Visvesvaraya Technological University Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 1,11,000Document Cost
Refer DocumentsTender Fee
₹ 1,850
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
VTU/2024-25/OW/WORK_INDENT61Tender No
VTU/2024-25/OW/WORK_INDENT61Tender Authority
Visvesvaraya Technological University ViewPurchaser Address
-Website
http://http://vtu.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
code04 - Providing fabrication and insatlation of T9 TABLE of size 2.01x0.99x0.76 high.The entire main table shall be of 19mm THK BWP 710GRADE commercial plywood. The top shall be of 19mm THK BWP 710GRADE commercial plywood with thickness of 38mm for the edge, finished with 4 mm. thk. Veneer of approved shade on top and the edge. All inner sides of table and inner leg space shall be provided with approved shade of 0.8mm thick laminate there shall be a provision of cable manager system with necessary cut-outs in top surface. The working top shall be provided with free standing 10mm thk clear glass with cutout and glass edge shall be diamond polished. The table shall be complete in all respect, fixed in position & installed at site as per the instructions. Veneered surface shall be polished with 2 coats of melamine polish in spray semi matt finish after necessary sanding, finishing and staining. The table shall have necessary grooves & other decorative designs if any, as per drawings. Etc. complete. All exposed ply edges shall be mechanically fixed with 1mm thk. Edge banding tape to match with Veneer/Laminate. The EBCO MAKE key-board set and CPU stand with necessary hardware like hinges, SS handles 100mm ht. with matt finish, Centralized drawer and shutter locks, drawer cahnel set as required etc. including cost of labour, cost of material, lead and lift charges and all other incidental charges etc. Complete as per design drawing. The work shall be carried out as per direction of Engineer in charge of work. T9: Size-2.01x0.99x0.76
Group Discussion Room
4
33510
134040
code05 - Providing fabrication and insatlation of RECEPTION TABLE Size-4.50x0.75x0.90 with working surface as on site. The entire table shall be of 19mm THK BWP 710GRADE commercial plywood. all inner leg space shall be provided with approved shade 0.8mm thick laminate.The top should be of 19mm THK BWP 710GRADE commercial plywood finished with 4mm. thk. venner/ 1mmthk laminate of approved shade on top and the edge. The front face of table finished with Louvered LOUVERED CHARCOAL panel and 4mm thk veneer of approved shade as per drawing. Veneered surface shall be polished with 2 coats of melamine polish in spray semi matt finish after necessary sanding, finishing and staining. The table shall have necessary grooves & other decorative designs if any, as per drawings. Etc. complete. All exposed ply edges shall be mechanically fixed with 1mm thk. Edge banding tape to match with neer/Laminate. The EBCO MAKE key-board set and CPU stand with necessary hardware. including cost of labour, cost of material, lead and lift charges and all other incidental charges etc. Complete as per design drawing. The work shall be carried out as per direction of Engineer in charge of work. Reception Desk:: Size-4.50x0.75x0.90 Placement Office Entrence
1
91950
91950
code06 - Providing fabrication and installation of FULL HEIGHT Reception back STORAGE of size as per mentioned below/ As on site, The entire unit shall be of 19mm THK BWP 710GRADE ply finished 0.8mm thk laminate of approved shade as inner finish.19mm THK BWP 710GRADE ply with 0.8mm laminate for shelves. 25mm THK Block board (pine wood) for openable shutters with 4mm thk veneer of approved shade as an outer finish as per drawing for and 0.8mm laminate for inner face. All exposed ply edges mechanically fixed with 1mm thk. edge banding tape to match with Veneer/Laminate. Veneered surface shall be polished with 2 coats of melamine polish in spray semi matt finish after necessary sanding, finishing and staining. The storage shall have necessary Grooves & other decorative designs if any, as per drawings. Etc. complete Including necessary hardware like hinges, SS handles 300mm ht. with matt finish, locks system, tower bolt and magnet, chain and steel pins to hold the shelves etc. including cost of labour, cost of material, lead and lift charges and all other incidental charges etc. Complete as per detail drawing. The work shall be carried out as per direction of Engineer in charge of work. Back Storage: SF: Size-4.50x0.60x 3.00 ---- The bidder should qualify all the conditions as mentioned in the bid document.
1
259910
259910
code07 - Providing fabrication and installation of FULL HEIGHT STORAGE of size Size- 0.91x0.60x2.4 M as per mentioned below, The entire unit shall be of 19mm THK BWP 710GRADE ply with shutter in 25 mm thk block board all outer surface shall be veneer finished and inner surfaces shall be finished in 0.8mm thk laminate. all inner shelves shall be provided with 19mm ply finished with 0.8mm thk laminate on all sides. All ply edges mechanically fixed with 1mm thk. edge banding tape to match with Veneer/Laminate. Veneered surface shall be polished with 2 coats of melamine polish in spray semi matt finish after necessary sanding, finishing and staining. The storage shall have necessary Grooves & other decorative designs if any, as per drawings. Etc. complete Including necessary hardware like hinges, SS handles 300mm ht. with matt finish, locks system, tower bolt and magnet, chain and steel pins to hold the shelves etc. including cost of labour, cost of material, lead and lift charges and all other incidental charges etc. Complete as per detail drawing. The work shall be carried out as per direction of Engineer in charge of work. Size- 0.91x0.60x2.4 ---- The bidder should qualify all the conditions as mentioned in the bid document.
12.6
29887
376586.154
code08 - Providing, Fabrication and installation of FREE STANDING WALL (0.076 THK) 3” THK WITH VENEER FINISH. The internal box framing of 600X600mm (As per site requirement) grid work, shall be in 19mm double BWP 710GRADE commercial ply of 0.076m wide in horizontal and vertical grid to mount 12mm BWP 710GRADE commercial ply on either side with 0.076mm wide 12mm BWP 710GRADE commercial ply patti with 0.076mm spacing in between. The paneling shall be finished with 4mm thk veneer of approved color. Veneered surface shall be polished with 2 coats of melamine polish in spray semi matt finish after necessary sanding, finishing and staining. The Paneling shall have necessary Grooves & other decorative designs if any, as per drawings. Etc. complete. The necessary cutout shall be provided for electrical and data wires. Including cost of labour, cost of material like fevicol and hardware like expandable fasteners of required size with necessary plastic sleeves and galvanized MS screws which can take safe working load not less than 100kg, lead and lift charges and all other incidental charges etc. Complete. Paneling work shall be coordinated with other item of work to have a complete surface as per design drawing and direction of Engineer in charge of the work. Mode of measurement Length X Height (Height up to False ceiling bottom). -
20.88
9023
188408.592
code09 - Providing, Fabrication and installation of DOOR WITH BOTH SIDE VENEER FINISH: Single/Double leaf shutter of size mentioned in drawing made up of 32mm thk BLOCK BOARD OF ISI Brand as per drawing. Finished with 4mm thk veneer of approved shade on either side. Shutter to be lipped on all sides with 1/2" thick burma wood beading. Veneered surface and beading shall be polished with 2 coats of melamine polish in spray semi matt finish after necessary sanding, finishing and staining. The door shall have necessary grooves & other decorative designs if any, as per drawings. Etc. complete. Including necessary hardware like hinges, SS handles 600mm ht. with matt finish, door closer, door stopper, door locks as required etc. including cost of labour, cost of material, lead and lift charges and all other incidental charges etc. Complete as per design drawing. The work shall be carried out as per direction of Engineer in charge of work.
6.24
15117
94334.5104
code10 - This shall consists of part Fixed glass and part Telescopic Sliding Glass.Providing and fixing full height glass partition with 12 mm clear glass (Saint-Gobain or modiguard) fixed with inter locking glazing profile (stainless steel brush finish) on both top and bottom. Bottom side of the profile should be fixed with floor with necessary ss screws and top side fixed to ceiling and glass supported with false ceiling framing work. The sides of the glass profile will also be supported with appropriate size and design of solid partition and Glass to glass with necessary connectors as indicated in drawing.Providing and fixing 12 mm thick clear toughened glass Sliding door (saint-gobbain or modi guard,) with making holes / cut-outs as required, making edges clear smooth polished, fixed with necessary Telescopic Glass Sliding System (1Fix+2door), Telescopic Glass Sliding System (1Fix+3door), door assembly (pre installed hardware, removable clip on covers, end cap, and rubber 5 gasket or proper grip), Fix Bracket At Bottom of Glass Glass to Glass Lock, glass damage preventing gasket, grub screws finish complete in all respect.The rates should be quoted as a total value for the supply and fixing the glass partition, glass door as a whole) for the quantity indicated complete in all respect as single cost. Glass partition shall be measured for Length and Height upto false ceiling Bottom. Should also be fixed with proper frame work with all beams, soffit and ceiling with necessary brackets and cleats as required, including filling hardwood in the bottom level tube, which shall be connected to the glass partition (glazing profile). at (B).
32.88
15853
521254.5312
code11 - Providing, fixing, testing and comissioning of Director & TPO,s & Meeting Head Chair of featherlite (RCLIHBBC21M06AA21ZZZ R Click HB Chrome Base M06) with leather back, leather seating, adjustable height, wheels,Two way Adjustable arms,nylon base etc., complete including, cost of labour, cost of material, lead and lift charges and all other including charges like transportation etc,. complete as per design drawing. the work shall be carried out as per directions of Architect/engineer in charge of work.
3
21477
64431
code12 - Providing, fixing, testing and comissioning of Staff Room,Workstation, Reception Chair of featherlite (RCPLMBBPL2M02PA31AZ Contact Project MB-New) with Nylon base M02 Synchro Mech, fabric upholstered cushion seat, single lock, syetc, complete including, cost of labour, cost of material, lead and lift charges and all other including charges like transportation etc,. complete as per design drawing. the work shall be carried out as per directions of Architect/engineer in charge of work.
60
15885
953100
code13 - Providing, fixing, testing and comissioning of Officer Chairs of featherlite (RANAHBBPL1M16AA51ZZ Anatom HB) With Anatom HB Nylon Base M16, Upholstery Fabric cushion seat, Upholstery Mesh,Adjustable cushion head Support, seating lock, adjustable P.U arm, Seat Depth Adjustment etc, complete including, cost of labour, cost of material, lead and lift charges and all other including charges like transportation etc,. complete as per design drawing. the work shall be carried out as per directions of Architect/engineer in charge of work.
5
23552
117760
code14 - Providing and supplying of THREE SEATER SOFA for reception of Stanley make, Model Trident with SS legs , Leather- Scandinavian max, with color as per client choice etc complete., Including cost of labour, cost of material, lead and lift charges and all other incidental charges etc, complete as per the design drawing. The work shall be carried out as direction of Engineer in charge of work.
3
35000
105000
code15 - Providing and fixing of VERTICAL LOUVERED BLINDS -D - Touch- Lining series with 100% Translucent, polyester woven with acrylic coating resistant to cracking and fraying. 0.30mm thickness, with higher Tearing strength. The vertical louvered blind shall hang straight and flat without bulking. The entire assembly shall facilitate smooth operation and necessary accessories viz. Head rail, dead weight, links acrylic tilting rod, complete. Including cost of all material, cost of labor, cost of equipment and machinery, scaffolding, all lead and lift, loading and unloading, transportation and all other incidental charges etc, complete as per the design drawing. The work shall be carried out as direction of Engineer in charge of work.
58.8
1500
88200
code16 - Providing and fixing Gypsum false ceiling with drops as per drawing including of providing and fixing G.I. Frame work as per specification of India gypsum at a distance of 2'0" c/c both ways complete with 12.5mm board and all necessaryperimeter channels etc. No extra payment will be made for the cutting of lightpoints , stain glass,cove lighting etc. The measurement will be taken in one level, rate should exclude the drops . The joints to be properly mended with papertapes and gypsum compound all complete. The rate should include the full completion of the ceiling. At the time of handing over the site all necessary repairing work to be considered if required.The ceiling to be completed with 3 or 4 coats of paint of appoved make after plaining all complete.
25
1600
40000
code17 - Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge..
1200
245
294384
code18 - COE Office : Double Side Twin Seater Workstation : Providing fabrication and insatlation of WORKSTATION : With working surface 1.2 x1.2 The emtire table shall be of BWP 710GRADE plywood and Powder Coated Mild Steel Frame with Raceway for Power & Data. The table top shall made of 25mm Sandwich of 19mm THK BWP 710GRADE Plywood + 4mm THK Exterior Grade MDF and 1.5mm THK White Acrylic Sheet. . The inner sides of table top shall be provided with approved shade of 0.8mm thick laminate. The legs of the Bottom frame shall be made using 40mm CR Round Tube powder coated, Table top frame perimeter using 40 X 40 mm L angle powder coated with raceways provisional size of 1.2m x 0.8m x0.8 m with end perforated end plates on either side. The table top shall be provided with a flip to open cable manager system with necessary cut-outs on the top surface. The table shall have necessary grooves & other decorative designs if any, as per drawings. Etc. complete. All exposed ply edges shall be mechanically fixed with 1mm thk. Edge banding tape to match with Acrylic/Laminate and including all necessary hardware including cost of labour, cost of material, lead and lift charges and all other incidental charges etc. Complete as per design drawing. The work shall be carried out as per direction of Engineer in charge of work. . The necessary cutout shall be provided for electrical and data wires. Including cost of labour, cost of material like fevicol and hardware like expandable fasteners of required size with necessary plastic sleeves and galvanized MS screws, lead and lift charges and all other incidental charges etc. complete as per design drawing and direction of Engineer in charge of the work. Size-1.2 x 0.6 x 0.75
9
19010
171091.89
code19 - Providing, fixing, testing and comissioning of Staff Room,Workstation, Reception Chair of featherlite (RCPLMBBPL2M02PA31AZ Contact Project MB-New) with Nylon base M02 Synchro Mech, fabric upholstered cushion seat, single lock, syetc, complete including, cost of labour, cost of material, lead and lift charges and all other including charges like transportation etc,. complete as per design drawing. the work shall be carried out as per directions of Architect/engineer in charge of work.
18
15885
285930
code20 - Supply & Installation of pre fabricated 3 Person Meeting room desk of Size : 6' x 3'6" x 2'6" made of MS powder coated frame with Wooden bench and tabletop. The bottom of the desk is made of 50x25 CR MS tube, All Connecting members are made of 25x25x1.2 thick CR MS tube and Side legs are made of designer MS sheet including a frontal 0.8 mm thick modesty panel with book shelf of 200m depth, All MS members powder coated in approved shade. The Tabletop is made of 18mm Thick commercial plywood finished in 1mm thick laminate of approved shade with 2mm PVC edge banding for all exposed edges.
44
25960
1142240
code21 - Raised platform :Providing and fixing wooden platforms in class room of size 16’x5’. The frame work shall be of Pine wood for the platform shall be made of 3”x2“ pine wood .The top of the platform shall be provided with 18mm thick commercial plywood and covered with 1.5mm thick approved colour vinyle sheet .The front faces of 9” ht above the floor level shall also be covered with 12mm plywood & 1.5mm thick approved vinyl sheet .The wood work shall be painted with synthetic enamel paint. including all hardware and labour charges etc complete
9.75
4900
47775
code22 - Providing and supplying of Podium made of 18mm thick plywood and finished with 1mm thick laminate on both sides as per the design and direction of EIC.
1
10000
10000
code23 - Air-Conditioning works: Supply erection, testing, commissioning of 1.5 TR Split ype air conditioners (5 Star rating) suitable for operation on single AC supply, hermetically sealed compressor with air cooled condenser motor capacitor start, capacitors run relay and overload protection, with one indoor and one outdoor unit. The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube. (High wall chorded/cordless) suitable capacity 3 core sheathed/PVC copper cable and a battery operated wireless remote unit. Make: As approved
3
56265
168797.82
code24 - Supply erection, testing, commissioning of 2.0 TR Split ype air conditioners (5 Star rating) suitable for operation on single AC supply, hermetically sealed compressor with air cooled condenser motor capacitor start, capacitors run relay and overload protection, with one indoor and one outdoor unit. The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube. (High wall chorded/cordless) suitable capacity 3 core sheathed/PVC copper cable and a battery operated wireless remote unit. Make: As approved
2
63776
127553.28
code25 - Supply erection, testing, commissioning of 2 TR Cassette type air conditioners suitable for operation on single/three phase AC supply, hermetically sealed compressor with air cooled condenser motor capacitor start, capacitors run relay and overload protection, one ceiling mounted indoor unit and one outdoor condenser unit including standard accessories covered with insulation tube including battery operated cordless unit. Make: As approved
3
93001
279005.1
code26 - Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. Make: As approved
8
3746
29972
code27 - Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas charging for additional piping length of tube. Make: As approved
80
1934
154721.6
code28 - Extra for Fabrication supply and fixing of Stand fabricated using slotted angle/Langle of size 6mmx50mm for mounting outdoor/indoor A.C. unit/ Batteries. Make: As approved
8
5672
45378.08
code29 - Electrical works:Open conduit System: Supplying heavy gauge PVC conduit pipe of 25mm Dia, 2.0mm thick conforming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/stone structure and rawl plugs in case of brick wall and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. Make: VIP/Avon Plast/BajajPlast
150
95
14337
code30 - Supplying and fixing of 50mm PVC casing and capping on the wall or ceiling using necessary materials likes bends, screws at an interval of 300mm etc as required.
50
50
2537
code31 - Supplying and fixing of 25mm PVC casing and capping on the wall or ceiling using necessary materials likes bends, screws at an interval of 300mm etc as required.
50
41
2065
code32 - Supplying of GI flexible conduit pipe of 25mm Dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawls plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely.
30
84
2548.8
code33 - Wiring for lighting/power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP of GROUP -A. Make: Finolex/Anchor/RR Kabel/Havells a) 2.5 Sqmm
180
49
8920.8
code34 - 4.0 Sqmm Multi Strand copper wire
360
74
26762.4
code35 - 6.0 Sqmm Multi Strand copper wire
360
108
39081.6
code36 - 16.0 Sqmm Multi Strand copper wire
360
375
135086.4
code37 - Supplying and drawing 3C X 2.5 Sq.mm Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100Volts as per IS-694:1990 Make: Anchor/Havells/Polycab
100
133
13334
code38 - Supplying and fixing 4 Way regular vertical distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings onfirming to IS/IEC 60898 - 2. Make: ABB/Legrand/Schneider Electric/Siemens/
1
12188
12188.22
code39 - Supplying and fixing 3 pole 100 amps Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. Make: ABB/Legrand/Schneider Electric/Siemens/
1
7181
7181.48
code40 - Supplying & fixing 32 amps TP 4 pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. Make: ABB/Legrand/Schneider Electric/Siemens/
2
2026
4052.12
code41 - Supplying & fixing 20 amps single pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. Make: ABB/Legrand/Schneider Electric/Siemens/
6
489
2938.2
code42 - Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 Make: Unistar/Havells/KEI/Ploycab a) 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)
150
211
31677
code43 - Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. ( 4 Core 16 Sqmm 6 Sqmm to 16 Sqmm
150
36
5509.5
code44 - Supplying of Heavy Duty Copper Terminal Long Barrel for Aluminum Conductor Compression type Aluminium Tubular in Line Connector for Aluminum Conductor. 4 Core 50 Sqmm
16
68
1095.04
code45 - Audio Visual works: Supplying of projector with follwing specifications Brightness 4000 ANSI Lumens, Native Resolution XGA (1024 x 768), Native Resolution XGA (1024 x 768) Brightness 4000 ANSI Lumens, Contrast Ratio 20,000:1, Max. Supported Resolution WUXGA (1920 x1200) @60Hz, Native Aspect Ratio 4:3, Lamp Life and Type 5,500 / 7,000 / 10,000 Hours (Normal / Eco. / Dynamic Eco. Mode), 210W, Display Type Single chip DLP Technology by Texas Instruments, Chip Size 0.55” DMD, Throw Ratio 1.94 - 2.33 : 1, Image Size (Diagonal) 40" - 300", Projection Distance 1.6 - 12.2 m, Projection Lens F = 2.42 - 2.62, f = 22.5 - 25.79 mm, Zoom Ratio 1.2x, Offset 106%, Keystone Correction Vertical: +/-40 degree, Speakers 2W, I/O Connection Ports VGA-In (15pin D-Sub) (x2), HDMI Number of Ports (x2), S-Video, Composite Video, Audio-In (Mini-Jack), VGA-Out (15pin D-Sub), Audio-Out (Mini-Jack), RS-232, USB miniB (Service), Noise Level 29dB Eco. Mode, 3D Ready(DLP link, PC+Video) Yes, should have Standard Accessories VGA Cable, User Manual (CD), Quick Start Guide, Warranty Card (by region), Remote Controller (with battery), AC Power Cord. Warranty of the above projector is 2 years projector / 1 year on lamp or 1.000 hours whichever comes first. Make: Delta Vivitek/Infocus/Hitachi/Sony/
1
60416
60416
code46 - Supplying and fixing heavy duty Projector Ceiling Mount Kit (2 Feet, Black) Universal Projector Mount Loading Capacity Upto 25 Kgs. Make: As approved by the engineer-in-charge
1
7080
7080
code47 - Supplying and fixing of matte finish pull down projector screen of size 8 x 6 feet with supported display reolsution supporting 1080p. Make: As approved by the engineer-in-charge
1
21830
21830
code48 - Supplying of moulded VGA cable of 15 Mtrs lenght.
2
5430
10860.72
code49 - Supplying of moulded HDMI cable of 15 Mtrs lenght.
2
5012
10025.28
code50 - Supplying, installing, testing and commissioning of AI Based 4K UHD 86 inch Touch Display IPS Ultra HD Display 3840*2160 @60Hz,LED View Anglewide viewing angle of 178 degree(H) / 178 degree(V) ,1.8 GHz, Quad Core,Android CPU (4GB RAM + 32 GB on board storage,Advance touch Technology with Infrared Surface Lightwave Technology,20 Simultaneous touch points,Response Time 3 ms (typ.) +OPS with Intel Core i5- 9th Gen or Above, 8GB (Configurable) RAM,Storage of 256 GB SSD,Dual Band 2.4 GHz & 5 GHz connectivity. Make: Cybernetyx or As approved by the Engineer-in-charge
1
403796
403796
code51 - Supplying of Wireless access point nternal Omni: 5 GHz: 4 5 dBi, 2.4 GHz: 2 4 dBi. Make: TP Link/D-Link/
3
9448
28344.78
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements