Kerala Cooperative Milk Marketing Federation Limited Tender

11.46.1 Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 500x500 mm

14.72 Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done .

Tile work & other allied works at plant entrance area, processing hall passage area, staircase to laboratory and HMST floors.

15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

14.1.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

OD3714/2025-2026 Providing and laying heavy duty industrial type fully vitrified 20mm thick acid/alkali resistant industrial tile suitable for dairy flooring work. The tile shall be laid with 20mm thick mortar (1:4) bedding with 5 mm spacer joints. The joint shall be filled with approved brand acid/alkali resisting epoxy grout(Grouting the joints of flooring tiles having joints of 5 mm width upto 5mm depth, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in charge. APPROVED BRAND -JOHNSON ENDURA Size of Tile 300 x 300 mm - Flooring & Skirting

OD31814/2025-2026 Providing and fixing SS sheet cladding using SS sheet of grade AISI 304. The sheet shall be properly fixed to the SS partition/masonry wall upto specified height including cutting, bending, jointing, riveting/ welding, with SS fastners etc. complete as per the directions of Engineer in charge.

Chemical storage room refurbishingt Works

15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

OD3729/2025-2026 Providing and laying heavy duty industrial type fully vitrified 20mm thick acid/alkali resistant industrial tile suitable for dairy flooring work. The tile shall be laid with 20mm thick mortar (1:4) bedding with 5 mm spacer joints. The joint shall be filled with approved brand acid/alkali resisting epoxy grout(Grouting the joints of flooring tiles having joints of 5 mm width upto 5mm depth, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in charge. APPROVED BRAND -JOHNSON ENDURA Size of Tile 300 x 300 mm - Flooring & Skirting

50.6.2.2 Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

OD3733/2025-2026 Providing and fixing SS sheet cladding using SS sheet of grade AISI 304. The sheet shall be properly fixed to the SS partition/masonry wall upto specified height including cutting, bending, jointing, riveting/ welding, with SS fastners etc. complete as per the directions of Engineer in charge.

OD3735/2025-2026 Providing and fixing panelled side hung doors made of powder coated aluminium extruded architectural sections of 45mm wide frames for shutter having wall thickness of 1.8 ± 0.1 mm and appropriate outer frames with 6mm ACP panel at bottom and 6mm thick approved glass at top including handle, EPDM gasket, screws, fastners, pivots, hinges, lock & key, door stopper etc. as per the drawing nd specifications.

Flooring and cladding work near chemical storage room

15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

OD3714/2025-2026 Providing and laying heavy duty industrial type fully vitrified 20mm thick acid/alkali resistant industrial tile suitable for dairy flooring work. The tile shall be laid with 20mm thick mortar (1:4) bedding with 5 mm spacer joints. The joint shall be filled with approved brand acid/alkali resisting epoxy grout(Grouting the joints of flooring tiles having joints of 5 mm width upto 5mm depth, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in charge. APPROVED BRAND -JOHNSON ENDURA Size of Tile 300 x 300 mm - Flooring & Skirting

14.1.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

OD31814/2025-2026 Providing and fixing SS sheet cladding using SS sheet of grade AISI 304. The sheet shall be properly fixed to the SS partition/masonry wall upto specified height including cutting, bending, jointing, riveting/ welding, with SS fastners etc. complete as per the directions of Engineer in charge.

Tile work of corridor connecting the dairy processing hall to refrigeration and boiler house.

14.1.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

OD3714/2025-2026 Providing and laying heavy duty industrial type fully vitrified 20mm thick acid/alkali resistant industrial tile suitable for dairy flooring work. The tile shall be laid with 20mm thick mortar (1:4) bedding with 5 mm spacer joints. The joint shall be filled with approved brand acid/alkali resisting epoxy grout(Grouting the joints of flooring tiles having joints of 5 mm width upto 5mm depth, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in charge. APPROVED BRAND -JOHNSON ENDURA Size of Tile 300 x 300 mm - Flooring & Skirting