Rural Development And Panchayati Raj Department Tender

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse s,and : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts.

Centering and shuttering including strutting, propping etc. and removal of form work for :Columns, piers, abutments, pillars, posts and struts

Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete job 25mm thick with 12.5 mm nominal size stone aggregate.

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:4 (1cement:4 coarse sand), cost of required centring, shuttering and curing complete1:3:6(1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size

Providing and fixing round beams (local Ballies), including hoisting, fixing inposition and applying wood preservative for the unexposed surfaces, etc.complete job; Average diameter 350 mm

Providing and fixing local talboos (Second order branch willow tree) including providing an ornamental look and fixing with nails complete job

Providing and laying 200mm thick mud pushka over talboos with 5mm thick dry grass (Yakzes/spoto/dry paddy straw etc), including ramming at OMC

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second kail wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screwsSecond class teak wood 30mm

Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with; 2nd class kail wood

French spirit polishing Two or more coats on new works including a coat of wood fille

providing and Fixing of wooden panelling 4'' width 12mm thick playwood incl polishing All complete job

Providing and fixing of ready made PVC ceiling . All complete job

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etcBudloo/Fir wood.

Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) : Light shade pigment using white cement

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.

Providing corrugated color coated sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diametre with bitumen And G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins,rafters and trusses and including cuttingto size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gm/ m3

carriage of cement an avg lead 100 km by MT

carriage of sand an avg lead 70 km by MT

Carriage of stone an avg lead 40 km by MT

Wiring for light point 6amp socket/exhaust fan point / call bell point /with 1.5 Sq.mm PVC FR insulated copper conductor single core in surface/recessed medium class PVC conduit, suitable size MS box and earthing the point with 0.75 Sq.mm. FR PVC insulated copper conductor single core cable as required.

Wiring for 16amp socket outlet with 2.5mm FR PVC insulated copper conductor cable in existing recessed PVC conduit including sheet as required.

Supply and fixing of a 10amp 240 volt single pole grid plate mounted switch indicator with molded copper plate including recessed 2 inch M.S box complete as required including connection.

Supply of 1100 volt grade aluminium conductor KPLE insulated PVC sheath arranged complete as per specification as required 25 sqmm, 3.5 core

3 modular

8 modular

6 modular

Supply and fixing of combined 3 pin 240 volt 20amp socket outlet with safety shutter and 20amp 240 volt single pole mounted in recessed including M.S box complete as requird

Supply and fixing of following single pole and neutral sheet steel MCB distribution board 240 volt on surface recess complete with tinned busbar neutral link earth bar, tin bar, detachable glaud plates, double door interconnected including pointing etc as required 16 way double door SPN.

Supply and fixing of the following light fixtures including all accessories like electronic ballasts coms etc, complete as required concealed/Tube lightning 20 watt 3000k, round LED Luminaries as per Philips

Supplying and fixing of 25mm PVC conduit capping along with accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required.

Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc, as required. A) Single pole 6/10/20 Amp

Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc, as required.B) Double pole 63 Amp

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China wash basin size 660x460 mm with a pair of 15 mm C.P. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps..

Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape(1500x450) mm.

Providing and fixing toilet paper holder C.P. brass

C.P. Brass bibcock 15 mm

Providing and fixing flow trap of PVC .

Providing and fixing soil, waste and vent pipes 100mm dia PVC.

Providing and fixing soil, waste and vent pipes 75mm dia PVC

Providing and fixing of plain bends of required degree. A) 100mm dia PVC.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, 40x40x6 mm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fitings 1/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc.20 MM OD

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fitings 1/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc 25mm od

Providing and fixing of insulation for water storage tank with 25mm nitrile sheet, rock wool , GI - Insulation mesh , black polythen and aluminium sheet for covering including all fixtures, adhesive , claps etc and cost of material and labour complete job as per direction of engineer - in - incharge.

Providing and fixing of pipe with heat wire 25 x 13 mm nitrile insulation pipe , rock wool , GI - Insulation mesh , black polythen and aluminium sheet for covering including all fixtures, adhesive , claps etc and cost of material and labour complete job as per direction of engineer - in - incharge.

Kitchen sink with drain board 17.10.1.1 510x1040 mm bowl depth 250mm. 510x1040 mm bowl depth 250mm.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-icharge

1. PV module-75 Wp under 2. Battery- minimum 12V, 30 AH capacity lithium ion phosphate (lifePO4). 3.Light source- White light emitting diode (W-LED) 30 watt, W-LED luminaire, dispersed beam, soothing to eyes with the use of proper optics and diffuser.LED chips should be compliance to IES:LM-80(Approved method of measuring Lumen maintenance for LED light sources and LED lumen depreciation time to L70). Test report for the same should be submitted. 4. Light output: The luminaire must use high efficacy W-LED with minimum 150 lumens per watt (and UV free) (A certificate to be submitted by the system supplier to the test lab during certification). For single light level-minimum 15 lux when measured at a point 4 metres below the light.The illuminatin should be uniform without dark bands or abrupt variations and soothing to eye.Higher light output will be preffered. For multiple light levels tghe luminaire should have two levels of light to take care of different lightning needs during the night.Minimum 15 lux when measured at a point 4 metres below the light.(at high illumination level).The illumination should be uniform without dark bands and abrupt variations. Minimum 5 lux at lower illumination levels.(Higher light output will be preffered.) The luminaire shall be tested for Electrical, Photometry and Colour parameters as per IES LM-79:2008 or IS:16106:2012 for the following performance parameters like: a) Total luminous flux: >=3000lm. b) Luminous efficacy (i.e system efficacy): >=150lm/W. c) Colour temperature: Between 5500K to 6500K. d) CRI>=70. e) Luminous intensity distribution should follow the batwingspattern polar curves. f) Require validations report using ies files which is generated during luminous intensity distribution test and using maintenance factor 0.9 and pole height 4 metre, road with 5 metre and pole span 15 metre. The average illuminance level and uniformity should comply with requirements as per IS: 1944 wherever applicable. 5. Mounting of light: pole height 5m above ground level and 1 m below ground level.Luminaire shall be at least 4.5m above gorund level.The diameter of the pole should be 75-76mm and thickness2-3mm. 6. Electronics efficency: Overall total efficency of the electronics should be minimum 90%. 7. Duty cycle: Dusk to Dawn: first 8 hours full light (mim 15 lux), rest of the time at lower light (50%,min 10 lux) level. 8.Higher light output will be preffered. 9. Autonomy: 2 days or minimum 12 operating hours per permissible discharge with fully charged Lifepo4 battery. 10.Ingress protection: P optical and control gear compartment-IP65/IP66. 11.Impact resistance of the casing: >=IK 08. 12. Working temperatures: -25 degress C to 60 degree C. 13. Civil work: earth work and cement concrete in 1:2:4 mix using 20mm curshed stone aggregate incluidng carriage of cement solar light complete set (including light pole, battery, solar panels, LED lights).