Water And Land Management Institute Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 50,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
WALMI/2021-22/IW/WORK_INDENT14Bid Award Id
ViewTender No
WALMI/2021-22/IW/WORK_INDENT14Tender Authority
Water And Land Management Institute ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
CC bed for Tank: KSRB 14.9-2 : Providing and laying M-15 cement concrete flooring 60 mm thick with metallic concrete hardner toping, under layer of 45mm thick M-15 cement concrete using broken granite metal of 20mm and down size and top layer of 15mm thick metallic cement hardner consisting of mix 1:2 ( 1 cement hardner mix : 2 granite metal 10mm nominal size ) by volume, with metalic hardening compound of approved quality mix in the ratio of 4:1 ( 4 part of cement = 1 part of metallic floor hardening compound of approved quality by wt ) , including finishing, cost of materials, labour, curing, complete as per specifications. Specification No. KBS 14.4
100
-
80244
Barbed Wire Fence: KSRRB M800- Fencing/ Railing KSRRB M800-17. G.I. Barbed Wire Fencing 1.2 Metre High-Providing and fixing 1.2 metres high GI barbed wire fencing with 1.8 m angle iron posts 40 mm x 40 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 9 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 800.7 as per specifications. MORTH Specification No. 807
68.9
-
17114.76
Fabricating, providing and erecting in poiston of M S Ornamental security Grill Gate without hot dip using 75 x 12mm M S Flat for alround frame work with verticals at the centre and horizontal centere support M S Square of 20 x20 mm of different heights as shown in the drawing are to be fixed at 16 cms C/C for suqare bars of full height and at 8cms C / C for bottom rods providg ornamental C I Designers at the botom and C I arrows inthe midle and top. The entire frame work is to be fixed by means of expansion bolts to the brick pillars with necesary drillling holes. the work includes providng two coats of enamel painting over one coatr of red lead ready mix primer coat etc complete cost of all labour, painting, erection charges using hoist pulleycranes with all lead and lift, loading, transporting and unloading using hoist pulley cranes, scaffolding charges and all other incidental charges required for successful completion fo the work as per specification and drawings
50
-
7452
Earthwork Excavation-KSRB 2-1.1 : Earthwork in surface excavation in ordinary soil for levelling and lowering the ground manually ( other than foundation of buildings, culverts, road drains and trenches of pipe lines and cables ) and removing the excavated stuff to a distance not exceeding 50m and lift upto 1.5m, excavated surface levelled and neatly dressed, disposed earth to be levelled after breaking of clods and neatly dressed as per specifications. specification.
13.09
-
3520.16
Bed Concrete- KSRB 4-1.3 : Providing and laying in position plain cement concrete of mix 1:4:8 with OPC cement @ 180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregates @ 0.57cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2
1.38
-
8363.82
UCR Masonry- KSRB 5.1-3 : Providing and constructing granite / trap / basalt rubble stone masonry in foundation with cement mortar 1:6 (uncoursed), bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications.KBS 5.1.12
8.47
-
34435.21
CC Coping: Providing and laying in position plain cement concrete of mix 1:2:4 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69 cum and fine aggregtes @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, for coping. Including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2
0.71
-
4539.3
Back filling: KSRB 2.3 : Filling available excavated earth ( excluding rock ) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour complete as per specifications. specification. No. KBS 2.9
7.61
-
2191.6
CC Flooring: KSRB 14.9-2 : Providing and laying M-15 cement concrete flooring 60 mm thick with metallic concrete hardner toping, under layer of 45mm thick M-15 cement concrete using broken granite metal of 20mm and down size and top layer of 15mm thick metallic cement hardner consisting of mix 1:2 ( 1 cement hardner mix : 2 granite metal 10mm nominal size ) by volume, with metalic hardening compound of approved quality mix in the ratio of 4:1 ( 4 part of cement = 1 part of metallic floor hardening compound of approved quality by wt ) , including finishing, cost of materials, labour, curing, complete as per specifications. Specification No. KBS 14.4
43.7
-
35066.63
Brick work : KSRB 6-2.4 : Providing and constructing burnt brick masonry with approved quality of non-modular bricks of standard size of class designation 5.0 Newton per sqmm with cement mortar 1:4 for basement and superstructure including cost of materials, labour charges, scaffolding, curing complete as per specifications. Specification No. KBS 6.2
11.81
-
90618.48
Steel for Lintel: KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 - TMT bars Fe 500
0.06
-
5124.71
Conrete Lintels: KSRB 4.2.7 : Providing and laying in position reinforced cement concrete of design mix M25 with OPC cement @ 340kgs, with 20mm and down size graded granite metal coarse aggregates @0.70cum and fine aggregtes @ 0.47cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintles and beams retaining walls, return walls, walls (any thickness) including attached pilasters, columns, ,pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6
0.72
-
5201.99
Internal Plastering- KSRB15-3.7 : Providing 18mm thick cement plaster in single coat with cement mortar 1:6, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
48.72
-
13428.21
External Plastering- KSRB15-3.7 : Providing 18mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
54.37
-
16650.81
Aluminium windows and ventilators- KSRB 7.11 : Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m; sides and top sections 1.3 mm, thick, weight 0.933 kg/m.shutter frame section comprising top and bottom section of size 40mmx18mm, wall thickness 1.25mm. weight 0.417 kg./m. shutter side outer 40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock section 40mmx26.7mm wall thickness 1.1 mm. thick, weight 0.469 kg/m, the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading all aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and rivetted, in the assembled frame, stiffened with end clips for corners, angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be, with necessary steel screws, raul plugs or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar. using aluminium section anodized to 12 - 15 microns.
7.2
-
33889.39
Aluminium Doors- KSRB 7.17 : Providing, fabricating, assembling and fixing in position aluminium doors using following aluminium mat finish or glossy finish, outer frame plain section 101.6x44.45mm thickness 3.18mm, section weight 2.404 kg/m, door shutters vertical section 44.62x44.45mm thickness 3.18mm, section weight 1.505kg/m, top section 47.62x44.45mm thickness 3.00mm, section weight 1.426kg/m bottom section 114.3x44.45 thickness 3.18mm, section weight 2.646kg/m, door central section 49.91x44.45mm thickness 3.00mm, section weight 1.495 kg/m glazing clips 19x17.3x11mm thickness 0.9mm section weight 0.124kg/m; aluminium sections cut to length joint metred cornersgrinded, the shutters pivoted opening arrangement with heavy duty aluminium alloy automatic door closures floor mounted, providing and fixing standard approved accessories, such as aluminium handle for full width or length, tower bolts, lock, pivots: P.V.C. or rubber gasket with 5.5m. thick plain glass for top and bottom panel; aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherance of mortars or any other sticky materials; the assembled frame fitted with the corner angles, strips and fitted with screws, rawl plugs or teakwood gutties to R.C.C. columns or masonry on sides. beams and flooring in bottom. including cutting, chistling and making good with cement mortar to match the surface; all the frames throughly cleaned free from rust, scale, or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. using aluminium section anodized to 12 - 15 microns.
2.52
-
8755.94
Painting to internal walls- KSRB 15-15.1 : Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. - with primer
48.72
-
5114.63
Painting to External walls- KSRB 15-16.1 : Providing and finishing external walls in two coats with waterproof cement paint of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications. - with primer
54.37
-
6412.4
MS Tube Rafter- Fabricating, supplying and erecting M.S. Tubular Truss of span upto 10m. The bottom and top member is provided with 50x50x6mm double equal angles, welded back to back and in between top and bottom line, in areas of mid section is provided with 50x50x6mm equal single angle for vertical and inclined members and at supporting ends 40x40x5mm single angle is provided. All the members are welded together with 6mm gusset plate as per Drawing. The entire truss is anchored in RCC column by using 4 Nos. of M.S. anchor bolts at each support, with 10mm thick base plate and shoe plate.The work includes cutting, straightening, placing in position of M.S angle and wleding wherever necessary, and applying one coat of red oxide primer coat to all themembers including cost of all materials, labour charges, and hire charges of machineries for cutting, welding, grinding and erection equipments, with all lead and lift, transportation, etc., complete as per specification.
190
-
26307.4
New GI Sheet Roofing - PROVIDING TRAPEZOIDAL PROFILED SHEET Providing and installing of pre painted Galvolume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm +/- 0.02 mm tolerance Zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling/self tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses.
48.01
-
40298.63
Ridge- Providing and installing of approved make pre painted Galvalume iron Accessories, like, plain, ridges, plain gutter, plain flashing, corner Trim, etc. The total coated thickness (TCT) of the sheet shall be 0.47 mm +/- 0.02 tolerance mm Zinc-Alu Alloy coating AZ 150 gsm as per ASTM 1397/755 -550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling / self tapping screws of 25 mm length. (width upto 500-600 mm only), to be fixed over the existing purlins, rafters, channels and trusses.
7.06
-
5697.28
Design, Supply, Installation and commissioning of 10HP Pump including loading & unloading, installation charges, required Specials/ fittings, Taxes, testing and commissioning etc., complete with all lead & lift as directed by the Engineer incharge
1
-
50000
Supply, Installation and commissioning of STARTR STAR DELTA including loading & unloading, installation charges, required Specials/ fittings, Taxes, testing and commissioning etc., complete with all lead & lift as directed by the Engineer incharge
1
-
8500
Supply, Installation and commissioning of 63 AMS FUSE including loading & unloading, installation charges, required Specials/ fittings, Taxes, testing and commissioning etc., complete with all lead & lift as directed by the Engineer incharge
3
-
1800
Supply, Installation and commissioning of 32 AMS MCB including loading & unloading, installation charges, required Specials/ fittings, Taxes, testing and commissioning etc., complete with all lead & lift as directed by the Engineer incharge
1
-
1100
Supply, Installation and commissioning of MCB COVER including loading & unloading, installation charges, required Specials/ fittings, Taxes, testing and commissioning etc., complete with all lead & lift as directed by the Engineer incharge
1
-
250
Design, Supply, Installation and commissioning of VOLT AMS MITER including loading & unloading, installation charges, required Specials/ fittings, Taxes, testing and commissioning etc., complete with all lead & lift as directed by the Engineer incharge
2
-
3000
Design, Supply, Installation and commissioning of PREVENTER including loading & unloading, installation charges, required Specials/ fittings, Taxes, testing and commissioning etc., complete with all lead & lift as directed by the Engineer incharge
1
-
450
Design, Supply, Installation and commissioning of 6 SQ MM WIRE including loading & unloading, installation charges, required Specials/ fittings, Taxes, testing and commissioning etc., complete with all lead & lift as directed by the Engineer incharge
20
-
4400
Design, Supply, Installation and commissioning of 1 SQ MM WIRE including loading & unloading, installation charges, required Specials/ fittings, Taxes, testing and commissioning etc., complete with all lead & lift as directed by the Engineer incharge
20
-
520
Supply, Installation and commissioning of 4 SQ MM CABLE including loading & unloading, installation charges, required Specials/ fittings, Taxes, testing and commissioning etc., complete with all lead & lift as directed by the Engineer incharge
100
-
16000
Supply, Installation and commissioning of 63 MM HDPE PIPE including loading & unloading, installation charges, required Specials/ fittings, Taxes, testing and commissioning etc., complete with all lead & lift as directed by the Engineer incharge
30
-
4500
Supply, Installation and commissioning of 75 MM HDPE PIPE including loading & unloading, installation charges, required Specials/ fittings, Taxes, testing and commissioning etc., complete with all lead & lift as directed by the Engineer incharge
30
-
7500
Supply, Installation and commissioning of 75 MM N R V including loading & unloading, installation charges, required Specials/ fittings, Taxes, testing and commissioning etc., complete with all lead & lift as directed by the Engineer incharge
1
-
1800
Supply, Installation and commissioning of Electrical Panel Box including loading & unloading, installation charges, required Specials/ fittings, Taxes, testing and commissioning etc., complete with all lead & lift as directed by the Engineer incharge
1
-
4500
Supply of Primary Filter system - conforming to IS 12785:1994 with latest amendments made up of MS/Plastic conveying to work site, including loading & unloading at both destination and jointing true to line etc., complete including installation charges, required Specials/ fittings, Taxes, testing and commissioning etc., complete with all lead & lift, loading & unloading as directed by the Engineer incharge -FILTER 90 M�/HR 3"
1
-
135931
Supply and Installation of Pressure Relief Valve - 3" for safety at Filter station, including loading & unloading at both destination and jointing true to line etc., complete including installation charges, required Specials/ fittings, Taxes, testing and commissioning etc., complete with all lead & lift, loading & unloading as directed by the Engineer incharge
2
-
40008
Supply, installation and testing and commissioning of Butterfly Valve ( 3.0" dia) as per ISO standards before and after Primary Auto Filter.,complete with all leads and lifts as directed by Engineer in- charge.
2
-
10640
Supplying of 3" Water meter, including loading & unloading at both destination and jointing true to line etc., complete including installation charges, required Specials/ fittings, Taxes, testing and commissioning etc., complete with all lead & lift, loading & unloading as directed by the Engineer incharge
1
-
39047
Design, Supply and commissioning of Pressure Transducer with local display of range 0 to 10 Kg/cm2 with 4-20mA output to connect with SCADA system including cost of all materials, labour, loading, unloading etc and with all lead and lifts etc complete.
1
-
7125
Manufacturing, Supplying, laying in position, aligning, jointing, testing and commissioning of electric resistsance welded / submerged arc welded manifold for inlet and outlet of the filters ( 3.0" dia), complete with all leads and lifts as directed by Engineer in-charge.
1
-
31187
Supply, installation and testing and commissioning of Air release valve 1 inch with control valve as per ISO standards one before the filter and one after the Auto filter, complete with all leads and lifts as directed by Engineer in-charge.
5
-
6245
Supplying, fixing and commissioning of 63 mm diameter PVC Control valve & Accessories required for Drip and Sprinkler Irrigation System including installation charges with required specials and fittings etc., complete with all lead and lift, loading & unloading as directed by the Engineer in charge.
8
-
4968
Supplying, fixing and commissioning of 63 mm PVC Sub main Flush Valve & Accessories required for Drip and Sprinkler Irrigation System including installation charges with required specials and fittings etc., complete with all lead and lift, loading & unloading as directed by the Engineer in charge.
10
-
810
Supplying, installation and commissioning of 16 mm Non-Pressure compensated (NPC) Drip line 0.4 m * 1.0 LPH as per ISO Standards, for Demo plot. The rate quoted shall be with all lead and lifts etc. and as directed by the Engineer incharge.
30500
-
427000
Supplying, installation, testing and commissioning of 16 mm Plain lateral as per ISO Standards with all lead and lifts etc. complete. and as directed by the Engineer incharge.
1200
-
15600
Supplying, installation, testing and commissioning of 16 mm Rubber Grommet OD DIA 16 * 12 withall lead and lifts etc complete and as directed by the Engineer incharge.
1200
-
4800
Supplying, installation, testing and commissioning of 16 mm Start Nipple for connecting plain Lateral with all lead and lifts etc complete and as directed by the Engineer incharge.
1200
-
4800
Supplying, installation, testing and commissioning of 16 mm X 17 mm coupling connector for connecting plain Lateral and Drip line. Rates shall be with all lead and lifts etc complete and as directed by the Engineer incharge.
1200
-
4800
Supplying, installation, testing and commissioning of 16 mm X 17 mm end cap with all lead and lifts etc completeand as directed by the Engineer incharge.
1200
-
4800
Supplying, installation, testing and commissioning of 17 mm Connector for connecting drip line with all lead and lifts etc complete and as directed by the Engineer incharge.
200
-
600
Supplying, installation of MS Winder with necessary fittings for LLDPE emitting lateral winding after crooping period for better storage at storage place and as directed by the Engineer incharge
1
-
6175
Supplying, installation of storage stand with necessary fittings for LLDPE emitting lateral storage after cropping period for better storage at Demo plot as directed by the Engineer incharge
1
-
4750
Supplying, installation of LLDPE pipes conforming to IS 12786:1989 with latest amendments and conveying to work site, including loading & unloading at both destination and rolling, laying true to line & jointing of pipes and specials etc., complete. giving hydraulic test as per relevant ISS with all lead and lift including testing and commissioning. including installation charges & required Specials and fittings, Taxes etc., complete with all lead and lift, loading & unloading as directed by the Engineer in charge.- TUBE OD40MM CL2
170
-
21080
Supplying, installation of Plastic sprinkler conforming to IS 12232:Part I & II with flow ange between 440 - 685 LPH and operating pressure of 1.5 Kg/Cm2. Material of construction for sprinkler shall be engineering plastic/delerin (except rubber washers, retraction spring and thrust spring) Plastic material exposed to direct sunlight shall have UV protecion. Sprinkler shall be mounted on MS rod of Dia 5.5 mm onwards & shall have provision to stable support at ground insertion. Riser rod length shall be of 1.50 mtr. MS riser rod shall have anti corrosive paint or coating. Srinkler shall be connected to the lateral tubing using easily detchable male & female adopter. Connection between sprinkler & lateral tubing shall be done using 8mm ID (12mm OD) vinyl tubing. conveying to work site, including loading & unloading at both destination and rolling, laying true to line & jointing of pipes and specials etc., complete. giving hydraulic test as per relevant ISS with all lead and lift including testing and commissioning including installation charges with required Specials and fittings, Taxes etc, complete with all lead and lift, loading & unloading as directed by the Engineer in charge. -SPRINKLER NOZZLE with ASSEMBLY 1/2'' FC
16
-
9888
EARTHWORK: Earthwork excavations for pipe line trenches (except building works) including depositing on bank upto a lead of 30m including danger lighting & using sight rail & boning rods @ every 100 m whenever necessary as directed by the engineer incharge KUWS & DB S.R item no: 1(i)(a), Page no:5, 2008,2009 (0.00m to 2.00m) Excavation for pipe line of different sizes etc complete and as directed by Engineer-in charge
790
-
35550
Refilling pipeline trenches and foundation with selected available earth from trench excavation and f foundation including watering, consolidation in layers of 15cms, thickness including disposing off the surplus earth with all lead and lift.-Note: In exceptional cases, earth may be obtained officer. from borrow pit with extra lead, duly reporting to higher KUWS & DB S.R item no: 1(i)(a), Page no:5 (0.00m to 2.00m) Refilling for pipe line of different sizes viz, PVC PIPE 63MM -04KG/CM2-IND, PVC PIPE 75MM -04KG/CM2-IND, PVC PIPE 110MM -04KG/CM2-IND etc complete and as directed by Engineer-in charge
783
-
46980
Sullply and Laying of PVC PIPE 63MM -04KG/CM2-IND With all necessary fittings and accessories etc complete and as directed by Engineer-in charge
690
-
61906.8
Sullply and Laying of PVC PIPE 75MM -04KG/CM2-IND With all necessary fittings and accessories etc complete and as directed by Engineer-in charge
314
-
39206.04
Sullply and Laying of PVC PIPE 110MM -04KG/CM2-IND With all necessary fittings and accessories etc complete and as directed by Engineer-in charge
462
-
118507.62
Sullply and Laying of KINETIC AIR VALVE 2" AV-010 BSP With all necessary fittings and accessories etc complete and as directed by Engineer-in charge
3
-
11846.43
Sullply and Laying of SAGIV BALL VALVE 2 M*F LONG SAL 200 With all necessary fittings and accessories etc complete and as directed by Engineer-in charge
3
-
8114.19
Design, Supply, Erection and commissioning of Irrigation Controllers along with suitable size of HMI to synchronize the data at Pump House with main control unit including cost of all materials, labour, loading ,unloading etc and with all lead and lifts etc complete and as directed by Engineer-in charge
1
-
444432
Design, Supply and commissioning of necessary Hardware and softwarefor the above system and as directed by Engineer-in charge
1
-
71250
Design, Supply and commissioning of Remote Transfer Unit (RTU) for the control of above Solenoid valves remotely from control room for each Irrigation turn in Demo plot including cost of all materials, labour, loading, unloading etc and with all lead and lifts etc. as directed by Engineer-in charge
1
-
46413
Design, Supply and commissioningof lithium Batteries to operate RTU & Solenoid valves for each Irrigation turn in demo plot including cost of all materials, labour, loading, unloading etc and with all lead and lifts etc complete.
1
-
4701
Design, Supply and commissioningof Solar Panel to charge batteries for each Irrigation turn in demo plot including cost of all materials, labour, loading ,unloading etc and with all lead and lifts etc complete as directed by Engineer-in charge
1
-
8184
Supply and commissioning of COMPUTER WITH PRINTER generally to the following specification- Processor â latest suitable for the irrigation application; with minimum of 1TB HD, 8 GB RAM, 30â screen with laser printer etc. Rates shall include cost of all materials, labour, loading, unloading etc and with all lead and lifts etc as directed by Engineer-in charge
1
-
60000
Design, Supply and commissioning of 100mm Solenoid valves with remote control facility for each Irrigation turn in Demo plot including cost of all materials, labour, loading, unloading etc and with all lead and lifts etc as directed by Engineer-in charge
4
-
88976
Design, Supply and commissioning of protecton MS Box wth lock and key arrangement for every cluster of 100mm Solenoid valves concrete base in Demo Plot including cost of all materials, labour, loading, unloading etc and with all lead and lifts etc as directed by Engineer-in charge
4
-
24700
SCADA System development & RadioNet Hardware charges for Programming and coding as directed by Engineer-in charge
1
-
14250
Operation and maintenance for 5 years drip irrigation system istalled at the rate of (Up toRs .2000/Ac/Year)
5
-
50000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements