Kerala State Nirmithi Kendra Tender
... More
The KESNIK has issued a formal invitation for competitive bids for the Kerala State Nirmithi Kendra project, for Setting Up Of 10 Bedded Geriatric At District Hospital Nedumangad Thiruvananthapuram in Thiruvananthapuram, Kerala, with an estimated contract value of Rs. 64,72,238. The bid opening date for this tender is 24-04-2025 and the last date for bid submission is 03-05-2025. Interested bidders for Kerala State Nirmithi Kendra tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Kerala State Nirmithi Kendra - KESNIK Tender
Civil And Construction
Building Construction
Eprocure
Opening Date24 Apr 2025
Closing Date3 May 2025
Tender Amount₹ 64,72,238
Costs
EMD
₹ 50,000Document Cost
₹ 2,500Tender Fee
Refer Documents
Summary
Setting Up Of 10 Bedded Geriatric At District Hospital Nedumangad Thiruvananthapuram
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_KSNK_761620_1Bid Award Id
ViewTender No
KSNK/TECH/NHEC/BGN-375R1/2024Tender Authority
Kerala State Nirmithi Kendra ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
15.7.4
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
0.18
-
-
... More
15.56
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead
417.03
-
-
... More
15.3
Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge
4.12
-
-
... More
14.1.1
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
2.75
-
-
... More
50.6.1.7
Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
33.32
-
-
... More
13.7.2
12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)
707.66
-
-
... More
50.13.1
9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete
65.89
-
-
... More
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,beams, plinth beams, girders bressumers and cantilevers
111.75
-
-
... More
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
51.5
-
-
... More
5.2.2
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
14.29
-
-
... More
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
1714.56
-
-
... More
9.147.5
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After
fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes and silicon sealant shall be paid separately)<br> Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm).
43.74
-
-
... More
9.95.3
Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not
less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or
shade with necessary screws etc. complete:100x75x4 mm
32
-
-
... More
9.100.1
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not
less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or
shade, with necessary screws etc. complete:125 mm
16
-
-
... More
9.83
Providing and fixing aluminium die cast body tubular type universal hydraulic door
closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight
upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc.
complete.
8
-
-
... More
9.97.3
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not
less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade,
with necessary screws complete:200x10 mm
8
-
-
... More
9.101.1
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised
(anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to
required colour and shade, with necessary screws etc. complete.Single rubber stopper
8
-
-
... More
21.13
Providing and fixing 100 mm brass locks ( best make of approved quality ) for
aluminium doors including necessary cutting and making good etc. complete
8
-
-
... More
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash
fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminnium snap beading for
glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash
fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating
50 micron)
390.96
-
-
... More
21.3.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness
86.77
-
-
... More
21.2.2
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer
or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling
fixed in aluminum doors, windows shutters and partition frames with C.P. brass /
stainless steel screws etc. complete as per architectural drawings and directions of
Engineer - in- Charge.Pre- laminated particle board with decorative lamination on
both sides
76.1
-
-
... More
9.48.2
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with
M.S. flats, square or round bars etc. including priming coat with approved steel
primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
419
-
-
... More
12.53
Providing and Fixing 15 mm densified tegular edged eco friendly light weight
calcium silicate false ceiling tiles of approved texture spintone /cosmos /Hexa or
equivalent of size 595x 595 mm in true horizontal level, suspended on inter locking
metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm
including both side) consisting of main 'T' runner suitably spaced at joints
to get required length and of size 24x38 mm made from 0.33 mm thick (minimum)
sheet, spaced 1200 mm centre to centre, and cross "T" of size 24x28 mm
made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main
'T' of size 24 x 28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm
long spaced between main'T' at 600 mm centre to centre to form a grid of
1200x600 mm and secondary cross 'T' of length 600 mm and size 24x28
mm made of 0.33 mm thick (minimum) sheet to be inter locked at middle of the
1200x600 mm panel to from grid of size 600x600 mm, resting on periphery
walls/partitions on a Perimeter wall angle pre-coated steel of size (24x24x3000 mm
made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mmcentre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15
mm thick densified edges calicum silicate ceiling tiles of approved texture (Spintone /
Cosmos/hexa) in the grid, including cutting / making opening for services like
diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever require. Main
'T' runners to be suspended from ceiling using G.I slotted cleats of size
25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4
mm G.I. adjustable rods with galvanised steel level clips of size of 85x30x0.8 mm,
spaced at 1200mm centre to centre along main 'T' bottom exposed with 24
mm of all T- sections shall be pre-painted with polyster baked paint, for all heights, as
per specifications, drawings and as directed by by engineer-in-charge. Note:- Only
calcium silicate false ceiling area will be measured from wall to wall. No deduction
shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.
The calcium silicate ceiling tiles shall have NRC. value of 0.50 (Minimum), light
reflection > 85% non - combustible as per B.S. 476 part IV, 100% humidity
resistance and also having thermal conductivity < 0.043 w/m 0 KC
416.31
-
-
... More
11.40
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or
more (thickness to be specified by the manufacturer) of Ist quality conforming to IS:
15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red
Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including
pointing the joints with white cement and matching pigments etc., complete.
19.72
-
-
... More
11.36
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622
(thickness to be specified by the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size as approved by Engineer -in-
Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar
1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm,
including pointing in white cement mixed with pigment of matching shade complete
287.8
-
-
... More
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement
and matching pigments etc., complete.Size of Tile 600 x 600 mm
417.03
-
-
... More
OD65974/2024-2025
Supplying and fixing aluminium powder coated channel section(Heavy type)for
providing synthetic curtains including all labour charges cost of materials etc
complete
106.2
-
-
... More
OD65975/2024-2025
Providing and fixing synthetic curtain including cost and conveyance of all
materials,labour charges etc. complete as per standard specifications and directions of the Engineers
254.88
-
-
... More
OD65976/2024-2025
supplying and fixing curtain rods and brackets and other accessories
etc…complete
106.2
-
-
... More
4.1.4
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2
coarse sand : 4 graded stone aggregate 40 mm nominal size)
2.13
-
-
... More
OD69892/2024-2025
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:1/2:3 (1 cement : 11/2
coarse sand : 3 graded stone aggregate 6 mm nominal size)
5
-
-
... More
50.9.12.1
Providing and fixing Thomson Multi wood board or equivalent make, in shelves with
screws and fittings wherever required, edges to be painted with polyurethane primer
(fittings to be paid separately) as per the direction of site Engineer-in-charge
78.55
-
-
... More
9.80
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of
approved quality with necessary screws
37
-
-
... More
9.79.2
Providing and fixing special quality bright finished brass cupboard or ward robe locks
with four levers of approved quality including necessary screws etc. complete.50 mm
36
-
-
... More
OD66927/2024-2025
Supplying and fixing stainless steel auto closer hinges and other accessories
69
-
-
... More
9.115
providing and fixing powder coated telescopic drawer channels 300 mm long with
necessary screws etc. complete as per directions of Engineer -in-charge
18
-
-
... More
9.123
Providing and fixing factory made door frame (single rebate) made out of single piece
extruded solid PVC foam profile with homogeneous fine cellular structure having
smooth outer integral skin having 62 mm width & 32 mm thickness, frame willbe mitred & jointed with self driven self tapping screws of size 38 mm x 4 mm
& PVC solvent cement, including fixing the frame to wall with suitable dia
& length anchor fastener as per manufacturer's specification and direction
of Engineer-in-charge.
40
-
-
... More
9.124.1
Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam
profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness
5 mm. The styles, top & bottom rails shall have one side wall thickness of 15
mm integrally extruded on the hinge side of the profile for better screw holding
power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17
mm x 1 mm, painted with primer, all four corners of reinforcement to be welded or
sealed. Solid PVC extruded bidding (Push fit type) will be set inside the styles and the
rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The
styles and rails will be mitred cut and joint with the help of PVC solvent cement
& self driven self tapping screws. Single piece extruded solid PVC lock rails of
sixe 100mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in
the middle of the lock rail & fixed with styles with the help of PVC solvent
cement & self driven self tapping screws of size 100 mm x 8 mm complete as
per manufacturer's specifications and direction of Engineer -in-charge.Non
decorative finish
13.44
-
-
... More
10.2
Structural steel work riveted, bolted or welded in built up sections, trusses and framed
work, including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete
1703.44
-
-
... More
12.50
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated
thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,
5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18
microns. Sheet should have protective guard film of 25 microns minimum to avoid
scratches during transportation and should be supplied in single length upto 12 metre
or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and
trusses and including cutting to size and shape wherever required.
135.34
-
-
... More
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
83.97
-
-
... More
13.43.1
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface:Water thinnable cement primer
301.79
-
-
... More
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give
an even shade:Two or more coats on new work
301.79
-
-
... More
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two
or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior
primer applied @ 2.20 kg/10 sqm)
359.29
-
-
... More
PLUMBING WORKS
-
-
-
... More
17.3.2
Providing and fixing white vitreous china pedestal type water closet (European type)
with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P.
flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow
arrangement with specials of standard make and mosquito proof coupling of approved
municipal design complete, including painting of fittings and brackets, cutting and
making good the walls and floors wherever required :W.c. pan with ISI marked black
solid plastic seat and lid
6
-
-
... More
18.53.1
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS: 893115 mm nominal bore
13
-
-
... More
17.7.2
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32
mm C.P. brass waste of standard pattern, including painting of fittings and brackets,
cutting and making good the walls wherever require:White Vitreous China Wash
basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap
4
-
-
... More
17.73.2
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats
with CP brass screws with concealed fitting arrangement of approved quality and
colour600 mm long towel rail with total length of 645 mm, width 78 mm and
effective height of 88 mm, weighting not less than 190 gms
4
-
-
... More
17.72
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide
with minimum distances of 37 mm from wall face with concealed fittings
arrangement of approved quality and colour, weighing not less than 88 gms
4
-
-
... More
50.17.1.2
Supplying and fixing CP Towel rod 45cm or nearest available length including cost of
materials and labour charges etc complete as per the direction of site Engineer-incharge.
7
-
-
... More
18.65
Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102
mm, height of 75 mm with concealed fittings arrangements, weighing not less than
106 gms.
11
-
-
... More
18.15.1
Providing and fixing brass bib cock of approved quality :15 mm nominal bore
8
-
-
... More
17.32.2
Providing and fixing mirror of superior glass ( of approved quality) and of required
shape and size with plastic moulded frame of approved make and shade with 6 mm
thick hard board backing :Rectangular shape 453x357 mm
4
-
-
... More
50.17.1.5
Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make )
including cost of materials and labour charges etc complete as per the direction of site
Engineer-in-charge.
6
-
-
... More
50.18.9.12.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm
dia 10Kgf/cm2 External work- Exposed on wall
100
-
-
... More
50.18.9.13.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm
dia 10 Kgf/cm2- External work - Exposed on wall
75
-
-
... More
50.18.9.16.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm
dia 10Kgf/cm2 - External work - Exposed on wall
140
-
-
... More
50.18.9.17.1 Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m
spacing . This includes jointing of pipes with one step PVC solvent cement and
testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6
Kgf/cm2 - External work - Exposed on wall
60
-
-
... More
50.18.9.9.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of Joints complete as per direction
of engineer in charge.110 mm dia 6Kgf/cm2
45
-
-
... More
50.18.9.20.1
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 63 mm dia Elbow
10
-
-
... More
OD65993/2024-2025
Providing and fixing 150mm silt with CP gratings
4
-
-
... More
OD70191/2024-2025
Supplying and fixing stainless steel shower with arm including all labour charges,cost
of materials etc complete
2
-
-
... More
OD70192/2024-2025
Providing and fixing heavy type stainless steel Sink tap and other accessories
1
-
-
... More
OD70193/2024-2025
Supply and fixing 3/4" PVC valve and other accessories
7
-
-
... More
OD70194/2024-2025
Supply and fixing 1" PVC valve and other accessories
5
-
-
... More
OD70195/2024-2025
Supply and fixing 2" PVC valve and other accessories
8
-
-
... More
OD70196/2024-2025
Supply and fixing 2.5" PVC valve and other accessories
10
-
-
... More
18.52.1
Providing and fixing C.P brass stop cock ( concealed) of standard design and of
approved make conforming to IS: 893115 mm nominal bore
2
-
-
... More
OD70460/2024-2025
Supplying and fixing 75mm dia DOWN WATER PIPE and other accessories
32.5
-
-
... More
OD70461/2024-2025
:Supplying and fixing 8" PVC drain duct on roof edge including all labour
charges ,cost
of materials and required number of clamps etc complete
47.21
-
-
... More
OD70464/2024-2025
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 50 mm dia Elbow
5
-
-
... More
OD70766/2024-2025
Shifting & resetting the existing 5000 litre water storage tank from main
building to annex building , including all labour charges , all material charges etc
4
-
-
... More
OD70505/2024-2025
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 50mm dia Bend
5
-
-
... More
ELECTRICAL WORKS
-
-
-
... More
1.10.3
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group C
84
-
-
... More
1.7.1
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of
FRLS PVC
insulated copper conductor, single core cable in surface/ recessed steel conduit as
required2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
75
-
-
... More
1.7.4
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of
FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as
required2 X 6 sq. mm + 1 X 6 sq. mm earth wire
50
-
-
... More
90.11.1.21
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required12 way (8+12) - double cover TPN vertical
DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP
42/43)
1
-
-
... More
90.11.1.20
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required8 way (8+12) - double cover TPN vertical
DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP
42/43)
2
-
-
... More
1.24.3
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.15/16 amp switch
4
-
-
... More
1.24.5
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.6 pin 15/16 amp socket outlet
4
-
-
... More
1.14.2
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of
FRLS PVC insulated copper conductor, single core cable in surface / recessed
medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
95
-
-
... More
1.14.3
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of
FRLS PVC insulated copper conductor, single core cable in surface / recessed
medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
60
-
-
... More
1.25
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as
required.
17
-
-
... More
5.4
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as
required.
1
-
-
... More
5.19
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop
earthing along with existing surface/ recessed conduit/ submain wiring/ cable as
required.
15
-
-
... More
1.26
Supplying and fixing modular blanking plate on the existing modular plate &
switch box excluding modular plate as required
4
-
-
... More
1.27.2
Supplying and fixing following size/ modules, GI box alongwith modular base &
cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
4
-
-
... More
1.28.2
Supplying and fixing following Modular base & cover plate on existing modular
metal boxes etc. as required.3 Module
4
-
-
... More
OD65996/2024-2025
Supplying and fixing 48" Ceiling fan and other accessories
17
-
-
... More
OD67317/2024-2025
Supplying and fixing LED bulb (12 watts) and other accessories
8
-
-
... More
OD67318/2024-2025
Supplying and fixing 9" exhaust fan and other accessories
6
-
-
... More
OD69922/2024-2025
Supplying and drawing 10sqmm aluminum UG cable and giving connection
30
-
-
... More
OD70209/2024-2025 Supplying and Fixing 15W 6" Square LED Panel light
48
-
-
... More
OD70730/2024-2025
Supplying and fixing 32 amp DP Switch including all materials and labour charges
etc.
3
-
-
... More
OD70732/2024-2025
Supplying and fixing Network Cable Cat6 including all materials and labour
charges etc.
150
-
-
... More
OD70733/2024-2025
Supplying and fixing rose set box and giving connection
3
-
-
... More
OD70734/2024-2025
Supplying and drawing two pair telephone cable through 1'' case and
caping and giving connection
100
-
-
... More
OD70735/2024-2025
Supplying and fixing IO box set and giving connection
2
-
-
... More
OD70736/2024-2025
Suplying and fixing ordinary type telephone (BPL make) and other assessories
2
-
-
... More
AMENITIES
-
-
-
... More
OD70668/2024-2025
Supplying water dispenser with RO system of 8 Litre capacity Purification
technology-RO+UV Input Voltage-AC 230V/50 Hz Installation - Wall mounted
Power consumption in watts-24 W Purified water flow rate per hour-Min 8 L
Replacement alarm-Yes Body material-ABS Warranty-1year Applicable TDS level in
ppm-TDS less than 2000ppm and iron less than 0.30ppm TDS reduction %-upto 95%
UV lamp span in hours-6000 Hrs UV lamp watt-11W Water recovery in %-1.4
3
-
-
... More
OD70669/2024-2025
Supplying stainless steel Airport type chair of 3 seater capacity of approved make
10
-
-
... More
OD70689/2024-2025
supply and fixing LG 139 cm (55 inches) 4K Ultra HD Smart LED TV
55UR7500PSC (Dark Iron Gray) , including all labour charges, material charges etc
1
-
-
... More
OD70691/2024-2025
Supplying and fixing fan rod of dia 25 mm and 1.20 m long including painting the
surface etc complete
17
-
-
... More
OD70725/2024-2025
Supplying Medium back chair with S type metal legs
3
-
-
... More
OD70728/2024-2025
Providing and fixing Side Return Table of size 900 mm (l) x 400mm (w) x 650 mm
(h) shall be formed out of 18 mm thick BWR Plywood with 1mm laminate and all
exposed edges lipped with PVC edge banding. Inside portion of the Table will be
covered with 0.8mm laminate .Rates include all materials and labour charges etc
2
-
-
... More
OD70917/2024-2025
PIPELINE DISTRIBUTION SYSTEM Supply, Installation, Testing
andcommissioning of Isolation Valve assembly as per HTM/ EN / NFPA for gas
services.All valve should be gas specific.<br>15 mm
1
-
-
... More
OD70918/2024-2025
PIPELINE DISTRIBUTION SYSTEM<br>Supply, Installation,
Testing and commissioning of Copper Pipe Lloyd Certified as per HTM/ EN / NFPA
for medical gas services. Pipes shall be priced for all necessary supports, standard
fittings.<br>15 mm OD x 0.9 mm thick
50
-
-
... More
OD71397/2024-2025
supply and Installation of High Pressure Regulator with LPG connection Pipe LPG
connection
1
-
-
... More
OD71398/2024-2025
Supply and Installation of Pressure Gauge
1
-
-
... More
OD71400/2024-2025
Supplying Solid drawn, seamless, deoxidised, non- arsenical, half hard, tempered and
degreased copper pipes as per tender technical specifications 12mm OD X 1 mm
thick
52.5
-
-
... More
OD71401/2024-2025
Supplying Solid drawn, seamless, deoxidised, non- arsenical, half hard, tempered and
degreased copper pipes as per tender technical specifications<br>22mm OD X 1 mm thick
50
-
-
... More
OD71402/2024-2025
Supplying Bed Head Horizontal Wall Panel outlet provison
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements