Pradhan Mantri Gram Sadak Yojana Tender

Providing concrete for Plain/ reinforced cement concrete in foundation/ substructure complete as per drawing & technical specifications. Clause 802, 803, 804, 805,806,807,1202, 1203 &1204 ( ht.up to 5 m) including cost of form work ,loading/ unloading/ haulage of all materials and T&P etc and testing of materials and mix for quality control (including cost of form work) complete job. (PCC Grade M-10)

Part 'B' Pavement:

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408.

Construction of subgrade and earthern shoulder with approved material obtained from borrow pits with all lifts and leads, trasporting to site, spreading, grading to required slope and compacted to meet requirment to Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical Specification Clause 405. by mechanical means including loading/ unloading and haulage of materials, T&P etc. and testing of materials for quality control. (Complete Job)

Providing & applying priming coat with bitumen emulsion SS-1 using emulsion distributor @ 1Kg per sqm on the prepared granular surface cleaned with hydraulic broom as per technical specifications clause 502/503 including loading un loading and haulage of materials ,T&P etc & testing of materials for quality control complete job

Bituminous Macadam :- 50 mm thick Bituminous Macadam with Hot mix plant using crushed aggregate of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per technical specification clause 504.

P/L and rolling with 80-100 Kn roller 20 mm thick (compacting) open grade premix using bitumen 1.46 kg/sqm of road chipping 13.2 mm size @ 0.018 cum /sqm and 11.2 mm size @ 0.009 cum/sqm of road complete , but excld. Priming tack coat to be laid with Premix tack coat to be laid with confirming to clause 509 of MOST specification, incl. carriage/haulage of mix and alll material, T & P labour, Octories etc, involved and testing during excuation for quality control (complete job).

Providing & laying seal coat type B using bitumen @ 0.68 kg, per square meter of road surface and sand @ 0.006cum/Sqm of road surface all inclusive of carriage/haulage etc. conforming to technical specifications clause 510/513.using Bitumen (S -90) including carriage/haulage of mix and all materials, T & P, Labour, Octories etc, involved and testing during excution for quality control. complete job.

Part 'C' Road Signs

Providing and fixing of retro reflectorsed cautionary mandatory and informatory sign as per IRC 67 made of encapsulated lense type tentative sheeting 1.5mm thick supported on a mild steel angle iron post 75X75mm X 6mm finish to the ground by means of properly designed foundation with M – 15 grade cement Conc. (450 X 450 X600mm) 600mm below ground level drawing and technical specification clause 801.

Providing and erecting direction and place identification retro – feflectorised sign as per IRC – 67 made of encapsulated leans type reflective sheeting area north exceed 0.9 Sqm, supported on a mild steel single angle iron 75 X 75 X 6mm firmly fixed to the ground by means of properly designed foundation with M – 15 graded cement concrete 450-450X600mm below ground as per approved drawing and technical specification clause 1701.

a) Kilometer stone reinforced cement Conc, M –15 grade kilometer stone standard design s per IRC-8 fixing in position including painting extra as per drawing as and technical specification clause 1703 at the rate ordinary kilometer stone (pre – cast).

5th Kilometer stone

Providing and Laying Reinforcement cement concrete M15 grade 200 Mtr. Stone pre cast standard design as per IRC : 8 including painting & printing etc. as per drawing and technical specification clause 1703.

Typical PMGSY Logo & Informatory Sign Boards:-Providing and fixing of typical PMGSY informatory sign Board with logo as per MORD specification and drawing. Three MS plates 1.6 mm thick top and middle plate duly welded with MS Flat Iron 25mmx5mm on back edges. The lower plate will be welded with MS angle iron frame of 25x25x5mm. The angle iron frame of the lower most plate and flat iron frame of the middle plate will be welded to 2 No. 75x75mm of 12 SWG Sheet tubes posts duly embeded in cement concrete M-15 Grade blocks of 450x450x600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47x47mm of 12SWG Steel plate tubes. All MS well be stove enameled on the both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tubes will be painted with primer & two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

AMC for 1st Year

AMC for 2nd Year

AMC for 3rd Year

AMC for 4th Year

AMC for 5th Year

The Contractor has to quote the rates for Construction part without GST and GST @12% shall be added at the time of Allotment.