Visvesvaraya Technological University Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 1,19,000Document Cost
Refer DocumentsTender Fee
₹ 1,980
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
VTU/2024-25/BD/WORK_INDENT59Bid Award Id
ViewTender No
VTU/2024-25/BD/WORK_INDENT59Tender Authority
Visvesvaraya Technological University ViewPurchaser Address
-Website
http://http://vtu.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
code04 - Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.
7
2060
14423.22
... More
code05 - Dismantling doors, windows and clerestory windows (steelorwood) shut- ter including chowkhats, architrave, holdfasts etc.complete and stacking to the appropriate disposal area as per direction of Engineer-in-charge. Of area beyond 3m square
12
324
3895.44
... More
code06 - Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge.
2
680
1360.42
... More
code07 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m
190
126
24012.2
... More
code08 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata.
65
324
21100.3
... More
code09 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
168
329
55367.76
... More
code10 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates
24
7420
178088.88
... More
code11 - Providing and constructing laterite size stone masonry in CM 1:6 using available Laterite Stone including cost and conveyance of materials (except Laterite), curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5N/mm2 for saturated dry samples-For Basement in CM1:6.
87
4493
390964.95
... More
code12 - For Footings :Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
12.2
7850
95773.66
... More
code13 - Form Work for Footings @3% :Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
12.2
235
2873.222
... More
code14 - For Columns : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
4.7
7850
36896.41
... More
code15 - Form Work for Columns @70% : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
4.7
5495
25827.487
... More
code16 - For Ground & Floor Beams,Lintels : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
16.8
7850
131885.04
... More
code17 - Form Work for RCC Beams,Lintels @60% : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
16.8
4710
79131.024
... More
code18 - For Slab : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
17
7850
133455.1
... More
code19 - Form Work for RCC Roof Slab @50% : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
17
3925
66727.55
... More
code20 - For Chajja & Coaping : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
7.5
7850
58877.25
... More
code21 - Form Work For Chajja, canopy @45% : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
7.5
3532
26494.8
... More
code22 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
32.2
7789
250824.798
... More
code23 - Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings
7.04
110837
780294.0288
... More
code24 - Providing and fixing M.S.grills of required pattern in frames of windows etc.with M.S.flats, square or roundbars etc.including priming coat with approved steel primer all complete.Fixed to steel windows by welding
705
208
146745.75
... More
code25 - Providingandfixing Steel work welded in built up sections/ framed work,includingcutting,hoisting,fixinginpositionandapplyingapriming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksincluding cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge.
1882
168
317117
... More
code26 - Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugationas approved by Engineer-in-charge)0.50mm(+ 0.05%) total coated thickness with zinc oating 120g/m2 a s per IS:277, in 240 m pa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as esired by Engineer- in-charge.Thesheetshallbefixedusingselfdrilling/selftappingscrewsof size(5.5x55mm)withEPDMseal,completeuptoanypitchinhorizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
136
703
95710
... More
code27 - Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar1:6,25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab,including cost of materials ,labour,curing, polishing complete as per specifications.
25.1
2044
51313.185
... More
code28 - Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc.all complete as specified and as directed bythe Engineer-in-Charge.
**Polished Granite stone slab Black,CatEye,Rive rPink or equivalent.
11
3533
38869.93
... More
code29 - Flooring with 25mm thick polished tandur blue stone slabs using cement mortar1:6,25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, ,including cost of materials ,labour,curing, polishing complete as per specifications.
206
1914
394337.56
... More
code30 - Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick settile adhesive (water based)conforming to IS:15477, in average 6mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). .Size of Tile 800x800 mm
101
1828
184704.76
... More
code31 - Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours,shades except burgundy,bottle green,black of anysize as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete.
130
1370
178142.9
... More
code32 - Providing Brick work with common burnt clayNon Modularbricks of classdesignation3.5insuperstructureaboveplinthlevelinallshapesand sizes in Cement mortar 1:4 (1 cement : 4 coarse sand)including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.
83.5
10173
849481.405
... More
code33 - Providing Half brick masonry with common burnt clay Non Modular bricksofclassdesignation3.5insuperstructureaboveplinthlevelup to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand)including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.
49
1313
64353.66
... More
code34 - Providing12 mm cement plasterwith cement mortar 1:6 (1 cement:6 fine sand)including rounding off corners wherever required smooth rendering,providingandremovingscaffolding,includingcostofmaterials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
278
298
83010.8
... More
code35 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement:5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonryincluding rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour,curing complete as per specifications and as per directions of Engineer-in-charge.
618
459
284076.06
... More
code36 - Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,including cost of materials,labour,curing complete as per specifications and as per directions of Engineer-in-charge.
568
432
245608.88
... More
code37 - Finishing walls with Acrylic Smooth exterior paint of required shade: New work(Two coat applied @1.67L/10m square over and including priming coat of exterior primer applied @2.20kg/10m square) with paint of approved quality to give an evenshade,after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
600
215
129354
... More
code38 - Applying one coat of water thinnable cement primer of approved brand andmanufactureonwallsurface:Waterthinnablecementprimertogive an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
1500
65
98505
... More
code39 - Painting with Silicon & Acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: Two coats with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drop sand foreign matter including preparing the surface even and sand paper smooth,cost of materials,labour complete as per specification sand as per directions of Engineer-in-charge.
1500
245
367980
... More
code40 - Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wallsurfaceto prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.
1068
123
132325.2
... More
code41 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two coats on new work over an undercoat of suitableshade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
90
206
18621.9
... More
code42 - Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves(excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.
0.5
122431
61215.895
... More
code43 - Providing and fixing flush door shutter made out of solid core block board type,well seasoned,chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (coreveneer)hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do-30mmthickbothside commercial
18.5
3723
68879.2
... More
code44 - Providing and fixing chromium plated brass night latch of approved quality
including necessary screws etc.complete.
10
1226
12266.1
... More
code45 - Providing and fixing door latch with necessary screws etc complete.Bright finished brass latch .
10
353
3531.2
... More
code46 - Providing and fixing chromium plated brass handles of 100/125mm with
necessary screws etc.complete.
20
293
5872.8
... More
code47 - Providing and fixing bright finished brass butt hinges with necessary screws
etc.complete:125x85x5.5mm(heavytype)
30
340
10221.9
... More
code48 - Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete: 200x10mm
10
433
4336.5
... More
code49 - Providing & fixing of louvered ventilator made out of multi chambered UPVC(MatchingtoRAL-9016)sectionsandwithminimumTiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead freewith gaskets -grey colour having isolated drainage and reinforced with GalvanizedIronprofilethrough-outtheventilatorframe.Theframehaving overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)
5
7085
35429.2
... More
code50 - Providing & fixing of 2.5 track x 2-panel sliding windows madeout of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (ThermoPlasticElastomer)and leadfree,gaskets-grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5 mm thickness.CoextrudedGlazing bead for fixing of glass shall be of size 21.5mm x 9.5mm. Windows shall be provided with 5 mm plain float glass,standard hardware &singlepoint locking system with touch lock. Wall thickness of frame & sash shall beof 1.8-2.0mm. Maximum possible size - 1519mm x 1519mm (The cost is inclusiveofallfixturesandseparatechargesforminorT&P'sshallnotbe made)
18
8116
146100.42
... More
code51 - Providing and fixing unplasticised PVC connection pipe with brass unions: 45 cmlength 20 mm nominal bore
20
136
2725.8
... More
code52 - Providing and fixing C.P.brass bib cock of approved quality conforming to IS:8931
10
786
7867.7
... More
code53 - Providing and fixing C.P.brass long nose bib cock of approved quality conforming to IS standard sand weighing not less than 810g.
10
1048
10481.9
... More
code54 - Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
15
768
11522.7
... More
code55 - Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25mm nominal bore
5
411
2056.75
... More
code56 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as perdirection of Engineering Charge. Concealed work, including cutting chases and making good the walls etc.25mmnominaldia pipes
100
591
59100
... More
code57 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement,trenching,refilling&testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia Pipes
120
591
70920
... More
code58 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement,trenching,refilling&testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal dia Pipes
100
460
46091
... More
code59 - Providing and fixing Unplasticised PolyvinylChloride (uPVC) pipes,for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 100 mm nominaldia Pipes
100
1152
115227
... More
code60 - Providing and fixing Unplasticised PolyvinylChloride (uPVC) pipes,for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 150 mm nominal dia Pipes
150
1973
296059.5
... More
code61 - Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions,totalweightofcoverwithframetobenotlessthan38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with1:1.5:3mix (1cement:1.5fine sand:3gradedstoneaggregate20 mmnominalsize),foundation concrete1:5:10(1cement:5finesand
: 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on wall sand bed concrete etc. complete as per standard design:Inside dimensions 455x610 mm and 45cm deep for single pipeline:Withcommon burnt clay(non modular) bricks of class designation 3.5
12
6990
83885.28
... More
code62 - Extra for depth beyond 45cm of brick masonry chamber: For 455x610 mm size With common burnt clay(non modular) bricks of class designation 3.5
8
7981
63853.12
... More
code63 - Providing and fixing white vitreous china pedestal type water closet (Europeantype)withseatandlid,10litrelowlevelwhitevitreouschina flushingcistern&C.P.flushbendwithfittings&C.I.brackets,40mmflush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting offittingsandbrackets,cuttingandmakinggoodthewallsand floors wherever required W.C.panwithISImarkedwhitesolidplasticseatandlid
4
7405
29622
... More
code64 - Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass singleholebasinmixerofapprovedqualityandmake,includingpainting of fittings and brackets, cutting and making good the walls wherever required:using White Vitreous China Washbasin size550x400 mm with a 15 mm CP Brass single hole basin mixer
7
5105
35741.44
... More
code65 - ProvidingandfixingStainlessSteelAISI304(18/8)kitchensinkasper IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040mm bowl depth 250 mm
1
6960
6960.7
... More
code66 - ProvidingandfixingPVC(S.W.R)MultiFloorTrap10.0cmX7.5cmX5.0 cm X 4.0 cm with allfitting arrangements & all necessary accessories complete
10
302
3023.2
... More
code67 - Providingand fixing CP Brass 32mmsize BottleTrap of approved quality &make and as per the direction of Engineer-in-charge.
7
1003
7025.13
... More
code68 - ProvidingandfixingP.V.C.wastepipeforsinkorwashbasinincluding Flexiblepipe
8
113
911.92
... More
code69 - Providingandfixing600x450mmbevelededge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
10
1511
15115.8
... More
code70 - Providing and fixing Bibcock Twoway with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy
6
2388
14332.74
... More
code71 - Providingandfixing Health Faucet with all concealed fitting arrangements & all necessary accesories complete - Class
6
1770
10620
... More
code72 - Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineerin charge
16.8
1486
24978.24
... More
code73 - Providing and fixing chromium plated brass curtain rod with ISI mark having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P.brass screws and PVC sleeves etc.,wherever necessary complete. 25 mm dia.
7.2
950
6842.232
... More
code74 - Electrical Works: Supplying heavy gauge PVC conduit pipe 25mm dia, 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. Make: Avonplast/Bajajplast/VIP/
150
95
14337
... More
code75 - Supplying and fixing of 25 mm PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm .... etc. as required. Make: ModiPlast/ Prestoplast
100
41
4130
... More
code76 - Supplying GI flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely. Make: As aprpoved by the engineer-in-charge.
50
25
1298
... More
code77 - Supplying And Fixing Metal Fan Box with Round Hook. Make: As aprpoved by the engineer-in-charge.
5
25
129.8
... More
code78 - Point wiring using Copper wire without switch.: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase&Neutral) & 1x1.0 sqmm (Earthwire) FRLS multi strand PVC insulated copperwire(confirmingtoIS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gangbox, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box Make: As aprpoved by the engineer-in-charge.
8
317
2539.36
... More
code79 - Medium point above 3 Mtrs upto 6Mtrs from tapping point to out let via switch box
8
447
3577.76
... More
code80 - Long point above 6 Mtrs upto 10 Mtrs from tapping point to out let via switch box
8
654
5239.2
... More
code81 - Wiring for lighting/power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP of GROUP -A. Make: Finolex/Anchor/RR Kabel/Havells a) 1.5 Sqmm Multi Strand copper wire
270
30
8283.6
... More
code82 - 2.5 Sqmm Multi Strand copper wire
540
49
26762.4
... More
code83 - 4.0 Sqmm Multi Strand copper wire
360
74
26762.4
... More
code84 - Supplying and drawing 4C x 6 Sqmm Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990. Make: Finolex/Anchor/RR Kabel/Havells
100
387
38704
... More
code85 - Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wal Make: Anchor Woods/Crabtree/Legrand a) 2 Way
5
162
814.2
... More
code86 - 3 Way
6
187
1125.72
... More
code87 - 6 Way
4
259
1038.4
... More
code88 - 8 Way
2
307
615.96
... More
code89 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. Make: Anchor Woods/Crabtree/Legrand a) 6 Module
5
161
808.3
... More
code90 - 3 Module
6
189
1139.88
... More
code91 - 6 Module
4
276
1104.48
... More
code92 - 8 Module
2
335
670.24
... More
code93 - Supplying and fixing of modular switch/ Socket/ stepped electronic fan regulator/ dimmer/ telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 Make: Anchor Woods/Crabtree/Legrand a) 6 Amps one way switch
30
120
3610.8
... More
code94 - 6 Amps 3 way socket.
10
201
2017.8
... More
code95 - Stepped Fan Regulator Two Module
10
421
4212.6
... More
code96 - 16 Amps one way switch
5
212
1062
... More
code97 - 6/16 Amps Universal Socket
5
278
1392.4
... More
code98 - Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. Make: ABB/Legrand/Siemens a) 4 way SPN DB
2
1798
3596.64
... More
code99 - Supplying and fixing 32 amps TPN miniature circuit breaker on existing MCB distribution board using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. Make: Legrand/ABB/Siemens
2
2026
4052.12
... More
code100 - Supplying of 12" Sweep (300 mm) 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. Make: Bajaj/Crompron Greaves/Havells/ Usha
4
3503
14013.68
... More
code101 - Supplying of 15" Sweep (450 mm) 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. Make: Bajaj/Crompron Greaves/Havells/ Usha
4
5246
20985.12
... More
code102 - Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Make: Bajaj/Crompron Greaves/Havells/Usha
8
580
4644.48
... More
code103 - Supplying of 2 feet - PVC Batten with integrated LED tube 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. Make: Bajaj/Crompron Greaves/Havells/Philips/Wipro
10
650
6501.8
... More
code104 - Supplying of 4 feet - PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. Make: Bajaj/Crompron Greaves/Havells/Philips/Wipro
20
814
16284
... More
code105 - Supply of 18 W round surface mounted rolling type LED Down light with 18 W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @50/60Hz & Power factor greater than 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition. Make: Bajaj/Crompron Greaves/Havells/Philips/Wipro
30
1562
46869.6
... More
code106 - Supplying and fixing/replacing upto 4 mfd condenser for ceiling fan. Make: As approved
30
155
4672.8
... More
code107 - Rewinding a 1200 mm ceiling fan after using necessary gauge annealed and insulated copper wire with necessary insulating, separators vibration arresting shellac, etc including replacement of bearings if any transportation to and from the spot to workshop inclusive of releasing the refixing. Make: As approved
20
902
18054
... More
code108 - Supplying and fixing of T8 36/40W Fluorescent Tube with 36W power consumption with initial lumen of 2750 (3000 deg K / 4000 deg K) with rated avg life of greater than 10000 hrs. Operating voltage range from 180V to 265V. 50Hz AC power Supply Make: As approved
200
74
14868
... More
code109 - Supplying and fixing of 1 x 36/40 W Electronic Ballast suitable for T8 Lamp with housing made of Pre-coated steel/PC, Operating voltage range from 180V to 265V. 50Hz AC power Supply flicker free warm start with over voltage protection, Inrush current protection, De-activated lamp protection & End of Lamp life protection with PF greater than 0.95 & TC(deg C) greater than 65 deg C. Operating voltage range from 180V to 265V, 50Hz AC power Supply. Make: Bajaj/Crompton Greaves/ Havells/Philips/Wipro
100
631
63130
... More
code110 - Supplying & Fixing of 230 V 20/40 W starter for fluorescent Lamp Make: As approved
100
35
3540
... More
code111 - Supplying, fixing and wiring earth leakage relay (ELR) with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/manual reset facility suitable to mount on DIN rail/ flush mounting on panel board.
2
10920
21841.8
... More
code112 - Providing 6 Kg Fire Ex tinguisher Mono Ammonium Phos phate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 9.5 Kg, empty weight 3.5 Kg, Can Height 435MM, Diameter 160MM, Discharge Time less than 9 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,8,C and electrically started Fire, A Rating 3A, 8 Rating 218, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy PoIyster power coating, Sheet metal thickness: 1.60MM, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete. IS 15683 Approved, CE Marked Make: Andex/Ceasefire/Minimax
6
3363
20178
... More
code113 - Supplying of first aid box Complete.
2
708
1416
... More
code114 - Supplying of FIRST AID CHART with lamination complete.
2
472
944
... More
code115 - Supplying and installation of RUBBER MAT 1 Mtr x 1 Mtrs -10 mm thick complete.
4
2242
8968
... More
code116 - Supplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strip (except 2CX10Sq.mm wire armoured) confirming to IS-3975:1990 (No.of Strip indicated in GTP & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP-A. Make: Unistar/Havells/KEI/Ploycab 4 core x 16 Sqmm (11 GI Strips - 3.5 Core x 35 Sqmm (14 GI Strips - 4 x 0.8 mm)
65
181
11816.35
... More
code117 - 3.5 Core x 95 Sqmm (21 GI Strips - 4 x 0.8 mm)
140
440
61654.6
... More
code118 - Supplying of compression type Aluminium Tubular in Line Connector for Aluminum Conductor Compression type Aluminium Tubular in Line Connector for Aluminum Conductor. 35 Sqmm
8
4
37.76
... More
code119 - 95 Sqmm
8
14
113.28
... More
code120 - Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573. Make: Unistar/Havells/KEI/Ploycab 4 core x 95 Sqmm, 3.5/4 Core
1
1244
1244.9
... More
code121 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 Sqmm
65
24
1602.25
... More
code122 - 95 Sqmm
140
38
5332.6
... More
code123 - Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) In soil (soft)
205
106
21771
... More
code124 - Supplying of self-adhesive PVC electrical insulation tape - 1.70cm x 6.5m x 0.125mm, Black, 6.5 m. (Market Rates) Make: Anchor streel grip (100 nos of each colour i.e. Red/Yellow/Blue/Black/Green
500
15
7500
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements