Kerala Police Housing And Construction Corporation Limited Tender
... More
The KPHCCL has issued a formal invitation for competitive bids for the Kerala Police Housing And Construction Corporation Limited project, for Scheme For Special Assistance To State For Capital Investment 2023-24-construction Of Contonment Police Quarters 10nos Of Lsqs At Palayam,thiruvananthapuram (dsr 2018) in Thiruvananthapuram, Kerala, with an estimated contract value of Rs. 4,79,69,167. The bid opening date for this tender is 26-03-2025 and the last date for bid submission is 21-04-2025. Interested bidders for Kerala Police Housing And Construction Corporation Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Kerala Police Housing And Construction Corporation Limited - KPHCCL Tender
Opening Date26 Mar 2025
Closing DateCancelled
Tender Amount₹ 4,79,69,167
Technical
Technical
Additional Eligibility
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is Class A/B/C/D.
Technical Capacity
... View More
The required prior work experience for the bidder includes: * For Works Manager: - 3 years experience (for one source) - 5 years experience (for another source)
* For Site Engineers: - 1 year experience (for one source) - 2 years experience (for another source) No information is available on the value and percentage of similar works completed, including amounts and percentages.
Costs
EMD
₹ 1,00,000Document Cost
₹ 8,850Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_KPHCC_755302_1Tender No
NIT No.222/KPHCC/2024-25Tender Authority
Kerala Police Housing And Construction Corporation Limited ViewPurchaser Address
-Website
http://https://kphccltd.kerala.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
17.1.3
FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying,
installation, testing & commissioning of manual call boxes of MS Construction
in surface/recess with stainless steel chain & hammer assembly Complete with
glass and push button etc. as required
5
-
-
... More
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.Thermo - Mechanically
Treated bars of grade Fe-500D or more
65570
-
-
... More
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
282
-
-
... More
OD45156/2024-2025
Providing and fixing Soap Dish of approved quality Make:
Jaquar/Hindware/Parryware/Equivalent" (modified)
Net Total 20.000each @1008.83/each 2
20
-
-
... More
50.18.9.20.2
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -63 dia 45 degree Elbow
5
-
-
... More
OD45165/2024-2025
:Providing and fixing of sink cock with wall flange of approved quality Make: Jaquar
/ Hindware/ Parryware /Equivalent
10
-
-
... More
90.17.18.2
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Stainless Steel (Grade 304)
6
-
-
... More
5.9.7
Centering and shuttering including strutting, etc. and removal of form for:Stairs,(excluding landings ) except spiral - staircases)
102.6
-
-
... More
50.18.8.4.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 32 mm pipe
6Kgf/cm2
33
-
-
... More
22.23.2
Providing and applying integral crystalline slurry of hydrophilic in nature for
waterproofing treatment to the RCC structures like retaining walls of the basement,
water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels
/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts
integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts
integral crystalline slurry : 1 part water) for horizontal surfaces and applying the
same from negative (internal) side with the help of synthetic fiber brush. The material
shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing
permeability of concrete by more than 90% compared with control concrete as per
DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The
crystalline
slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work
shall be carried out all complete as per specification and the direction of the
engineerincharge. The product performance shall carry guarantee for 10 years against any
leakage.For horizontal surface one coat @1.10 kg per sqm.
12.93
-
-
... More
50.18.9.22.1
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110 mm dia Elbow
8
-
-
... More
50.18.9.10.1
Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent
cement, trenching , refilling & testing of joints complete as per direction of Engineer
in Charge. 150 mm dia 6 Kgf/cm2
75
-
-
... More
OD85567/2024-2025 Piping- Supply, erection, testing and commissioning of above ground piping of approved make medium quality MS"B" class pipes with
branded malleable specials conforming to IS 1239 part 1 & 2 such as tees, elbows, unions,flanges, nipples etc. including cutting, welding and painting the exposed pipes with one coat of zinchromate primer and two coats of PO red enamel paint. The pipes shall be supported suitably..- 100mm dia (Make: Tata/Jindal)
130
-
-
... More
OD45136/2024-2025
Providing water cutting on the border of sunshade and roof slab projection in
CM1:3,15mm thick and of 25mm wide including watering, curing, cost and
conveyance of all materials and labour charges etc. complete
432
-
-
... More
90.11.1.11
Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP 42/43)
11
-
-
... More
9.122.1
Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced
Plastic (FRP) panelled door shutter of required colour and approved brand and
manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to
3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and
suitable blocks of seasoned wood inside at required places for fixing of fittings, cast
monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856,
including fixing to frames.
30
-
-
... More
20.2.5
Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of
grade M-25 of specified diameter and length below the pile cap to carry a safe
working load not less than specified, excluding the cost of steel reinforcement but
including the cost of boring, with bentonite solution and temporary casing of
appropriate length for setting out and removal of same and the length of the pile to be
embedded in the pile cap etc. all complete, including removal of excavated earth with
all lifts and leads (Length of pile for payment shall be measured upto bottom of pile
cap).600 mm dia piles
1470
-
-
... More
50.18.9.22.4
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement- 110 mm dia Bend
10
-
-
... More
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete upto plinth levelThermo - Mechanically Treated
bars of grade Fe-500D or more
1890
-
-
... More
5.9.2
Centering and shuttering including strutting, etc. and removal of form for:Walls (any
thickness) including attached pilasters, butteresses, plinth and string courses etc.
107.68
-
-
... More
90.17.11.5
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with
bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets
conforming to IS 13095 of following sizes as required100 mm dia
4
-
-
... More
50.18.8.7.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes with one step PVC solvent cement and
testing of joints complete as per direction of Engineer-in-Charge. Concealed work,
including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2
18
-
-
... More
13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
82.4
-
-
... More
17.2.1
Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including
flush pipe, with manually controlled device (handle lever), conforming to IS : 7231,
with all fittings and fixtures complete, including cutting and making good the walls
and floors wherever required:W.C. pan with ISI marked white solid plastic seat and
lid
N
20
-
-
... More
50.18.9.20.4
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 63 mm dia Bend
8
-
-
... More
90.16.5.4
Supply of superior quality copper earth socket for the following size of earth
conductor including crimping etc. as required.4.00 mm (8 SWG)
13
-
-
... More
OD85596/2024-2025
ABC FIRE EXTINGUISHER -Supply and installation of ABC Stored pressure type
Fire Extinguisher 4 Kgs Capacity Mono Ammonium Phosphate based Dry
Chemical Powder as per IS 14609 with ISI Mark for Fighting ABC Class of Fire,
stored Pressure type of Mild steel body pressurized by Nitrogen Gas. The
Extinguisher shall have pressure gaugefor indicating inside pressure with opening
and closing lever of squeeze grip type with tamper proof seal, complete with wall
bracket. The Extinguisher should be manufactured strictly as per IS: 15683:2006
with ISI mark.(Make: Safex/Safepro/Kanex)
4
-
-
... More
21.3.3
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm
thickness
25.5
-
-
... More
1.33
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
420
-
-
... More
90.4.5.4
Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply
40
-
-
... More
4.2.3
Providing and laying cement concrete in retaining walls, return walls, walls ( any
thickness) including attached pilasters, columns, piers, abutments, pillars, posts,
struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks,
plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost
of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
14.4
-
-
... More
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended
floors, roofs, landings, balconies and access platform
32.31
-
-
... More
OD45172/2024-2025
Supply and providing 1 ft. mirror lamp of approved make as instructed by engineer incharge
27
-
-
... More
9.48.2
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with
M.S. flats, square or round bars etc. including priming coat with approved steel
primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
1932
-
-
... More
50.18.9.17.2
Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m
spacing. This includes jointing of pipes with one step PVC solvent cement and testing
of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2-
External work - exposed on wall
20
-
-
... More
OD45158/2024-2025
Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make )
including cost of materials and labour charges etc complete as per the direction of site
Engineer-in-charge. (Modified 50.17.1.5)
20
-
-
... More
OD45159/2024-2025
Providing and fixing C.P. brass pillar tap (Jaguar or equivalent )of approved quality
conforming to IS standards and weighing not less than 690 gms.
15 mm nominal bore
20
-
-
... More
1.58
Supplying and fixing PVC batten/ angle holder including connection etc. as required
20
-
-
... More
50.18.9.22.6
Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110x110x110 mm dia Door tee
10
-
-
... More
17.31
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved
quality) complete with 6 mm thick hard board ground fixed to wooden cleats with
C.P. brass screws and washers complete.
20
-
-
... More
50.6.1.3
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm
or nearest available size confirming to IS 2185 Part I of 1979 for super structure
above floor two level up to floor V level thickness 20cm and above in: CM 1:6 ( 1
cement :6 coarse sand) etc complete
265.39
-
-
... More
OD45171/2024-2025
Supply and providing 18W Surface Mounted LED of department approved make as instructed by engineer in charge
38
-
-
... More
2.15.3
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
10
-
-
... More
50.18.9.15.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm
dia 6 Kgf/cm2 - External work - Exposed on wall
60
-
-
... More
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,
beams, plinth beams, girders bressumers and cantilevers
29.28
-
-
... More
OD45169/2024-2025
Supply and providing 9W LED Bulb of department approved make in the existing batten holder.
20
-
-
... More
9.20.1
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)
decorative type, core of block board construction with frame of I st class hard wood
and well matched teak 3 ply veneering with vertical grains or cross bands and face
veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel
butt hinges with necessary screws
20
-
-
... More
Electrical Works
-
-
-
... More
1.24.3
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.15/16 amp switch
75
-
-
... More
5.9.1
Centering and shuttering including strutting, etc. and removal of form
for:Foundations, footings, bases of columns, etc for mass concrete
566.86
-
-
... More
OD85612/2024-2025
HOOTER- Supply, installation, testing and commissioning of Electronic dual tone
Hooter (Sounder) as per standard specification.(Make: Agni/Ravel)
4
-
-
... More
OD85569/2024-2025
AIR RELEASE VALVE- Supply, installation, testing and commissioning of
gunmetal air release valve 25 mm with necessary fittings etc. complete. (Make:Arihant/Karthar/Atom)
1
-
-
... More
2.31
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and
saplings of girth up to 30 cm measured at a height of 1 m above ground level and
removal of rubbish up to a distance of 50 m outside the periphery of the area cleared
945
-
-
... More
1.27.2
Supplying and fixing following size/ modules, GI box alongwith modular base &
cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
75
-
-
... More
90.3.11
Conveyance, installation, testing and commissioning of surface mounting down light fittings of all types directly on ceiling including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing
etc as required.
38
-
-
... More
90.17.16.2
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel (Grade 304)
6
-
-
... More
50.18.9.20.8
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 63 mm dia End cap
4
-
-
... More
50.18.9.22.5
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes
including jointing with PVC solvent cement 110x110x110 mm dia Tee
8
-
-
... More
1.50.1
Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep
35
-
-
... More
50.18.9.5.2
Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of joints compete as per direction of
Engineer in Charge. 40 mm dia 6 Kgf/cm2
65
-
-
... More
50.18.9.22.8
Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -110 mm dia Vent cowl
16
-
-
... More
1.17.3
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X
1.5 sq.mm
N
500
-
-
... More
1.26
Supplying and fixing modular blanking plate on the existing modular plate & switch
box excluding modular plate as required.
50
-
-
... More
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
60338.4
-
-
... More
1.24.8
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as required.Bell push
10
-
-
... More
Sump tank
-
-
-
... More
1.21.1
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.20 mm
400
-
-
... More
5.33.2
Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work above plinth level upto floor V level
11.75
-
-
... More
1.17.12
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x
2.5 sq. mm
850
-
-
... More
OD85562/2024-2025
TERRACE PUMP- Supply, erection, testing and commissioning of Electrical
driven Terrace pump with all necessary valves and fittings comprising as follows:Electrical motor driven pump capable of delivering 450 LPM at a head of 18Mtrs electrical motor fitted in a common base plate, coupling and coupling guard complete. (make . Kirloskar/ LUB)
1
-
-
... More
1.27.1
Supplying and fixing following size/ modules, GI box alongwith modular base &
cover plate for modular switches in recess etc as required.1 or 2 Module
(75mmX75mm)
42
-
-
... More
OD85559/2024-2025
DOL PANEL- Supply, installation, testing and commissioning of motor control panel for the Terrace pump for fire fighting including all necessary control wiring with indication lamps and meters
1
-
-
... More
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended
floors, roofs, landings, balconies and access platform
19.2
-
-
... More
1.24.5
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as required.6
pin 15/16 amp socket outlet
Net Total 75.000each
75
-
-
... More
5.33.1 Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work upto plinth level
183.49
-
-
... More
17.28.1.1
Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.
waste fittings complete.
Semi rigid pipe32 mm dia
48
-
-
... More
20.6.3.1
Vertical load testing of piles in accordance with IS 2911( Part IV) including
installation of loading platform and preparation of pile head or construction of test
cap and dismantling of test cap after test etc. complete as per specification & the
direction of engineer -in-Charge.
Group of two or more piles upto 50 tonne capacityInitial test
1
-
-
... More
50.18.9.20.1
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 63 mm dia Elbow
5
-
-
... More
2.13.1
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40amps
1
-
-
... More
1.14.9
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of
FRLS PVC insulated copper conductor, single core cable in surface / recessed
medium class PVC conduit as required4 X 6 sq. mm + 2 X 6 sq. mm earth wire
330
-
-
... More
OD85573/2024-2025
FIRE BRIGADE INLET - Supply, installation, testing and commissioning of 2 way Fire Brigade Inlet connection of 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type arrangement to be connected to wet riser main.(Make: Arihant/Newage/Karthar)
1
-
-
... More
1.21.1
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.20 mm
1550
-
-
... More
1.38
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
10
-
-
... More
20.6.1.1
Vertical load testing of piles in accordance with IS 2911( Part IV) including
installation of loading platform and preparation of pile head or construction of test
cap and dismantling of test cap after test etc. complete as per specification & the
direction of engineer -in-Charge.
Single pile upto 50 tonne capacityInitial test
1
-
-
... More
9.53
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size)
496
-
-
... More
5.9.6
Centering and shuttering including strutting, etc. and removal of form for:Columns,Pillars, Piers, Abutments, Posts and Struts
1160.36
-
-
... More
OD45163/2024-2025 Providing and fixing in position C.P towel rail, including cost of all materials (
wooden plugs, steel screws etc.) and labour charges etc. complete. Make:
Jaquar/Hindware/Parryware/Equivalent
20
-
-
... More
21.3.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness
100.1
-
-
... More
10.26.1
Providing and fixing hand rail of approved size by welding etc. to steel ladder railingbalcony railing, staircase railing and similar works, including applying priming coat
of approves steel primer.M.S. tube
2104.11
-
-
... More
OD45167/2024-2025
Supply and providing of 200 mm sweep Light Duty Exhaust fan in plastic body with self opening lowers working on 230v single phase A/C of department approved makes with rated speed of 1350 revolution per minute and air delivery of 520m
27
-
-
... More
OD49933/2024-2025
Providing and fixing powder coated Galvalume Trafford sheet 0.45 mm thick up to
any pitch and fixing with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I.
plain and bitumen washers or with self drilling fastener and EPDM washers etc.
complete (excluding the cost of purlins, rafters and trusses), including cutting sheets
to size and shape wherever required.
56
-
-
... More
5.9.1
Centering and shuttering including strutting, etc. and removal of form
for:Foundations, footings, bases of columns, etc for mass concrete
6
-
-
... More
OD45152/2024-2025
Supply and fixing 110 mm SS Gratings.
20
-
-
... More
50.18.9.20.6
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -63x63x63 mm dia Door Tee
6
-
-
... More
OD45168/2024-2025
Supplying and fixing 63 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole
4
-
-
... More
1.31
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
140
-
-
... More
OD85571/2024-2025
BALL VALVE- Supply, installation, testing and commissioning of Ball valve of
following dia- 20 mm (Make: Zoloto/Karthar)
6
-
-
... More
90.12.7.44
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 50 sq mm
40
-
-
... More
17.7.2
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32
mm C.P. brass waste of standard pattern, including painting of fittings and brackets,
cutting and making good the walls wherever require:White Vitreous China Wash
basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap
20
-
-
... More
10.5.2
Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle
iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings
complete, including applying a priming coat of approved steel primer.Using flats
30x6 mm for diagonal braces and central cross piece
2.1
-
-
... More
50.6.1.2
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm
or nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc
complete.
141.79
-
-
... More
1.24.6
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.Telephone socket outlet
10
-
-
... More
9.22.1
Extra for Providing and fixing flush doors with decorative veneering instead of non
decorative ISI marked flush door shutters conforming to I.S. 2202 ( part I)On one side
only
86.4
-
-
... More
50.18.8.3.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 25 mm pipe
10kgf /cm2
30
-
-
... More
50.18.8.9.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes with one step PVC Solvent cement and
testing of joints complete as per direction of Engineer-in-Charge. Concealed work,
including cutting chases and making good the wall etc. 110 mm pipe 4 kgf/cm2
24
-
-
... More
OD45154/2024-2025
Providing and fixing 110mm PVC Multi floor trap
20
-
-
... More
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
155.22
-
-
... More
OD45148/2024-2025
Supplying and fixing 300 mm Ornamental brass type aldrob
1
-
-
... More
5.33.2
Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work above plinth level upto floor V level
477.04
-
-
... More
OD46838/2024-2025
Providing and laying Ceramic anti skid floor tiles of size 300x300 mm (thickness to
be specified by the manufacturer), of 1st quality conforming to IS : 15622, of
approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20
mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints
with white cement and matching pigment etc., complete.
77.44
-
-
... More
13.80
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
3387.49
-
-
... More
OD45173/2024-2025
Supply and providing 10W LED Bulk head with IP 65 rating of approved make as instructed by department engineer in charge
10
-
-
... More
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement
and matching pigments etc., complete.Size of Tile 600 x 600 mm.
959.13
-
-
... More
1.17.3
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X1.5 sq.mm
1600
-
-
... More
OD45164/2024-2025
Constructing silt pit 20 x 20cm up to 60 cm depth inside dimension in half brick thick
walls in CM all-round over brick jelly concrete in CM 1:3 for foundation 15 cm thick,
plastering with CM 1:3, 12 mm thick with neat cement flushing coat, etc. complete
including providing 2 nos. heavy CI gratings, 150 x 150 mm and 180 x 180 mm for
the inside and outside , painted with black Japan two coats and necessary earth work
excavation etc. complete.
12
-
-
... More
90.10.3.15
Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator
20
-
-
... More
OD85564/2024-2025 Piping- Supply, erection, testing and commissioning of above ground piping of approved make medium quality MS"B" class pipes with branded malleable specials conforming to IS 1239 part 1 & 2 such as tees, elbows, unions,flanges,nipples etc. including cutting, welding and painting the exposed pipes with one coat of zinc chromate primer and two coats of PO red enamel paint. The pipes shall be supported suitably- 80mm dia (Make: Tata/Jindal)
29
-
-
... More
11.48.3
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout
mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg
of resin per kg). including filling /grouting and finishing complete as per direction of
Engineer-in-charge.Size of Tile 800x800mm
1375.3
-
-
... More
2.13.2
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.63
amps
11
-
-
... More
5.33.1
Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work upto plinth level
13.6
-
-
... More
13.7.1
12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1
cement : 3 fine sand)
28.27
-
-
... More
50.18.9.22.7
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110x110x75 mm dia Door Tee
8
-
-
... More
OD45174/2024-2025
Fabrication and supply LT panel board, out of 16swg crca sheet,
removable gland plate, under gone 7 tank process after powder
coating etc as required, The panel board shall be cubicle indoor type,
dust and vermin proof, The bus bars should be of suitable rated TPN
Aluminium busbar having the specified normal and short circuit
capacities and should be insulated with heat shrinkable color coded
PVC sleeves and supported by DMC/SMC type bus bar supports.
Frond openable doors, Designing and fabrication of the switch
boards should be as per standards of state electrical inspectorate, the
assembly must generally confirm to IS 8623 and IP55 protection, all
interconnection and internal wiring etc.
Metering Panel-1
Busbar- 250A TPN Al Busbar
Incoming:
250A 4P ISO -1No.
Outgoing:-
Provision for 1No. KSEB Direct three phase Meter,3Nos. 63A Fuse Base with
HRC,1No. 63A 4P MCB ISO-13set
Metering:-
RYB Indication - 1Set.
1
-
-
... More
50.9.1.1
Providing wood work in frames of doors, windows, clerestory windows and other
frames, wrought framed and fixed in position with hold fast lugs or with dash
fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for
separately), using good quality Anjili wood /jack wood
1.94
-
-
... More
1.17.12
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x
2.5 sq. mm
400
-
-
... More
OD45139/2024-2025
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality (GODREJ make) with necessary screws etc. complete.
50
-
-
... More
11.36
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622
(thickness to be specified by the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size as approved by Engineer -inCharge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar
1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm,
including pointing in white cement mixed with pigment of matching shade complete.
308.74
-
-
... More
90.15.4.3
Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
8
-
-
... More
OD85581/2024-2025
HYDRANT VALVE- Supply, erection, testing and commissioning of single headed Hydrant valve stainless steel with ISI mark as per the IS specification fitted to 80mm dia pipe .(Make: Arihant/Newage/Karthar)
6
-
-
... More
90.17.14.5
Providing, installation, testing and commissioning of non-return valve of following
sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers
etc.as required :100mm dia
1
-
-
... More
90.6.9.2
Supplying & Drawing unarmored PVC insulated and & PVC sheathedcopper
conductor Telephone Pair Cable conforming to ITD specification for indoor
application through the existing conduit2 pair
175
-
-
... More
21.1.2.2
For shutters of doors, windows & ventilators including providing and fixing hinges /
pivots and making provision for fixing of fittings wherever required including the
cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for
separately)Powder coated aluminium (minimum thickness of powder coating 50
micron)
742.28
-
-
... More
OD45132/2024-2025
Providing and fixing bright finished Stainless Steel Tower Bolts (barrel type) with
necessary screws etc. complete: 250x10 mm (9.74.1 modified )
60
-
-
... More
90.10.3.33
Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3pin Shuttered socket
20
-
-
... More
17.1.9.1
Supplying, installation, testing & commissioning sector panel suitable for
following zones, complete with visual indications for short circuit fault, open circuit
fault, fire condition and all other standard facilities as per IS:2189 with mimic
diagram for all area/zone covered, complete with all connections, interconnections as
required.4 Zone
1
-
-
... More
OD45153/2024-2025
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement- 150 mm dia Bend
10
-
-
... More
18.48
Providing and placing on terrace (at all floor levels) polyethylene water storage tank
:ISI 12701 marked, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
10000
-
-
... More
OD85555/2024-2025
PRESSURE SWITCH- Supply, installation, testing and commissioning of pressure Switch.(Make: Danfoss/Indifss/Accuree)
1
-
-
... More
OD85586/2024-2025
SIGN BOARDS -Supply & erection of Glow Sign Board made of 3mm
thick PVC foam board for each floor 12" x 4" - FIRE DUCT
5
-
-
... More
OD45147/2024-2025
Water proof plastering with Cement Mortar 1:4 (1 cement : 4 fine sand) 12mm thick
plaster finished with a floating coat of neat cement mixed with water proofing compound 2K of approved make @ 2kg/m2 of mix floated hard and troweled smooth
including all labour, material, conveyance charges etc complete.
116.92
-
-
... More
50.18.9.19.2
Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m
spacing. This includes jointing of pipes with one step PVC solvent cement and testing
of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 -
External work - Exposed on wall
60
-
-
... More
2.34.1
Supplying chemical emulsion in sealed containers including delivery as
specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%
220
-
-
... More
50.13.1
9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of
materials, labour charges etc complete
2428.4
-
-
... More
1.56
Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings)
75
-
-
... More
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m
102.57
-
-
... More
OD45151/2024-2025
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110 mm dia Y
6
-
-
... More
5.9.2
Centering and shuttering including strutting, etc. and removal of form for:Walls (any
thickness) including attached pilasters, butteresses, plinth and string courses etc.
46.02
-
-
... More
90.16.1.4
Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)
40
-
-
... More
1.10.2
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group B
135
-
-
... More
90.5.1.3
Supply and fixing the following types of superior quality 250V A.C call bell on
existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Ding dong bell
10
-
-
... More
90.17.17.1
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.a.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585
b.20 mm nominal internal dia gun metal globe valve & nozzle.
c.Drum and brackets for fixing the equipmets on wall.
d.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 m
6
-
-
... More
2.26.1
Extra for every additional lift 1.5 m or part there of in excavation / banking excavated
or stacked materials.All kinds of soil
36
-
-
... More
1.10.1
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group A
265
-
-
... More
CIVIL WORKS
-
-
-
... More
1.17.1
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x
1.5 sq. mm
839
-
-
... More
11.46.2
Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by
manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622,
of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick
bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with
white cement & matching pigments etc. complete.Size of Tile 600x600 mm
118.7
-
-
... More
OD45155/2024-2025
Providing and fixing C.P. brass long body bib cock (Jaguar or equivalent )of
approved quality conforming to IS standards and weighing not less than 690 gms.
15 mm nominal bore
20
-
-
... More
4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4
coarse sand : 8 graded stone aggregate 40 nominal size)
2.72
-
-
... More
2.10.1
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
200
-
-
... More
50.18.9.22.3
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement-110 mm dia Door Elbow
8
-
-
... More
50.18.9.20.5
Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes
including jointing with PVC solvent cement - 63x63x63 mm dia Tee
6
-
-
... More
1.21.2
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.25 mm
475
-
-
... More
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.Thermo - Mechanically
Treated bars of grade Fe-500D or more
2400
-
-
... More
Fire Tank
-
-
-
... More
2.15.2
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
1
-
-
... More
OD45146/2024-2025
Valleying and ridging with Galvalume Trafford sheet 0.45 mm thick or equivalent
with fasteners such as 20mm thick screws and washers head and necessary overlap of
150mm at ends including cost and conveyance of all materials and Labour charges
etc. complete.
6
-
-
... More
OD45137/2024-2025
Engaging Man Labour-Plumber
6
-
-
... More
OD45149/2024-2025
Supplying and fixing 1.35 m dia, 5 cm thick, 30 cm depth pre cast cement concrete
ring including necessary earth work excavation, erection cost and conveyance of all
materials and labour charges etc., complete, ( MR for 1 ring )
18
-
-
... More
90.16.5.3
Supply of superior quality copper earth socket for the following size of earth
conductor including crimping etc. as required.3.15 mm (10 SWG)
13
-
-
... More
8.5
Extra for providing opening or required size & shape for wash basin/kitchen sink in
kitchen platform, vanity counter and similar location in marble/granite/ stone work,
including necessary holes for pillar taps etc. including moulding, rubbing and
polishing of cut edges etc. complete
10
-
-
... More
50.18.9.22.2
Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow
10
-
-
... More
13.7.2
12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1cement : 4 fine sand)
478.5
-
-
... More
OD45161/2024-2025
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS: 8931
15 mm nominal bore
20
-
-
... More
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,beams, plinth beams, girders bressumers and cantilevers
2013.77
-
-
... More
8.2.2.2
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and
prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias
and similar locations, of required size, approved shade, colour and texture laid over
20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with
white cement, mixed with matching pigment, epoxy touch ups, including rubbing,
curing, moulding and polishing to edges to give high gloss finish etc. complete at all
levels.Area of slab over 0.50 sqm
61.35
-
-
... More
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses
etc., including cutting, hoisting, fixing position and applying a priming coat of
approved steel primer, including welding and bolted with special shaped washers etc.
complete.Hot finished welded type tubes
224
-
-
... More
50.18.9.22.9
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -110 mm dia offset
6
-
-
... More
4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 nominal size)
58.52
-
-
... More
90.11.1.15
Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/
TP MCB as outgoing (IP 42/43)
1
-
-
... More
9.121
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of
30 mm thickness. The laminated shall be moulded with fire resistant grade
unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm
thick and shall be filled with suitable wooden block in all the three legs. The frame
shall be covered with fiber glass from all sides. M.S. stay shall be provided at the
bottom to steady the frame
116
-
-
... More
1.11
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface / recessed medium class PVC conduit, 2 way
modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
8
-
-
... More
1.41
Installation, testing and commissioning of pre - wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
250
-
-
... More
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil
295.68
-
-
... More
50.18.9.20.3
Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 63 mm dia Door Elbow
5
-
-
... More
50.18.9.14.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. this includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm
dia 6 Kgf/cm2 - External work - Exposed on wall
60
-
-
... More
5.9.6
Centering and shuttering including strutting, etc. and removal of form for:Columns,
Pillars, Piers, Abutments, Posts and Struts
27.89
-
-
... More
OD45135/2024-2025
Providing and fixing bright finished Stainless Steel Tower Bolts (barrel type) with
necessary screws etc. complete: 200x10 mm (9.74.2 modified )
60
-
-
... More
1.25
Supplying and fixing two module stepped type electronic fan regulator on the existing
modular plate switch box including connections but excluding modular plate etc. as
required.
50
-
-
... More
5.6
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including
accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
-
-
... More
OD45170/2024-2025
Supply and providing 20W LED Tube of approved make with lumens efficiency of 100 lumens /watt, THD<=20, CRI>80,Colour temperature of 3000K with inbuilt surge protection(2.5KV).
285
-
-
... More
22.23.1
Providing and applying integral crystalline slurry of hydrophilic in nature for
waterproofing treatment to the RCC structures like retaining walls of the basement,
water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels
/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts
integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts
integral crystalline slurry : 1 part water) for horizontal surfaces and applying the
same from negative (internal) side with the help of synthetic fiber brush. The material
shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing
permeability of concrete by more than 90% compared with control concrete as per
DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The
crystalline
slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work
shall be carried out all complete as per specification and the direction of the
engineerincharge. The product performance shall carry guarantee for 10 years against any
leakage.For vertical surface two coats @0.70 kg per sqm
23.1
-
-
... More
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
6219.38
-
-
... More
OD45134/2024-2025
Engaging Man labour -Coolie
15
-
-
... More
90.4.1
Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per
IS 732 as required.
50
-
-
... More
OD85588/2024-2025
FIRE EXTINGUISHER:- Supply and Installation of Co2 4.5 Kg Fire Extinguisher complete with initial charges and installation brackets
3
-
-
... More
OD45133/2024-2025
Supplying and Providing 2k water proofing compound coating 2 coats for Toilet,slab floor and Wall area of approved make @ 2kg/m2 of mix floated hard and troweled smooth including all labour, material, conveyance charges etc complete(modified)
269.4
-
-
... More
1.10.3
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group C
10
-
-
... More
OD45150/2024-2025
Constructing and providing RCC manhole 50 x 50 x 45 cm Inner dimension including
earth work with 15 cm work clearance PCC 1:5:10, 8 cm thick RCC 1:2:4 using 20
mm metal for 15 cm thick side walls and 15 cm thick base with 8.0 cm thick pre cast
cover provision for inlet and out let connection forming channels in cc 1:3:6 at
bottom using PCC 1:3:6 20 mm metal 8 cm thick ,plastering with flush coat inside
cutting groove for cover ,handling grip using 12 mm bar etc complete
2
-
-
... More
OD85553/2024-2025
PRESSURE GAUGE- Supply, installation, testing and commissioning of pressure gauge with 0 to 12kg range 4" dia.(Make: H Guru)
1
-
-
... More
OD45143/2024-2025
Engaging man labour -Tree Cutter
8
-
-
... More
17.10.2.1
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983
with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and
brackets, cutting and making good the walls wherever required:
Kitchen sink without drain board610x510 mm bowl depth 200 mm
10
-
-
... More
9.21.1
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)
non- decorative Type, core of block board construction with frame of 1st class hard
wood and well matched commercial 3 ply veneering with vertical grains or cross
bands and face veneers on both faces of shutters:35 mm thick including ISI marked
Stainless Steel butt hinges with necessary screws
59.4
-
-
... More
50.18.9.9.2
Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent
cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 110 mm dia 4 Kg/cm2
50
-
-
... More
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
1593.97
-
-
... More
13.48.1
Finishing with Deluxe Multi surface paint system for interiors and exteriors using
primer as per manufacturers specifications:Two or more coats applied on walls @
1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10
sqm
8772.82
-
-
... More
8.3.2
Providing edge moulding to 18 mm thick marble stone counters, vanities etc.,
including machine polishing to edge to give high gloss finish etc. complete as per
design approved by Engineer -in-Charge.Granite work
120
-
-
... More
OD85582/2024-2025
SIGN BOARDS -Supply & erection of Glow Sign Board made of 3mm
thick PVC foam board for each floor 12" x 4" - EXIT
4
-
-
... More
Water Supply and Sanitation
-
-
-
... More
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil
99
-
-
... More
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash
fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminnium snap beading for
glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash
fasteners to be paid for separately):
665.68
-
-
... More
Fire Fighting System
-
-
-
... More
OD45145/2024-2025
Providing and fixing powder coated Galvalume Trafford sheet 0.45 mm thick up to
any pitch and fixing with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I.
plain and bitumen washers or with self drilling fastener and EPDM washers etc.
complete (excluding the cost of purlins, rafters and trusses), including cutting sheets
to size and shape wherever required.
40.8
-
-
... More
OD85578/2024-2025
HOSE BOX- "Supply, installation, testing and commissioning of hose boxes wall/pedestal type of size 600 x 250 x 400 mm made out of 18 guge MS sheet steel with front side glass, locking arrangement and painted with approved colour completed as required and as per specifications.(Make:Friends)
6
-
-
... More
50.18.9.13.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm
dia 10 Kgf/cm2- External work - Exposed on wall
20
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Thiruvananthapuram, Kerala