Public Works Department Tender

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Earthwork in excavation by manual means overareas (exceeding 30cm in depth, 1.5m in width as well as10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and liftup to 1.5m, as directed by Engineer-in charge. All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)

Cement concrete flooring1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.13.94.1 New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Asian paints/Nerolac paint/Dulux paint (Shade as per instruction of Engineer Incharge)

Finishing walls with waterproofing cement paint of the required shade, applied in two or more coats, with a priming coat.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Second class Kail wood

Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B), using 4 mm thick float glass panes for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, all as per directions of Engineer-in-charge (Note:- Butt hinges and necessary screws shall be paid separately) 30 mm thick shutters.

Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured).

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc.complete : 9.66.1 125 mm

Providing and fixing 12 mm thick pre laminated flooring of approved brand as per direction of engineer incharge, complete job AC-4 including carriage.

Structural stee lwork insingle section, fixed with or without connecting plate, including cutting, hoisting,

Supply and fixing of wall-to-wall carpeting, including all required materials, adhesives, and labor for installation, as per the selected material and specifications, with the total cost for the entire work to be provided upon confirmation of the area and material selection. The prices include all materials, transportation, and labor charges, with installation to be completed within [Insert Timeframe] from the date of order confirmation.

Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. Raj nagar plain white marble/ Udaipur green marble/ Zebra black marble

Supply, installation, testing, and commissioning of 1.5 Ton hot and cold split air conditioner, inverter/non-inverter type, including indoor and outdoor units, all necessary accessories, complete installation as per manufacturer's specifications, and providing warranty as per manufacturer’s terms

Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with; 2nd class kail wood

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

12mm thick pre-laminated particle board (decorative lamination on both sides) grade-1, medium density flat pressed, three layer particle board FPT-I or graded wood particle board FPT- I, conforming to IS : 3087, bonded with BWP type synthetic resin adhesive as per IS : 848andpre-laminated conforming to IS : 12823, Grade 1, Type - II marked :

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mmofall T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.12.5 mmthick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing

Providing and fixing Pre-laminated Global Pvc Profile PVC Sheets in Wooden Color for commercial applications, These sheets mimic the appearance of wood while offering the durability and low-maintenance PVC. All complete job as per direction of engineer in charge.

French spirit polishing, Two or more coats on new works including a coat of wood filler.

ProvidingandfixingISImarkedoxidisedM.S.handlesconformingtoIS:4992with necessary screws etc.complete : 125 mm

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: 1 Flat back wash basin of size 630x450mm.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern.

Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 510x1040 mm bowl depth 250mm.

Providing and fixing P.V.C. waste pipe for sink or wash basin and toilet waste including P.V.C. waste fittings complete. Chlorinated Polyvinyl - chloride (CPVC) pipe a) 90 mm nominal dia metre

b) Chlorinated Polyvinyl - chloride (CPVC) pipe 110 mm nominal dia metre.

Providing and fixing 3 layer PP-R (Polypropylene Random copolymer) pipes SDR 7.4 UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes the cost of cutting chases and making good the same including testingof joints complete as per direction of Engineer in Chajge. (Concealed work including cutting chases and making good the walls etc.,) a) PN-16 Pipe, 20 mm OD (SDR-7.4)

b) PN-16 Pipe, 25 mm OD (SDR-7.4)

c) PN-16 Pipe, 32 mm OD (SDR-7.4)

Providing and fixing heat tape 33Watt on PPR pipes made of denforced or chromelox or equivalent make, as approved by Engineer InCharge , complete Job

Providing and fixing of material for the insulation of pipe with nitrile tube , tapping with cello tape for inner wall fittings . complete job including carriage. 19 mm thick, 50 mm dia (OD) ( PPR 25 mmm)

Providing and fixing of material for the insulation of Water Storage Tank of with nitrile sheet , tapping with cello tape , Rockwood 6 inch per side, wire mesh, polythene , aluminum sheet 26 gauge cladding with dia of , complete job. 19 mm thick nitrile sheet

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 32 mm nominal bore.

Providing and fixing ball valve (brass) of approved quality complete : High or low pressure with plastic floats: 20 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 32 mm nominal bore.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet,outlet and over flow pipes but without fittings and the base support for tank

Carriage of material by Mechanical transport includinng loadingg, unloading and stacking complete job.a) Sand an avg lead 20km sand

b) Stone agg an avg lead 20km

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

c) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing following size/ modules, GI box alongwith modular base and cover plate for modular switches in recess etc, as required a) 4 Module (100x75mm)

b) 6 Module (200x75mm)

c) 12 Module (200x150mm)

Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connections but excluding modular plate etc as reqquired a) 5/6 A switch

b) 15/16 A switch

c) 3 pin 5/6 A socket outlet

d) 6 15/16 A socket outlet

Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240V ,on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required (but eithour MCB/RCCB/isolator) 8 way, Double Door

Suppling and fixing 5A to 32A rating, 240/415V, 10kA, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required a) Single pole

b) Double Pole

SITC OF 8 W LED 6500 K Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver. MAKE :- Havells

Supply installation testing commissioning of TRIM CLIPON LED PANEL SQUARE 24 W LED 6500 K Make:- Havells Model:-LHEAABP7IN1W024

Supply installation testing Water Heater Gyser of 25 L capacity of maker Havells, Phillips or equivallent company ISI Marked all complete job

Supply installation testing commissioning of exhaust fan at window 6" including cost of wiring, screws,etc all complete job

SITC of 15 KVA UPS, continuous duty, suitable for phase voltage of 100-277 volts line voltage correctors shall comprise of 3 single phase line voltage correctors, connected in star and enclosed in a single enclosure with common control panel and shall be suitable for unbalance Input voltage. Rated output voltage shall be 220V . Complete along with High and Low voltage cut-offsystem and with 60 minutes backup including batteries, stand, connecting leads, by pass arrangement, voltmeters (Digital), ameter (Digital) meter, auto as well as manual control i/c making connections with XLPE cable etc. complete as required.