Cochin International Airport Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 3,00,000Document Cost
₹ 2,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_CIAL_592238_1Bid Award Id
ViewTender No
CIAL/CIVIL/603A/E14Tender Authority
Cochin International Airport Limited ViewPurchaser Address
-Website
http://https://cial.aero/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
SH : RCC WORK
-
-
-
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M-25 grade conforming to IS 456 or IS 10262 for reinforced cement concrete structural elements for lintel etc using coarse sand conforming to IS 383 and 20mm nominal size graded hard granite broken stones, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (asper IS 9103) to accelerate,retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-Charge. Minimum cement content is 400Kg/m3.
Concrete of M25 grade with minimum cement content of 400 kg /cum
9
-
-
Providing ,hoisting and fixing precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, slabs,brackets etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand conforming to IS383), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surfaces complete as per direction of Engineer-in-charge.but excluding the cost of reinforcement with design mix cement concrete of M-25 grade conforming to IS 456 or IS 10262.Minimum cement content considered in this item is @ 400 kg/cum
5
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
1215
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
87
-
-
SH :MASONRY WORK
-
-
-
Providing and constructing Solid concrete block masonry M-10 grade (mix1:3:6) (1 cement: 3 crusher sand :6 aggregates 6mm ) in C.M1:6(1cement, 6 crusher sand) with Solid blocks of 30x20x20 cm size and approved quality including scaffolding, raking out of joints, curing, cost and conveyance of all materials, labour, lead, lift, etc. complete for all types of masonry works in super structure above the highest plinth level as directed by Engineer-in-charge at all levels
107
-
-
Providing and constructing 100 mm solid block masonry in CM 1:4 (1 cement, 4 crushersand) in partition walls, parapets, etc. with blocks of standard sizes and of approved quality (average compressive strength not less than 10N/mm2) including scaffolding, raking out of joints, curing, cost and conveyance of all materials, lead,lift, etc.complete including providing 2 Nos. of 6mm dia bars as reinforcement at every third layer wherever specified (Reinforcement shall be measured and paid for under relevent item ) and as directed by Engineer-in-Charge.
87
-
-
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
87
-
-
SH : STEEL WORK
-
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
105
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Electric resistance or induction butt welded tubes
131
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works
2056
-
-
SH: JOINERY WORKS
-
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).The rate shall includes cost and conveyance of all materials,labour , lead, lift, etc. complete as directed by Engineer-in-Charge at all levels. - Second class teak wood
8
-
-
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood
60
-
-
Providing and fixing slimline concealed door closer , with necessary accessories like SS 304 screws etc, including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by the Engineer-in-Charge at all levels.(The purchase price (excluding GST)considered for door closer is Rs.7871/no and any deviation plus or minus in the purchase price (excluding GST) will be adjusted(paid extra or deducted) while making payment to the contractor).
28
-
-
Providing and fixing SS- 304 grade floor mounted door stopper of approved make and design in SS mirror polished finish, with necessary accessories etc. including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by the Engineer-in-Charge.(The purchase price (excluding GST) considered for door stopper is Rs.466/no and any deviation plus or minus in the purchase price (excluding GST) will be adjusted(paid extra or deducted) while making payment to the contractor).
28
-
-
Providing and fixing SS-304 grade mirror polished finish ball bearing butt hinges of 100x75x3 mm size including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by the Engineer-in-Charge at all levels.(The purchase price (excluding GST) considered for butt hinge is Rs.242/no and any deviation plus or minus in the purchase price (excluding GST)will be adjusted(paid extra or deducted) while making payment to the contractor).
89
-
-
Providing and fixing door lever handle in stainless steel finish including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by the Engineer-in-Charge at all levels.(The purchase price (excluding GST) considered for door lever handle & accessories is Rs.2010 /no and any deviation plus or minus in the purchase price (excluding GST)will be adjusted(paid extra or deducted) while making payment to the contractor).
28
-
-
Providing and fixing tower bolt of 150mm size in mirror polished SS - 304 grade with necessary SS 304 grade screws etc. complete including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by the Engineer-in-Charge.(The purchase price considered for tower bolt is Rs.443/no excluding GST and any deviation plus or minus in the purchase price will be adjusted (paid extra or deducted) while making payment to the contractor).
59
-
-
Supplying and fixing Entrance door of size 2000x2700 mm consisting of the following. Epoxy finished MS frame work of 50x25x6mm,50x25x3.2mm and 25x25x2mm shall be provided as per drawing.3+3+1 mm laminate clear glass provided for shutters. fixing with silicon, u beading , hinges, screws etc .The purchase price( including GST) of laminate plain glass should be taken as Rs.250/sft and any deviation plus or minus in the purchase price ( including GST) in approved shade will be adjusted (paid extra or deducted) while making payment to the contractor. All work shall be done as per drawing no ID-DT-LP-ED-GF-AL-12.0.0 and other related drawings. The rate includes cost and conveyance of all materials,all hardwares, labour charges, lead, lift, etc complete as directed by Engineer-in-Charge at all levels.
1
-
-
SH : FLOORING WORK
-
-
-
Providing and laying full body vitrified tile flooring (any shade) 1200 x 600 mm, 9-10 mm thick with water absorbtion less than 0.08% of first quality confirming to IS:15622 with each tile having abrasion resistance less than 144 cubic mm,breaking strength greater than or equal to 6000N, scratch hardness minimum 5, which is stain resistant and chemical resistant of approved make, shade and pattern laid with cement based high polymer modified quickset adhesive conforming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) including cost and conveyance of all materials, labour charges,lead, lift, curing, etc, complete and tile protection till handover as directed by Engineer-in-Charge at all levels .The rate includes cutting the sharp edges of tiles with specialised machinery wherever required . The purchase price( including GST) of vitrified tile should be taken as Rs.818/sqm and any deviation plus or minus in the purchase price ( including GST) in approved shade will be adjusted (paid extra or deducted) while making payment to the contractor.The above work shall be carried out by an agency having sufficient experience in flooring and only skilled and experienced persons shall be employed for this purpose.
133
-
-
Providing and laying Glased vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 1200x600 mm The purchase price( including GST) of vitrified tile should be taken as Rs.699/sqm .The above work shall be carried out by an agency having sufficient experience in flooring and only skilled and experienced persons shall be employed for this purpose.
372
-
-
Providing and laying full body vitrified tile flooring (any shade) 1600 x 800 mm, 9 mm thick with water absorbtion less than 0.08% of first quality confirming to IS:15622 with each tile having abrasion resistance less than 144 cubic mm,breaking strength greater than or equal to 6000N, scratch hardness minimum 5, which is stain resistant and chemical resistant of approved make, shade and pattern laid with cement based high polymer modified quickset adhesive conforming to IS:15477, in minimum 6mm thickness (as per manufactures' specification) including cost and conveyance of all materials, labour charges,lead, lift, curing, etc, complete and tile protection till handover as directed by Engineer-in-Charge at all levels .The rate includes cutting the sharp edges of tiles with specialised machinery wherever required . The purchase price( including GST) of vitrified tile should be taken as Rs.1345/sqm and any deviation plus or minus in the purchase price ( including GST) in approved shade will be adjusted (paid extra or deducted) while making payment to the contractor.The above work shall be carried out by an agency having sufficient experience in flooring and only skilled and experienced persons shall be employed for this purpose.
770
-
-
Providing and laying Glased vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 1600x800 mm The purchase price( including GST) of vitrified tile should be taken as Rs.968/sqm .The above work shall be carried out by an agency having sufficient experience in flooring and only skilled and experienced persons shall be employed for this purpose
256
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red.Area of slab over 0.50 sqm
53
-
-
Extra for providing edge moulding of polished granite of approved thickness including machine polishing to edge to give high gloss finish, etc. complete as per design and as approved by Engineer-in-Charge at all levels.
105
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc.complete.
23
-
-
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab,including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
129
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
52
-
-
SH : FALSECEILING WORKS
-
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long The perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
12.5 mm thick tapered edge gypsum moisture resistant board.
355
-
-
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner uitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm ade out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, utting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.
14
-
-
SH: FINISHING WORKS
-
-
-
12mm cement plaster of mix 1:4 (1 cement : 4 fine sand)including cost and conveyance of all materials, lead, lift, labour charges, curing, scaffolding, sundries , etc complete at all levels as directed by Engineer-in-Charge .
503
-
-
15mm cement plaster of mix 1:4 (1 cement : 4 fine sand)including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete at all levels as directed by the Engineer-in-Charge .
648
-
-
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
1153
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1153
-
-
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.two coats.
734
-
-
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat,preparation of surface, etc. complete.
67
-
-
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs
110
-
-
SH : WATERPROOFING AND MISCELLANEOUS WORK
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry
415
-
-
Providing and installing 1.5mm thick PVC membrane water proofing of approved manufacture for roof garden of a single layer membrane, Material shall conform to the physical and chemical properties like the membrane is UV stable, has high mechanical strength & puncture resistance and is polyester mesh reinforcement. The upper sand grey layer, which is exposed, is characterized by an extremely high resistance to weathering and ultraviolet rays, whereas the lower black layer is resistant to puncturing. The upper sand grey layer, which provides lower heat absorption, increased longetivity and aesthetic qualities, represents 10-15% of the membrane thickness and the black underside, which protects against UV damage, 85-90%. The membrane is laid on the non-woven geotextile separation layer as un-adhered system by hot air welding at 300-400oC. (The above work shall be carriedout by an agency having sufficient experience in membrane water proofing and should ensure a guarantee of 10 years. Only skilled and experienced persons shall be employed for this purpose.) - 75 mm dia
45
-
-
-do- 110 mm dia
26
-
-
-do- 160 mm dia
1
-
-
Providing and supplying heavy duty injection adhesive for rebar fixing using Epoxy resin of 330/500ml HILTI HIT-RE 500 V3/or equivalent for fixing 8 mm dia rebar. Embedment depths of 100mm as mentioned from the Structural consultants, including supplying two component system consisting of resin and hardener in 3:1 ratio; filling above mentioned mortar with standard dispenser before inserting rebar strictly as per the manufacturers recommendations.The installation and the setting instructions should be strictly followed as per the manufacturers recommendations.The chemical anchor shall carry ETA, COLA and DIBT approval and fire approval. Application can be done in both wet & dry concrete condition, corossion tested. The approved chemical shall be installed in hammer drill, diamond coring holes. including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels.
204
-
-
Providing and fixing temporary partition upto ceiling height consisting of 6mm ply panelled over 9mm ply frame work at 600mm c/c including providing and fixing of frame work fixed to the floor and ceiling with necessary framework and support . The boards are to be fixed to the frame work with joints staggered to avoid through cracks, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, as per the site requirement and direction of engineer in charge all complete.
265.6
-
-
SH : DISMANTLING & DEMOLITION WORKS
-
-
-
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
13
-
-
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
3
-
-
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar
73
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below
11
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area beyond 3 sq. metres
7
-
-
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead :
2
-
-
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
105
-
-
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
210
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm
210
-
-
Dismantling false ceiling substructure/rods including disposal of unserviceable surplus material and stacking of serviceable material within 5 km lead as directed by Engineer-in-charge.
105
-
-
SH : INTERIOR WORKS
-
-
-
Providing and placing in position two level-beverage station counter of size 2200x2200x750mm consisting of the following: All vertical and horizontal sides shall be provided with 18 mm thick BWP ply and Epoxy painted MS frame work of 50x25x3.2mm as per drawing.Exposed facia shall be finished with vitrifiled tile.Top portion of the counter finished with 15mm thick tile of approved size and colour . The unit is anchored to the floor with necessary screws and plates as per drawing .Edges of the counter shall be moulded as per the direction of Engineer in charge .Front facia shall be provided with GFRC moulded pannels as per the detailed drawing. All work shall be done as per drawing no ID-DT-GF-BC-AL-16.1.0 and other related drawings. The quoted rate includes the cost of all materials,labour charges, all electrical installation like LED strip ( LED strip of maximum wattage 5 watt per meter, /=3000K, IP20 along with Al profile, efficay90 lm/ W, lumen maintenance of L70 @ 50,000 burning hours prewired complete with all necessary accessories including driver as required complete). The quoted rate includes the cost of all materials,labour charges, all electrical installation, painting, hinges,screws ,bolts ,making necessary cut outs,, control space,switches and sockets as per drawing, adhesives, fabrication, transportation, placing in position,loading and unloading, etc complete as directed by the Engineer-in-charge.The rate includes protecting the fixture with proper covering till handing over as directed by the Engineer-in-Charge.
1
-
-
Providing and placing in position Live counter of size 8800X750x800mmconsisting of the following: All vertical and horizontal sides shall be provided with 18 mm thick BWP ply and Epoxy painted MS frame work of 50x25x3.2mm as per drawing.Exposed facia shall be finished with 3mm thick ash wood veneer of approved shade .Top portion of the counter finished with 15mm thick tile of approved size and colour . The unit is anchored to the floor with necessary screws and plates as per drawing .Edges of the counter shall be moulded as per the direction of Engineer in charge .Front facia shall be provided with GFRC moulded pannels as per the detailed drawing.All work shall be done as per drawing no ID-DT-GF-BC-AL-16.1.0 and other related drawings . he quoted rate includes the cost of all materials,labour charges, all electrical installation like LED strip ( LED strip of maximum wattage 5 watt per meter, /=3000K, IP20 along with Al profile, efficay90 lm/ W, lumen maintenance of L70 @ 50,000 burning hours prewired complete with all necessary accessories including driver as required complete) The quoted rate includes the cost of all materials,labour charges, all electrical installation, painting, hinges,screws ,bolts ,making necessary cut outs,, control space,switches and sockets as per drawing, adhesives, fabrication, transportation, placing in position,loading and unloading, etc complete as directed by the Engineer-in-charge.The rate includes protecting the fixture with proper covering till handing over as directed by the Engineer-in-Charge.
1
-
-
Providing and placing in position Bar counter & display unit of size 5800X1910mm consisting of the following: All vertical and horizontal sides shall be provided with 18 mm thick BWP ply and ash wood veneer of 4mm thick of approved shade. Botttom shelf shall be supported with Epoxy painted MS frame work of 50x25x3.2mm as per drawing.Exposed area except Front facia shall be finished with 4mm thick ash wood veneer of approved shade .Top portion of the bottom unit shall be finished with 15mm thick tile of approved size and colour and it is fixed to a 9mm thick BWP ply . The unit is anchored to the wall with necessary screws and plates as per drawing .Tile edges of the counter shall be moulded as per the direction of Engineer in charge .Front facia shall be provided with 5mm thick black mirror and brass lining as per the detailed drawing. All work shall be done as per drawing no ID-DT-GF-BC-AL-16.4.0 and other related drawings. The quoted rate includes the cost of all materials,labour charges, all electrical installation like LED strip ( LED strip of maximum wattage 5 watt per meter, /=3000K, IP20 along with Al profile, efficay90 lm/ W, lumen maintenance of L70 @ 50,000 burning hours prewired complete with all necessary accessories including driver as required complete) lighting, painting, hinges,screws ,bolts ,making necessary cut outs,switches and sockets as per drawing, adhesives, fabrication, transportation, placing in position,loading and unloading, etc complete as directed by the Engineer-in-charge.The rate includes protecting the fixture with proper covering till handing over as directed by the Engineer-in-Charge.
1
-
-
Providing and placing in position Live counter & area display unit of size 6800X1910mm consisting of the following: All vertical and horizontal sides shall be provided with 18 mm thick BWP ply and ash wood veneer of 4mm thick of approved shade. Botttom shelf shall be supported with Epoxy painted MS frame work of 50x25x3.2mm as per drawing.Exposed area except Front facia shall be finished with 4mm thick ash wood veneer of approved shade .Top portion of the bottom unit shall be finished with 15mm thick tile of approved size and colour and it is fixed to a 9mm thick BWP ply . The unit is anchored to the wall with necessary screws and plates as per drawing .Tile edges of the counter shall be moulded as per the direction of Engineer in charge .Front facia shall be provided with 5mm thick black mirror and brass lining as per the detailed drawing. All work shall be done as per drawing no ID-DT-GF-BC-AL-16.4.0 and other related drawings. The quoted rate includes the cost of all materials,labour charges, all electrical installation like LED strip lighting, painting, hinges,screws ,bolts ,making necessary cut outs,switches and sockets as per drawing, adhesives, fabrication, transportation, placing in position,loading and unloading, etc complete as directed by the Engineer-in-charge.The rate includes protecting the fixture with proper covering till handing over as directed by the Engineer-in-Charge.
1
-
-
Providing and placing in position Built in seat of size 16000X900x600mm consisting of the following: All exposed faces shall be finished with 20 mm thick teakwood panel. Epoxy painted MS frame work of 25x25x3.2mm and 50x25x3.2mm shall be provided as per drawing.Seating base and back shall be provided with 12mm thick BWP ply and fabic covered foam of approved make and shade shade .Seating base foam thickness shall be 40mm and backing foam thickness shall be 75 mm.Seat backing shall be supported on a 20mm thick teak wood panel and it is fixed with a hardwood block as per detailed drawing . The unit is anchored to the floor with necessary screws and plates as per drawing .All wooden edges shall be metred joint . All work shall be done as per drawing no ID-DT-LP-BS-AL-13.0.0 and other related drawings. The quoted rate includes the cost of all materials,labour charges, all electrical installation, painting, hinges,screws ,bolts ,making necessary cut outs,, control space,switches and sockets as per drawing, adhesives, fabrication, transportation, placing in position,loading and unloading, etc complete as directed by the Engineer-in-charge.The rate includes protecting the fixture with proper covering till handing over as directed by the Engineer-in-Charge.
2
-
-
Providing and placing in position Reception desk of size 3500X1050x1050mm consisting of the following: All exposed faces shall be finished with 3 mm thick skineer fabric steel blak and inside shall be finished with ashwood veneer of 4mm thick. .Desk framing shall be provided with 18mm thick BWP ply and finishing shall be as per drawing .All edges shall be metred joint .Top of the desk finished with 15 mm thick vitrified tile of approved make and colour as per the detailed drawing. All work shall be done as per drawing no ID-DT-GF-RD-AL-22.2.0 and other related drawings. The quoted rate includes the cost of all materials,labour charges, all electrical installation like LED strip ( LED strip of maximum wattage 5 watt per meter, /=3000K, IP20 along with Al profile, efficay90 lm/ W, lumen maintenance of L70 @ 50,000 burning hours prewired complete with all necessary accessories including driver as required complete). The quoted rate includes the cost of all materials,labour charges, all electrical installation, painting, hinges,screws ,bolts ,making necessary cut outs,, control space,switches and sockets as per drawing, adhesives, fabrication, transportation, placing in position,loading and unloading, etc complete as directed by the Engineer-in-charge.The rate includes protecting the fixture with proper covering till handing over as directed by the Engineer-in-Charge.
1
-
-
Providing and placing in position buffet counter of size 7800x3100x75mm consisting of the following: Micro topping finishes, vitrified table top cladding. Desk framing shall be provided with 18mm thick BWP ply and finishing shall be as per drawing .All edges shall be metred joint. Top of the desk finished with 15 mm thick vitrified tile of approved make and colour as per the detailed drawing. All work shall be done as per drawing no ID-DT-GF-RD-AL-22.2.0 and other related drawings. The quoted rate includes the cost of all materials,labour charges, all electrical installation like LED strip ( LED strip of maximum wattage 5 watt per meter, /=3000K, IP20 along with Al profile, efficay90 lm/ W, lumen maintenance of L70 @ 50,000 burning hours prewired complete with all necessary accessories including driver as required complete) . The quoted rate includes the cost of all materials,labour charges, all electrical installation, painting, hinges,screws ,bolts ,making necessary cut outs,, control space,switches and sockets as per drawing, adhesives, fabrication, transportation, placing in position,loading and unloading, etc complete as directed by the Engineer-in-charge.The rate includes protecting the fixture with proper covering till handing over as directed by the Engineer-in-Charge.
1
-
-
Providing and placing in position Plywood ceiling including curved portion as per drawing finished with 4 mm thick ash wood veneer.12mm thick BWP ply shall be anchored to the true ceiling .18mm BWP ply with ash wood veneer finish shall be fixed to the 12mm thick BWP ply.75x15mm thick 18mm thick ply pieces fixed to the 18mm thick BWP ply base at an interval of 75mm c/c with necessary screws.Esposed faces of ply wood shall be finished with 4mm thick PU finished ash wood veneer . All work shall be done as per drawing no AR-MP-LP-FC-GF-AL-4.2.0 and other related drawings. The quoted rate includes the cost of all materials,labour charges, all electrical installation, painting, hinges,screws ,bolts ,making necessary cut outs,, control space,switches and sockets as per drawing, adhesives, fabrication, transportation, placing in position,loading and unloading, etc complete as directed by the Engineer-in-charge.
580
-
-
Providing and placing in position Plywood ceiling finished with 4 mm thickblack mirror.12mm thick BWP ply shall be anchored to the true ceiling .18mm BWP ply with 4mm thick black mirror shall be fixed to the 12mm thick BWP ply.4mm thick mirror shall be fixed to the 18mm thick BWP ply base using necessary frame work/studs . All work shall be done as per drawing no AR-MP-LP-FC-GF-AL-4.2.6,AR-DT-SM-SN-AL-19.3.3 and other related drawings. The quoted rate includes the cost of all materials,labour charges, all electrical installation, painting, hinges,screws ,bolts ,making necessary cut outs,, control space,switches and sockets as per drawing, adhesives, fabrication, transportation, placing in position,loading and unloading, etc complete as directed by the Engineer-in-charge.
135
-
-
Providing and placing in position 6mm thick BWP plywood panelling finished with Suzuka cement texture paint and brass inlay. All work shall be done as per drawing no,ID-DT-LP-WE-AL-20.5.0 and other related drawings. The quoted rate includes the cost of all materials,labour charges, all electrical installation, painting, hinges,screws ,bolts ,making necessary cut outs,, control space,switches and sockets as per drawing, adhesives, fabrication, transportation, placing in position,loading and unloading, etc complete as directed by the Engineer-in-charge.
226
-
-
Providing and placing in position 6mm thick GFRC panelling finished with approved texture paint . All work shall be done as per drawing no,ID-DT-LP-AL-BS-13.4.0, ID-DT-LP-AL-BS-13.4.5 and other related drawings. The quoted rate includes the cost of all materials,labour charges, all electrical installation, painting, hinges,screws ,bolts ,making necessary cut outs,, control space,switches and sockets as per drawing, adhesives, fabrication, transportation, placing in position,loading and unloading, etc complete as directed by the Engineer-in-charge.
31
-
-
Providing and panelling wall with hardwood strips of 20x9mm size and MS frame work as per drawing.9mm thick BWP plywood screwed to the masony wall .Ash wood finished 20x9mm thick hardwood srips provided over the ply and 20x20x2mm thick black colour epoxy coated MS frame lining provided as per detailed drawing. . Wall panelling shall be finished as per drawing. All work shall be done as per drawing no,ID-DT-LP-RWE-RBW-6.3.0 and other related drawings.The quoted rate includes the cost of all materials,labour charges, all electrical installation, painting, hinges,screws ,bolts ,making necessary cut outs,, control space,switches and sockets as per drawing, adhesives, fabrication, transportation, placing in position,loading and unloading, etc complete as directed by the Engineer-in-charge.
37
-
-
Providing and panelling wall with mirror cladding as per drawing.12mm thick BWP plywood screwed to the masony wall provided with4mm thick mirror as per detailed drawing. Wall panelling shall be finished as per drawing.All work shall be done as per drawing no,ID-DT-LP-RWE-RBW-6.4.0 and other related drawings. The quoted rate includes the cost of all materials,labour charges, all electrical installation, painting, hinges,screws ,bolts ,making necessary cut outs,, control space,switches and sockets as per drawing, adhesives, fabrication, transportation, placing in position,loading and unloading, etc complete as directed by the Engineer-in-charge.
76
-
-
Providing and fixing smoking room counter of size 5200x400x200 mm using 12mm thick cement fibre board and 15mm thick vitrified tile of approved size and make.12mm thick cement fibre board fixed to the wall with MS frame work of 25x25x3.2 mm thick finished with black colour epoxy. 12mm thick cement fibre board fixed to the MS frame work and 15mm thick vitrified tile fixed to the cement fibre board.An ash holder tray 120x90mm size provided in the counter as per drawing.All work shall be done as per drawing no AR-DT-SM-SN-AL-19.3.2 and other related drawings. The quoted rate includes the cost of all materials,labour charges, all electrical installation, painting, hinges,screws ,bolts ,making necessary cut outs,, control space,switches and sockets as per drawing, adhesives, fabrication, transportation, placing in position,loading and unloading, etc complete as directed by the Engineer-in-charge.
2
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the
gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
5303
-
-
Providing and applying expansion joint treatment including surface and edge preparation ,applying masking tape to prevent discolouration or application on unwanted Areas and cover the joint,mixing of epoxy adhesive premix each component individually in a proportion of 2 parts of component A to 1 part of component B by wt. and mix for about 3 minutes with a low speed drill or paddle until get a uniform colour. Apply theapproved adhesive on both sides of the joint.
Place the high performance, Polyol Phin based membrane system 2mm thickness and 20cm width/ strip in position on to the epoxy adhesive and using a hard roller force the tape into the epoxy. Apply a top layer of adhesive on the membrane / strip. The adhesive should extend upto 5-10mm beyond the edge of the sheeting as per site condition. Remove the masking tape.Overlapping joints shall be sealed with PU Sealant. Fix the cover plate (0.4mm or 0.6mm aluminum sheet) fixing on one side of the joint and keeping the other end free for protecting the membrane. The top layer of the backup board shall be cut and this gap then again be sealed with a flexible, 1 part polyurethane sealant .The installation and the setting instructions should be strictly followed as per the manufacturers recommendations and as directed by Engineer in Charge .The rate shall be inclusive of cost of all materials, transportation, lead, lift, labour charges, cleaning and clearing the debris from all levels and disposing etc complete, as specified by the Engineer-In-Charge. (The above work shall be carriedout by an agency having sufficient experience in expansion joint treatment and should ensure a guarantee of 5 years. Only skilled and experienced persons shall be employed for this purpose.)
42
-
-
Providing & Fixing of the MIGUA ESF 37 /35 or equivalent AL Floor to Floor Flat Model, for 25 mm Expansion Joints Aluminum Covers Profiles, having a Hard Wearing, Maintenance Free, long Lasting design having Smooth Surface. The Exp. Joint Covers should have large movement capacity +/- 10mm. The design of the Exp. Joint Cover System should be such that it should avoid any accumulation of dirt. The Exp. Joint Cover should have an Semitic and non-bump with minimum expose surface. The surface of the system should be in the Mill finish. The total Visible width of the profile should not be more than 37 mm (+/- 5 mm).The system should be capable of heavy load capacity upto 600 KN of lorry tier load.
42
-
-
SH :SANITARY INSTALLATION
-
-
-
Providing, fixing and commissioning of Star white wall-hung European WC with C.P. bolts, nuts, C.I. brackets or other hanging arrangement, with white solid plastic seat and cover with lid, C.P. brass hinge rubber buffers, with accessories,C.I brackets painted with two coats of enamel paint of approved shade over a coat of primer. C.P. brass screws, wooden cleats and push fit type pan connector, cutting and making good the wall and floors wherever required, including fixing Concealed Flushing Cistern with half frame, dual flush (flow rate 3.0/6.0 LPF) Actuator Plate, flush-stop function, noise less float valve and fast filling action with all components & parts of high quality including wall plate, fixing frame and set etc. complete in all respects as per the directions and to the satisfaction of Engineer-in-charge. (The purchase price (exclusive of all taxes, transporation and loading) of WC pan with soft close seat and lid including all accessories shall be taken as Rs 41825/- and concealed cistern, wall plate with flush button shall be Rs 5000/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
11
-
-
Providing, fixing, testing and commissioning battery based infrared sensor operated Urinals, having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and complete in all respects as per the directions and to the satisfaction of Engineer-in-charge. Purchase Rate for Urinals with sensor - Rs 33575 and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
6
-
-
Providing and fixing urinal partition with frosted glass material as per manufacturers specification and complete in all respects as per the directions and to the satisfaction of Engineer-in-charge. Purchase Rate for urinal pertition - Rs 3314 and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor) The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
6
-
-
Providing, fixing, testing and commissioning of Under Counter Wash Basin installed on existing counter with MS brackets, sensor Pillar Cock, PVC connection pipe, one no 15mm dia CP angle stop cock with wall flange , 32 mm dia CP waste coupling, 32 mm dia CP brass bottle trap. The works shall include cutting and making good the walls and floors complete in all respects as per the directions and to the satisfaction of Engineer-in-charge. The purchase price exclusive of all taxes, transportation and loading of WB is Rs12356/-, sensor- Rs 27250/-, angle valve - Rs 723/-, bottle trap- Rs 1772/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted )The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
17
-
-
Providing, fixing and commissioning of CP brass hand spray with lever control (health faucet) of make 1meter long flexible tube and wall hook, CP brass one way angle valve and all fittings etc. angle valve should have inbuld pressure safety system complete, flexible corrugated stainless steel water connection pipe with all accessories complete, 15 mm dia 450mm long, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels. The purchase price exclusive of all taxes, transportation, loading of angle valve- Rs 723/-, Health Faucet - Rs 4661/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
11
-
-
Providing and fixing sanitary fixtures for handicapped toilet including one wash basin of approved size, one pair mounting brackets and all other related CP brass fittings like pillar cock, bottle trap,angle valve,waste coupling, health faucet etc.One number EWC & Cistern with raised soft push button for convenient access complete with fittings & seat cover , one no.stainless steel hinged rail 76 cm & four nos. of stainless steel grab rails 60 cmetc of approved make as per drawing & as per manufactures specification .The rate is including cost and conveyance of all materials, labour charges, lead,lift,cutting and making good the walls,floors,slab wherever required etc complete, testing and commissioning to the satisfaction of Engineer in Charge as directed by the Engineer in charge at all levels.The purchase price(exclusive of all taxes) of handicapped toilet set is Rs 98586/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
1
-
-
Providing and fixing tissue paper dispenser of approved quality and make including cost and conveyance of all materials labour charges ,lead, lift, ,cutting and making good the walls and floors wherever required complete in all respects as per the directions and to the satisfaction of Engineer-in-charge at all levels. (The purchase price(exclusive of all taxes) of tissue paper dispenser is Rs 5401/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
4
-
-
Providing and fixing CP brass long body bib cock of approved quality and make conforming to IS standards and weighing not less than 690 gms including cost and conveyance of all materials, labour charges, sundries,lead,lift,cutting and making good the walls,floors,slab etc complete, testing and commissioning to the satisfaction of Engineer in Charge as directed by the Engineer in charge at all levels. (The purchase price(exclusive of all taxes) CP brass long body bib cock is Rs.9392/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted )The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
15 mm nominal bore
1
-
-
Providing and fixing frameless mirror of thickness 5.5 to 6mm, with all four edges machine polished/bevelled and back side protected with safety film and 4 mm thick BWP grade Plywood backing and fixed on walls with mirror screws(spacer). The rate is including cost and conveyance of all materials, labour charges, lead,lift ,cutting and making good the walls,floors,slab etc complete in all respects as per the directions and to the satisfaction of Engineer-in-charge. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
19
-
-
Providing and fixing floor trap with cockroach trap (multi trap), SS304 gradefloor grating with cup including cost and conveyance of all materials, labour charges, sundries etc completeas directed by the directed by the Engineer-in-Charge at all levels (The purchase price (exclusive of all taxes) cockroach trap with floor gratings Rs1573/- and PVC multi floor trap is Rs.202/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor)
23
-
-
Providing and fixing under counter mounting pressmatic/automatic liquid soap dispenser of approved make including cost and conveyance of all materials labour charges, lead, lift, cutting and making good the walls, floors and slab wherever required etc complete, testing and commissioning to the satisfaction of Engineer in Charge as directed by the Engineer in Charge at all levels .(The purchase price(exclusive of all taxes) of under counter mounting pressmatic/ automatic liquid soap dispenser is Rs 5252/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor).The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
6
-
-
Providing and fixing stainless steel A ISI 304 (18/8) sink of size 610x460mm bowl depth 250 mm without drain board or of approved size, CP brass bottle trap, CP brass waste coupling , CP brass sink cock with regular swinging spout with wall flange etc per IS: 13983 with C.I. brackets & stainless steel plug, including painting of fittings and brackets, cutting and making good the walls ,floors,slab wherever required,testing and commissioning complete in all respects as per the directions and to the satisfaction of Engineer-in-charge. Purchase Rate for Sink - Rs 21000, sink cock - Rs 1818, angle valve-Rs 723/- botle trap-1772/-, waste coupling 415/-(exclusive of all taxes, transporation and loading) and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
11
-
-
Providing and fixing C.P. brass concealed stop cock (control valve) of standard design and of approved make conforming to IS:8931.The rate is including cost and conveyance of all materials, labour charges, lead,lift,cutting and making good the walls,floors,slab etc complete, testing and commissioning to the satisfaction of Engineer in Charge as directed by the Engineer in charge at all levels.(The purchase price(exclusive of all taxes) of C.P. brass concealed stop cock (control valve) is Rs 4988/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
20 mm nominal bore.
15
-
-
Providing and fixing cleanout including cost and conveyance of all materials labour charges ,lead, lift, cutting and making good the walls and floors etc complete testing and commissioning to the satisfaction of Engineer in Charge as directed by the Engineer in Charge at all levels.- 75 mm dia
3
-
-
Providing and fixing cleanout including cost and conveyance of all materials labour charges ,lead, lift, cutting and making good the walls and floors etc complete testing and commissioning to the satisfaction of Engineer in Charge as directed by the Engineer in Charge at all levels.- 110 mm dia
9
-
-
Providing and fixing floor trap with cockroach trap (multi trap), concealed, SS304 gradefloor grating with cup including cost and conveyance of all materials, labour charges, sundries etc completeas directed by the directed by the Engineer-in-Charge at all levels .(The purchase price(exclusive of all taxes)cockroach trap with floor gratings Rs1573/- and pvc multi floor trap is Rs.202/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
2
-
-
Providing and fixing premium quality shower set consisting of overhead shower (square shape) single flow (body and face plate stainless steel with chrome finish) of approved make and model including cost and conveyance of all materials, labour charges, lead , lift etc., complete, testing and commissioning to the satisfaction of Engineer in Charge as directed by the Engineer-in-Charge at all levels.(The purchase price considered including all accessories for overhead shower , hand shower , for divertor,wall outlet is Rs 105976/- including all accessories any deviation plus or minus in the purchase price will be adjusted in the price quoted.)The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
3
-
-
Providing, fixing and testing water heater as per the instructions of the Engineer in charge at all levels.(The purchase price(exclusive of all taxes)of water heater is Rs 17097/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
4
-
-
Providing and fixing of stainless steel toilet paper holder including cutting and setting in walls with white cement joints and making good the wall. Purchase Rate to be Rs. 1931/- per unit exclusive of GST, loading, transportationand any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
12
-
-
Supply and Installation of Twin Robe Hook of approved design and make including cutting and setting in walls with white cement joints and making good the wall. Purchase Rate to be Rs. 922/- per unit exclusive of GST, loading, transportationand any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
12
-
-
Supply and Installation of Soap Dish of approved design and make including cutting and setting in walls with white cement joints and making good the wall. Purchase Rate to be Rs. 1352/- per unit exclusive of GST, loading, transportationand any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
3
-
-
Supply and Installation of Towel Rack of approved design and make including cutting and setting in walls with white cement joints and making good the wall. Purchase Rate to be Rs. 4491/- per unit exclusive of GST, loading, transportationand any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
3
-
-
Providing and fixing water cooler of approved size and make with storage capacity of 80 litres per hour and normal cooling capacity 40litres per hour with hot,cold and normal water provision with stainless steel body and seam welded stainless steel tank with adjustable cold water thermostat, classic water purification system of capacity 1 litre per minute etc complete with all accessories of approved quality and make including cost and conveyance of all materials labour charges ,lead, lift, cutting and making good the walls,floors,slabs etc complete as directed by the Engineer in Charge at all levels.(The purchase price(exclusive of all taxes) of Stainless Steel Cooler of 80 litre capacity is Rs 50763/- purification system- 9889/- brass pillar trap- 2750/-and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 1 years and only skilled and experienced persons shall be employed for this purpose
2
-
-
Providing and fixing floor drain with rail grating with gloss/matt finish.AISI304(18/8)graded stainless steel material, length 450mm& width 100 mm of approved make including cost and conveyance of all materials, labour charges, sundries etc completeas directed by the directed by the Engineer-in-Charge at all levels . Purchase Rate to be Rs. 5670/- per unit exclusive of GST, loading, transportationand any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
17
-
-
SH :SANITARY WORKS
-
-
-
Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in charge of PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps and supports including cutting and making good the walls,testing the lines rectifying any leakages or defects,etc. complete for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for concealed work as directed by the Engineer- in-Charge. - 110mm OD (6 kg/cm2)
51
-
-
-do- 75mm OD(6kg/cm2)
28
-
-
-do- 50mm OD(6 kg/cm2)
29
-
-
Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in Charge of PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps and supports testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for internal work-exposed on walls as directed by the Engineer in charge.
75mm dia (6 kg/cm2)
6
-
-
Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in Charge of PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps and supports testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for internal work-exposed on walls as directed by the Engineer in charge. 110mm dia (6 kg/cm2)
11
-
-
Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes & push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost andbrconveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc. complete.as directed by Engineer-in-Charge for water supply. (Proper pipe supports shall be provided at suitable locations.)-Exposed Works- 110 mm OD
80
-
-
Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes & push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps, saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc., cutting and making good the walls etc. complete.as directed by Engineer-in-Charge for water supply.(Proper pipe supports shall be
provided at suitable locations.)-Concealed Work- 50mm OD
6
-
-
-do- 75mm OD
11
-
-
-do- 110mm OD
16
-
-
-do- 160mm OD
3
-
-
SH :WATER SUPPLY WORKS
-
-
-
Supplying, fixing, testing and commissioning to satisfaction of Engineer in charge of Chlorinated Polyvinyl chloride(CPVC) SDR 11 pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittingsi/c fixing the pipes with clamps/supports at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete.The rate is including cost and conveyance of all materials, labour charges, sundries,lead,lift,all taxes etc complete as per the direction of Engineer in charge at all levels.(Concealed work including cutting chases and making good the walls etc).- 32 mm nominal outer dia pipes
8
-
-
-do- 25 mmnominal outer dia pipes
30
-
-
-do- 20 mmnominal outer dia pipes
42
-
-
-do- 40 mm nominal outer dia pipes
6
-
-
Supplying, fixing, testing and commissioning to satisfaction of Engineer in charge of Chlorinated Polyvinyl Chloride (CPVC- SDR11) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps/supports at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Internal work - Exposed on wall
50 mm nominal outer dia pipes
3
-
-
-do- 40 mm nominal outer dia pipes
10
-
-
-do- 32 mm nominal outer dia pipes
56.9
-
-
-do -25 mmnominal outer dia pipes
68.3
-
-
-do- 20 mmnominal outer dia pipes
46
-
-
Supplying, fixing, testing and commissioning to satisfaction of Engineer in charge of gun metal gate valve with C.I. Wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer- in-Charge at all levels- 40 mm dia nominal bore
4
-
-
-do- 32 mm dia nominal bore
4
-
-
-do- 25 mm dia nominal bore
4
-
-
-do- 20 mm dia nominal bore
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements