INKEL Limited Tender
... More
The INKEL has issued a formal invitation for competitive bids for the INKEL Limited project, for Muziris Heritage Project- Repair And Maintenance Of Paliam Oottupura, North Paravur, Ernakulam in Ernakulam, Kerala, with an estimated contract value of Rs. 1,01,32,697. The bid opening date for this tender is 03-04-2019 and the last date for bid submission is 26-04-2019. Interested bidders for INKEL Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
INKEL Limited - INKEL Tender
Opening Date3 Apr 2019
Closing Date26 Apr 2019
Tender Amount₹ 1,01,32,697
Costs
EMD
₹ 50,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_INKEL_275703_1Bid Award Id
ViewTender No
NIT/INKEL/MUZ/2018-19/055Tender Authority
INKEL Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and fixing ISI marked Brass hard drawn hooks and eyes 250 mm
12
-
191.92
... More
Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with PVC clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for internal work-exposed on walls as directed by the Engineer in charge - 160mm OD(6kg/cm2)
65
-
900
... More
Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with PVC clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for External work-exposed on walls as directed by the Engineer in charge - 50mm OD (6 kg/cm2)
12
-
450
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S.clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners,connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.
Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
100
-
275.46
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc.
200
-
193.41
... More
Dismantling wooden boardings in lining of walls and partitions,excluding supporting members but including stacking within 50 metres lead : Thickness above 25 mm up to 40 mm.
5
-
66.65
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete ::150x10 mm
40
-
332.73
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Second class teak wood
14
-
3503.73
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking,yard etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 6mm thick stone aggregate bedding and 800 micron ultraviolet resistant PVC Sheet on the entire area , compacting and proper embedding/laying of inter locking paver blocks through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer-in-Charge.60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern
200
-
1293.15
... More
Providing and laying MP hip and ridge tiles 1st class set in surki mortar (1: 1/2:1.5) including finishing edges, etc. complete as directed by Engineer-in-Charge.
21.21
-
117.27
... More
Extra for providing opening of required size & shape for wash basin / kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
5
-
736.07
... More
Providing and fixing floor trap of PVC,110 mm outer dia(multi trap) including CP cockroach free floor grating with cup etc including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer in charge at all levels
13
-
600
... More
Providing and fixing ready made hume pipe septic tank of approved make for 50 users including necessary earth work excavation,making inlet and outlet connection with 100mm Pvc pipe refilling,testing of tank and joints.Tank will be having 2 inspection chambers on flat surface at top with necessary RCC covering complete job as per the direction of the Engineer in Charge
1
-
50000
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
1
-
2501.83
... More
Supplying and fixing FRP doors made of glass fibre conforming to IS:11551-1986, glass fibre rovings conforming to IS:11390-1985,isophthalic resin conforming to IS: 6746-1972, curing agents,accelerators, fillers, additives, fire retardants and pigments as specified. The frames shall be contact moulded by laying gelcoat at 500gm/m2 and laid over with two layers of FRP mat (one layer of 300 CSM mat and one layer of 450 CSM mat). The CSM mat shall be bonded with isophthalic resin and fillers of additives by weight. The edges shall be sealed with gelcoat and FRP mat to obtain smooth finish. The frames shall have an overall size of 100x63mm including the thickness of FRP and shall be filled with seasoned treated rubber wood on the inside. Suitable depressions shall be made in the door frames for receiving the fixtures such as hinges, mortice lock as well as 30mm door shutter. (one number mortice lock at the centre and three numbers of 100mm heavy duty stainless hinges). The rate shall include providing and fixing frames of approved colour for, providing and fixing 6 Nos. of flat iron hold fast of size 300mmx30mmx3mm using stainless steel screws, fixing in PCC 1:2:4 blocks, finishing the joints to match the surroundings and finishing the frames by buffing and polishing with wax as directed. (The contractor shall supply 1 No. of frames free of cost for every 10 Nos. of frames supplied at site or part thereof for destructive testing) The shutter shall be contact moulded by laying gelcoat at 500gm/m2 and laid over with two layers of FRP mat (one layer of 300 CSM mat and another layer of 450 CSM mat) for each of the web (panels) and two layers of FRP mat (one layer of 300 CSM mat and another layer of 450 CSM mat) for the flange portion (rails and styles). The CSM mat shall be bonded with isophthalic resin in the ratio of not less than 1:2 (one part of mat : 2 part of isopthalic resin and fillers and additives) by weight. The edges shall be sealed with gelcoat and FRP mat to obtain smooth finish. The shutter/frames shall have an overall thickness of 30mm with a width of 100mm for outer frames and 80mm for resin frames (as per drawings enclosed). The shutter frames shall be provided with treated and seasoned rubber-wood on the insides to receive the tower bolts, handle, mortise lock, hinges, door closers, etc. at specified locations. Suitable depressions shall be made in the shutter frames for receiving the hinges and concealed mortise locks. The rates shall include providing and fixing shutter ofapproved colour in the frames already provided and fixed, including fittings such as stainless steel hinges hinges, 2 numbers 150x10 mm stainless steel tower bolts, handles, door closers, mortice locks, etc. The shutter shall be buffed and polished with wax as directed. The thickness of FRP laminate of hollow rails and styles shall be minimum 2mm and thickness of FRP laminate used for panel in shutter shall be minimum 3mm.(Mode of measurement: Length shall be taken as back to back of outer frame and the height shall be taken from the Sill to the top of the outer frame)
12
-
5906.23
... More
Providing and fixing Cast Iron hand rail/ gate of required size with 50mm dia post at 1.2m interval and top rail 50x50mm square tube and bottom 50x6mm flat.The gap between top and bottom flat filled with Ornamental Cast iron grill of required pattern including fixing balusters to the concrete floor with necessary core cutting of tiles,drilling holes and welding with reinforcementof slab and beam.Painting with one or more coat of epoxy paint including priming coat.
290
-
332.07
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
30
-
1714.93
... More
Providing and fixing 150x10 mm passivated bolt with 50mm x 4mm passivated rod welded to bolt head for holdfast including fixing to frame embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
48
-
100
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCBO/ Isolator). 6 way (8 + 18), Double door
1
-
2659
... More
Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with PVC clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for External work-exposed on walls as directed by the Engineer in charge - 160mm OD(6kg/cm2)
15
-
800
... More
Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with PVC clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for External work-exposed on walls as directed by the Engineer in charge - 110mm OD(6 kg/cm2)
50
-
550
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. - 12 Module (200mm x 150mm)
5
-
344
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
110
-
207.35
... More
SH: - 4.00 ROOFING WORK
-
-
-
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length, 15 mm nominal bore
2
-
116.62
... More
Hire and errection charges of MS Jack upto 3m height including loading , transportation and unloading at site for 30 days and then returing after completion of work
10
-
5
... More
Providing and fixing stainless steel holding arrangements for wooden partition with 25mm x 6mm thick flat with necessary nobes and provision for holding with complete job as per the direction of engineer in charge.
6
-
150
... More
Supply of 1 No. centrifugal pump for pumping domestic water from collection sump to the OH tank ,KIRLOSKAR make, 0.75HP , 32mm outlet, horizontal, water filled type, openwell, single phase.
1
-
10000
... More
Providing and fixing second class teak wook eve boards of size upto 200mm x 20 mm at the edges of roof rafters with necessary screws as per the existing design including charges for scaffolding as directed by engineer in charge.
150
-
1500
... More
Providing and fixing approved quality PVC half turn valve(heavy duty) with necessary PVC fitting and PVC Clamp including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer- in-Charge at all levels - 25 mm dia nominal bore
3
-
300
... More
Providing and fixing 25mm dia MS plain rod,of required length ,thread & Bolts at both end for connecting wall purlins with 25mm dia check nut with washer from inner side and 25mm dia stopper nut with washer from outside including drilling holes in wall plates wherever required - Musical floor
175
-
73.32
... More
Providing and fixing second class teak Solid wooden door and window shutter having 35 mm thick with necessary wooden pivot / oxidised iron butt hinges with necessary screws planks jointed with 25 X 80 mm teak wood reepers with necessary iron screws complete job as per the direction of Engineer in Charge.
26
-
11788.68
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge
135
-
3667.47
... More
Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as Tees, elbows,bends,flanges, reducers, end caps,saddles, plugs,coupling, PVC Clamp etc. as per IS 7834 or IS 10124as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing charges,rectifying any leakage or defects, cutting and making good the walls etc. complete.as directed by Engineer-in-Charge for concealed lines for water supply. - 32 mm OD (10 kg/cm2 )
25
-
246.22
... More
Providing and fixing staircase and balcony hand rail /carved grills using teak wood planks of specified size including cost and conveyance of all materials ,labour charges etc complete as directed by Engineer in charge and as per the drawing
0.15
-
178444.06
... More
Constructing brick masonry open surface drain with solid cement concrete block in cement mortar 1:4 (1 cement : 4 fine sand) including earth excavation, 10 cm thick bed concrete 1:4:8 (1 cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size) and 25 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) for filling haunches including 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) with a floating coat of neat cement inside the drain, its top and exposed side including disposal of surplus earth complete as per standard design: 25 cm drain 30 cm average depth
120
-
1351.7
... More
Applying sealer compound one or more coat ( MRF,sheenlac etc.) after filling cracks and undulations in wood work with suitable wooden fillets then cleaning and smoothing the surface with special chisel/tools then sandering with suitable sandering paper so as to get a uniform smooth surface for applying sealer compound in roof members like rafter,wallplates,reeper etc upto 10m height including cost of scaffolding etc complete job as per the direction of Engineer in charge
2000
-
200
... More
Supplying and laying good quality red earth from approved source, spreading & compacting to fill up and level including watering and thorough consolidation to the standards and instruction of the engineer in charge.The rate Includes cost of materials conveyance, stacking charge, spreading, watering and consoldation as per the direction of Engineeer in charge
14
-
750
... More
Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 4 mm
4
-
1466.47
... More
Providing and fixing ISI marked Brass sliding door bolts with nuts and screws etc. complete.300x16 mm
4
-
1195.05
... More
Providing and fixing GM footvalve, flanged type, CI construction including all necessary fittings as per the direction of Engineer-in-charge. 32mm
1
-
1750
... More
Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres :Of sectional area 40 square centimetres and above Of sectional area below 40 square centimetres,for 12m height .
450
-
2.49
... More
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on floors jointed with white cement mortar 1:4 (1 white cement : 4 coarse sand) mixed with pigment to match the shade of tile , laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including machine rubbing and floor polishing complete as per the direction of engineer in charge.
500
-
780
... More
Applying white or colour wash by mixing glue & indigo as per requirement three or more coats to surfaces such as walls,columns, ceiling etc, after scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete including cost and conveyance of all materials, labour, scaffolding etc. complete as directed by Engineer-in-charge. Preparation of lime may be as per specification attached and test certificate of lime may be produced by the agency
1500
-
17.63
... More
Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as Tees, elbows,bends,flanges, reducers, end caps,saddles, plugs,coupling, PVC Clamp etc. as per IS 7834 or IS 10124as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing charges,rectifying any leakage or defects, cutting and making good the walls etc. complete.as directed by Engineer-in-Charge for concealed lines for water supply. - 25 mm OD (10 kg/cm2 )
30
-
228.19
... More
Providing and fixing CP brass health faucets with 8mm dia 1.5 meter long flexible tube and wall hook with all fittings and fixtures complete inlcuding cutting and making good the walls and floors wherever required including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer in charge at all levels.
(The purchase price considered including all accessories is Rs 1400/-any deviation plus or minus in the purchase price will be adjusted in the price quoted).
4
-
800
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below
19
-
271.5
... More
Supplying and lowering precast RCC soakpit ring 60cm diameter, 5cm-6cm wall thickness including top cover slab with necessary weep holes including filling 20mm stone aggregate ,30 cm alround the soakpit well outside alround the wall including excavation, backfilling and making connections with septic tank etc.complete as per the direction of Engineer in charge (Cost of the PVC pipe will be paid separately)
6
-
2500
... More
Providing and fixing frameless mirror, with all four edges machine polished and back side protected with safety film and 4 mm thick white fibre board backing and fixed on walls with mirror screws. The rate includes lifting, cutting etc. as per design and drawing.
3
-
3716.8
... More
Removing the pipes and connections in toilet/washbasin /Kitchen area,removing the debris and closing the holes.
2
-
200
... More
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: R.S. Joists.
470
-
2.41
... More
Thoroughly scrubbing, scrapping and cleaning the thickly white washed surface in several layers over the lime plastering using proper tools and different grade sand papers without making any damages in the wall surface and rectifying the petty damages wherever seen using proper materials to match the existing surface.
1200
-
100
... More
SH: - 5.00- FLOORING WORKS
-
-
-
... More
Providing and fixing teak wooden decorative type saksha"(sliding Wooden reeper locking arrangements) with two vertical members 60 mm X 60mm0 X 500 mm long with two numbers of horizontals 25 mm X 80 mm sliders fixed to the doors with necessary oxidized MS coach screws 6 nos and filling the counter sunk head portion with necessary wooden fillers fixed with glue complete job as per the direction of Engineer in charge
7
-
3000
... More
Masonry with solid concrete blocks, blocks of size 30x10x20cm, grade D of block density not less than 1800 kg/cum and average compressive strength of 4 N/mm2 and minimum strength of individual blocks 3.2 N/mm2 (as specified in IS 2185 part I 1979 Grade D) blocks constructed with cement mortar 1:5 for 10cm thick walls including providing reinforcement with 2 numbers of 6 mm dia torsteel bars every third layer (Cost of reinforcement will be paid wide item number 4.13), cost and conveyance of all materials to site, labour charges, hire and labour for scaffolding, curing etc complete;
15
-
738
... More
Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as Tees, elbows,bends,flanges, reducers, end caps,saddles, plugs,coupling, PVC Clamp etc. as per IS 7834 or IS 10124as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing charges,rectifying any leakage or defects, cutting and making good the walls etc. complete.as directed by Engineer-in-Charge for concealed lines for water supply. - 20 mm OD (10 kg/cm2 )
25
-
218.17
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. - 6 Module (200mm x 75mm)
5
-
258
... More
Labour charge for Roofing with departmentaly supplied MP roofing tiles including extra labour with raised up mughappu, false ceiling, obstructions, additional works in valleying areas etc. including necessary scaffolding complete as per the instruction of engineer in charge
640
-
254.02
... More
Random rubble masonry with hard stone in foundation and plinth includinglevelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)
23
-
6821.26
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size.
30
-
9428.95
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
50
-
88.24
... More
Providing and fixing CP Brass cup of size upto 75mm dia for all brass fittings over glazed tile as directed by Engineer-in-Charge at all levels.
50
-
50
... More
Extra for carving wooden grills/ louvers ,shades in second class teak wood as per existing design and size for the windows in all floors,wood work will be paid separately.
3
-
3500
... More
Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with PVC clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for internal work-exposed on walls as directed by the Engineer in charge - 75mm OD (6 kg/cm2)
10
-
304.19
... More
Filling the gaps of existing floor planks of any thickness upto 6m height,cleaning and removing all dust from joints with special tools,brushing and levelling uneven surface,then filling and levelling the joints with saw dust mixed with glue(fevicol or equivalent) and finally a dowel to combine the mixture as you gradually add more and more glue, making sure that you thoroughly combine the two components. Continue in this manner until a putty-like substance, that can be manipulated with clean fingers, is formed as per the specification attached.
25
-
150
... More
Providing anti-termite treatment to the useable members of wooden doors, windows and reapers, beams and rafters of roof ceiling etc. with two coat Biflex TC chemical diluted with kerosene or Turpentine after properly cleaning the wooden members etc complete conforming to manufacturer's specifications and as directed by the Engineer-in-charge
2000
-
260
... More
Providing and fixing CP brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer in charge at all levels
20
-
1021.53
... More
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
10
-
303.41
... More
Supplying following manpower for repairing damaged wooden windows, ventilators, doors, staicases etc. Man Mazdoor
8
-
734.23
... More
Dismantling W.C. of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge
8
-
95.37
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work
50
-
210.7
... More
Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer- in-charge.
0.5
-
599.08
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).
2
-
10690.4
... More
Providing and applying sealer compound after prepairing the surface / cracks with suitable wooden fillets after cleaning and smoothing the surface and the grovees with special chisel /tools applying one or more coat of wooden filler diluted in special thinner.Entire surface will be sand papering smooth manually with out disturbing the wooden carving details.Then apply second coat of wooden filler and sand papering smoothly .Entire surface will be applied with two or more coats of sealer compounds (MRF, sheenlac )
530
-
403
... More
SH: - 8.00 STEEL WORKS
-
-
-
... More
Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres :Of sectional area 40 square centimetres and above-12m height .
2
-
637.6
... More
Supplying and fixing up to 40 mm thick teak wood planks for ceiling/flooring over the joists and secondary already fixed using 60 mm GI screws and removing the decayed ceiling planks etc. complete.First floor
2.25
-
207928.01
... More
Strengthening the existing wooden beams,columns etc by inserting steel plates, angles flats etc. as per drawing, including cost and conveyance of steel plates, nuts, bolts, screw, fabricating, fixing complete as directed by Engineer-in-charge.
500
-
102.5
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
95
-
1281.06
... More
Making joints with available wood work like rafter, beams,wall plate of cross sectional area upto 100 sq. centimetres including cutting and making Half-lap joints upto 45 cm lapping including drilling 10mm dia holes for receiving bolts for reusing old timber work.complete job as per the direction of Engineer in charge.
30
-
200
... More
Providing and fixing bright finished brass handles with screws etc. complete. as directed by Engineer -in-Charge at all levels 100 mm
10
-
273.82
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood - 35 mm thick shutter
32
-
4382.8
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade -Area of slab over 0.50 sqm
55
-
5354.88
... More
Providing and fixing brass Reducer elbow 25 mm - 20 mm dia for receiving CP brass fittings like bip cock,stop cock,angle cock etc.,
30
-
200
... More
Providing and fixing well seasoned second class teak wood roof members in places of damaged one and already removed from position such as door and window frames, rafters, ridge, wall plate,collar, collar pin, flooring joists etc including all labour for ornamental cutting, steps, moulding etc. wherever necessary as per the existing size and shape including all scaffolding charges.Wooden members has to undergo seasoning and season certificate may be produced as per specification attached
10.11
-
159518.05
... More
SH: - 3.00- MASONRY WORK
-
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :Suspended floors, roofs, landings, balconies and access platform .
25
-
726.36
... More
Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with PVC clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for internal work-exposed on walls as directed by the Engineer in charge - 50mm OD(6kg/cm2)
10
-
250
... More
Providing and fixing second quality teak wood reepers of required size after cutting, shaping,making Columb/special lap joint and providing the same in position including cost of all materials as directed by Engineer in charge
0.93
-
159518.05
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
20 mm nominal bore.
2
-
562.53
... More
Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
800
-
148.35
... More
12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand)
150
-
368.42
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70kg as per standard design:100x100 mm size P type - With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
-
2756.13
... More
Fixing available second class teak wood reepers using departmental reepers after cutting, sizing making columb/special lap joint and providing the same in position with new nails including all cost of fixing etc as directed by Engineer in charge.
2.78
-
20089.53
... More
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level.Thermomechanically treated bars of Fe-500 D or more
300
-
97.35
... More
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 125x70x4 mm (ordinary type):
198
-
235.98
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :250x10 mm
48
-
538.7
... More
Cleaning MP tiles, hip and ridge tiles by removing water weeds, fungi etc using wire brush and lime water including extra lowering charge and scaffolding charges (considered only resuable tile)
640
-
137
... More
Filling the major cracks by providing and applying approved products like Asian Paints-Smartcare Hybrid PU Sealant in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable method including cutting of nipples after curing etc. complete as per directions of Engineer in- Charge.
30
-
200
... More
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 100x70x4 mm (ordinary type)
10
-
188.94
... More
Providing and laying approved make, MP tiles of 320 mm or nearest size over reeper bands (already done) to correct lines and levels including the cost, conveyance of all materials etc. including extra lowering charge and scaffolding charges complete as directed by Engineer-in-charge.
160
-
409.36
... More
Removing the paint from old timber surfaces using chemical paint remover like methylene chloride etc (not with sodium hyroxide) method and cleaning surfaces with sand paper, cotton waste, etc. including cost and conveyance of all materials ,labour charges,scaffolding etc as per the specifications attached
200
-
13.84
... More
Providing and fixing approved quality PVC half turn valve(heavy duty) with necessary PVC fitting and PVC Clamp including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer- in-Charge at all levels - 32 mm dia nominal bore
2
-
400
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
-
14850.65
... More
Providing and fixing bird mesh of size 20mmx20mm GI wire of 0.8-1mm dia fixed to 20mmx20mm GI Hollow tube on all sides.The mesh shall be fixed to square tube frame with 20mmx3mm MS flat welded over frame work on all sides.The entire work will be painted with synthetic enamel paint to match the existing pattern. (frame work ,painting will be paid separately)
40
-
300
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2000
-
12.47
... More
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface/ recess including painting in case of surface conduit , or cutting the wall and making good the same in case of recessed conduit, painting etc as required. 25 mm
400
-
69
... More
Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with PVC clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for External work-exposed on walls as directed by the Engineer in charge - 63mm OD (6 kg/cm2)
15
-
475
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete
40
-
1183.96
... More
SH: - 9.00 - WATER SUPPLY
-
-
-
... More
Providing and fixing PVC vent cowl to pipe already fixed as directed by Engineer-in-Charge at all levels. 110 mm dia
5
-
350
... More
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface/ recess including painting in case of surface conduit , or cutting the wall and making good the same in case of recessed conduit, painting etc as required. 20 mm
1500
-
57
... More
Documenting the structure by means of photography and CD before execution, during execution and after execution of individual work.
1
-
15000
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
35
-
216.29
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : sqm - Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
65
-
4967.1
... More
Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead of: GS Sheet.
59
-
120.57
... More
Laterite masonry in lime mortar 1:2:9(1cement:2 lime:9 fine sand ) using existing size or nearest available size of laterite for superstructure.including cost and conveyance of all materials, labour,scaffolding, curing, lead lift , etc complete at all levels and as directed by Engineer-in-charge.Preparation of lime may be as per specification attached
2
-
7526.52
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests .
(The purchase price considered for w.c. pan is Rs.1050, Flushing Cistern is Rs.665,vent heel is Rs.235 and any deviation plus or minus in the purchase price will be adjusted in the price quoted)
1
-
6010.02
... More
Dismatling and removing any thickness of walls in laterite or bricks in lime or cement mortar including disposal of debris within a distance of 50 m etc. complete.
50
-
1253.36
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without cost of MCB/RCBO/Isolator). only 8 way Double door
1
-
1061
... More
Providing and fixing wall hung wash basin of 540x480 mm size with C.I. brackets/basin bolt, 15 mm C.P. brass pillar cock, 32 mm C.P. brass waste of standard pattern,32mm dia CP brass bottle trap15 mm dia CP brass angle valve, including painting of fittings and brackets, cutting and making good the walls wherever required: (Shade & make as approved by architect) including cost and conveyance of all materials, labour charges, sundries etc. complete as directed by the Engineer in charge (The purchase price considered for wash basin is Rs. 1712, pillar cock is Rs. 1100, bottle trap is Rs. 1050, angle valve is Rs.550 and any deviation plus or minus in the purchase price will be adjusted int eh price quoted.)
1
-
6200.75
... More
Supplying, laying, and jointing schedule 40 PVC pipe of ISI approved brand such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like special solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure, rectifying any leakage or defects etc. complete.as directed by Engineer-in-Charge for water supply.FOR external Work including PVC Clamp. - 25 mm dia ID
45
-
124.22
... More
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: All kinds of soil
1350
-
91.16
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. - 1 or 2 Module (75mm x 75mm)
15
-
175
... More
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.
170
-
51
... More
Extra for providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of single block masonry at all levels including cost and conveyance of MS bars etc complete as directed by Engineer-in-Charge
15
-
97.78
... More
SH:-10.00 MISCELLANEOUS WORKS
-
-
-
... More
Making joints with available wood work like rafter, beams,wall plate of cross sectional area beyond 100 sq. centimetres upto 600 sq.centimetres including cutting and making Half-lap joints upto 60 cm lapping including drilling 10mm dia holes for receiving bolts for reusing old timber work.complete job as per the direction of Engineer in charge.
8
-
500
... More
Dismantling carefully Electric supply lines and pipe fittings including stacking serviceable materials within 50 metre lead as directed by Engineer in charge
750
-
18
... More
Masonry with solid concrete blocks above plinth, blocks of size 30x15x20cm, grade D of block density not less than 1800 kg/cum and average compressive strength of 4 N/mm2 and minimum strength of individual blocks 3.2 N/mm2 (as specified in IS 2185 part I 1979 Grade D) blocks constructed with cement mortar 1:6 for 20cm thick walls including cost and conveyance of all materials to site, labour charges, hire and labour for scaffolding, curing etc complete. Upto floor V level
5
-
5812.37
... More
Providing and fixing CP brass Soap tray as directed by Engineer-in-Charge at all levels. (The purchase price considered including all accessories is Rs.610/- and any deviation plus or minus in the purchase price will be adjusted in the price quoted)
6
-
450
... More
SH :- 6.00 - FINISHING WORKS
-
-
-
... More
Supplying and fixing European type floor mounted white glazed WC with trap including seat cover, with CP brass hinges and rubber buffers, 10 litres capacity PVC low level white flushing cistern with fittings and brackets, 40mm dia PVC flush bend over flow pipe with mosquito proof arrangements , with all necessary fittings complete including cutting and making good the walls and floors etc. complete as directed by the Engineer- in -Charge. (The purchase price considered for EWC is Rs. 920, seat cover is Rs. 427, cistern is Rs. 1027, fittings is Rs. 762 and any deviation plus or minus in the purchse price will be adjusted in the price quoted.)
4
-
13500
... More
SH :- 7.00 - FINISHING WORKS
-
-
-
... More
Removing the paint from old timber surfaces using flame method and cleaning surfaces with sand paper, cotton waste, etc. as per the specification attached
25
-
25
... More
Fixing available well seasoned second class teak wood roof members in places of damaged one and already removed from position such as door and window frames, rafters, ridge, wall plate, collar, collar pin, flooring joists etc including all labour for ornamental cutting, steps, moulding etc. wherever necessary as per the existing size and shape using already dismantled departmental roof members including all scaffolding charges.
5.63
-
20089.53
... More
Providing and fixing CP Towel rail of approved make including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer in charge at all levels.
5
-
979.14
... More
Dismantling and removing the wrought and framed work of timbers in roof,brackets doors,windows and floors including removing cleats and wooden nails end of balustrades including lowering, stacking the useful materials and disposal of debris etc including extra lowering charge and scaffolding charges complete within a distance of 50m.
12.54
-
3306.61
... More
SH: - 2.00 - WOOD WORK
-
-
-
... More
Providing and fixing coloured vitreous china counter bottom round wash basin 470 mm or nearest size of approved make including one CP brass pillar cock 15 mm NB including connecting pipes with all fittings 32 mm dia rubber plugs 32 mm dia CP brass waste coupling, 32 mm dia CP brass bottle trap, 15mm angle valve,waste pipe etc. complete as directed by the Engineer-in-charge. (The purchase price considered for washbasin is Rs.1580, pillar cock is Rs.1100,bottle trap is Rs 1050,angle valve is Rs 550 and any deviation plus or minus in the purchase price will be adjusted in the price quoted).
5
-
6331.7
... More
Providing and fixing bright finished brass handles with screws etc. complete: 125 mm
28
-
294.46
... More
Plastering with lime mortar 1:2:9,(1cement:2 lime:9 fine sand )12mm thick using lime mortar and adequate quantity of herbals such as Jaggery, kadukka water and etc for old surface for traditional works including cost and conveyance of all materials, labour,scaffolding, curing, lead lift , etc complete at all levels and as directed by Engineer-in-charge. .Preparation of lime may be as per specification attached
125
-
260
... More
Supplying, laying, and jointing schedule 40 PVC pipe of ISI approved brand such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like special solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure, rectifying any leakage or defects etc. complete.as directed by Engineer-in-Charge for water supply.FOR external Work including PVC Clamp. - 32 mm dia ID
130
-
163.56
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work
25
-
422.6
... More
Providing and fixing cera make 2506 grab bar for either side of EWC in physically hadicapped toilet including cost and conveyance of all material,labour etc complete
2
-
9500
... More
Providing and fixing cera make 2505 grab bar for either side of washbasin n physically handicapped toilet including cost and conveyance of all material,labour etc complete
2
-
2500
... More
Providing and fixing PVC vent cowl to pipe already fixed as directed by Engineer-in-Charge at all levels.
75 mm dia
2
-
200
... More
Supplying following manpower for repairing damaged wooden windows, ventilators, doors, staicases etc.
Carpenter & mason
8
-
971.66
... More
Providing valley by using 20 gauge plain Aluminium sheet or equivalent quality with necessary overlaps at ends,with necessary steel nails ,eve plate etc including necessary scaffolding complete as per the instruction of engineer in charge
10
-
2000
... More
Supplying and fixing approved quality white vitreous china urinal division plate 700 x 340 including cost and conveyance of all material, labour charge, lead, lift, all taxes etc. complete as directed by the Engineer-in-Charge. (The purchase price considered for divisin plate is Rs.1110, and any deviation plus or minus in the purchase price will be adjusted in the price quoted.
2
-
1650
... More
SH:-11.00 ELECTRICAL ITEMS
-
-
-
... More
Supply, installation and fixing of 16/20/25 amps.outer box of 240 volts, DP MCB , in sheet steel enclosure, on surface or in recess and complete with interconnections as required. (For AC point & socket)
2
-
627
... More
Providing and fixing 50mm dia stainless steel roller for sliding arrangements in racks/cupboard and cabinets
4
-
50
... More
Labour charge for Laying available departmental MP hip and ridge tiles set in lime mortar 1:11/2 including finishing edges using red oxide powder etc. including necessary scaffolding complete as per the instruction of engineer in charge. (Over First Floor Roof)
80
-
62.9
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
70
-
286.21
... More
Thoroughly scrubbing, scrapping and cleaning the thickly white washed surface in several layers over the wood work using proper tools and different grade sand papers without making any damages in the wood surface and rectifying the petty damages wherever seen using proper materials to match the existing surface.
800
-
100
... More
Supplying and providing Laterite masonry in Cement mortar 1:6(1cement:6 coarse sand ) using existing size or nearest available size of laterite for uperstructure.including cost and conveyance of all materials, labour,scaffolding, curing, lead lift , etc complete at all levels and as directed by Engineer-in charge. Preparation of lime may be as per specification attached
30
-
7918.17
... More
Providing and fixing white vitreous china flat back large urinal of 590x390x375 or nearest size of approved make with fittings, standard size CP brass flush pipe, spreaders with unions and clamps (all in CP brass) with waste fitting as per IS:2556, CI trap with outlet grating and other couplings in CP brass including paintings of fittings and brackets, waste pipe, cutting and making good the walls and floors whereveer required.Single half stall urinals.
(The purchase price considered for urinal is Rs.2390 and any deviation plus or minus in the purchase price will be adjusted in the price quoted).
3
-
6839
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. - 3 Module (100mm x 75mm)
40
-
185
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Udalguri, Assam