Visvesvaraya Technological University Tender

code04 - Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with waterabsorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quicksettile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x1200 mm

code05 - Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6,25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, including cost of materials, labour, curing, polishing complete as per specifications.

code06 - Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarsesand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing,curing and polishing etc. all complete as specified and as directedbythe Engineer-in-Charge. **Polished Granite stone slab Black, Cat Eye, River Pink or equivalent.

code07 - Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking materialto the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles 10mm to 25mm

code08 - Painting wood work with Deluxe Multi Surface Paint of requiredshade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75L/10m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt andforeignmatter,sandpaperingandknotting,costofmaterials,labour complete as per specification sand as per directions of Engineer-in-charge

code09 - Providing and fixing chromium plated brass curtain rod with ISI mark having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P.brass screws and PVC sleeves etc.,wherever necessary complete. 25 mm dia

code10 - Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineerin charge

code11 - Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, includinga coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings(up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafter sand trusses andi ncluding cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63mm thick with zinccoating not less than 275g/m² .

code12 - Providing20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includingcostof materials ,labour, curing complete as per specifications and as perdirec- tions of Engineer-in-charge.

code13 - Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer,overtheplastered wallsurfaceto prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.charge

code14 - Painting with Silicon & Acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: Two coats with paint of approved quality to give an even shade,after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matte rincluding preparingthesurfaceevenandsand papersmooth,costofmaterials,labourcompleteasperspecificationsand as per directions of Engineer-in-charge.

code15 - Providing and laying waterproofing treatment to the Roof with PUbased single component elastomeric pure polyurethanebased coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa- ter proofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412.The water proofing membrane to be applied in 2coats @1.6kg/m2toachieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @ 150g/m2 and protection with 120gsmGeo-textileoverthewa- ter proofing membrane.Thefinishedcosttoincludesurfacepreparation, making covingatJunction, Bore Packing, treatment of constructionjoints completely as per specification.

code16 - Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking materialto the appropriate disposal area as per direction of Engineer-in-charge. Forthicknessoftiles10mmto25mm

code17 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming toIS:15622ofapprovedmakeincolourssuchasWhite,Ivory,Grey,Fume Red Brown, laidon20 mm thick cement mortar1:4(1Cement:4Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.

code18 - Providing and fixing flush door shutter made out of solid core block board type,well seasoned,chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doorshutters coveredwithcrossbondedwoodensheets(coreveneer)hotpressed and fastened on both sides of the door useingliquid phenol formaldehyde resinasperIS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do-35mmthickbothside commercial

code19 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixinginpositionandapplying a priming coat of approved steel primer, including welding and bolted with special shaped washer setc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as perdirections of the Engineer-in-Charge.

code20 - Providing & fixing 10mm thick plaster of Paris (gypsumanhydrous) ceiling up to a height of 5m above floor level, over first class kail woodstrips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame.Flatsurfaces

code21 - Providing and supplying and fxing of wall monted viterious china pedestal type of water closet (European type W.C.pan) with seat and lid, 10litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the wall sand floors wherever required : W.C.pan with ISImarked black solid plastic seat and lid

code22 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the sameincludingtestingofjointscompleteasperdirectionofEngineerin Charge. Concealed work, including cutting chases and making good the walls etc 25mmnominaldia pipes.

code23 - Providing and fixing of Brass Flush Valve 40 mm Round including all fitting complete as per the direction of engineer incharge of work.

code24 - Providing and supplying of Black Anti Skid Hole Rubber Mat (Interlocking Type), Thickness 22mm, Mat size, 1mx1.5m

code25 - Demolishing brick work manually /by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. Incemen tmortar

code26 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth,rust free,straight,mitredandjointed mechanically wherever required including cleatangle,Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge.(Glazing ,paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/pivot sand making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) including cost of materials, labour, usage charges of machinery complete as per specifications.

code27 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item):Withfloatglass panes of8 mmthickness(weightnotlessthan20 kg/m²)including cost of materials, labour, usagechargesofmachinery complete as per specifications.