Visvesvaraya Technological University Tender

code04 - For Ground & Floor Beams,Lintels : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

code05 - Form Work for RCC Beams,Lintels @60% : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

code06 - Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings

code07 - Providing and fixing M.S.grills of required pattern in frames of windows etc.with M.S.flats, square or roundbars etc.including priming coat with approved steel primer all complete.Fixed to steel windows by welding

code08 - Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar1:6,25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab,including cost of materials ,labour,curing, polishing complete as per specifications.

code09 - Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc.all complete as specified and as directed bythe Engineer-in-Charge. Polished Granite stone slab Black,CatEye,Rive rPink or equivalent.

code10 - Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours,shades except burgundy,bottle green,black of anysize as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete.

code11 - Providing Brick work with common burnt clayNon Modularbricks of classdesignation3.5insuperstructureaboveplinthlevelinallshapesand sizes in Cement mortar 1:4 (1 cement : 4 coarse sand)including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.

code12 - Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,including cost of materials,labour,curing complete as per specifications and as per directions of Engineer-in-charge.

code13 - Applying one coat of water thinnable cement primer of approved brand andmanufactureonwallsurface:Waterthinnablecementprimertogive an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

code14 - Painting with Silicon & Acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: Two coats with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drop sand foreign matter including preparing the surface even and sand paper smooth,cost of materials,labour complete as per specification sand as per directions of Engineer-in-charge.

code15 - Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wallsurfaceto prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.

code16 - Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves(excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.

code17 - Providing and fixing flush door shutter made out of solid core block board type,well seasoned,chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (coreveneer)hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do-30mmthickbothside commercial

code18 - Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc.complete.

code19 - Providing and fixing chromium plated brass handles of 100/125mm with necessary screws etc.complete.

code20 - Providing and fixing bright finished brass butt hinges with necessary screws etc.complete:125x85x5.5mm(heavytype)

code21 - Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 200x10mm

code22 - Providing&fixingof2-trackx2-panelslidingwindowsmadeoutofmulti chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(TitaniumDioxide)at6PHRwithTPE(ThermoPlasticElastomer)and leadfree,gaskets-greycolourhavingisolateddrainageandreinforcedwith Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm X 58mm with GI reinforcementof1mmfortheframeand1.5mmforthesash.Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24mm. Windows shall be provided with 5mmplain float glass,standard hardware&single pointlockingsystemwithtouchlock.Wallthicknessofframe&sashshall be of 2-2.5 mm. Maximum possible size - 1819mm x 1819mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made))

code23 - Providing and fixing unplasticised PVC connection pipe with brass unions: 45 cmlength 20 mm nominal bore

code24 - Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25mm nominal bore

code25 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as perdirection of Engineering Charge. Concealed work, including cutting chases and making good the walls etc.25mmnominaldia pipes

code26 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement,trenching,refilling&testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia Pipes

code27 - Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, withfittings, standard size C.P. brass flush pipe, spreaders with unions andclamps(allinC.P.brass)withwastefittingasperIS:2556,C.I.trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Singlehalfstallurinalwith5litreP.V.C.automaticflushingcistern

code28 - Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass singleholebasinmixerofapprovedqualityandmake,includingpainting of fittings and brackets, cutting and making good the walls wherever required:using White Vitreous China Washbasin size550x400 mm with a 15 mm CP Brass single hole basin mixer

code29 - Providingand fixing CP Brass 32mmsize BottleTrap of approved quality &make and as per the direction of Engineer-in-charge.

code30 - Providingandfixing600x450mmbevelededge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

code31 - ProvidingandfixingPillarCockmadeofStainlesssteelwithallconcealed fitting arrangements & all necessary accesories complete - Class (

code32 - ProvidingandfixingPVC(S.W.R)MultiFloorTrap10.0cmX7.5cmX5.0 cm X 4.0 cm with allfitting arrangements & all necessary accessories complete

code33 - RepairstoexistingAluminiumpartition,refixingandrelocatingincluding cost of material,labour, complete as per specifications.

code34 - Providing and placing on terrace (at all floor levels) polyethylenewater storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

code35 - Providingandlayingcinderconcreteincement1:15(1cement:15cinderof12.5mmnominalgauge)onterracedrooforsunkenslabs,laidtoslope compacting,including cost of materials, labour, curing complete as per specifications.

code36 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth,rust free,straight,mitredandjointed mechanically wherever required including cleatangle,Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge.(Glazing ,paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/pivot sand making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) including cost of materials, labour, usage charges of machinery complete as per specifications.

code37 - Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming toIS:12823 Gradel Typell,in panelling fixed in aluminum doors,windows shutters and partition frames with C.P.brass/stainless steel screws etc.complete as per architectural drawings and directions of engineer- in-charge: Pre-laminated particle board with decorative lamination on both sides including cost of materials,labour,usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

code38 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc.with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m square)including cost of materials, labour, usage charges of machinery complete as per specifications.