-
... More
4 X 10 sq. mm
280
-
-
... More
4 X 16 sq. mm
400
-
-
... More
4 X 25 sq. mm
460
-
-
... More
WIRING: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable PVC box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
541
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable PVC box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
35
-
-
... More
Wiring for light point/ fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required for;
-
-
-
... More
Two light controled by one switch.
158
-
-
... More
Three light controled by one switch.
78
-
-
... More
Four light controled by one switch.
42
-
-
... More
Five light controled by one switch.
22
-
-
... More
S' type M.S. fan hook fabricated from suitable dia. M.S. rod duly painted for fixing of ceiling fan. The 'S' type hook shall be fixed to steel bar in RCC ceiling. The ceiling shall be replastered with sand, cement & neeru etc. The cost of labours for chipping out ceiling upto steel bar & fixing of 'S' hook & resurfacing the ceiling is included in the cost of item
171
-
-
... More
CABLE TRAYS: FRP Cable Tray: Supply of the following sizes of Ladder Type FRP cable trays with vertical sides on both ends as per approved design and FRP supports with coupler plates spaced 300mm apart throughout the length as specified, including the cost of support hooks, fasteners, painting if required etc.( Contractor shall ensure to use corrossion free materials as support or fastening fittings)
-
-
-
... More
150mm(150x100x25)
120
-
-
... More
300mm(300x100x25)
250
-
-
... More
600mm(600x100x25)
100
-
-
... More
RACE WAYS: Readymade 2500mm standard length, prefabricated, GI trunking from MS sheet and then hot dip galvanised, of following sizes and associated accessories such as coupler plates, tees, elbow etc. 50 mm side flanges shall be provided. Galvanisation thickness shall be minimum 86 Micron. cost of trunking shall be included junction box of suitable size, and all other accessories required to complete the work.
-
-
-
... More
100 x 40mm (W x H) - (14 SWG - 2mm) with cover without partition
165
-
-
... More
150 x 40mm (W x H) - (14 SWG - 2mm) with cover without partition
143
-
-
... More
300 x 40mm (W x H) - (14 SWG - 2mm) with cover without partition
93
-
-
... More
IP 44 SS Floor Box (120 x 120 mm) - Flush mount floor box for concrete floors, IP 40 - for 3 Mosaic modules
38
-
-
... More
LIGHT FITTINGS / FANS: SITC of following Light Fixtures/Ceiling Fans / Exhaust Fans
-
-
-
... More
LED Downlight Recessed Fitting 15 W
2094
-
-
... More
LED Downlight Recessed Fitting 12 W
180
-
-
... More
LED Recessed Luminaire 36Watts
198
-
-
... More
LED Linear Fixture 20Watts 4ft Surface Mounted
36
-
-
... More
Mirror Light 5W
46
-
-
... More
Ceiling Fan -1200 mm ( BLDC)
294
-
-
... More
Exhaust Fan -450 mm
24
-
-
... More
Bollard Lights
150
-
-
... More
50W Flood Light
150
-
-
... More
80W Flood Light
70
-
-
... More
Air Terminal: Providing and fixing Fully Solid Vertical Air terminals for wind stability as per IS/IEC -62305 part-3. For 1,2,3,4 meter air terminal 16mm rod tapered to 10 mm aluminium rod meter rod: Meets the requirement (IS/IEC 62305). Semi-hard (E-AlMgSiO5) Suitable for high wind load. All air terminal must have Interception Tip at the Top of air terminal. System consist of Fang Fix with base and clamp on the top air terminal is erected. Air terminal Joining Clip Stainless Steel SS 304 clamp made of cable bracket, lightning tested for 100 KA 10/350 micro sec waveform. Stainless Steel Wall Clamp or 16 KG stone of 365 mm diameter, high level of stability. No. of stones/wall clamps depending on wind load. Quick and easy mounting of interception rod using anchors. Concrete, frost-resistant, can be stacked. Govt approved Indian labs test certificate required. Make: Cape/Dehn
-
-
-
... More
2 meter air terminal with Interception Tip mounted on Stainless Steel Wall Clamp mounting accessories.
12
-
-
... More
Parapet / Down Conductors: Providing & fixing of 8mm solid aluminium round conductor with necessary holders @ required interval as specified below: Meets the requirement of (IS/IEC 62305) : semi-hard (E-AlMgSiO5 )with 50 sq.mm cross sectional area. Govt approved Indian labs test certificate required. Make: Cape/Dehn
-
-
-
... More
Conductor with Down Conductor Holder made of whether resistant plastic holder @ every 0.75 meters
151
-
-
... More
Conductor with Terrace Conductor Fibre Reinforce Concrete holder @ every 0.75 meters
253
-
-
... More
T-Connectors: Providing and fixing of Cross Connector/T Connector/Folding Clamp/Clamping Shoe/ Expansion Piece: to route vertical down conductor /mesh formation made of Aluminium Ferrule using screw free joints. Folding Clamp/Clamping Shoe for metal panels (up to 20mm thickness of the metal frame): Folding clamp/clamping shoe for metal frame thickness up to 20mm, made of stainless steel SS 304/316 grade , conforms to the requirements according to (IS/IEC 62305). Expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length at every 20 meters horizontally. Using round conductor 8mm aluminium conductor with straight Connector: using Aluminium Ferrule. Quick installation using crimp joints. Conforms to the requirements according to (IS/IEC 62305). Make sure all joints are strong and will be inspected at site. Galvanised Iron joints are not permitted to avoid risk of corrosion. Single bolt joints are not permitted to avoid risk of faulty loose joints and reduce risk of flash over. Govt approved Indian labs test certificate required. Make: Cape/Dehn
22
-
-
... More
Test Joints: Providing and fixing of Stainless Steel Test Joint suitable with suitable Outdoor Enclosure: For 8mm dia solid round aluminium conductor & 10mm dia copper coated solid steel round conductor having 100 microns of copper bonding . Conforms to the requirements according to (IS/IEC 62305).The enclosure should be outdoor glass-fibre reinforced polycarbonate opaque having minimum inner dimension of 75mm x 75 mm x 50 mm. The test link has to be straight and needs minimum 4 mounting screws for strong joints Inspection of bimetallic corrosion at site required. Seperation of 8mm Aluminium & 10mm Copper bonded steel is required for future inspection and contractor has to make sure both conductors permitted. Govt approved Indian labs test certificate required. Make: Cape/Dehn
11
-
-
... More
Ring Earthing: Providing and laying copper coated steel solid round conductor 10mm diameter from earth electrode directly in ground as required. copper coated steel, high corrosion resistant. Meets the requirement of (IS/IEC 62305) copper coating thickness of 100microns Should be tested and use exclusively for lightning protection earthing system and ring equipotential bonding. After test link needs to be routed inside Heavy duty conduit to avoid touch potential till ground level. Govt approved Indian labs test certificate required. Make: Cape/Dehn
320
-
-
... More
Welded Joints: Installation of Exothermic Weld Joints for 10mm round copper bonded steel conductor having 100 microns as per IS/IEC 62305. Each under ground joints has to be wrapped with petrolatum- coated chemical fibre fabric having 1.1mm thick and width 50mm. Govt approved Indian labs test certificate required. Make: Cape/Dehn
18
-
-
... More
Earth Pits: Providing and fixing of maintenance free Earthing system comprises of molecularly bonded copper of 99.9% purity on low carbon steel of min 3048mm length (10 feet), having a diameter of 20mm with copper bonding thickness of 250 microns as per UL 467. The Rod has to be either continuous or with self-coupling peg & bore arrangement with fault current withstand capability of 30 KA rms value for 1 second and I peak of 76 KA The rod must be having corrosion test, peel off test for uniform coating, 180 degree bend test with out peeloff of copper bonding. Exothermic welded Clamp for clamping as suggested as per NBC 2016.Ordinary Stainless steel/Copper alloy universal clamps are not recommended. For self coupling peg & bore arrangement rod needs Impact point on the bottom rod for easy insertion. Earth enhancing mineral compound is used for improving the soil conductivity. The material shall be mineral inert to sub soil and shall not pollute the environment and non corrosive to earth rod. The material should have a resistivity less than 0.2 Ωm. It should be free from hazardous substances.The mineral compound is required to have minimum 17.5 Kg of the total composite.The compound should be chemically inert and needs to submit Govt approved Indian labs test certificate. Concrete Earth electrode inspection chamber with weight bearing capacity of 50KN. The dimension shall be 320mmx 320mmx 190mm. Govt approved Indian labs test certificate required. Make: Cape/Dehn
11
-
-
... More
Solar Street Lights: SITC of Solar Street Light mounted on 2.5 inch dia. 5 meter height G.I Post comprising of : 60W Monocrystalline panels , 26Ah Gell Battery , 15 Watts LED Street Light, Powder doated battery box and automatic ON/OFF Sensor etc. complete.
22
-
-
... More
Solar PV: 100KW Common load
1
-
-
... More
CCTV: Supplying and fixing of 25 mm Medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
840
-
-
... More
Supply and drawing of UTP 4 pair Cat 6 LAN cable in the existing surface/recessed PVC conduit as required. one run
6200
-
-
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
... More
63 mm dia (OD-63 mm & ID-51 mm nominal)
240
-
-
... More
DATA: Supplying and fixing of 25 mm Medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
3400
-
-
... More
Supplying and fixing of 32 mm Medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
3950
-
-
... More
Supplying and fixing of GI box of following size modules, alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm)
80
-
-
... More
Supply and drawing of UTP 4 pair Cat 6 LAN cable in the existing surface/recessed PVC conduit as required. one run
6900
-
-
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)
120
-
-
... More
Supplying and drawing 2 pair, 0.5 sq mm FR PVC insulated copper conductor, un armoured telephone cable in the existing surface/recessed steel/ PVC conduit.
5980
-
-
... More
Supplying and fixing of 25 mm Medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
3420
-
-
... More
Supplying and fixing of 32 mm Medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
2200
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.Telephone socket
120
-
-
... More
Supplying and fixing of GI box of following size modules, alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 module( 75 mmx75 mm)
120
-
-
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)
120
-
-
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required
3620
-
-
... More
Supplying and fixing of 25 mm Medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
2550
-
-
... More
Supplying and fixing of 32 mm Medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
980
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. TV antenna socket outlet
46
-
-
... More
Supplying and fixing following size/ modules,GI box along with modular base, cover plate for modular switches in recess etc as required. 1 or 2 module( 75 mmx75 mm)
46
-
-
... More
CCTV: Supply, installation, testing and commissioning of IP based IR Varifocal dome Camera, 1/3" CMOS, 3 MP, 2.7–12 mm MFZ, night vision compatible,IR range of 40 mtrs PoE, inbuilt micro SD card,Ethernet port, H.264, IP 66, ONVIF, UL, FCC & CE certified. All mounting accessories shall be included
42
-
-
... More
Supply, installation, testing and commissioning of IP based IR bullet Camera, 1/3" CMOS,3 MP, night vision compatible,IR range of 40 mtrs PoE, inbuilt micro SD card,Ethernet port, H.264, IP 66, ONVIF, UL, FCC & CE certified. All mounting accessories shall be included
10
-
-
... More
Supply, installation, testing and commissioning of IP based IR PTZ camera, 1/3" CMOS, 2 Megapixel,30X zoom, WDR, IR range of 200 Meters, inbuilt micro SD card,,Ethernet port,TDN, PoE, DWDR, BLC, AGC, DNR, OSD,H.264 High Profile dual-stream, ONVIF, Wall/corner Mount, IP-66. CE, FCC, C-Tick certified. All mounting accessories and mounting arm suitable for the location shall be included
3
-
-
... More
Supply,installation, testing and commissioning of IP Network Video Recorders 16 channel with 16 ports, 2 SATA, audio 1 input 1 output, video 1 HDMI 1 VGA, recording resolution 5MP/3MP/1080P, 720P/ D1 @ 30 fps, network throughput 200 Mbps from IPC and 128 Mbps to Client, Smart search supported, Remote access by DDNS & P2P, 4 channel alarm input and 2 channel relay output, 2 USB ports, ONVIF, UL & CE certified.
4
-
-
... More
Supply, installation, testing and commissioning of 20 100/1000 SFP ports + 4 Combo 10/100/1000BASE-T/SFP ports + 4 10G SFP+ ports, L2 Management Switch - Core Switch
1
-
-
... More
Supply, installation, testing and commissioning of 8 port- Edge PoE switch
4
-
-
... More
Supply, installation, testing and commissioning of 24 port- Edge PoE switch
6
-
-
... More
Supply, installation, testing and commissioning of Patch Panel UTP Keystone- 24 Port- Fully loaded (Cat 5e,Cat 6 & Cat 6 A )
10
-
-
... More
Supply and installation of Cat 6 UTP patch cord, 1 mtr
920
-
-
... More
Supply, installation, testing and commissioning of Server PC, Intel i7 processor, 24 inch LED monitor, Gigabit LAN port, USB port, 8GB DDR3 RAM,1TB HDD,1GB dual graphic card, 100/1000 LAN ports, optical mouse, Keyboard, DVD Writer. Genuine Win 8.1 Pro - Down grade to Win 7 professional, 24 inch LED monitor
1
-
-
... More
Supply, installation, testing and commissioning of Professional Joystick designed for Surveillance application as compatible with the above mentioned system. UL+CE+FCC certification minimum.
1
-
-
... More
Supply, installation, testing and commissioning of Surveillance / ESATA compatible Hard Disk of 4TB capacity to achieve the total storage for the NVR server
3
-
-
... More
Supply, Installation, Testing & Commissioning of 42 inch full HD LED monitor with resolution 1920X1080 pixel including wall mounting accessories (location: security room & central control room).Material shall be UL/CE listed
1
-
-
... More
Supply and installation of wall mounted 22U rack including cable manager, power supply units etc.to accommodate NVR, ethernet switch patch panel etc in control rooom
1
-
-
... More
Supply of the following sizes of Ladder Type FRP cable trays with vertical sides on both ends as per approved design and FRP supports with coupler plates spaced 300mm apart throughout the length as specified, including the cost of support hooks, fasteners, painting if required etc.( Contractor shall ensure to use corrossion free materials as support or fastening fittings)
-
-
-
... More
150mm(150x100x25)
300
-
-
... More
300mm(300x100x25)
260
-
-
... More
PA SYSTEM: Supply, installation, testing & commissioning of column speaker 6 watts
6
-
-
... More
Supply, installation, testing & commissioning of 6 watts ceiling speakers
42
-
-
... More
Supply, installation, testing & commissioning of voice alarm call Station with all cables and accessories
1
-
-
... More
Supply, installation, testing & commissioning of voice alarm keypad - Extension to voice alarm call station with all cables and accessories
3
-
-
... More
Supply, installation, testing & commissioning of voice alarm controller with all cables and accessories
1
-
-
... More
Supply, installation, testing & commissioning of voice alarm router with all cables and accessories
1
-
-
... More
Supply, installation, testing & commissioning of 480 W Booster Amplifier with all cables and accessories
1
-
-
... More
Supply, installation, testing & commissioning of DVD/MP3Player for audio playback only
1
-
-
... More
Supply, Installation, Testing & Commissioning of Paging Microphone, goose neck type
1
-
-
... More
Supply, laying and termination of Shielded Cat6 cable with all necessary accessories
320
-
-
... More
Supply, laying and termination of 2 Core x 1.5 Sq.mm Armoured Al.Mylar Screened FRLS Twin Twisted PVC Insulated cable along with all accessories. Accessories include cable glands, locknuts,saddle clips, cable tie & other hardwares to achieve cable termination and installation. Cable shall be terminated in speakers and amplifiers
3480
-
-
... More
Supply, installation, testing & commissioning of standard AV rack with 600mm Width, 800 mm Outer Depth and 36U Height
1
-
-
... More
DATA SYSTEM: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
-
-
-
... More
RJ 45 socket
78
-
-
... More
Supply and installation of Cat-6 shuttered 24 port patch panel
3
-
-
... More
SITC of 24 port unmanaged ethernet switch
3
-
-
... More
Supply and installation of 9U rack with Front glass door, Rear Perforated door with handle Lock & key. Front/Rear 19" mounting angles, top, bottom open, RAL 9005 with all other accessories
3
-
-
... More
AX3600 WIFI6 Dual Band Multi Band Multi Gigabt Ceiling Mount Access Point / EAP660HD
30
-
-
... More
Supply of the following sizes of Ladder Type FRP cable trays with vertical sides on both ends as per approved design and FRP supports with coupler plates spaced 300mm apart throughout the length as specified, including the cost of support hooks, fasteners, painting if required etc.( Contractor shall ensure to use corrossion free materials as support or fastening fittings)
-
-
-
... More
150mm(150x100x25)
140
-
-
... More
300mm(300x100x25)
100
-
-
... More
TELEPHONE SYSTEM: Supply,laying and termination of 20 pair telephone cable, 0.5mm copper PVC insulated,unarmoured telephone cable drawn in the existing cable tray
2600
-
-
... More
Supply,laying and termination of 20 pair telephone terminal block housed in engineering plastic box with transparent hinged door
12
-
-
... More
Supply,laying and termination of 10 pair telephone cable, 0.5mm copper PVC insulated,unarmoured telephone cable drawn in the existing cable tray
960
-
-
... More
Supply,laying and termination of 10 pair telephone terminal block housed in engineering plastic box with transparent hinged door
4
-
-
... More
Supply,installation,testring and commisioning of EPABX with the following specifications: 1.208 Analog Extensions with CLI Expandable to 512 Ports
2. 08 Port Analog trunk with CLI and Power Failure Transfer and with Protection modules.
3. 02 PRI.
4. 02 nos Operator Console with 30 Direct selection Keys each. 5. 08 Port Voice Guidance to announce Extension Busy status, Wake up call announcement and other important telephone features, Auto Attendant facility for Welcome message announcement.
6. 02Nos -500 pair MDF(wall mountable)
7. 01 No. Call Billing and monitoring Software.
8. Charger/UPS with Batteries for backup of 1 hour.
1
-
-
... More
Supply of the following sizes of Ladder Type FRP cable trays with vertical sides on both ends as per approved design and FRP supports with coupler plates spaced 300mm apart throughout the length as specified, including the cost of support hooks, fasteners, painting if required etc.( Contractor shall ensure to use corrossion free materials as support or fastening fittings)
-
-
-
... More
150mm(150x100x25)
50
-
-
... More
300mm(300x100x25)
50
-
-
... More
NURSE CALLING SYSTEM: Supply, Installation, Testing & Commissioning of Patient Handsets - type with wired console unit
45
-
-
... More
Supply, Installation, Testing & Commissioning of Toilet Pull Cords with all the necessary accessories for the installation.
32
-
-
... More
Supply, Installation, Testing & Commissioning of Light Modules with all the necessary accessories for the installation.
32
-
-
... More
Supply, Installation, Testing & Commissioning of Nurse Station Terminals with all the necessary accessories for the installation.
6
-
-
... More
Supply, Installation, Testing & Commissioning of system switch communiction accessories
6
-
-
... More
Supply, Installation, Testing & Commissioning of management software alongwith workstation
1
-
-
... More
QUEUE MANAGEMENT SYSTEM: SITC of Queue Management System Consisting of multi function queue ticket printer with touch screen kiosk type diplay , Voice Unit & Customer Identification devices, High Resolution GUI display in multi languages, support wireless networks, durable printer, supports alpha numeric numbering system
1
-
-
... More
Display system with 24" LCD Monitor, with audio speaker arrangement, HDMI Cabling
4
-
-
... More
Workstation counters
4
-
-
... More
Browsers/ Softwares and inclusive of testing, commissioning and training to treasury officers for Queue management system by OEM.( Necessary softwares& hardwares required for the effective functioing of QMS)
1
-
-
... More
LIFT
-
-
-
... More
20BED LIFT Equipement Details : Machine Roomless - Gearless No. of Unit : One Controller Type : Micro Processor Based VVVF Capacity in Kgs/Persons : 1360Kg/20P Speed in MPM : 60mpm/1.0mps Door Opening Type : Centre Opening Sliding Door Operation : Simplex No.of Stops : 4 (G,1,2,T) No.of Openings : 4 (G,1,2,T) Storey Served Front : 4 (G,1,2,T) Travel (mm) : 12700mm Hoistway Size (mm) : 2400 (w) x 3000 (d) Cabin Dimemnsions (WxDxH) (mm) : 1300x2400x2350 Pit Depth (mm) : 1500 Overhead (mm) : 4250 Entrance Dimensions (mm) : 1200x2100 Ceiling : SS Honeycomb finish with LED Downlight Car Front/Rear/Side Panel : SS Honeycomb finish Handrail : 38mm dia Car Doors : SS Honeycomb finish Car Flooring : Vinyl Tile Floor Thickness : 1.5mm Thick Vinyl Tile Car Sill : Extruded Hard Aluminium Entrance Frame/Landing Doors : SS Honeycomb finish
2
-
-
... More
DUMBWAITER
1
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:
17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
6
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
6
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-
(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Make: Jaquar, Kohler, Grohe, Cera high end series.
28
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
17.7.9 White Vitreous China Surgeon Type wash basin of size 660x460 mm with single 15 mm C P. brass pillar taps with elbow operated levers ISI marked
41
-
-
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern Make: Jaquar, Kohler, Grohe, Cera high end series.
15
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
17.7.7 White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap
20
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
118
-
-
... More
Providing and fixing stainless steel toilet paper holder. Make: Jaquar, Kohler, Grohe, Cera high end series.
72
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore. Make: Jaquar, Kohler, Grohe, Cera high end series.
8
-
-
... More
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms
70
-
-
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
118
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm Make: Jayana, Nirali, Carysil high end series.
20
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
17.7.10 Stainless Steel AISI - 304 ( 18/8/) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap.
8
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore Make: Jaquar, Kohler, Grohe, Cera high end series.
261
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC SDR 11) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall (Above ceiling and Ducts)
-
-
-
... More
15 mm nominal outer dia Pipes
245
-
-
... More
20 mm nominal outer dia Pipes
465
-
-
... More
25 mm nominal outer dia Pipes
710
-
-
... More
32 mm nominal outer dia Pipes
812
-
-
... More
40 mm nominal outer dia Pipes
420
-
-
... More
50 mm nominal outer dia Pipes
645
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
Make: Astral, Supreme, Finolex, Prince
-
-
-
... More
20 mm nominal outer dia Pipes
654
-
-
... More
25 mm nominal outer dia Pipes
150
-
-
... More
Providing and supplying ISI mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of PN 10 and 50 mm diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.
18
-
-
... More
Providing and supplying ISI mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of PN 10 and 65 mm diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.
4
-
-
... More
Providing and supplying ISI mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of PN 10 and 80 mm diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.
2
-
-
... More
Providing and supplying ISI mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of PN 10 and 100 mm diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.
2
-
-
... More
Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.Y- Strainer of Ductile of 50 mm dia
1
-
-
... More
Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.Y- Strainer of Ductile of 65 mm dia
1
-
-
... More
Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia.
4
-
-
... More
Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 50mm dia.
6
-
-
... More
Excavation for foundation/utility services upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff with all lead and lift.(E) Hard Rock
220
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering. (Ramping by manual or mechanical means)
220
-
-
... More
Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type (make-Local )
28
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-
(a) White Vitreous China Wash basin counter top type 550x420 mm with a 15 mm CP Brass single hole basin mixer
. Make: Jaquar, Kohler, Grohe, Cera high end series.
29
-
-
... More
Fixing, Testing and Commissioning at site Wall Mounting type water closet with P trap & its all fittings like rag bolts, solid plastic Seat cover etc complete including cutting and making good the walls and floors wherever required, Concealed flushing cistern with brass screws, nuts , and washers complete including cutting and making good the walls and floors wherever requiredEtc complete.Queo - (Zelos Neo+CC Sisma)/ KOHLER ESCALE K16817IN-SS-0, OR Equ.
60
-
-
... More
Providing, Fixing, Commissioning at site Urinal Partition with Curved shaped frosted glass fixing with brass screws, nuts , and washers complete including cutting and making good the walls and floors wherever requiredEtc complete. 900x450x10 mm tk. Make: Jaquar 1110uc/ equ.
12
-
-
... More
Providing and fixing of grab bars 300 mm Stainless steel in physically disabled toilet including all necessary fitting, SS Screws & Accessories etc.Complted in all manners and satisfied to of EIC. complete. Make: Jaquar,
Kohler, Grohe, Hindware, Cera high end series.
16
-
-
... More
Providing and fixing of grab bars Vertical Swing 18-8 S, type-304, 18-gauge (1mm) stainless steel tubing with satin-finish. 1–1/4 (25mm) outside diameter wall mounted in physically disabled toilet including all necessary fitting, SS Screws & Accessories etc.Complted in all manners and satisfied to of EIC.complete. Make: Jaquar, Kohler, Grohe, Hindware, Cera high end series.
16
-
-
... More
Providing, Fixing, Testing and Commissioning at site ablution Health Spray Faucet with wall hook and 1.2 mtr. Chrome plated PVC hose pipe, etc. complete in all respects. Queo - Addons/Kohler/Grohe/jaquar
72
-
-
... More
Providing, Fixing CP Robe hook: Queo - / KOHLER/Grohe ,jaquar OR Equ.
72
-
-
... More
Supplying,Fixing, Testing, and commissioning Sink tap wall mounted/floor mounted with swivel casted spout and wall flange, trending cutting and making good the walls whatever required etc. complete Queo - Allamoda/jaquar/Kohler/Grohe
20
-
-
... More
Providing and Fixing of Stainless Steel Hand Dryer with all required connections and following specifications. Weld-free cover fixed to the base with two safety screws and lock withspecial speedflow key. Aluminium base. Includes silent-blocks to damp mechanical vibrations. Fire resistant plastic UL 94-V0 fan scroll. High-speed motor with safety thermal cut-off.The motor revolutions canbe adjusted manually by the potentiometer. • Aluminium centrifugal double asymmetrical inlet fan wheel. Disconnects automatically after 60 seconds of continuous use. Electronic infrared detection sensor. Adjustable detection by potentiometer(5- 25 cm). Ultra-flat: 10 cm deep (complies with ADA regulations). complete. Make: Jaquar, Kohler, Grohe, Hindware, Cera high end series.
6
-
-
... More
Providing and fixing wash basin with 4 Faucets 16 SWG SS 304 HL- Finish Top, with 16 SWG SS 304 leg channel to support legs for increased hygiene and strength compared to angle framework; 40X40 mm SS 304 16 SWG square tube legs; Height adjustable high quality nylon bullet feet; SS 304 custom made sink.SS 304 20SWG HL-finish 25x25mm square tubular cross supports.size-250*55*35 cm
3
-
-
... More
Providing and fixing Gyser 20 Ltr with flexible connection fittings arrangement etc. complete of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels.
2
-
-
... More
Supplying, Fixing, testing and commissioning at site in position uPVC pipe -6kg/cm2) (IS:4985) Solvent Welded fittings with bosses where required e.g. tees, bends, coupling, door bends, junctions, cowls, door TEE , Door Elboe where ever required etc., complete. (Soil & Waste in Shaft) Make: Astral/Supreme/Ajay
-
-
-
... More
110 mm O.D. (6Kgf/cm2 IS:4985)
366
-
-
... More
75 mm O.D.(6Kgf/cm2 IS:4985)
140
-
-
... More
63 mm O.D ( 4Kgf/cm2) Vent pipe in shaft
160
-
-
... More
Providing, Fixing, testing and commissioning at site in position uPVC pipe ( IS : 4985 ) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, coupling, etc. complete. (For Rain water pipes in shaft & Ceiling) Make: Astral/Supreme/Ajay
-
-
-
... More
110 mm O.D ( 4Kgf/cm2)) Rain water pipe in shaft
515
-
-
... More
Supplying, Fixing, testing and commissioning at site in position u PVC pipe of 6Kgf/cm2including PVC fittings with bosses where required e.g. tees, bends,door TEE , Door Elboe where ever required coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts ,washers, wherever required etc. complete.Make: Astral/Supreme/Ajay
-
-
-
... More
50 mm O.D. (6Kgf/cm2 (IS:4985)
90
-
-
... More
75 mm O.D. (6Kgf/cm2 (IS:4985)
480
-
-
... More
110mm O.D (6Kgf/cm2 (IS:4985)
768
-
-
... More
32 mm O.D. (8Kgf/cm2 (IS:4985) for sunken spout
34
-
-
... More
Supplying, Fixing, testing and commissioning at site in position Deep Seal UPvc fabricated Multi floor trap (4”), with suitable supporting on GI slotted rails (1.6mmthick) full threaded rod, anchor fasteners etc. complete in all respects.
50/75 mm dia outlet (In Ceiling)Astral/Supreme/Ajay
113
-
-
... More
Supplying,Fixing, testing and commissioning at site in position UPvc fabricated Multi floor trap (7”), with 50/75 mm dia outlet (In Sunken slab & floor raising areas)Astral/Supreme/Ajay
21
-
-
... More
Supplying,Fixing, Testing and commissioning at site in position 150x150mm square C.P cast brass or stainless steel anti cockroach grating cover ss (304) of matching size of UPvc fabricated floor trap / multi inlet trap complete in all respects. Chilly/Eligna/
134
-
-
... More
Supplying,Fixing, Testing and commissioning at site in position 150x150mm square C.P cast brass or stainless steel sealed grating cover ss (304) of matching size of UPvc fabricated floor trap / multi inlet trap complete in all respects. Chilly/Eligna/ in common toilets
10
-
-
... More
Supplying,Fixing, testing at site in position 160mm dia square /circular grating Terrace rain water outlet (Cast Iron)(for 110mm dia pipe)
18
-
-
... More
Supplying, Fixing, testing at site in position PVC Roding Eye (6kg/cm2) Complete in all respects.
-
-
-
... More
110 mm dia
6
-
-
... More
75 mm dia
6
-
-
... More
Providing and fixing in position cowel went to pipes.(C) 100mm dia
45
-
-
... More
Providing, Fixing at site in position uPVC Pipes (as per ASTM D – 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft)
-
-
-
... More
1 ¼ “ (32mm) dia.
40
-
-
... More
1 1/2 “ (40mm) dia.
80
-
-
... More
2” (50mm) dia (External / in Shaft)
140
-
-
... More
2 ½” (65mm) dia (External / in Shaft)
30
-
-
... More
Supplying,Fixing at site in position full way lever operated forged brass gate valve of brass body with forged brass hard crome plate (PN 10) of approved make with necessary MTA fittings in position as per drawings
-
-
-
... More
½ ''(15mm) dia.Globe valve
29
-
-
... More
¾ ''(20mm) dia.
155
-
-
... More
1” (25mm) dia
44
-
-
... More
1 ¼ “ (32mm) dia.
16
-
-
... More
1 1/2 “ (40mm) dia.
8
-
-
... More
2” (50mm) dia
10
-
-
... More
Supplying, Fixing, testing and commissioning at site Puddle Flange fabricated from Upvc ASTM Grade sch-40 pipes & uPVC sheet (600 mm long)
-
-
-
... More
1 ½” (40mm) dia (External / in Shaft)
2
-
-
... More
2” (50mm) dia (External / in Shaft)
4
-
-
... More
2 ½” (65mm) dia (External / in Shaft)
4
-
-
... More
3” (80mm) dia (External / in Shaft)
6
-
-
... More
4” (100mm) dia (External / in Shaft)
4
-
-
... More
6” (150mm) dia (External / in Shaft)
1
-
-
... More
Supplying, Fixing, testing and commissioning at site Puddle Flange fabricated from GI pipe with 6mm tk plate (600 mm long) for FIRE Tank
-
-
-
... More
6” (150mm) dia -GI , single side flange
2
-
-
... More
8” (200mm) dia -GI , single side flange
2
-
-
... More
Supplying and Laying of pipes and conveying to position; cleaning, laying and jointing to true lines and gradients, with proper bedding uPVC pipe of IS 4985(6kgf/cm2) including jointing the pipe as per specification, testing the pipe line after installation all per provisions of IS: 1742-1983 (Code of practice for building drainage) complete as directed by the Employer 160 mm OD (6/kg/cm2)
160
-
-
... More
Providing and supplying of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete.(ID 150 mm
diameter) Make: Astral, Supreme, Finolex, Prince
-
-
-
... More
160 mm OD (6/kg/cm2)
460
-
-
... More
200 mm OD (6/kg/cm2)
280
-
-
... More
Supply, installation, testing and commissioning of percolation well (Recharge well) including all work like drilling, compressor work, gravel packing, mud slurry disposal, clay packing and including of all materials like 300mm UPVC pipe, 300mm wire screens, 300mm collar joint, accessories, gravels, sand, sand filteration module etc. Site cleaning, mud pit, mud refilling for borewell must be in the contractor's scope. Contractor has to maintain the percolation well upto three years after installation.
4
-
-
... More
Supply,Installation, Testing and commissioning of Clear water transfer open well submerssible pump of adiquate hp with discharge 3 lps at 20 mtr head, SS body, ss shaft with bronze impeller mounted on a single base plate with controll panel and auto level controller.1 working+ 1 stand by
2
-
-
... More
TERRACE DWS BOOSTER PUMP Duty Conditions of 6 lps @ 35 mtr - head(Each pump 3LPS 35 mtr Head - 2 Pump system-1 Working+1standby) Compact skid mounted Booster pumps with SS 304 casing, SS316 impeller , SS316 shaft , C I base and TEFC motor with mechanical seal. Pump to be have single VFD logic controller. - Electric control panel with logic controller, relays, calibrated pressure switch, pressure transmitter including cabling within panel, incorporating dry run protection, potential contacts for BMS integrating , sucton and discharge headers, pressure vessal 60 ltr capacity.
1
-
-
... More
Supplying and fixing of Borewell /tube well submerssible pump with panel, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts, pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency along with pump protection starter with in built level controller for automatic operation of pumpset using float switch , The panel should have LCD screen showing Voltage / Ampere, Error log , Cascading operation , Pump run status , Auto faulty pump change over, Auto- Manuel selection etc . The panel should protect the pumpset from over and under voltage , over and under load, dry protection , Phase reversal protection , Single phase prevention etc including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer-in-Charge at all levels
Capacity : 7m3/hr
Head : 55 m
1
-
-
... More
Supplying and fixing of Horizontal open well SUBMERCIBLE pump(1W+1S)ug to oht, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts, pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency along with pump protection starter with in built level controller for automatic operation of pumpset using float switch , The panel should have LCD screen showing Voltage / Ampere, Error log , Cascading operation , Pump run status , Auto faulty pump change over, Auto- Manuel selection etc . The panel should protect the pumpset from over and under voltage , over and under load, dry protection , Phase reversal protection , Three phase prevention etc -
Capacity : 24 m3/hr
Head : 32 m
4
-
-
... More
Fixing, testing and commissioning at site Automatic Dewatering system having 2 nos (1w+1s) Vertical Bottom suction submersible pump Having CI: body / Ci: impeller / SS : shaft . Each pump should be capable to deliver 3 lps @ 8mtr , having 0.75 kw /1hp / 3phase motor . A wall mounting micro controlled automatic control panel should be provided for the working of pumpset as 1w+1s in cascading operation . The control panel should have LCD screen showing Voltage , Ampere , Pump running status , error logs, faulty pump indication etc. The panel should protect the pumpset from over and under voltage , over and under load , dry run
, etc . Automatic operation of pumpset should be with float switch.(deliver pipeline size : 40mm )(Basement Pit )
2
-
-
... More
Supply, Installation, Testing & Commissioning of 14,000 Lpd Water Treatment Plant with Reverse Osmosis Process with all mechanical work like piping, mechanical components as follows but excluding the electrical works and civil work. a) PAC off Chlorine Dosing system -1nos,Pressure sand filter FRP-1 no ,Activated carbon filter FRP-1no,
1
-
-
... More
40 KLD Fiber reinforced tank (FRP) With Modular Membrane Bioreactor (MBR) based Sewage Treatment Plant, Design Flow KLD 60.0 LPH 2000.0 Type Fully-Automated, Design MLSS mg/L 6000.0 – 8000.0.Membrane Membrane Bioreoctor (MBR) to provide an advanced level of organic and
suspended solids removal with 0.4 Microns pore isze, provides high filtrate quality. Operating Hours h 24.0, Design Flexibility % 30 - 100 with transfer pumps, air blowers, medias, membrine, tube settlers and all connected pipe lnes and necessary power connections and cubicle control panel in all respect. 3 years operation and maintanance of Sysytem is included,OUTLET Results Parameter Unit Outlet Value
pH - 6.5-8.5
TDS mp/I 2100
TSS mp/I 20
BOD5 mp/I 10
COD mg/I 50
Total Nitrogen mp/I 5
Phosphorus mp/I 5
Ammonia Mp/I 5
Fecal Califorms MPN/ml Less than 1000
1
-
-
... More
Incinerators with capacity of 150 kl per day include air pollution control equipment (e.g., fabric filters, scrubbers, electrostatic precipitators) to remove fly ash and gaseous contaminants
1
-
-
... More
Supply, installation, testing and commissioning of 1200 LPD Solar Water Heater with Heating coile Control panel with necessary controls, and other standard accessories as instructed by S-I-C.
1
-
-
... More
Supply, installation, testing and commissioning of Recirculation pump, Inline pump with SS body with 2lps @18 meter head with standard solinoid valves, necessary piping and other standard accessories as instructed by S-I-C.
1
-
-
... More
Providing, fixing, jointing and testing, heavy quality cast steel / Brass Air Release Valve designed of approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as per I.S 5212 approved by the Engineer-in-charge for water supply lines of the following nominal bore (NB)
size: 20mm diameter. Make:ZOLOTO/VTC/SANT
36
-
-
... More
Constructing Brick masonry road Inspection chamber 450mm x 450mm x 775mm with horizontal grating complete. C. M. 1:6. Foundation concrete 150 mm thick in C. C. 1:4:8 of trap metal size 25 mm to 40 mm thick, inside cement plaster in C. M. 1:3 and cement pointing outside in C. M. 1:3 and ms gratings on top. Upto 1 Mt. depth from G. L. to pipe invert level incl. complete civil works but excl. cost of excavation and refilling, with cast in situ RCC slab in one single piece with fixing of CI-MH Frame and cover (incl cost of CI-MH Frame and cover) with 23 mm thick brick masonry wall in C.M.1:6. With precast slab in two parts 15mm. for rain water/storm water drainage
24
-
-
... More
Construction of Manhole chambers(Inspection chambers) 600mm X 600 mm and depth 1.0 m in brick or bela stone masonry, locally available in C. M. 1:6. Foundation concrete 150 mm thick in C. C. 1:4:8 of trap metal size 25 mm to 40 mm thick, inside cement plaster in C. M. 1:3 and cement pointing outside in C. M. 1:3 and top cover of precast RCC slab 100 mm thick (with key hole in two parts, each with handles or MS Bar etc. complete as given size) Upto 1 Mt. depth from G. L. to pipe invert level incl. complete civil works but excl. cost of excavation and refilling, with cast in situ RCC slab in one single piece with fixing of CI-MH Frame and cover (incl. cost of CI-MH Frame and cover) with 23 mm thick brick masonry wall in C.M.1:6. With precast slab in two parts 15mm.
61
-
-
... More
Extra over items above for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick masonry chamber.(i)
15
-
-
... More
Providing and fixing C.I. cover with frame (Medium duty) 600x600 mm , total weight of cover and frame to be not less than 108kg FOR SUMP TANKS
12
-
-
... More
Providing and fixing C.I. cover with frame (Light duty) 600x600 mm , total weight of cover and frame to be not less than 23 kg for OHT
6
-
-
... More
Supply, installation,testing and commissioning of Grease Chamber round type having capacity of 400-750 litter. The separator for greasy wastewater is suitable for installation in the ground and comes without metallic components in the tank. The collecting tank made of permanently resistant polymer (PE) is equipped with an integrated sludge trap and has a rounded base for fast and clean disposal. Access for cleaning and maintenance work is possible via one or several service access covers. A direct disposal pipe socket shall be available for odour-reduced manual disposal. A load distribution slab must be installed on site for load class D. The reinforcement shall be provided as per OEM specification . installation depth 550-900 mm,net weight not less than 130 kg and gross wight not leass than 137 kg
1
-
-
... More
Supply and fixing of DRAINAGE GRATING WITH
TROUGH, 30x30x8+10
• Trough using 1 mm thick 304
grade #4 stainless steel
• Grating using 2 mm thick 304
grade #4 stainless steel
3
-
-
... More
Supply and fixing of DRAINAGE GRATING WITH
TROUGH, 60x30x8+10
• Trough using 1 mm thick 304
grade #4 stainless steel
• Grating using 2 mm thick 304
grade #4 stainless steel
4
-
-
... More
Providing, Supply, installation,testing and commissioning of UPVC Oil Waste system conforming to DIN-EN-12056 & DIN-1986-100 fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offSet and other specials. Jointing shall be done with pushfit EPDM ring jointing technique in general. Solvent cement joints may be provided for fittings and specials which are not manufactured with pushfit rubber joints. Pipes may be laid / fixed in sunken floors, under slung from ceiling. The pipes laid in sunken floor shall be encased with 75 mm thick cement concrete (1:2:4) all around. The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good the same as per specifications.
-
-
-
... More
75mm Dia
20
-
-
... More
110mm Dia
24
-
-
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
Make: Safeguard, Minimax, New Age
16
-
-
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
Make: Safeguard, Minimax, New Age Stainless Steel (Grade 304)
16
-
-
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
Make: Safeguard, Safefire, Minimax, New Age
16
-
-
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585
20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
and tested to 1.2 MPA( 12 Bar pressure) installation brackets, complete in all respects including all accessories as required for complete installation. INLET PIPE CONNECTION FROM RISING MAINS TO HOSE REEL SHALL BE PROVIDED WITH GI HEAVY CLASS PIPES WITH UNIONS OR WITH READY MADE TYPE FLEXIBLE RUBBER HOSE IN STANDARD LENGTH, HYDRAULICALLY FITTED END CONNECTIONS ETC .Make: Monsher, Minimax, New Age
10
-
-
... More
Supplying and fixing of 4 Way fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
Make: Safeguard, Safefire, Minimax, New Age
1
-
-
... More
Supplying and fixing of 2 Way fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
Make: Safeguard, Safefire, Minimax, New Age
1
-
-
... More
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Note : Pipes up to and 50 mm dia shall be socket welded with DI fittings. For pipes inside the Fire pump room
-
-
-
... More
25 mm dia
5
-
-
... More
80mm dia
5
-
-
... More
100 mm dia
15
-
-
... More
150 mm dia
15
-
-
... More
200 mm dia
10
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : Make : Leader/ Audco/ Zoloto
-
-
-
... More
80 mm dia
4
-
-
... More
100 mm dia
6
-
-
... More
150 mm dia
3
-
-
... More
200 mm dia
2
-
-
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : Make : Leader/ Audco/ Zoloto
-
-
-
... More
150 mm dia
1
-
-
... More
100 mm dia
4
-
-
... More
80 mm dia
1
-
-
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
Make : Leader/ Audco/ Zoloto
-
-
-
... More
100 mm dia
1
-
-
... More
200 mm dia
2
-
-
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. Set
1
-
-
... More
Supply, installation, testing and commissioning of Brass Air release valve, size 25mm with threaded inlet & provided with ball type float complete with all accessories required for complete installation. Make : Leader/ Audco/ Zoloto
2
-
-
... More
Supply, installation, testing and commissioning of industrial type pressure switch having 1/4" BSP(F) connection IP:32 enclosure protection, phosphor bronze bellows as sensing element, SDPT contact system, switch rating 6A Inductive/lOA resistive 380 V AC, 0.2A Inductive/10A resistive 250V DC suit with ball valve etc. complete as required. Make: Infoss/
3
-
-
... More
Providing, fixing, testing & commissioning of
installation control valve of cast iron body,
brass/bronze working parts comprising of water motor
alarm, bronze seat clapper, clapper arm and
hydraulically driven mechanical gong bell to sound
continuous alarm when the wet riser/sprinkler system
activates, pressure gauges, emergency releases,
strainer, pressure switch, cock valve complete with
drain valve and bypass, test control box, ball valves,
MS pipe of required size, flanges, orifice plate, gasket
etc of follwing sizes as required :
-
-
-
... More
150mm Dia
1
-
-
... More
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all
respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads. Make : Kirloskar, Mather & Platt India Limited
-
-
-
... More
1620 lpm at 56 m Head Set
1
-
-
... More
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. Pump – Pump Casing : C.I, Impeller- Bronze impeller. 180 lpm at 56 m Head Set. Make : Kirloskar, Mather & Platt India Limited
1
-
-
... More
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts
electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. Engine panel, Sealed maintenance free batteries of 24 V, 88 AH, Exhaust pipe of required length with asbestos lagging, muffler, Day oil tank of 400 lts with first charge and manual oil pump set. No. of stage preferred - Single / Double,
-
-
-
... More
The pump shall be of the following specifications: Discharge - 1620 lpm, Head - 56 m, Speed RPM -1450, Mover - Diesel engine driven, Material of construction, a) Impeller - Bronze, b) Casing - C.I., c) Shaft & Shaft Sleeve - SS-410, d) Bearing - Grease Lubicated, e) Seal & Make - Mechanical, Type of pump - End Suction. 1620 lpm at 56 m Head Set Make : Kirloskar, Mather & Platt India Limited
1
-
-
... More
Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :
-
-
-
... More
Details of requirements given in specs. INCOMING 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector swtich & CTs etc.LED type RYB phase indicating lamps, ON, OFF, trip
indicating lamps Set of Copper Bus Bar 300A OUTGOING
( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)
Main Fire Pump
125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
Jockey Pump
63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. DIESEL ENGINE CONTROL
Control for diesel engine comprising -Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode
Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter. All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and
commissioning of system controller to control operation
of main electric fire pump, diesel pump, Pressurization
pump, Terrace pump in sequence as per specification
consisting of relays, timers. Sensors, annunciation
window for fault indication, complete as per
specification Following provisions to be made in the fire panel: Facility for mode selection ie auto or manual test & local/remote. Protection failure & control cabling. Panel shall be interlocked in such a way when fire pump starts on pressure drop in the header, supply to working chiller A/c panel is disconnected. Remote indication of ON/OFF/TRIP shall be provided through potential free contact.
1
-
-
... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : working pressure 175 PSI (UL/FM approved) as required for complete installation as required.
Make: Tyco/Viking/Sharp
-
-
-
... More
Pendent Type bronze finish with C.P. brass rossett flange
389
-
-
... More
Up right Sprinkler
364
-
-
... More
Extended Coverage Side wall type sprinkler( apartment Inside)
83
-
-
... More
Pre-assembled, ready to install, flexible connectors, stainless steel hose lengths: 1000mm,Mounting bracket , Maximum Working Pressure: 200 psi , Minimum Bend Radius UL Listed /FM Approved
220
-
-
... More
Providing and fixing GI heavy duty 'B' class (IS: 1239 Part-1) including cutting, welding etc. and providing all fittings viz. Flanges. Bends,Tees, Elbow, Reducers, Clamps. Hangers etc. including cutting holes and chases in brick or RCC walls/slabs and making good the same to the approval of engineer/consultant complete including painting with one coat of primer and two or more coats of enamel paint of approved make and shade including steel work, GI pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls / floors and sealing the sleeves with glass wool in between & fire sealant compound at either end all as per Project Manager’s requirements including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects. Note : Pipes up to and 50 mm dia shall be socket welded with DI fittings.
-
-
-
... More
25 mm dia
390
-
-
... More
32 mm dia
383
-
-
... More
40 mm dia
237
-
-
... More
50 mm dia
273
-
-
... More
65 mm dia
265
-
-
... More
80 mm dia
314
-
-
... More
100 mm dia
226
-
-
... More
Supply, installation, testing and commissioning of electrically operated water flow switches (Vane type) dia 65 mm including tamper switch and accessories, complete with tap off socket arrangement as required, with potential free contact with 2 Nos. NO/NC including all accessories as required for complete installation. HD/ Honeywel
-
-
-
... More
In 100mm line
9
-
-
... More
Supply, Installation, Testing and Commissioning of Fire alarm control panel capable of handling 99 devices / detectors per loop to meet the NFPA Standards and UL approvals. 2 loop Panel should be expandable, with a battery backup in normal condition and in alarm condition. The panel should be expandable. Make: Honeywell/Edward/Essar/Cooper
2
-
-
... More
Supply, Installation, Testing and Commissioning of Intelligent Addressable Heat Detector with base. The detector shall be suitable for both rate of rise and fixed temperature. Make: Honeywell/Edward/Essar/Cooper
6
-
-
... More
Supply, Installation, Testing and Commissioning of Intelligent Addressable Multi Sensor with optical smoke element and thermal element. Make: Honeywell/Edward/Essar/Cooper
326
-
-
... More
Supplying, installation, testing & commissioning response indicator on surface/ recess MS box having two LEDs metallic cover complete with all connections etc. as required
10
-
-
... More
Supply, Installation, Testing and Commissioning of analogue addressable type Manual pull station at indicated locations with necessary termination as per the specifications and full ready for operation. Make: Honeywell/Edward/Essar/Cooper
10
-
-
... More
Supply, Installation, Testing and Commissioning of addressable sounder at different locations complete with all fixing accessories. Make: Honeywell/Edward/Essar/Cooper
10
-
-
... More
Supply and laying of 2C X 1.5 Sqmm Armoured copper conductor cable FRLS with all necessary saddles and other accessories. Make: Finolex/Polycab/Havells/KEA
3200
-
-
... More
Supply, Installation, Testing and Commissioning of Short Circuit Isolator Module for isolating the affected segment of the circuit, allowing the remaining devices to continue operation. Make: Finolex/Havells/Polycab
25
-
-
... More
10 zone control panel for fire alarm system with following:- 250 Watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required 2 Nos. (one to act as standby) Talk back master station with LED PTT (Press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit 1 set.
Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required 1 Set. Amplifier change over switch for inter changing amplifier 1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required 1 No. Gooseneck microphone with stand and ON/OFF
switch 1 No. Mains ON/OFF switch, fuse indication lamps,
DC and AC voltMetres & Ammetres terminal blocks etc. complete as required 1 Set. Battery charger trickle cum boost to take complete
load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos.12 volt, 60 AH each sealed maintenance free batteries
1
-
-
... More
Supplying, installation, testing & commissioning talk back slave station in surface/ recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/ microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required.
10
-
-
... More
Supply, installation testing and commissioning of 20mm. PVC Rigid Conduits conforming to IS and specification, on walls / ceiling / floor etc. complete with all accessories like junction boxes, collars, bends etc. Make: ISI Marked
320
-
-
... More
Supply, install, test and commission 2C x 1.0 mm PVC cable. Make: Finolex/Havells/Polycab
640
-
-
... More
Supply and installation of Weather proof Outdoor type hose cabinets fabricated from 14 SWG M.S. sheet with full glass door with locking arrangement (Water Proof), suitable to accommodate 2 nos.15 M long hose and 1 No branch pipe. Glass will be transparent Acrylic - 3mm thick. The cabinet shall be painted with coat of P O Red paint from outside and white paint from inside including all accessories as required for complete installation.(size shall be such that the above all items can be accommodated). (Double door type) as per industrial standards
6
-
-
... More
Supplying, laying, fitting and fixing , testing and commissioning of under ground GI heavy duty 'C' class pipe confirming to IS 1239 The pipes shall have anti-corrosive wrapping coating and a wrapping treatment with pipe coat 4 mm thickness, after applying one or more coats of Asphalt primer. Rates shall include cutting, welding etc. bends, elbows reducers suitable for pipe joints, clamps and all other accessories including excavation of earth to sufficient depth to install the pipes, the pipes buried in ground excavation and refilling etc.as per the specification and as required complete as required for complete installation etc. including cutting holes in RCC walls/slabs and making good the same adequately supported on rigid supports duly painted as required complete in all respect including all up to building rising mains and for yard hydrants ,
-
-
-
... More
100 mm dia
368
-
-
... More
80 mm dia
20
-
-
... More
Supply & installation of Pressure Gauge with 0-300 psi (0-21Kg/Sq.CM) range white background, black graduation scale with dual reading in Kg/Sq.CM & PSI, 1/4" BSPT bottom entry 100 MM dial, PHOSPHOROUS BRONZE bourden tube, brass moving parts, polished stainless steel case with positive seal against weather, moisture & dust, hardened glass, glycerine filled type with syphon tube and isolation cock,Make: Fiebig / H guru
4
-
-
... More
Providing & fixing double flanged flexicon rubber expansion joint with unit control of standard length as per manufacturers specifications suitable for working pressure rated (PN16) and test pressure to be 150 % rated pressure of including rubber gaskets, flanges, nuts, bolts and washers complete as required
-
-
-
... More
100 mm dia
4
-
-
... More
80 mm dia
2
-
-
... More
Supply and fixing Co2 type Fire Extinguisher of capacity 4.5 kg filled with Co2 Gas with control discharge mechanism ( squeeze grip type) fitted with Bend and Horn applicable on Class B and C class of fire. Manufactured and marked to IS 15683 with ISI marking and cylinders having the approval of Chief Controller of Explosives, and including all accessories as required for complete installation.
10
-
-
... More
Supply and fixing of dry chemical powder type (DCP) fire extinguishers (ABC Type) of 4 Kg capacity, Pressurized with nitrogen, mfg. to IS:15683 with ISI mark fitted with pressure gauge, GM cap nozzle complete with initial charges and installation brackets and screws with ISI marks etc. complete as approved and instructed by the engineer in charge including all accessories as required for complete installation..
22
-
-
... More
Supply and fixing of Modular type automatic extinguishers with Clean Agent Gas Fire Extinguisher mainly consist of MIG welded M.S. body 2 mm CRC Sheet upper part of which is fitted with adapter or Flange for fixing on ceiling wall. And below part fixed automatic release Nozzle based on Sprinkler technology unlike the Sprinkler Nozzle is gas tight the release temperature is adjusted with sprinkler imported bulb set at 57 0 C, or 680 C or special temperatures according to specific requirements and imported pressure gauge fitted for insta nt verification of reliability of every unit.
12
-
-
... More
Supply and fixing emergency exit light fixture with battery back up unit, LED Lamps, indicating Fire Exit, recess / mounted type. 24hrs x 7days working conditional.
26
-
-
... More
Supplying and installing of in position the various type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Non-reflective self adhesive vinyl painted foam board, complete with mirror fasteners. Size : 60cm x 15cm
30
-
-
... More
Supplying,Fixing at site in position full way lever operated forged brass Ball valve of brass body with forged brass hard crome plate (PN 10) of approved make with necessary MTA fittings in position as per drawings
-
-
-
... More
1” (25mm) dia
16
-
-
... More
2” (50mm) dia
10
-
-
... More
Supplying,Fixing at site in position full-3 way lever operated forged brass Ball valve with sight viewb glass (test and drain ) of brass body with forged brass hard crome plate (PN 10) of approved make with necessary MTA fittings in position as per drawings
-
-
-
... More
2” (50mm) dia
9
-
-
... More
VRF/VRV UNITS: Supply, Installation ,testing and commissioning of the following minimum capacity Air-cooled VRF (Variable Refrigerant Flow) Outdoor unit with variable speed inverter driven multiple compressors complete with suitable capacity drive motors conforming to IE3 as per IS 12615, air cooled condenser, R410A refrigerant, oil separator, with all accessories, and safety devices like thermal protector, pressure relief valve, high-low pressure cut off etc . Necessary structural supports, ODU vibration isolators shall be considered . Equipment shall be suitable for 3 phase, 415 V, 50Hz supply along with suitably rated starter panel & associated accessories, suitable interconnecting control cabling between IDUs, ODUs ,power cabling between isolator and single/multiple outdoor units along with associated electrical accessories. Required supports including structural supports /RCC/ cement concrete foundation shall be included as part of equipment . COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5. The efficiency of the equipment shall meet ECBC/ASHRAE latest standards etc. complete in all respects as per the technical specifications.(single feeder power source will be provided for outdoor units).
All the structural corrosion resistant structural supports/concrete pedestals for mounting indoor/outdoor equipment's shall be included.
Gas charging with refrigerent R 410 A shall be included at sufficient quantity recommended by the manufacturer. (Complete in all respects as per technical specification)
-
-
-
... More
220 HP Air cooled
1
-
-
... More
AIR SEPERATOR: supply, installation, testing and commissioning of Centrifugal air seperator with insulation and necessary supports and accessories
1
-
-
... More
CELING SUSPENDED AIR HANDLING UNITS: Supply, installation testing and commissioning of Ceiling Suspended AHUs Inverter Type Ducted Units of specified capacities, nominal capacity condensing unit with all standard fittings, safety devices, like HP/LP cutout, single phase preventor, overload relays, R-410A Gas, vibration isolation pads etc. Suitable to work till 50 Deg ambient, Blue Fin Condenser and Corrosion Resistant Body, Wide Voltage Range 360V- 440V,Scroll Compressor-driven Out door unit stand for Ducted machine ,vibration isolation pads etc. complete including all charges, Anticorrosive black paint (2 coat epoxy painting and 2 coat primer ) etc. (Complete in all respects as per technical specification)
-
-
-
... More
1.0TR,400CFM,30MMESP
2
-
-
... More
1.5TR,600CFM,30MMESP
1
-
-
... More
2.0TR,800CFM,30MMESP
8
-
-
... More
2.5TR,1000CFM,30MMESP
2
-
-
... More
3.2TR,1280CFM,30MMESP,Pre & Fine Filter
3
-
-
... More
4.5TR,1800CFM,30MMESP,pre& Fine Fliter
4
-
-
... More
6.5TR,2480CFM,30MMESP,pre& Fine Fliter
5
-
-
... More
8TR,3200CFM,30MM ESP
4
-
-
... More
11TR,4400CFM,30MM ESP,Pre& fine filter
1
-
-
... More
Supply installation testing and commissioning of VRF compatible 4 way Cassette unit type with cordless remote, of following minimum capacities suitable for operation single phase, 230 V, 50Hz supply, including fixing of room unit, with high lift drain pump, all associated electrical works including accessories including power socket/power/control cabling etc, ,the filter shall be plasma and synthetic washable media type arranged for convenient cleaning and replacement. PVC condensate drain pipe (upto 5m) 6kg/sq.cm of suitable dia connecting to the drain pan of the indoor units to nearest drain point with necessary U-traps, elbows, fittings etc. duly insulated with 9 mm thick closed cell elastomeric class 0 insulation finished with 7 mils factory laminated glass cloth & with required accessories like structural supports, Vibration isolator etc. complete in all respects as per technical specifications. Color/Finish(Powder Coating) shall be selected or approved by Architects (Complete in all respects as per technical specification)
-
-
-
... More
4TR 4 Way Cassette with drain pump
5
-
-
... More
3.2TR 4 Way Cassette with drain pump
2
-
-
... More
3.5TR 4 Way Cassette with drain pump
1
-
-
... More
Supply of VRF / Package air cooled Air-conditioners each complete with Rotary compressor, air cooled condensor, GSS casing, filters, cooling coils, fan motors, copper refrigerant piping (insulated) length as per drawing maximum upto 3 mts, control wiring, refrigerant controls and accessories, including MICRO-PROCESSOR CONTROL with indication lamps for the operation of the system with inbuilt thermostat remote controller operated with Micro- processor control panel for each machine. Tenderes to elaborate the features of Micro- processor panel. GI painted frame works for outdoor units & making good of civil work's
-
-
-
... More
2TR High wall unit
1
-
-
... More
TREATED FRESH AIR UNIT: Supply ,Installation and testing and commissioning of double skin thermal break Treated fresh Air Handling Units complete with chilled water cooling coil, centrifugal fan, cleanable fabric pre&fine filters, flushing by pass arrangement, condensate drain pan, coil piping connections, condensate drain connections, blue fins/gold fins/blygold fins to be considered for coil, mixing box with dampers, flexible duct connectors, including thermostats that are BMS compatible, temperature controller, and sensors along with the control box, its transformer, relays, necessary power and control wiring between the thermostat, controller, AHU, PICV as shown in the drawings and specifications. The duties of equipments listed below and accessories shall be as per equipment schedule. All units shall be suitable for 415 +/-10% volts and required lengths of wiring as per site requirement to be included. VFD to be provided to suitable for the machine capacity.The electrical power wiring from the starter panel to the units shall be included. Units shall be installed as shown in the drawings and Sound Attenuators as applicable to meet the design noise criteria as specified for the capacities as under.
-
-
-
... More
1750CFM,40MMESP
2
-
-
... More
1200CFM,40MMESP
1
-
-
... More
850CFM,40MMESP
2
-
-
... More
750CFM,40MMESP
2
-
-
... More
450CFM,40MMESP
4
-
-
... More
600CFM,40MMESP
1
-
-
... More
100CFM,40MMESP
1
-
-
... More
GAS/LIQUID COPPER PIPING: Supply, Installation ,testing and commissioning of Gas/ Liquid Copper Piping with 19mm thick nitrile rubber class 'O' insulation of suitable thick round closed cell elastomeric insulation with minimum R value of 0.7 for pipe size greater than 40mm and 0.4 for less than 40 mm, finished with 7mils factory laminated fibre glass cloth and insulation shall have antimicrobial properties. Refrigerant piping shall have suction filters for gas line, filter drier & sight glass for liquid line as per specification for each indoor machines & outdoor units including chasing, drilling, concealing and making good the same on walls etc of following specifications as per site conditions. Suitable Refnet/ Y joints required for interconnection of piping & required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps, etc shall be considered as part of refrigerant piping .Complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated. Complete in all respects as per technical specifications.(Piping quantities are tentative and total cost quoted shall be suitable for site layout, unit location and installation requirement.)
-
-
-
... More
6.4mm
394
-
-
... More
9.5mm
405
-
-
... More
12.7mm
258
-
-
... More
15.9 mm
136
-
-
... More
19.1 mm
198
-
-
... More
22.2 mm
210
-
-
... More
28.6 mm
181
-
-
... More
34.9 mm
210
-
-
... More
41.5 mm
215
-
-
... More
DRAIN PIPING: Supplying, fixing, testing and commissioning of UPVC Class E condensate drain pipe with U trap, insulation & fittings up to drain line with necessary support and accessories
-
-
-
... More
50mm Dia
78
-
-
... More
32mm Dia.
78
-
-
... More
25mm Dia
156
-
-
... More
20mm Dia
240
-
-
... More
Supply & Installation of Inline Centrifugal Extract Fans shall be with direct driven centrifugal fan, circular section, suitable for ceiling suspension/mounting. The units shall be complete with flexible duct connections at inlet and outlet. The motor shall be protected by thermal contact relay as protection against burn-out. as with all necessary accessories and supports
-
-
-
... More
Ground Floor
-
-
-
... More
500 CFM,15MM ESP
2
-
-
... More
650 CFM,10MM ESP
1
-
-
... More
100 CFM,10MM ESP
3
-
-
... More
First Floor
-
-
-
... More
225 CFM,10MM ESP
4
-
-
... More
100 CFM,10MM ESP
4
-
-
... More
325 CFM,10MM ESP
3
-
-
... More
500 CFM,15MM ESP
3
-
-
... More
650 CFM,15MM ESP
1
-
-
... More
1000 CFM,15MM ESP
3
-
-
... More
Second Floor
-
-
-
... More
100 CFM,18MM ESP
5
-
-
... More
225 CFM,10MM ESP
6
-
-
... More
500 CFM,15MM ESP
4
-
-
... More
750 CFM,15MM ESP
2
-
-
... More
1200 CFM,15MM ESP
2
-
-
... More
Supply, installation , testing and commissioning of metal body wall mounted proppeller fan with necessary accessories and supports
18
-
-
... More
Supply, installation , testing and commissioning of aluminium duct with corner pieces, nut& bolt, gasket, Joints to be sealed with sealents, with all necessary hi-tech support and accessories as per the site approved shop drawing and Site condition.(for OT1,OT2 , & OT TFA Ducting )
-
-
-
... More
22 G
380
-
-
... More
20 G
190
-
-
... More
Supply, installation , testing and commissioning pre insulted duct with all necessary hi-tech support and accessories as per the site approved shop drawing and Site condition.
940
-
-
... More
AIR TERMINAL: Supply, installation , testing and commissioning of GI volume control damper with corner pieces, nut& bolt, gasket, Joints to be sealed with sealents, with all necessary hi-tech support and accessories as per the approved shop drawing and Site condition.
10
-
-
... More
Supply, installation , testing and commissioning of supply air aluminium powder coated diffuser with collar damper, withall necessary hi-tech support and accessories as per the approved shop drawing and Site condition.
10
-
-
... More
Supply, installation , testing and commissioning of return air aluminium powder coated diffuser with outcollar damper, withall necessary hi-tech support and accessories as per the approved shop drawing and Site condition.
10
-
-
... More
Supply, installation , testing and commissioning of supply air aluminium powder coated grille with collar damper, withall necessary hi-tech support and accessories as per the approved shop drawing and Site condition.
3
-
-
... More
Supply, installation , testing and commissioning of return air aluminium powder coated grille without collar damper, withall necessary hi-tech support and accessories as per the site approved shop drawing and Site condition.
6
-
-
... More
Supply, installation , testing and commissioning of aluminium powder coated louver withall necessary hi-tech support and accessories as per the site approved shop drawing and Site condition.
4
-
-
... More
Supply, installation , testing and commissioning of class 'o' closed cell nitrile rubber insulation with self adhesive. Duct surfce to be cleaned before applying adhesive and joints to sealed with 3mm thick,5centimeter black tape.
-
-
-
... More
13mm Thick
380
-
-
... More
19mm Thick
190
-
-
... More
Supply, installation , testing and commissioning of class 'o' open cell Acoustic insulation with self adhesive. Duct surfce to be cleaned before applying adhesive .
-
-
-
... More
10mm Thick
120
-
-
... More
Supply, installation , testing and commissioning of class 'o' closed cell nitrile rubber insulation for under deck with self adhesive.
-
-
-
... More
13mm Thick
160
-
-
... More
Volume control Damper: Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction with operating mechanism, mounting arrangement, rubber
refrigerant kits etc. complete.
10
-
-
... More
HEPA & STRIP HEATER: Supply, installation , testing and commissioning of HEPA filter,Plenum Construction : 1 mm Aluminium construction having Aluminium Square tube skeleton structure,Perforated diffuser: 1 mm Stainless Steel (SS-304) Inline Round Perfoaration : 5mm ø,12 mm Pitch,Filter fitment : Filter face seating on a self-leveling Poly Urethene compound formed on the Plenum structure,Thermal insulation : 19 mm thick Class "O" Nitrile insulation with aluminium foil lamination on exterior side,Duct connecting collar : No. of Duct connecting Collars -Based on user requirements Maximum Height : 225 mm,Volume control dampers : Aluminium Aerofoil Volume Control Damper Operable from the OT side without distrubing filter installation,Suspension brackets : SS "L" angle brackets for ceiling suspension of the Plenum, with all necessary hi-tech support and accessories as per the site approved shop drawing and Site condition. Plenum Size: 2350 (L) x 1740 (W) x 455 (H) mm (Excluding Thermal Insulation)
3
-
-
... More
Supply,install,testing and commissioning of strip heaters comprising thermostat,humidistat, safety thermostat, contactors, Controls & control Wiring. Minimum capacity of strip heaters shall be 2 KWx3Nos
21
-
-
... More
FRP Cable Tray: Supply of the following sizes of Ladder Type FRP cable trays with vertical sides on both ends as per approved design and FRP supports with coupler plates spaced 300mm apart throughout the length as specified, including the cost of support hooks, fasteners, painting if required etc.( Contractor shall ensure to use corrossion free materials as support or fastening fittings)
-
-
-
... More
300mm(300x100x25)
300
-
-
... More
Supplying, Fixing, Testing & commissioning at site in position2 HP Axial Fan for Exhaust Specification :Fan Casing is made of heavy gauge MS Sheet (as per IS-1079/2062) having robust construction. It has flanges at both ends for easy fixing on ducts/walls. Impeller is made of Die Cast aluminium having aerofoil design with adjustable pitch angles. fitted with 2 Hp , 4 Pole, 440 volts , 50 Hz, 3 Phase Motor
1
-
-
... More
Supplying, Fixing, Testing & commissioning at site in position1 HP Axial Fan for Fresh Air Specification :Fan Casing is made of heavy gauge MS Sheet (as per IS-1079/2062) having robust construction. It has flanges at both ends for easy fixing on ducts/walls. Impeller is made of Die Cast aluminium having aerofoil design with adjustable pitch angles. fitted with1 Hp , 4 Pole, 440 volts , 50 Hz, 3 Phase Motor
1
-
-
... More
Supplying, Fixing, Testing & commissioning at site in positionGI Ducting with Fittings For Exhaust Specification : 22 Swg Gi Sheet Of Tata/Jindal With All Connected Accessories For Fitment Of The Duct On The Ceiling And With Hood As Per Site Layout/Site Conditions. Plat Form For Fixing Blower, Smooth Bends, Bents To Be Fixed With GI Angle And GI Suspenders Fixed On To The Ceiling/Wall With All Allied Fixing Materials. The Jointing Flanges To Be Made With 35x35x3 Mm. GI Angle. 8mm GI Rods And Painted 5mmx35mmx3mm GI Angle At An Interval Of 2mtr Shall Be Used To Suspended The Ducting On To Ceiling/Wall. Duct Joints to Be Bolted Together With Gasket for Air Tight Seal.
1
-
-
... More
Supplying, Fixing, Testing & commissioning at site in positionGI Ducting with Fittings For Fresh Air Specification : 22 Swg Gi Sheet Of Tata/Jindal With All Connected Accessories For Fitment Of The Duct On The Ceiling And With Hood As Per Site Layout/Site Conditions. Plat Form For Fixing Blower, Smooth Bends, Bents To Be Fixed With GI Angle And GI Suspenders Fixed On To The Ceiling/Wall With All Allied Fixing Materials. The Jointing Flanges To Be Made With 35x35x3 Mm. GI Angle. 8mm GI Rods And Painted 5mmx35mmx3mm GI Angle At An Interval Of 2mtr Shall Be Used To Suspended The Ducting On To Ceiling/Wall. Duct Joints to Be Bolted Together With Gasket for Air Tight Seal.
1
-
-
... More
Supplying, Fixing, Testing & commissioning at site in positionFresh Air Grill
9
-
-
... More
Supplying, Fixing, Testing & commissioning at site in positionWall Mount Exhaust Hood With Baffle Filters size-1800*900*500 mm ,Exhaust Hood with filters for Bulk range & Hot plate Wall mounted type :
20 SWG SS 304 body; SS 304 Baffle filters , air grill and oil collection tray
1
-
-
... More
Supplying, Fixing, Testing & commissioning at site in positionWall Mount Exhaust Hood With Baffle Filters -size-1250*750*500 mm,Exhaust Hood with filters for Bulk range & Hot plate Wall mounted type :
20 SWG SS 304 body; SS 304 Baffle filters , air grill and oil collection tray
2
-
-
... More
OXYGEN SYSTEM (O2): Supply, Testing and commissioning of Fully automatic Oxygen Control panel Model AMAZON -D with flow rate of 2100 LPM Fully complying with ISO 10524-2, ISO 7396-1:2007/HTM02-01 as per technical specification. (Make: Drager )
1
-
-
... More
Oxygen Manifold : Supply, testing and commissioning of Oxygen Manifold - 2 banks x10 cylinders including Copper tail pipes. (Make:Drager)
1
-
-
... More
Oxygen Emergency Manifold: Supply, testing and commissioning of Emergency Oxygen manifold 1 x 5 with IOX-14 high flow regulator (Make: Drager)
1
-
-
... More
NITROUS OXIDE (N2O) SYSTEM: Supply, Testing and commissioning of Semi -automatic Nitrous Oxide Control panel with minimum flow rate of 2000LPM Fully complying with ISO 10524-2, ISO 7396-1:2007/HTM02-01 as per technical specification. (Make: Drager)
1
-
-
... More
Manifold System N2O: Supply, testing and commissioning of Nitrous Oxide Manifold - 2 banks x 2 cylinders including Copper tail pipes. (Make: Drager)
1
-
-
... More
Emergency Manifold N2O: Supply, testing and commissioning of Emergency Nitrous Oxide manifold 1 x 2 with IOX-14 high flow regulator. (Make: Drager)
1
-
-
... More
CARBON DI-OXIDE SYSTEM: Supply, Testing and Commissioning of Carbon Dioxide manifold - 1 x 2 with IOX-14 High Flow Regulator. (Make: Drager)
1
-
-
... More
MEDICAL AIR SYSTEM: Supply Installation, Testing and Commissioning of ANESTIWATA (Japan) Make Model BFT 75C- 9E 7.5 Hp Non - Lubricated Air Compressor Base frame mounted -24.43 cfm (692 Lpm) - 2 Nos. with all standard accessories.
1
-
-
... More
Air Dryer system: Supply, Installation, Testing and Commissioning of TRIDANT Make Desiccant Air Dryer. Model : DRYSPELL PLUS 45 - 60 CFM
1
-
-
... More
VACUUM SYSTEM: Supply, Installation, Testing and Commissioning of. ANEST IWATA Make Vacuum Pump Model:BVLS 50 DE - 5HP - 2 Nos with 1000 Ltr Vacuum Receiver tank - 1 No, Vacuum switch - 2 No., DOL starter - 2 No, 5 HP Motor - 2 No. with inter connecting pipes
1
-
-
... More
COPPER PIPING Supply, installation testing and commissioning of Copper pipe: Per Mtr. It must comply with EN 13348 as per technical specifications. Make: Mexflow
-
-
-
... More
15 mm
1780
-
-
... More
22 mm
1030
-
-
... More
28 mm
250
-
-
... More
35 mm
62
-
-
... More
42 mm
25
-
-
... More
54 mm
33
-
-
... More
MEDICAL GAS OUTLETS Supply, Installation, testing and commissioning of DIN Gas Outlets meeting requirements of EN ISO 9170-1 Make: Drager
-
-
-
... More
O2 Outlet with probe
140
-
-
... More
N2O Outlet with probe
9
-
-
... More
Air 4 Outlet with probe
54
-
-
... More
Air 7 Outlet with probe
6
-
-
... More
CO2 Outlet with probe
4
-
-
... More
Vacuum Outlet with probe
102
-
-
... More
Anaesthesia Gas Scavenging System Outlet (AGSS) Ventury type with probe (Make: Drager)
3
-
-
... More
Supply, Installation, testing and commissioning of Area Valve Service fully complying with ISO 7396-1:2007 (Make: Aktive Technologies)
-
-
-
... More
2 Gas With Valves (15/22)
6
-
-
... More
3 Gas With Valves (15/15/22)
9
-
-
... More
4 Gas With Valves (15/15/15/22)
2
-
-
... More
6 Gas With Valves (15/15/15/15/15/22)
2
-
-
... More
AREA ALAM PANELS Supply, Installation, testing and commissioning of Digital Area Alarm Service fully complying with ISO 7396-1:2007 (Make Aktive Technologies)
-
-
-
... More
Medical Gas Area Alarm Digital 2 Gas
1
-
-
... More
Medical Gas Areal alarm Digital 3 Gas
5
-
-
... More
Medical Gas Area Alarm Digital 6 Gas
1
-
-
... More
BALL VALVES Supply, installation, testing and commissioning of Ball Valves, complying with HTM 02-01, as per technical Specifications. Make: UN Med
-
-
-
... More
15 mm
52
-
-
... More
22mm
10
-
-
... More
28mm
4
-
-
... More
35 mm
2
-
-
... More
54 mm
4
-
-
... More
Rigid Pendant Rigid Pendant Vertical type with Provision for Medical Gas Outlets and Electrical Sockets with 1 Monitor stand
1
-
-
... More
Bead Head Panels (BHU) Supply, Installation, testing and commissioning of Bed head panels with Medical gas Terminal unit provisions as per tender drawing, Provision for Electrical and data points as per consultant specification. (Make: Drager / Stark Storme) 4 Feet Long
95
-
-
... More
ACCESSORIES (Make: GHL)
-
-
-
... More
Oxygen BPC Flowmeter with Humidifier Bottle
95
-
-
... More
600 Ml Wall Suction Unit
95
-
-
... More
Theatre Suction Unit with 2 x 2000 ml Bottles
3
-
-
... More
Medical Oxygen Generation Plant 1. Compressed Air Station Modular rotary screw compressor with refrigeration dryer & air receiver, equipped with the followings: from FS CURTIS a) Air compressor b) Refrigeration air dryer c) Air filtration system d) Air tank :1500L 2. OXYGEN PSA GENERATOR a) 2 PSA sieve beds b) 1 monitoring system CPU Controller with digital screen c) 1 separate oxygen receiver equipped for oxygen service d) 2 air inlet filters (25 μm and 0.1 μm) e) 1 oxygen outlet filter * Flow : 10.5 m3/h at purity 93% + 3% * Pressure : 4.5 to 6 bar-g * LPM : 175 3. OXYGEN BUFFER a) Vertical configuration b) Capacity : 1000 L
1
-
-
... More
OT TABLE
-
-
-
... More
• Table type: fully electric
• Height adjustable range: 750mm to 1000mm
• Trendelenberg : 30 degree
• Maximum patient load: 200 kgs
• Table length: 1930mm
• Table width: 533mm
• Trendelenberg reverse: 25 degree
• Lateral tilt: left :20 degree/right :20 degree
• Back rest: up:80 degree/down:25 degree
• Leg rest:up:15 degree/down:90 degree
• Head rest :up:20 degree/ down:60 degree STAAN/CONFIDENT/AMSCO
3
-
-
... More
OT LIGHT
-
-
-
... More
• Double doom
• Light source type: L.E.D.
• Color temperature: 4300 K
• Intensity: 1,60,000 Lux
• Focus diameter: 15-20 cm
• Led lifetime: 50,000 hours.
• Light head diameter: 53cm
• Control unit: SMPS
• Color rendering index: 93
• No of LEDs: 63 DR MAACH/STAAN/STRYKER
3
-
-
... More
ANESTHESIA PENDENT
-
-
-
... More
Anesthesia Pendent with Single Arm, Terminal units as per consultant drawing,330 degree angle rotation of column and arm, with air break as standard for arm system, 2shelves ,IV pole with arm- 1no.,Provision for 12 nos Electrical and 4 data points.
2
-
-
... More
SURGERY PENDENT
-
-
-
... More
Surgeon Pendent with Double Arm , Terminal units as per consultant drawing,330 degree angle rotation of column and arm, with air break as standard for arm system, 3shelves.Provision for 12 nos Electrical and 4 data points. • Microprocessor controlled
• Smart feedback system
• Pre-defined programs
• Monopolar & bipolar modes
• Soft, Swift, Force & Spray coagulation
• Dual output for monopolar coagulation
• Split patient plate indicator
• Bipolar coagulation with auto start
• Automatic power regulation
• quality monitoring system ALAN/VALLEYLAB/COVIDIEN
2
-
-
... More
FULLY AUTOMATIC HORIZONTAL STEAM STERLISER TUTTUNEUR/GETTINGE/MMM
1
-
-
... More
HORIZONTAL STEAM STERILISER
-
-
-
... More
• Design pressure: 0.26MPa
• Design temperature: 150℃
• Maximum working pressure: 0.23MPa
• The accuracy of temperature display: 0.1℃
• Selection of sterilization temperature: 105℃~138℃
• Uniformity of temperature: ≤ ± 0.5℃
• Material of the cavity: SUS304 stainless steel
• Requirements for water sources: Distilled water or RO water. YORCO/OSE
1
-
-
... More
ETO STERILISER
-
-
-
... More
• Computer controlled profit. Simple and convenient operation. display of operating status
(including temperature). Temperature. Negative pressure. Sterilization time. Residual gas
treatment time/times).
• Record and print the sterilization information of the whole process. For verification and filing.
• Built-in humidity sensor; Select advanced imported humidity sensor, automatic detection of sterilization indoor humidity. With automatic program recovery function: regardless of power failure. Power outage. Or computer program element disorder, can judge its fault point. The program automatically restores after powering on.
• Multiple protection functions: no over-voltage and over-temperature protection function. More secure and reliable.
• The air inlet is equipped with aseptic filter, which can effectively remove bacteria and microorganisms, and avoid secondary pollution when discharging residues. PCI
1
-
-
... More
PLASMA STERILISER JOHNSON& JOHNSON
1
-
-
... More
ULTRASONIC CLEANER
1
-
-
... More
Freestanding ultrasonic washer for surgical instruments to process up to 16 lumened devices, or up to 35 lbs. per cycle* Automated dosing and delivery of chemistry Simple operation with touch screen control that clearly displays cycle status UNIDENT/VEVOR
-
-
-
... More
INSTRUMENT DISINFECTOR 50% more throughput compared to standard single chamber washers
Uses as low as 31 gal. water/cycle; Process up to 300 DIN trays/8-hour day
1
-
-
... More
DRYER UNIT
1
-
-
... More
SEALING MACHINE
1
-
-
... More
• Stainless steel material
• Sterilization pouch packing
• Capacity of 10M/Min SEAPACK
-
-
-
... More
SITC OF Pre‐Fab Wall Panel:
Stainless Steel Grade 304 Panel : The Pre‐fabricated modular construction is designed and constructed for exact size, easy field installation and future disassembly, enlargement, or relocation. The operating room will be constructed from Pre‐fabricated Panel of 1.2 mm or more thick Stainless Steel Grade 304 sheets, with a 12 mm thick backing of gypsum board
337.13
-
-
... More
SITC OF Substructure Steel Assembly : Substructure elements of 1.5 mm thick GI extending from the finish floor to ceiling slab to make the wall panels free standing. Suitable substructure in GI for mounting wall panels along walls, with cross members to support equipment's flush mounted in to the wall panels. Substructure will also have provision for routing electrical wiring and gas Pipeline.
279.32
-
-
... More
SITC OF Pre‐Fab Ceiling:
Stainless Steel Grade 304 Panel : The Pre‐fabricated modular construction is designed and constructed for exact size, easy field installation and future disassembly, enlargement, or relocation. The operating room ceiling will be constructed from Pre‐fabricated Panel of 1.2 mm or more thick Stainless Steel Grade 304 sheets, with a 12 mm thick backing of gypsum board. Suitable grid structure suspended from the ceiling slab should be provided to support the ceiling panels to the required height, and also provide for easy routing of electrical conduits, gas pipelines and bio air‐conditioning ducts.
119.84
-
-
... More
SITC OF Antimicrobial Coating:
Filling of all Joints and cavities with metallic Epoxy Filler and Sanded Flush to provide a joint less finish and then sprayed with a water based liquid plastic aseptic and self sterilizing wall coating system to a d.f.t. of 300microns with primer.
575.46
-
-
... More
SITC OF Antistatic Conductive/ Dissipative Flooring: Seamless with perfectly curved flush‐covings, resistance to mechanical stresses and dynamic loads and having conductive protection characteristics, 2 mm thick, washable
120.25
-
-
... More
SITC OF Hermetically Sealing type of Manual Sliding / Swing Door having thickness of 40‐48mm of size 1500 X 2100 mm single / dual leaf with PUF core sandwiched between Antimicrobial High Pressure laminates (HPL), with viewing window of size 300 X 300 mm. The door leafs hung on extruded heavy duty aluminium alloy extrusion Doorframe for single side swing Doors, Sliding Door leafs runs on (nylon wheels) within an extruded heavy duty aluminium alloy extrusion track / frames, for smooth effortless sliding with the help of handle.
3
-
-
... More
SITC OF Microprocessor based Electronic Automation (Operator ) for Manual Door for controlling the direction of movements, the acceleration and speed of the door, with a low noise level pulse generator motor. It includes a photocell for users safety. (For sliding door)
3
-
-
... More
CONTROL PANEL:SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OT CONTROL PANEL, MOUNTED FLUSH IN THE THEATRE WALL ALONG WITH DIGITAL DISPLAYS COMPRISING OF THE FOLLOWING:
1. DAY TIME CLOCK (DIGITAL)
2. TIME ELAPSED CLOCK (DIGITAL) 3 TEMP. AND 4. HUMIDITY DISPLY. 5. POSITIVE PRESSURE STATUS.
3
-
-
... More
SITC of ULTRAVIOLET LIGHT: UV LAMP FIXTURE MADE OF SS
304 AND FITTED WITH 30 W UV TUBES.
3
-
-
... More
DENTAL CHAIR WITH EQUIPMENT TRISCO/CONFIDENT/SKANRAY
1
-
-
... More
LABOUR TABLE • Heavy duty tabular frame work on smooth running castors with brakes
• Five section top with mattress
• Back section adjustable on pneumatic pump
• Trendelenburg and reverse trendelenburg by crank mechanism
• Table can be positioned as chair and lithotomy pelvic position upto 120 mm
• Size: 1830 L x 600 W x 810 H mm approx
• Pre-treated and Epoxy Powder Coated
3
-
-
... More
GAS WORK Supplying, Fixing, Testing & commissioning at site in positionGas Bank Specification : (3+3) Manifold SS 304 1/2 pipe Schedule 40 S with Necessary Fittings 3/8 needle valve unitech
Emergency shutter valve 1/2"
4" ss measure guage
Manifold valve ss valve
Non return valve (gasman)
Liquid drain filter
QC adapter (gaso)
Cylinder pigtail 2ft.
Booster valve united 30 PSI
Range connector (Lumpsum)
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%