Irrigation Department Tender

... More
The Irrigation Department has issued a formal invitation for competitive bids for General-annual Maintenance At Poovanthodu 2026-27-annual Maintenance Of Vented Dam Across Poovanthodu In Thalassery Municipality, Kannur District For The Year 2026-27-general Civil Work-1 in Kannur, Kerala, with an estimated contract value of Rs. 92,709. The bid opening date for this tender is 10-11-2026 and the last date for bid submission is 18-11-2026. Interested bidders for Irrigation Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Irrigation Department Tender - Kerala Tender

Opening Date10 Nov 2026
Closing Soon18 Nov 2026
Tender Amount₹ 92,709 
Notes
Download

Costs

  • EMD

    ₹ 2,318
  • Document Cost

    ₹ 555
  • Tender Fee

    ₹ 295

Description

General-annual Maintenance At Poovanthodu 2026-27-annual Maintenance Of Vented Dam Across Poovanthodu In Thalassery Municipality, Kannur District For The Year 2026-27-general Civil Work-1

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

227.345

-

-

... More
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

26.18

-

-

... More
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)

3.75

-

-

... More
60.7.1:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

0.2

-

-

... More
OD28443/2026-2027:Laterite Masonry- Laterite masonry using neatly dressed stones of size 35cmx20cmx20cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of conveyance and labour charges etc. complete.

0.203

-

-

... More
Appendix - B-Opening vents

-

-

-

... More
OD11057/2026-2027:Removing FRP shutter from the grooves of VCB vents by removing connection bolt and wedge and conveying to store after cleaning shutter stacking the same etc completeas directed by the departmental Officers at site.

14.4

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.