Visvesvaraya Technological University Tender

code 04 - Providing and fixing brass /SS curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc.wherever necessary including fixing in position of approved make and SS finish set of rod and bracket, cost of materials, labours,taxes, lead and lift, hardware, accessories and all other incidental charges etc. complete as per directions of Engineer in charge of work

code 05 - Providing and fixing Aluminium window Handles and closer heavy duty mounting including cost & convence of all materials etc complete as per direction of Engineer incharge of work. a. Aluminium window Handles 100mm long & 15mm width

code 06 - Providing and fixingAluminium window closure heavu duty mounting including cost & convence of all materials etc complete as per direction of Engineer incharge of work.

code 07 - Providing, fabricating, assembling and fixing in position aluminimum partitions using aluminium sections of mat funish or glossy finish in combination of plain grove, single grove and double grove as per requirements for the frames of overall size 101.6X44.45mm thickness 3.18mm, section weight 2.40 kg/m, single grove section 2.541 kg/m, and double grove section 2.683 kg/m; aluminium loures of size 77.6mmx27.6mm 1.7mm thick section weight 0.483kg/m; bottom portion provided with 12mm thick pre-laminated sheet both side of approved colour lamination exterior grade; aluminium sections of mat finish or glossy finish using sections, spacing of vertical member shall not exceed 0.60m C/C sections are cut to the required lengths, joints mitered and corners grinded, subdividing frames tennoned and riveted to the frames, the assemble frames should be stiffened with corner angle stripped and fixed with screws, rawl plugs or teakwood gutties to R.C.C columns or masonry on sides. beams and flooring in bottom. including cutting, chistling and making good with cement mortar to match the surface, providing and fixing bottom panel fitted with the materials to a height of 0.90m. from floor level; and 5.5mm thick plain glass for middle portion viz., 0.9m to 2.13m and top panel with lower sections, the glass and panels fitted with glaxin clips of 19mmx17.3mm with thickness of 0.90mm weight 0.124kg/m; aluminium sections pre-treated for removal of any rust and prevention of further rust formation and coated with greasy materials for non-adherence of mortars or any other sticky materials: vertical members embedded in the flooring by making suitable size holes and fixing with cement mortar, with necessary openings for fixing of doors of standard size (excluding cost of door opening) All the frames throughly cleaned free from rust, scale, or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specification, using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality.

code 08 - Providing, fabricating, assembling and fixing in position aluminimum doors using following aluminium mat funish or glossy finish, outer frame plain section 101.6X44.45mm thickness 3.18mm, section weight 2.404 kg/m, door shutters vertical section 44.62X44.45mm thickness 3.18mm, section weight 1.505kg/m, top section 47.62X44.45 thickness 3.00mm , section weight 1.426kg/m,bottom section 114.3X44.45 thickness 3.18mm , section weight 2.646kg/m,door central section 49.91X44.45 thickness 3.00mm , section weight 1.495kg/m, glazing clips 19.91X17.3X11mm thickness 0.9mm , weight 0.124kg/m, aluminium sections cut to lenght joint mentred corners grinded, the shutter pioted opening arrangement with heavy duty aluminium alloy automatic door closures floor mounted, providing and fixing standard approved accessories, such as alumimium handle for full width or length, tower bolts, locks, pivots: PVC or rubber gasket with 5.5 thick plain glass for top and bottom panel: aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherance of motars or any other sticky materials; the assembled frame fitted with the corner angels, strips and fitted with screws, rawl plugs or teakwood gutties to R.C.C columns or masonry on sides. beams and flooring in bottom. including cutting, chistling and making good with cement mortar to match the surface; all the frames throughly cleaned free from rust, scale, or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specification. .using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality etc complete as per direction of Engineer in charge of work.

code 09 - Providing and fixing factory made 100% carpenter friendly ready to use single solid plain wood polymer composit flush shutter of 30mm thick which is anti termite and having high water absorpation property. The cost includes cost of materials, transportation, labour and fixing charges. etc. complete as manufactures specification and direction of Engineer in charge, fixed to frames with 3 Nos of 75mm Aluminium hinges. Aldrop, handle & Torbolt etc complete as per direction of Engineer in charge of work.