Steel Industries Kerala Limited Tender

Supply and providing pipe earthing as per IS 3043 with 2mtr long 40mm dia B class GI pipe,GI funnel with weld mesh,filling required quantity of charcoal & salt including construction of inspection chember with a bed concrete of 1:4:8 PCC using 40mm broken stone(10cm thick),brick work in cement mortar 1:6,plastering the surface of brick masonary and the exposed surface of PCC bed with cement mortar 1:4:,12mm thick,(the finished inside dimension shall be 300x300x300mm)but excluding test joint,earth continuity conductor to the pipe,and covering at the top(in ordinary soil)

Supply and providing test joint for the earthing system using 2 Nos of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.

2 x 25 x 3 mm G.I strip

Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required.

2 x 25 x 3 mm GI strip

Supply and laying strips of the following sizes along with wiring/ cables and giving connection as required.

25 x 3 mm GI strip

Supply and laying bare earthing conductors of the following sizes laid 0.6 m below ground level including excavating trench of suitable size and refilling etc. as required (in ordinary soil).

25 x 3 mm GI strip

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required

25 x 6 mm GI bolt & nut

Supplying , threading , laying and jointing of the following sizes of 'B' class GI pipe with all required accessories in ground in the existing trench as protective covering to earth leads.

40mm

Earth work excavation in ordinary soil and depositing with a lead up to 50 m and lift up to 1.50 m including neat banking

Plain cement concrete 1:4:8 using 40mm ( Normal size ) broken stone. ( m3 )

Form work for reinforced cement concrete in slabs including wooden planks, joists, bamboo posts and labour for taking down after completion of work (Hire and labour charges only)

Colour washing, two coats

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required.

32 mm dia light gauge

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required.

3.15 mm GI conductor (10 SWG)

Supply & laying of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).

4 core 6 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.

4 core 6 sq mm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

4 core 6 sq mm with factory made clamp

Supplying siemens / tropodur type nickel plated Double compression brass cable gland for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable for 2/ 3/ 3½/ 4 core cable of the following sizes as required.

6 sq mm

Supplying and providing earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required.

4sqmm-16 sq mm with thick clip

Supply of superior quality aluminium reducer (banana) cable socket and making core termination of cables of the following sizes including crimping etc. as required.

6 sq mm

Fabrication, supply & installation of dust and vermin proof, wall mounting, thermoplastic meter box of folowing size suitable for fixing KSEB meter,fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit.

600x300x214mm

Fabrication, supply, conveyance and installation of angle iron frame work for wall mounting panel board using suitable size angle iron cut and welded to shape including painting with two coats of synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel using required bolt and nuts, fixing the whole to the wall, making good the damages etc. as required.

Supply and fixing the following accessories in the existing meter board and giving connections etc.

32 A fuse holder for BS type blade fuses.

2 Way Neutral link

32 A, 415 V, 2 way neutral link mounted on DMC/ SMC base.

S & F following HRC fuses

20-32 A, clip-on offset tag fuse link of size f1

Supplying , threading , laying and jointing of the following sizes of 'B' class GI pipe with all required accessories

50mm(for using KSEB service wire supporting )

Supply and fixing of granite plaque with tha name of work, name of MLA,Fund details,year,estimate amount,implementing Agency

Fabrication supply,conveyance and installation of angle frame iron for four sides of the mast for installing name board of MLA with ACP sheet and reflecting sticker

KSEB Charge & P W D charges including all liason work

Supply and Installation of 12 mtr High Mast System (Motorised) with 6 nos. of 200 W LED Flood light

Supply and installation of High Mast system as per following specification (a) Supply 12 Mtr High Mast system with its accessories .Mast shaft shall be in single or two section, Galvanisation of single hot dipped, suitable for wind velocity as per IS 875 Head frame assembly 2 point suspention system with steel wire rope 5 mm dia (7/19 construction) and double drum winching system arrangement conforming to IS with galvanised lantern carriage suitable for accommodating 6Nos flood light luminaires symmetrically and its control gear box and lightining spike. The mast shall have an integral single phase operation power tool installed inside the base compartment for its operation.(b) Supply and conveyance foundation bolt made of special steel along with nuts, washers, anchor plates and templates(c) Supply, erection, testing and commissioning of LED aviation obstruction light(d) Supply and erection control box consists of 1 No. 25A 2 pole MCB incomer, 25A 2 pole 30mA RCCB,32A 2 Pole AC I rated power contactor with lNO+lNC auxiliary contacts & with AC coil, single dial 24 hour timer with changing facility and suitable contactor for automatic operation, suitable size connection cable from control panel to flood light fittings and shall also consists of suitable control for power tool single phase motor and giving connection.(e) Construction of suitable shallow foundation with l:2:4 Concrete for the high mast considering the safe soil bearing capacity at site as l0 T/Sqmtr at 2 Meter depth with reiforcement for RCC works, bend tied and placed in position (plain grill requiring bend cold ) using for steel including form work for reinforced cement concrete and excavation of soil including neat banking. (f) Erection and commissioning of the above high mast with the help of crane/derrick and other suitable equipment and wiring of luminaries with wiring materials (Bajaj/equivalent) g)Installation, testing and commisioning of 6 no.s of 200W LED flood light luminaire supplied by SILK. contractor should take delivery of led flood lights fom SILK stores during warranty period (3 years)and do the necessary replacement at sites.

Fabrication of fully partioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using 1.60 mm CRCA sheet as per approved designand requirement, with front and rear access faciiity, bus bar chambers, hinged doors for all switch gear comparcments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps bus bar interconnection etc, detachable .covers, for bus bar chamber and cable alley, painting the assembly with 2 coats ". syntheticenamel paint over a coat of zinc chromate primer etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slottedangles etc shall not be used for the fabrication of panel assembly. The measurments should be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc. including control wiring

Supply and fixing the following types of beeding along the periphery of doors/ other detachable compartments to make the panel assembly dust & vermin proof including sticking with glue

A' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

Fabrication, supply, conveyance and installation of angle iron frame work for wall mounting panel board using suitable size angle iron cut and welded to shape including painting with two coats of synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel using required bolt and nuts, fixing the whole to the wall, making good the damages etc. as required.

Supply and fixing the following accessories in the existing meter board and giving connections etc.

32 A,415 V Backelite fuse fitting

32 A, 415V , 2 way neutral link mounted on DMC/SMCbase.

20-32 A, clip-on offset tag fuse link of size fl

Aluminium anodised Danger Notice Board of size 150 x 100 mm.with inscriptions (both in English and Malayalam) and conventional Skull and Bone in Red colour.

Supply and wiring with 650/1100 V grade PVC i-nsulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices equipments including providing suitable size sockets at the termination points. Keeping the wiring firm by' suitable tie /tie mounts PVC duct etc as required..

4.00 sq mm single run withithout sockets

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.lKV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.

2 core 10 sq mm

Supplying siemens' tropodur type nickel plated Double compression brass cable gland for PVC insulated and PVC sheathed armoured aluminium copper conductor cable 1.1 KV grade. and making end termination suitable for 2 /3/ 3.5/4 core cable of the following sizes as required.

l0 sq mm

Supplying and providing earth clamps for siemens tropodur typecable glands of suitable length and other dimensions noted along cable glands of suitable length and other dimensions noted along cable glands of suitable length and other dimensions noted along with each size of glands for the follouing sizes of cables as required.

4sqmm-16 sq mm with 12 mm wide x 1 mm thick clip

Supply of superior quality aluminium tubular iable socket and making core termination of cables of the following sizes including crimping etc. as required..

10 sq mm

Supply route marker with l02mmx102mm cast iron, spike 5mm thick with inscription 'LT Cable' there on bolted / welded to 35x35x6rnm angle iron 60cm long and fixing the same in ground as required..

Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in hard soil 0.75m below ground level including excavation

40/32 mm or nearest size

Supply and fixing the folloting sizes of PVC Conduit conforming to IS 9537 I 1983 part III arong with arl required accessories on existing pole/ concrete etc. as service/protection pipe as required

32 mm dia light gauge

Supply and providing pipe earthing as per IS 3043 with 2 Mtr long 40mm dia b-Class GI Pipe,GI funnelwith weld mesh filling required quantity of charcoal and solt including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40mm broken stone (10cm thick)brick work in cement mortar 1:6 plastering the suface of brick masonary and the exposed surface of pcc bed with cement mortar 1:4:,12mm thick,(the finished inside dimension shall be 300x 300x300mm)but excluding the test joint earth continuity conductor to the pipe and covering at the top (in ordinary soil)

Supply and providing the following sizes of cast iron gully trap with covering at the top of the inspection chamber of earth pit as required

300 x 300 x 6 mm cast iron gully trap with covering

Supply and providing test joint for the earthing system using 2 Nos of the following sizes of srrips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.

2x25 x 3 mm GI strip

Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test ioint etc as required..

25 x 3 mm GI strip

Supply and drau'ine bare earthing conductors of the foilowing sizes along with wiring cables and giving connection as required

3.15 mm copper conductor (10 SWG)

25 x 3 mm GI strip

Supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required.

3.15 mm (10SWG)

Supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required.

25 x 6mm brass bolt & nut

25 x 8 mm GI bolt & nut

Fabrication ,supply, conveyance and installation of Granite name board indicating the cost involved, the commencement, completion and inauguration date etc.

Charges for KSEB connection including all laison works (Actual Amount paid on production of receipt).