National Centre For Earth Science Studies Tender

Panel for Additional Requirements in NCESS

SITC of compartmentalised MV panel made of 2 mm thick sheet steel having a surface area of approximately 2.34 sq.m and a depth of 300 mm welded on a suitable base frame duly painted with powder coating of the 7 tank process,suitable for operation on three phase,415V,50 Hz,AC supply including providing 4 strips busbars of capacity 200 A and size 50X6 mm copper with DMC/SMC bus bar supports as per specifications and provisions for top and bottom cable entry,providing 3mm thick gland plates,earth bar,cable alleys at the sides and bottom,strip/round copper bars for connections including supplying and fixing the following switch gears,instruments and CTS,providing connections,testing,commissioning etc complete as required , a , 200 A,TPN - 1 Nos , b , 100 A, TPN - 4 Nos c , 63 A,TPN - 10 Nos d , Combined digital multi-fuction meter with V,A,F,PF,KW,KVA,Load Hours -1 No, e , 200/5 A CTs,10 VA -3 Nos f , LED pilot lamps with toggle switch and 2 A back up HRC fuse -3 Sets

Providing substation keyboard of size 600 x 450 x200 mm deep made of 2 mm thick MS sheet with front glays and locking arrangement including fixing on a suitable location painting etc as required.