Kerala Irrigation Infrastructure Development Corporation Limited Tender

Supply of 28mm neck size PET Preforms for 2000ml as per the following Technical Specifications : The Preforms should be made from Krauss Maffei or Husky machine only. Raw Material: Polyethylene Terepthalate resin with IV 0.80 +/- 0.02. Material (PET- Resin) should be as per BIS standards; 12252 : 1987 12229 : 1987 as suitable for packing mineral water / food stuff. Overall migration should be as per IS - 14543 : 2004. Weight: 34 gms ± 0.25 gms, deviation can be accepted. Neck: 28 mm, Three start / half twist thread. Color of preform : Clear. Length:128 mm ± 2 mm, deviation can be accepted. Foreign/Black Particles: Preforms should be free from Foreign or Black particles. Flashes are not acceptable. Fused Preforms: Preforms should not be stuck together. Crystallinity: Crystallinity in the end of the Preform shall not exceed more than 10 mm from the gate. Bubbles are not acceptable. Scratches: Scratches should not be visible to the naked eye. Acetaldehyde Content: 6 ppm. The product should be in line with the leading soft drink and mineral water manufacturers. Cost shall be inclusive of all conveyance and delivery at the factory at Malankara and shall be inclusive of all unloading charges at site.