HLL Lifecare Limited Tender

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade - III ( size range 26.5 mm to 0.075 mm) having CBR Value - 20

Providing and laying C.C pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge ( The panel shuttering work shall be paid for separately)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Forming groove of uniform size from 12x12 mm and upto 25 x 15 mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer -in-Charge.

Providing and fixing in position pre- moulded joint filler in expansion joints.

Providing and applying 5 layer of all-weather ITF approved Acrylic Synthetic coating at Basketball court prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, Painting track marking as per standards with adequate no of coats to give uniform finish all complete. On concrete work

Providing and fixing Premium in-ground Adjustable basketball hoops unit Installed directly into the ground & secured by concrete and can support a maximum user weight of 120 kg for dunking. Backboard is designed to Ballistic Glass TM strength specifications and includes foam pole padding as standard. Option to include backboard padding & Reduces chance of player injury. The pole made up of 10cm x 10cm galvanised square steel post with durable black powder coating, 6mm thick tempered glass backboard, 16mm diameter rim wire, Heavy-duty nylon net with anti-whip properties, 3.2cm thick pole foam padding to be provided to protects the basketball post all complete as per the safety standards of BS EN 1270:2005. Backboard dimensions: 140cm x 90cm, Hoop height is easily adjusted between 2.3m and 3m, Regulation size flex rim diameter: 48cm, Overhang of 76-1.2cm, Hoop bolt pattern minimum 13cmx10cm.