Kerala Irrigation Infrastructure Development Corporation Limited Tender

od158848/2021_2022 : Painting with synthetic enamel paint of approved brand and manufacture of<br>required colour to an give even shade:<br>One or more coats on old work

od158849/2021_2022 : Providing and installing factory packed, two component structural grade polymer modified mortar of 12 to 15 mm thick after priming the base floor with liquid polymer additive 100 ml/sq.m. in once coat and the ready-made polymer should have the properties of initial set 3 hours and final set 5 hours , compressive strength > 45 MPA and flexural strength > 6 MPA after removing the loose materials, dust, cement latience from exsisting floor

od158850/2021_2022 : Providng and installing epoxy flooringby removing the de-bonded epoxy from the kotta-stone base floor, swipe off the wetness from the base flooring, mild grinding to be done for mechanical bonding to accept the epoxy-cement based self-smoothening flooring , applying two component epoxy based primer(Part A + Part B – 2.5 KG) in one two coats and leave for drying for 12 hours, installing the 3 component, Part A, B, C – 26.25 kg of materials, having properties of compressive strength 30 MPA, Flexural strength 4 MPA and shore hardness more than 70 by mixing mechanically, spread using flat trowels @ thickness of 2 mm, then spike rolling for obtaining a smooth finish and leave finished for self-cure for 24 to 48 hours and top coated the entire surface with 2 coats of water based, two component epoxy matt finished coating with all materials, labour and tools

od158851/2021_2022 : Providing and installing food grade epoxy flooring by mild grinding over the existing epoxy flooring, apply solvent free, two component epoxy primer having properties of mixed density 1.07 g/cc, bond strength > 1.5 MPA, VOC 7g/L @ 200 ml/sq.m. providing and Installing four component (Part A, B C & D – 18.5 kg), solvent free, food grade CFTRI approved; confirms to the specifications as per U.S FDA 175.300 epoxy flooring @ 1 mm having properties of mixed density 1.61 g/cc, compressive strength > 60 MPA, Bond strength > 1.5 MPA, Tensile strength > 20 MPA with all materials, tools and labour

od158950/2021_2022 : Painting with aluminium paint of approved brand and manufacture to give an<br>even shade:<br>One or more coats on old work

od168654/2021_2022 : Labour for cleaning

od206975/2021_2022 : Fixing display banner in cotton cloth material including printing matter and photograph <br>calculation for 2.4m x 0.75m

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes