Infopark Tender

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2km, network communication card, minimum 320 character graphics/LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM),powder supply unit (230 +/- % V,50hz), 48 hrs back -up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility ti connect printer to printout log and facility ti have seamless integration with analog/digital vice evacuation system (which is part of the schedule integration with analog/digital voice evacuation system (which is part of the schedule of work under SH:PA System) and shall be complete with all accessories. The panel shall be complete with all accessories. The panel shall be compatible fir IBMS system with open protocol Bacnet/ Modbus over IP complete as per specifications. one Loop Panel Location : Substation and MLCP Note : Shop drawing to be prepared and same was approved by Infopark before commencement of work. After completion of work, as fitted drawing to be prepared and submitted to Infopark

Checking the healthiness / continuity of existing cable from the exisiting fire alarm panel / device to device at substation, MLCP, SDB - 1st floor to terrace floor Note ; Maximum existing cable will be use, only change the dedector

Supply,Installation,Testing & commissioning of fault isolator complete with base as required

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. (Outer colour of cable will be in Red)

Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2km, network communication card, minimum 320 character graphics/LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM),powder supply unit (230 +/- % V,50hz), 48 hrs back -up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility ti connect printer to printout log and facility ti have seamless integration with analog/digital vice evacuation system (which is part of the schedule integration with analog/digital voice evacuation system (which is part of the schedule of work under SH:PA System) and shall be complete with all accessories. The panel shall be complete with all accessories. The panel shall be compatible fir IBMS system with open protocol Bacnet/ Modbus over IP complete as per specifications. Two Loop Panel Location : Cafeteria & SDB Note : Shop drawing to be prepared and same was approved by Infopark before commencement of work. After completion of work, as fitted drawing to be prepared and submitted to Infopark

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.