Kerala State Electricity Board Tender

... More
The KSEB has issued a formal invitation for competitive bids for the Kerala State Electricity Board project, for Reconductoring Ht Oh Line From Panthakad Jn To Orbic Ab in Ernakulam, Kerala, with an estimated contract value of Rs. 5,24,287. The bid opening date for this tender is 11-11-2026 and the last date for bid submission is 21-11-2026. Interested bidders for Kerala State Electricity Board tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Kerala State Electricity Board - KSEB Tender - Kerala Tender

Opening Date11 Nov 2026
Closing Soon21 Nov 2026
Tender Amount₹ 5,24,287 
Notes
Download

Costs

  • EMD

    ₹ 13,200
  • Document Cost

    ₹ 1,298
  • Tender Fee

    ₹ 295

Summary

Reconductoring Ht Oh Line From Panthakad Jn To Orbic Ab

Description

Reconductoring Ht Oh Line From Panthakad Jn To Orbic Ab Under Electrical Section Aluva Town

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
RECONDUCTORING HT OH LINE FROM PANTHAKAD JN TO ORBIC AB UNDER ELECTRICAL SECTION ALUVA TOWN
RECONDUCTORING HT OH LINE FROM PANTHAKAD JN TO ORBIC AB UNDER ELECTRICAL SECTION ALUVA TOWN
Report Missing Document

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Fitting one set (3No.) 11kV LA and giving connections excluding earthing.

3

481

1445.85

... More
Providing Cable Tie

120

3

462

... More
Erection of Anchor clamp / dead end clamp for 11kV ABC of any size

64

164

10538.88

... More
Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).

20

762

15242.8

... More
Insertion of one HT PSC pole in existing HT/LT line including digging & back filling of pit in ordinary soil, fitting cross arm, insulator, binding etc. , drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing).

13

4089

53167.66

... More
Transferring LT three phase 4/5 wire OH line to newly erected HT/LT pole including dismantling existing cross arm and insulators, refitting the same on the new pole, binding etc. complete.

7

1778

12448.24

... More
Dismantling one LT 2 line cross arm with clamp from existing pole and stacking.

8

70

560.4

... More
Dismantling one LT 4 line cross arm with clamp from existing pole and stacking.

11

104

1150.05

... More
Fitting one LT 2 line cross arm on HT or LT existing poles including fitting insulators and binding the same with LT Line.

20

140

2801.8

... More
Fitting one LT 4 line cross arm on HT or LT existing poles including fitting insulators and binding the same with LT Line.

11

210

2311.54

... More
Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.

5

1923

9618.2

... More
Dismantling (without damage) LT stay including digging pit in all classes of soil and backfilling.

3

469

1408.23

... More
Dismantling (without damage) one LT PSC/RCC Strut pole including removal of clamps and stacking.

2

1589

3178.18

... More
Fitting and providing one Strut using HT PSC pole including digging and back filling pit in ordinary soil.

2

3056

6113.82

... More
Insertion of one HT PSC pole in existing OH line including digging & backfilling pit in ordinary soil, fitting cross arm, insulators, binding etc., drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing).

2

3433

6866.54

... More
Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole including disconnecting and reconnecting wires.

10

492

4924.1

... More
Disconnecting and lowering down the single phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.

30

96

2885.4

... More
Disconnecting and lowering down the three phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.

15

149

2242.5

... More
Renewing one LT Jumper connection using Copper/ACSR conductor as per standard specification.

15

101

1521.15

... More
Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.

18

868

15637.86

... More
Re-joining one snapped LT conductor after removing damaged portion including Reshackling and conveyance of all materials complete.

5

702

3512.75

... More
Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges.

7

3142

21995.82

... More
Additional rate for refitting/redoing one Shackle Set, including reshacling one span, while renewing any type of LT pole.

40

341

13674.4

... More
Fitting and erecting one HT PSC single pole in position without fitting cross arm, digging & back filling pit in ordinary soil (as per standards), drawing sufficient length of G I earthing leads from top of the post to the ground for earthing (excluding provision for earthing). For drawing HT ABC.

5

2642

13214.55

... More
Fitting and providing one HT Stay for 11kV pole, including digging and back filling pit in ordinary soil.

20

1373

27474.6

... More
Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.

15

434

6523.65

... More
Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles

1700

45

77554

... More
Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane

2

4999

9998.1

... More
Providing one Coil Earth using No.8 GI-earth wire (50mm dia, 115 turns) including digging separate pit (0.45x0.45x1.5m) at standard distance away from the pole/structure in ordinary soil & backfilling.

25

1086

27155.75

... More
Providing one Driven Earth using GI earth pipe of size 38.1mm dia, 2.5m length at minimum distance of 1.5m away from the pole/structure and maintaining standard distance between different earth pipes in loose soil.

15

592

8891.55

... More
Erection of suspension clamp for 11KV ABC of any size

55

164

9056.85

... More
Dismantling (without damage) one km 11kV line (three conductors) including dismantling cross arm, insulators, disc, disconnecting jumper connection, rolling the conductor and stacking the materials.

1.7

13827

23506.21

... More
Labour charges for loading HT A type pole from the stacking place and unloading the same at work site (transportation by any vehicle).

5

906

4532.05

... More
Additional rate for refitting/redoing one Disc set while renewing any type of 11kV cut pole.

27

722

19505.07

... More
Insertion of one HT A type pole in existing OH line including digging & backfilling pit in ordinary soil, fitting cross arm, insulators, binding etc., drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing).

2

4302

8604.1

... More
Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.

3

3129

9387.15

... More
Dismantling (without damage) one V cross arm/Channel cross arm from existing Pole and bringing back to section store.

5

192

961.8

... More
Additional rate for excavation of Pit for A type pole in Hard Laterite.

3

1303

3911.04

... More
Additional rate for excavation of Pit for A type pole in Laterite.

2

651

1302.64

... More
Providing concrete muffing of size 0.45x0. 45x1.5m (0.5m above GL and 1m below GL). Excavation 0.45x0.45x1m, concrete (1:3:6, 20mm) 0.45x0.45x1.5m, Plastering (1:3) 12mm 0.45x0.45mx5sides.

5

4028

20141.45

... More
Fitting and erecting one HT ‘A ‘type single pole in position without fitting cross arm, digging & back filling pit in ordinary soil (as per standards), drawing sufficient length of G I earthing leads from top of the post to the ground for earthing (excluding provision for earthing). For drawing HT ABC.

3

3661

10983.57



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.