Visvesvaraya Technological University Tender

code 12 - Providing and fixing in position brass gate valve with C I wheel / ball valve of approved quality (Screwed end) 32mm dia nominal bore including cost of materials, labour, and HOM of equipments with all leads complete as per specification. a. 32mm dia Make : Jaquar/ Hindware

code 29 - Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge including high quality cloth for outer side curtain and stitch in American style . including cost of materials, labours,taxes, lead and lift, stiching, accessories and all other incidental charges etc. complete as per directions of Engineer in charge of work

code 32 - Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand bo xes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge

code 06 - Providing and fixing in position brass bib cock two in one type of approved quality 15mm nominal bore rate includes cost of materials, labour, and conveyance to spot etc complete as per specifications. Make : Jaquar/ Hindware

code 10 - Providing and fixing in position brass bib cock of approved quality 15mm nominal bore rate includes cost of materials, labour, and conveyance to spot etc complete as per specifications.

code 28 - Providing & placing plastic chair as per design including cost of materials, labours, lead and lift, hardware, accessories and all other incidental charges etc. complete as per drawings and directions of architect / EIC. as per suggested make Nilkamal/Cello or its equivalent etc complete to the satisfaction of Architect/ Engineer in charge of work.

code 05 - Providing and fixing SSS- Racold health Faucet, Hand faucet, Hand jet complete set (Tube+Hook+Faucet) to water closet including fixing ,cost of materials, labour, curing complete as per specifications. Make : Jaquar/ Hindware

code 21 - Providing and fixing Mat infront of toilets & bathrooms including fixing ,cost of materials, labour, curing complete as per specifications

code 04 - Providing and fixing plastic seat with approved 1st quality and make conforming to ISI specification, double flapped and fixing to english water closet with all fittings rate includes cost of materials, labour, and conveyance to spot etc complete as per specifications. Make : Jaquar/ Hindware

code 14 - Providing and fixing 50mm outer dia 63mm MTA (Male Thread Adapter) including fixing ,cost of materials, labour, curing complete as per specifications.

code 01 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. External work 50mm dia Make : Supreme/Finolex

code 26 - Providing and fixing self supported ribbed, high quality, high grade (D:350MPA Yst Min). Pre painted Galvalume steel roof sheet, coated with bare Galvalume coating AZ 150, @ 150gms/Smtr 55% AL, 45%ZN) by hot dip process, of total coated thickness as specified for differant spans with a tolerance of +/-0.02mm, according to techanical specification confirming to A 792, with NCCA II-1, or ECCA T4 Pencil hardness HB, NCCA standard T-Bend test. The roof should be fstened to the gutter beam, on the external sloping side, at an interval of 51mm C/C to a depth of 65 mm with GI anchor bolts and neoprene washers & subjecting the gutter beam to Schmidt. Hammer test to ensure the anchorage of the anchor bolts. The self supported roofing system should be designed to with stand the wind load (As per IS 875 Part-3) & earthquake load (as per IS 1893) & the design should also comply with any other techanical requirements such as turbo ventilators of 0.60mtrs dia & skylights of size 4.26x060mtrs fixed one in each row at 10.00mtrs C/C along the length & hangers for electrical fixtures as per requirements including cost of all materials & labours for erection, all lead, lift, loading & unloading, HOM of machineries etc. complete as per the standared detailed techanical specification, design and directions of the engineer in charge of the work.

code 08 - Providing and fixing in position 1500X450 mm dia rectangular shape mirror with plastic moulded frame of approved quality and shade with 6mm thick hard board backing rate includes cost of materials, labour, and conveyance to spot etc complete as per specifications. Make : Jaquar/ Hindware

code 31 - Providing and fixing brass /SS curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc.wherever necessary including fixing in position of approved make and SS finish set of rod and bracket, cost of materials, labours,taxes, lead and lift, hardware, accessories and all other incidental charges etc. complete as per directions of Engineer in charge of work

code 25 - Providing and fixing factory finished custom designed structurally stable, corrosion resistant, cold formed wall structure, trusses, joists, purlins,connection accessories etc. made out of 0.95 mm thick galvanized steel coils (AZ-150gms, Aluminium-Zink alloy coated steel) having minimum yield strength of 550 Mpa, using computerized cold forming machine to 'C' type sections having a mininum web thickness of 89mm, flange width 40mm with 10mm lip as per drawings conforming to AISI specifications and IBC 2009 for cold formed steel and construction confirming to Indian standard as per IS 800-1984 IS 801-1975 IS 875-1987 (Part III) and IS 1893 the LGS frames shall be manufactured using computerised machine duly punched with dimple, service holes and slots at required location and supplied in assembled state using self tapping screws with corrossion resistant coating in accordance with ASTM B633 of specified pitch as per requirements or in a dismantled state and mounted / firmly fixed to the existing plinth beam using self expandable carbon steel anchor bolts, 12 mm dia and 121 mm in length conforming to AISI 304 ( 306 standards @ 500 mm c/c with a minimum embedment of 100mm in RCC located at 300 mm from corners or from bottom LGS frames confirming to RV-TIFAC composite Designs and specifications including all cost of labour, materials, fabrication, assembling, transportation, erection, incidental and unforeseen charges complete as per the directions of the engineer in charge of the work of Size SHS 75mm X 75 mm X 4 mm

code 27 - Taking out existing wooden door shutter and aluminum windows repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges, Tor bolt, Handles, Aldrop with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

code 33 - Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with Decorative veneer facings of approved manufacture

code 20 - Providing and fixing 150mm SS square Jali / Trap over Nahani trap including fixing ,cost of materials, labour, curing complete as per specifications.

code 13 - Providing and fixing in position brass angle /stop cock of approved quality 15mm nominal bore rate includes cost of materials, labour, and conveyance to spot etc complete as per specifications. Make : Jaquar/ Hindware

code 16 - Providing and fixing 50mm FTA (Female Thread Adapter) including fixing ,cost of materials, labour, curing complete as per specifications.

code 15 - Providing and fixing GI Nipple 0.45m long including fixing ,cost of materials, labour, curing complete as per specifications.

code 03 - Providing and fixing unplasticised PVC connection pipe with brass angle cock 15 mm nominal bore 450 mm dia length of PVC connection including fixing ,cost of materials, labour, curing complete as per specifications. Make : Jaquar/ Hindware

code 18 - Supplying PVC ring tite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Etc. complete as per specification and direction of EIC PVC pipes 110mm dia., 6 kg/sqcm Make Finolex/Supreme

code 30 - Providing & placing Ergonomica Classic Mesh High Back Black Executive Revolving Value for Money Office Chair with Chrome Base as per design including cost of materials, labours, lead and lift, hardware, accessories and all other incidental charges etc. complete as per drawings and directions of architect / EIC. as per suggested make Nilkamal/Cello or its equivalent etc complete to the satisfaction of Architect/ Engineer in charge of work.

code 02 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. External work 40mm dia, Make : Supreme/Finolex

code 19 - Supplying PVC ring tite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Etc. complete as per specification and direction of EIC PVC pipes 90mm dia., 6 kg/sqcm Make Finolex/Supreme

code 07 - Making holes in concrete/masonry for sanitary & water supple pipes and same may be redoing with concrete and in CM 1:4 finished surface rate includes cost of materials, labour, curing and conveyance to spot etc complete as per specifications. Make : Jaquar/ Hindware

code 11 - Providing and fixing in position brass gate valve with C I wheel / ball valve of approved quality (Screwed end) 40mm & 32mm dia nominal bore including cost of materials, labour, and HOM of equipments with all leads complete as per specification. a. 40mm dia Make : Jaquar/ Hindware

code 17 - Providing and fixing GI Nipple of 0.60mt long including fixing ,cost of materials, labour, curing complete as per specifications.

code 23 - Providing and fixing factory made 100% carpenter friendly ready to use single solid plain wood polymer composit flush shutter of 30mm thick which is anti termite and having high water absorpation property. The cost includes cost of materials, transportation, labour and fixing charges. etc. complete as manufactures specification and direction of Engineer in charge, fixed to frames with 3 Nos of 75mm Aluminium /stainless steel hinges. Aldrop, handle & Torbolt